- 26 Nov, 2021 1 commit
-
-
Sameer Pujar authored
After successful application of volume/mute settings via mixer control put calls, the control returns without balancing the runtime PM count. This makes device to be always runtime active. Fix this by allowing control to reach pm_runtime_put() call. Fixes: e539891f ("ASoC: tegra: Add Tegra210 based MVC driver") Cc: stable@vger.kernel.org Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1637676459-31191-2-git-send-email-spujar@nvidia.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 25 Nov, 2021 1 commit
-
-
David Heidelberg authored
Both, hardware and drivers does support interrupts. Fix warnings as: arch/arm/boot/dts/tegra30-microsoft-surface-rt-efi.dt.yaml: audio-codec@1a: 'interrupt-parent', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /home/runner/work/linux/linux/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml Fixes: cd51b942 ("ASoC: dt-bindings: wlf,wm8962: Convert to json-schema") Signed-off-by:
David Heidelberg <david@ixit.cz> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20211124155101.59694-1-david@ixit.czSigned-off-by:
-
- 24 Nov, 2021 2 commits
-
-
Ranjani Sridharan authored
It is not unusual for ALSA/ASoC hw_params callbacks to be invoked multiple times. Reset and free the DAI widget before reconfiguring it to keep the DAI widget use_count balanced. Fixes: 0acb48dd ("ASoC: SOF: Intel: hda: make sure DAI widget is set up before IPC") Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Paul Olaru <paul.olaru@oss.nxp.com> Reviewed-by:
Bard Liao <bard.liao@intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211123165759.127884-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
Lucas Tanure authored
Higher speeds are only supported when PLL is enabled, but the current driver doesn't enable PLL outside of stream use cases, so better to set the lowest SPI speed accepted by the entire device. Move the current frequency set to the spi sub-driver so the whole device can benefit from that speed. spi-max-frequency property could be used, but ACPI systems don't support it, so by setting it in the spi sub-driver probe both Device Trees and ACPI systems are supported. Signed-off-by:
Lucas Tanure <tanureal@opensource.cirrus.com> Reviewed-by:
-
- 23 Nov, 2021 1 commit
-
-
Pierre-Louis Bossart authored
We have configurations for this codec on APL, GLK, JSL and TGL, somehow the information that some designs rely on CometLake was not shared. BugLink: https://github.com/thesofproject/linux/issues/3248 Fixes: 790049fb ("ASoC: Intel: soc-acpi: apl/glk/tgl: add entry for devices based on ES8336 codec") Signed-off-by:
-
- 22 Nov, 2021 2 commits
-
-
Nicolas Frattaroli authored
Without a module alias, autoloading the driver does not occurr when it is built as a module. By adding a module alias, the driver now probes fine automatically and therefore analog audio output works as it should. Fixes: 0d6a04da ("ASoC: Add Rockchip rk817 audio CODEC support") Signed-off-by:
Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Link: https://lore.kernel.org/r/20211121150521.159543-1-frattaroli.nicolas@gmail.comSigned-off-by:
-
Hans de Goede authored
Commit dac7cbd5 ("ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs") and commit 959ae821 ("ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs") simplified the match tables in soc-acpi-intel-byt-match.c and soc-acpi-intel-cht-match.c by merging identical entries using the new .comp_ids snd_soc_acpi_mach field to point a single entry to multiple ACPI HIDs and clearing the previously unique per entry .id field. But various machine drivers from sound/soc/intel/boards rely on mach->id in one or more ways, e.g. some drivers contain the following snippets: adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, ... if (!strncmp(snd_soc_cards[i].codec_id, mach->id, 8)) { ... All of which are broken by the match table shrinking. Make the snd_soc_acpi_mach.id field non const (the storage for the tables already is non const) and on a comps_ids match copy the matching HID to the id field to fix this. Fixes: dac7cbd5 ("ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs") Fixes: 959ae821 ("ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs") Suggested-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
- 18 Nov, 2021 16 commits
-
-
Sameer Pujar authored
The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Filter out duplicate updates in Mixer driver. Fixes: 05bb3d5e ("ASoC: tegra: Add Tegra210 based Mixer driver") Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Suggested-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/1637219231-406-17-git-send-email-spujar@nvidia.comSigned-off-by:
-
Sameer Pujar authored
The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Filter out duplicate updates in ADX driver. Fixes: a99ab6f3 ("ASoC: tegra: Add Tegra210 based ADX driver") Signed-off-by:
-
Sameer Pujar authored
The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Filter out duplicate updates in AMX driver. Fixes: 77f7df34 ("ASoC: tegra: Add Tegra210 based AMX driver") Signed-off-by:
-
Sameer Pujar authored
The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Filter out duplicate updates in SFC driver. Fixes: b2f74ec5 ("ASoC: tegra: Add Tegra210 based SFC driver") Signed-off-by:
-
Sameer Pujar authored
The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Filter out duplicate updates in MVC driver. Fixes: e539891f ("ASoC: tegra: Add Tegra210 based MVC driver") Signed-off-by:
-
Sameer Pujar authored
The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Update the AHUB driver accordingly. Fixes: 16e1bcc2 ("ASoC: tegra: Add Tegra210 based AHUB driver") Signed-off-by:
