Handle DVI output on G450/G550.
Powerdown unused portions of G450/G550 DAC.
Split G450/G550 DAC from older DAC1064 handling.
Modify PLL setting when both CRTCs use same pixel clocks.

with failsafe settings discovered in the past.
Fixes corrupted screen display on some G100.

pointer to fb_info to pointers to matrox_fb_info.

fb_info* pointer for secondary head. Saves some typecasts.

than current solution with per-CRTC bitmaps.

Update some initializations to use C99 initializers.

table instead of using if-else branches in code. Source is cleaner, and generated
code is smaller with this change. By Denis Zaitsev <zzz@cd-club.ru>

We do not have any state stored here.

Simplify i2c-matroxfb code.

This implements CLONE_VM_RELEASE, which lets the child release the 'user
VM' at mm_release() time.

the attached patch implements the per-CPU thread-structure cache to do
detached exit, if the parent does not want to be notified of child exit
via a signal.

This adds two new clone() flags:

    CLONE_SETTLS => if present then the third clone() syscall parameter
                    is the new TLS.

    CLONE_SETTID => if present then the child TID is written to the
                    address specified by the fourth clone() parameter.

the new parameters are handled in a safe way, clone() returns -EFAULT or
-EINVAL if there's some problem with them.

Here is a trivial bug fix for blkdev_reread_part() in 2.5.31.
Without this fix,  "fdisk" hangs with following messages:

	Calling ioctl() to re-read partition table.

	WARNING: Re-reading the partition table failed with error 16:
			Device or resource busy.
	The kernel still uses the old table.
	The new table will be used at the next reboot.

This patch to 2.5.31 pushes "Networking options" and
"Network device support" together for all architectures
that have them.

They shouldn't be split apart by Telephony, I2O,
Fusion, etc.

This old __per_cpu_data define wasn't enough if an arch wants to
use the gcc __thread prefix (thread local storage), which needs to
go *before* the type in the definition.  So we have to go for a
DECLARE macro, and while we're there, separate DECLARE and DEFINE,
as definitions of per-cpu data cannot live in modules.  This also
means that accidental direct references to per-cpu variables will
be caught at compile time.

This makes introduces get_cpu_var()/put_cpu_var() which gets a
per-cpu variable and disables preemption, and renames the (unsafe
under preemption) "this_cpu()" macro to __get_cpu_var().  It also
deletes the redundant definitions in linux/smp.h.

As per Andrew Morton's request.

This moves the early ioremap call to after cpu_online_map is initialized.
Note everything is wrapped in clustered_apic_mode, so should be safe.

When you reverted the stringify changes I sent last time, you missed removing
a comment, which is now grossly wrong.  This patch finishes the job.

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux

Most syscall take a const char * argument in fact, also mark them extern.

This is part 3 of 3 of the genrtc patches.  This is my own slight bit
of work, as well as some work by Randolph Chung. This changes
set_rtc_time(struct *rtc_time) to return an int instead of void.
This was done so that the arch-specific code here could do additional
checks on the time and return an error if needed. This then introduces
include/asm-generic/rtc.h, include/asm-i386/rtc.h and
include/asm-alpha/rtc.h.  include/asm-generic/rtc.h contains the
get_rtc_time and set_rtc_time logic that is in drivers/char/rtc.c and
has been tested on SMP i386.  This also modifies include/asm-ppc/rtc.h
to return -ENODEV if no rtc hardware is present.

Additionally, Dave Jones pointed out to me a place where we might not be
safe when jiffies wraps, so this switches that to time_after().

From Randolph Chung, support for a 64bit kernel and a 32bit userland.

This is part 2 of 3 of the genrtc driver work.  This is the PPC portion
of the patch, which creates include/asm-ppc/rtc.h.  This has been in the
PPC bitkeeper tree for over a month now.

This is the current version of the genrtc driver from the m68k
community.  This is slightly different than the version I have sent
previously in that it has been switched to C99-style initializers,
which was done in the current m68k CVS tree by Geert Uytterhoeven, and
the needed changes to select/compile it in general.  I had previously
asked the m68k community if anyone objected to this being submitted by me,
and I got Richard Zidlicky's (who's at the top of the file) approval, as
well as Geert Uytterhoeven's approval.

i2c update:
 o Support for SMBus 2.0 PEC Packet Error Checking
 o New adapter-i2c-frodo for SA 1110 board
 o New adapter-i2c-rpx for embeded MPC8XX
 o Replace depreciated cli()&sti() with spin_{un}lock_irq()
 o Updated documentation

This patch adds sendfile() support to fatfs.

sys_sendfile() call,

    do_sendfile(out_fd, in_fd, &pos, count, MAX_NON_LFS);
        in_file->f_op->sendfile(out_file, in_file, ppos, count);

But,

ssize_t generic_file_sendfile(struct file *in_file, struct file *out_file,
			      loff_t *ppos, size_t count)

fist arg of generic_file_sendfile() should be for output. This patch
fixes this typo.

There are a number of places where generic_file_write could be used if
it didn't take i_sem by itself or where it doesn't need it:

(1)	XFS needs to do some preparation in it's write file operation
	(most notably taking it's own per-inode locks), after taking
	i_sem, but before calling the guts of generic_file_write.
(2)	blockdevices are happy with parralel get_block() operations,
	and there is nothing i_sem could protect.

This patch introduces a generic_file_write_nolock and makes the good old
generic_file_write a wrapper around.  The block device code is switched
over to it.

The old form of designated initializers are obsolete: we need to
replace them with the ISO C forms before 2.6.  Gcc has always supported
both forms anyway.

These are the completely generic bits (linux/init_task.h and linux/wait.h).

From: Art Haas <ahaas@neosoft.com>

  Here's the latest diffs for the files in include/linux.
  Patches are against 2.5.31.

The following patch from Anton Blanchard fixes a problem with the
sym53c8xx_2 driver in the 2.5 tree.  It assumes that the eh error
handlers are not called with the host lock held, which they are.

The code already copes with the possibility of having
read some of the 4byte length but not all, but can never
get into that situation.  We just need to add a 'return'
for the case where read got some data but not enough.
Either 0 or -EAGAIN could be returned, they both have the
same effect.

Now that we actually do shutdown the socket, we should
say so instead of just saying that we should....

Otherwise if you cannot stop and restart nfsd while a client holds a
connection.  Why this isn't the default I cannot imagine...

Currently svc_sock_setbuf can be called under a spinlock,
but it can try to lock a socket, which can block....

Now when we decide that changing the size might be good we
set a flag (SK_CHNGBUF) and then later (when the next
packet arrives) we change the sizes appropriately.