- 18 May, 2009 11 commits
-
-
Wang Tinggong authored
Signed-off-by: Wang Tinggong <wangtinggong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
roel kluin authored
FIFO1_DMA_ERR is set twice, the second should be FIFO2_DMA_ERR. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Ram Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gabriel Paubert authored
After 2.6.29, PPC no more admits passing NULL to the dev parameter of the DMA API. The result is a BUG followed by solid lock-up when the mv643xx_eth driver brings an interface up. The following patch makes the driver work on my Pegasos again; it is mostly a search and replace of NULL by mp->dev->dev.parent in dma allocation/freeing/mapping/unmapping functions. Signed-off-by: Gabriel Paubert <paubert@iram.es> Acked-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
One of the purposes of bonding is to allow for redundant links, and failover correctly if the cable is pulled. If all the members of a bonded device have no carrier present, the bonded device itself needs to report no carrier present to user space so management tools (like routing daemons) can respond. Bonding in 802.3ad mode does not work correctly for this because it incorrectly chooses a link that is down as a possible aggregator. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
Stephen Hemminger authored
If bridge is configured with no STP and forwarding delay of 0 (which is typical for virtualization) then when link starts it will flood all packets for the first 20 seconds. This bug was introduced by a combination of earlier changes: * forwarding database uses hold time of zero to indicate user wants to always flood packets * optimzation of the case of forwarding delay of 0 avoids the initial timer tick The fix is to just skip all the topology change detection code if kernel STP is not being used. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Currently the bridge catches all STP packets; even if STP is turned off. This prevents other systems (which do have STP turned on) from being able to detect loops in the network. With this patch, if STP is off, then any packet sent to the STP multicast group address is forwarded to all ports. Based on earlier patch by Joakim Tjernlund with changes to go through forwarding (not local chain), and optimization that only last octet needs to be checked. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ralf Baechle authored
Mixing of normal and irq spinlocks results in the following lockdep messages on bootup on IP32: [...] Sending DHCP requests . ====================================================== [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.30-rc5-00164-g41baeef #30 ------------------------------------------------------ swapper/1 [HC0[0]:SC0[1]:HE0:SE0] is trying to acquire: (&priv->meth_lock){+.+...}, at: [<ffffffff8026388c>] meth_tx+0x48/0x43c and this task is already holding: (_xmit_ETHER#2){+.-...}, at: [<ffffffff802d3a00>] __qdisc_run+0x118/0x30c which would create a new lock dependency: (_xmit_ETHER#2){+.-...} -> (&priv->meth_lock){+.+...} but this new dependency connects a SOFTIRQ-irq-safe lock: (_xmit_ETHER#2){+.-...} ... which became SOFTIRQ-irq-safe at: [<ffffffff80061458>] __lock_acquire+0x784/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff802d2b88>] dev_watchdog+0x70/0x398 [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248 [<ffffffff8003da5c>] __do_softirq+0xec/0x208 [<ffffffff8003dbd8>] do_softirq+0x60/0xe4 [<ffffffff8003dda0>] irq_exit+0x54/0x9c [<ffffffff80004420>] ret_from_irq+0x0/0x4 [<ffffffff80004720>] r4k_wait+0x20/0x40 [<ffffffff80015418>] cpu_idle+0x30/0x60 [<ffffffff804cd934>] start_kernel+0x3ec/0x404 to a SOFTIRQ-irq-unsafe lock: (&priv->meth_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... [<ffffffff800614f8>] __lock_acquire+0x824/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff80263f20>] meth_reset+0x118/0x2d8 [<ffffffff8026424c>] meth_open+0x28/0x140 [<ffffffff802c1ae8>] dev_open+0xe0/0x18c [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4 [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 other info that might help us debug this: 2 locks held by swapper/1: #0: (rcu_read_lock){.+.+..}, at: [<ffffffff802c0954>] dev_queue_xmit+0x1e0/0x4b0 #1: (_xmit_ETHER#2){+.-...}, at: [<ffffffff802d3a00>] __qdisc_run+0x118/0x30c the SOFTIRQ-irq-safe lock's dependencies: -> (_xmit_ETHER#2){+.-...