-
Sameer Pujar authored
The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Update the DSPK driver accordingly. Fixes: 327ef647 ("ASoC: tegra: Add Tegra186 based DSPK driver") Suggested-by:
-
Sameer Pujar authored
The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Update the DMIC driver accordingly. Fixes: 8c8ff982 ("ASoC: tegra: Add Tegra210 based DMIC driver") Suggested-by:
-
Sameer Pujar authored
The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Update the I2S driver accordingly. Fixes: c0bfa983 ("ASoC: tegra: Add Tegra210 based I2S driver") Suggested-by:
-
Sameer Pujar authored
The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Update the ADMAIF driver accordingly. Fixes: f74028e1 ("ASoC: tegra: Add Tegra210 based ADMAIF driver") Suggested-by:
-
Sameer Pujar authored
The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: e539891f ("ASoC: tegra: Add Tegra210 based MVC driver") Suggested-by:
-
Sameer Pujar authored
The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: b2f74ec5 ("ASoC: tegra: Add Tegra210 based SFC driver") Suggested-by:
-
Sameer Pujar authored
The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: 327ef647 ("ASoC: tegra: Add Tegra186 based DSPK driver") Suggested-by:
-
Sameer Pujar authored
The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: 8c8ff982 ("ASoC: tegra: Add Tegra210 based DMIC driver") Suggested-by:
-
Sameer Pujar authored
The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: c0bfa983 ("ASoC: tegra: Add Tegra210 based I2S driver") Suggested-by:
-
Sameer Pujar authored
The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: f74028e1 ("ASoC: tegra: Add Tegra210 based ADMAIF driver") Suggested-by:
-
- 17 Nov, 2021 1 commit
-
-
Olivier Moysan authored
Fix divider calculation in the case of 32 bits channel configuration, when no master clock is used. Fixes: e4e6ec7b ("ASoC: stm32: Add I2S driver") Signed-off-by:
Olivier Moysan <olivier.moysan@foss.st.com> Link: https://lore.kernel.org/r/20211117104404.3832-1-olivier.moysan@foss.st.comSigned-off-by:
-
- 16 Nov, 2021 9 commits
-
-
Srinivas Kandagatla authored
For some reason we ended up using snd_soc_component_write_field for HPHL and snd_soc_component_update_bits for HPHR, so fix this. Fixes: af3d54b9 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114623.11891-4-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
Error returned from wcd934x_slim_set_hw_params() are not passed to upper layer, this could be misleading to the user which can start sending stream leading to unnecessary errors. Fix this by properly returning the errors. Fixes: a61f3b4f ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec") Signed-off-by:
-
Srinivas Kandagatla authored
Interrupt Clear registers WCD938X_INTR_CLEAR_0 - WCD938X_INTR_CLEAR_2 are not marked as volatile. This has resulted in a missing interrupt bug while performing runtime pm. regcache_sync() during runtime pm resume path will write to Interrupt clear registers with previous values which basically clears the pending interrupt and actual interrupt handler never sees this interrupt. This issue is more visible with headset plug-in plug-out case compared to headset button. Fix this by adding the Interrupt clear registers to volatile range Fixes: 8d78602a ("ASoC: codecs: wcd938x: add basic driver") Signed-off-by:
-
Takashi Iwai authored
snd_ctl_remove() has to be called with card->controls_rwsem held (when called after the card instantiation). This patch add the missing rwsem calls around it. Fixes: 8a978234 ("ASoC: topology: Add topology core") Signed-off-by:
-
Srinivas Kandagatla authored
Validate port id before it starts sending commands to dsp this would make error handling simpler. Signed-off-by:
-
Srinivas Kandagatla authored
reset value for port is -1 so printing an hex would not give us very useful debug information, so use %d instead. Signed-off-by:
-
Srinivas Kandagatla authored
Error handling in q6asm_dai_prepare() seems to be completely broken, Fix this by handling it properly. Fixes: 2a9e92d3 ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Signed-off-by:
-
Srinivas Kandagatla authored
Stream IDs are reused across multiple BackEnd mixers, do not reset the stream mixers if they are not already set for that particular FrontEnd. Ex: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below command will reset previously setup MultiMedia1 stream, because both of them are using MultiMedia1 PCM stream. amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0 reset the FrontEnd Mixers conditionally to fix this issue. This is more noticeable in desktop setup, where in alsactl tries to restore the alsa state and overwriting the previous mixer settings. Fixes: e3a33673 ("ASoC: qdsp6: q6routing: Add q6routing driver") Signed-off-by:
-
Srinivas Kandagatla authored
Q6PRM clks need to be disabled using PRM_CMD_RELEASE_HW_RSC dsp command rather then using PRM_CMD_RSP_REQUEST_HW_RSC cmd with rate set to zero. DSP will throw errors if we try to disable the clock using existing code. Fix this by properly handling the clk release. Fixes: 9a0e5d6f ("ASoC: qdsp6: audioreach: add q6prm support") Signed-off-by:
-
- 15 Nov, 2021 2 commits
-
-
Simon Trimmer authored
This patch fixes the static analysis warning as it is correctly indicating a possible code path, it cannot know that for the affected firmware versions subname would always be NULL. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Acked-by:
-
Mark Brown authored
Changes from ChiYuan Huang <cy_huang@richtek.com> to fix a couple of bugs and add a new device ID/quirk for the rt9120s to the driver.
-
- 12 Nov, 2021 5 commits
-
-
Kuninori Morimoto authored
commit d5bb69dc ("ASoC: sh: rcar: dma: : use proper DMAENGINE API for termination") updated DMAEngine API _all() to _sync(), but it should be _async(). _all() and _async() are almost same, the difference is only return error code. _sync() will call dmaengine_synchronize() and will be kernel panic. This patch is needed for v5.15 or later. [ 27.293264] BUG: scheduling while atomic: irq/130-ec70000/131/0x00000003 [ 27.300084] 2 locks held by irq/130-ec70000/131: [ 27.304743] #0: ffff0004c274d908 (&group->lock){....}-{2:2}, at: _snd_pcm_stream_lock_irqsave+0x48/0x54 [ 27.314344] #1: ffff0004c1788c60 (&priv->lock#2){....}-{2:2}, at: rsnd_soc_dai_trigger+0x70/0x7bc [ 27.323409] irq event stamp: 206 [ 27.326664] hardirqs last enabled at (205): [<ffff80001082de50>] _raw_spin_unlock_irq+0x50/0xa0 [ 27.335529] hardirqs last disabled at (206): [<ffff80001082d9e4>] _raw_spin_lock_irqsave+0xc4/0xd0 [ 27.344564] softirqs last enabled at (0): [<ffff800010037324>] copy_process+0x644/0x1b10 [ 27.352819] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 27.359142] CPU: 0 PID: 131 Comm: irq/130-ec70000 Not tainted 5.14.0-rc1+ #918 [ 27.366429] Hardware name: Renesas H3ULCB Kingfisher board based on r8a77950 (DT) [ 27.373975] Call trace: [ 27.376442] dump_backtrace+0x0/0x1b4 [ 27.380141] show_stack+0x24/0x30 [ 27.383488] dump_stack_lvl+0x8c/0xb8 [ 27.387184] dump_stack+0x18/0x34 [ 27.390528] __schedule_bug+0x8c/0x9c [ 27.394224] __schedule+0x790/0x8dc [ 27.397746] schedule+0x7c/0x110 [ 27.401003] synchronize_irq+0x94/0xd0 [ 27.404786] rcar_dmac_device_synchronize+0x20/0x2c [ 27.409710] rsnd_dmaen_stop+0x50/0x64 [ 27.413495] rsnd_soc_dai_trigger+0x554/0x7bc [ 27.417890] snd_soc_pcm_dai_trigger+0xe8/0x264 Cc: <stable@kernel.org> Fixes: commit d5bb69dc ("ASoC: sh: rcar: dma: : use proper DMAENGINE API for termination") Link: https://lore.kernel.org/r/TY2PR01MB3692889E1A7476C4322CC296D8AE9@TY2PR01MB3692.jpnprd01.prod.outlook.comReported-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87mtmfz36o.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Arnd Bergmann authored
With CONFIG_SND_SOC_SOF_COMPRESS=m, the compression code is not built into a the main SOF driver when that is built-in: x86_64-linux-ld: sound/soc/sof/ipc.o: in function `ipc_stream_message': ipc.c:(.text+0x5a2): undefined reference to `snd_sof_compr_fragment_elapsed' x86_64-linux-ld: sound/soc/sof/topology.o: in function `sof_dai_load': topology.c:(.text+0x32d1): undefined reference to `snd_sof_compr_init_elapsed_work' x86_64-linux-ld: topology.c:(.text+0x32e1): undefined reference to `snd_sof_compr_init_elapsed_work' Make this a 'bool' symbol so it just decides whether the code gets built at all. Fixes: 858f7a5c ("ASoC: SOF: Introduce fragment elapsed notification API") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
-
AngeloGioacchino Del Regno authored
When registering the mt8173-afe-pcm driver, we are also adding two components: one is for the PCM DAIs and one is for the HDMI DAIs, but when debugfs is enabled, we're getting the following issue: [ 17.279176] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present! [ 17.288345] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present! To overcome to that without any potentially big rewrite of this driver, similarly to what was done in mt8195-afe-pcm, add a debugfs_prefix to the components before actually adding them. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211111161108.502344-1-angelogioacchino.delregno@collabora.comSigned-off-by:
-
Derek Fang authored
Sometimes, end-users change the jack type under suspending, so it needs to re-detect the combo jack type after resuming to avoid any unexpected behaviors. Signed-off-by:
Derek Fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/20211109095450.12950-2-derek.fang@realtek.comSigned-off-by:
-
Derek Fang authored
When the system suspends, the codec driver will set SAR to power saving mode if a headset is plugged in. There is a chance to generate an unexpected IRQ, and leads to issues after resuming such as noise from OMTP type headsets. Signed-off-by:
-