} ops: 0 { HARDIRQ-ON-W at: [<ffffffff800614d0>] __lock_acquire+0x7fc/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff802d2b88>] dev_watchdog+0x70/0x398 [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248 [<ffffffff8003da5c>] __do_softirq+0xec/0x208 [<ffffffff8003dbd8>] do_softirq+0x60/0xe4 [<ffffffff8003dda0>] irq_exit+0x54/0x9c [<ffffffff80004420>] ret_from_irq+0x0/0x4 [<ffffffff80004720>] r4k_wait+0x20/0x40 [<ffffffff80015418>] cpu_idle+0x30/0x60 [<ffffffff804cd934>] start_kernel+0x3ec/0x404 IN-SOFTIRQ-W at: [<ffffffff80061458>] __lock_acquire+0x784/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff802d2b88>] dev_watchdog+0x70/0x398 [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248 [<ffffffff8003da5c>] __do_softirq+0xec/0x208 [<ffffffff8003dbd8>] do_softirq+0x60/0xe4 [<ffffffff8003dda0>] irq_exit+0x54/0x9c [<ffffffff80004420>] ret_from_irq+0x0/0x4 [<ffffffff80004720>] r4k_wait+0x20/0x40 [<ffffffff80015418>] cpu_idle+0x30/0x60 [<ffffffff804cd934>] start_kernel+0x3ec/0x404 INITIAL USE at: [<ffffffff80061570>] __lock_acquire+0x89c/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff802d2b88>] dev_watchdog+0x70/0x398 [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248 [<ffffffff8003da5c>] __do_softirq+0xec/0x208 [<ffffffff8003dbd8>] do_softirq+0x60/0xe4 [<ffffffff8003dda0>] irq_exit+0x54/0x9c [<ffffffff80004420>] ret_from_irq+0x0/0x4 [<ffffffff80004720>] r4k_wait+0x20/0x40 [<ffffffff80015418>] cpu_idle+0x30/0x60 [<ffffffff804cd934>] start_kernel+0x3ec/0x404 } ... key at: [<ffffffff80cf93f0>] netdev_xmit_lock_key+0x8/0x1c8 the SOFTIRQ-irq-unsafe lock's dependencies: -> (&priv->meth_lock){+.+...} ops: 0 { HARDIRQ-ON-W at: [<ffffffff800614d0>] __lock_acquire+0x7fc/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff80263f20>] meth_reset+0x118/0x2d8 [<ffffffff8026424c>] meth_open+0x28/0x140 [<ffffffff802c1ae8>] dev_open+0xe0/0x18c [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4 [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 SOFTIRQ-ON-W at: [<ffffffff800614f8>] __lock_acquire+0x824/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff80263f20>] meth_reset+0x118/0x2d8 [<ffffffff8026424c>] meth_open+0x28/0x140 [<ffffffff802c1ae8>] dev_open+0xe0/0x18c [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4 [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 INITIAL USE at: [<ffffffff80061570>] __lock_acquire+0x89c/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff80263f20>] meth_reset+0x118/0x2d8 [<ffffffff8026424c>] meth_open+0x28/0x140 [<ffffffff802c1ae8>] dev_open+0xe0/0x18c [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4 [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 } ... key at: [<ffffffff80cf6ce8>] __key.32424+0x0/0x8 stack backtrace: Call Trace: [<ffffffff8000ed0c>] dump_stack+0x8/0x34 [<ffffffff80060b74>] check_usage+0x470/0x4a0 [<ffffffff80060c34>] check_irq_usage+0x90/0x130 [<ffffffff80061f78>] __lock_acquire+0x12a4/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff80012a0c>] _spin_lock_irqsave+0x60/0x84 [<ffffffff8026388c>] meth_tx+0x48/0x43c [<ffffffff802d3a38>] __qdisc_run+0x150/0x30c [<ffffffff802c0aa8>] dev_queue_xmit+0x334/0x4b0 [<ffffffff804e7e6c>] ip_auto_config+0x8d0/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 ..... timed out! IP-Config: Retrying forever (NFS root)... Sending DHCP requests ., OK [...] Fixed by converting all locks to irq locks. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Tested-by: Andrew Randrianasulu <randrik_a@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yevgeny Petrilin authored
Napi structures are being created each time we open a port, but when the port is closed the napi structure is only disabled but not removed. This bug caused hang while removing the driver. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chris Friesen authored
If a DHCP server is delayed, it's possible for the client to receive the DHCPOFFER after it has already sent out a new DHCPDISCOVER message from a second interface. The client then sends out a DHCPREQUEST from the second interface, but the server doesn't recognize the device and rejects the request. This patch simply tracks the current device being configured and throws away the OFFER if it is not intended for the current device. A more sophisticated approach would be to put the OFFER information into the struct ic_device rather than storing it globally. Signed-off-by: Chris Friesen <cfriesen@nortel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
It looks like the dev in netpoll_poll can be NULL - at lease it's checked at the function beginning. Thus the dev->netde_ops dereference looks dangerous. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 May, 2009 1 commit
-
-
David S. Miller authored
-
- 16 May, 2009 16 commits
-
-
Linus Torvalds authored
Ian Campbell noticed that since "Eliminate thousands of warnings with gcc 3.2 build" (commit 57adc4d2) all WARN_ON()'s currently appear to come from warn_slowpath_null(), eg: WARNING: at kernel/softirq.c:143 warn_slowpath_null+0x1c/0x20() because now that warn_slowpath_null() is in the call path, the __builtin_return_address(0) returns that, rather than the place that caused the warning. Fix this by splitting up the warn_slowpath_null/fmt cases differently, using a common helper function, and getting the return address in the right place. This also happens to avoid the unnecessary stack usage for the non-stdargs case, and just generally cleans things up. Make the function name printout use %pS while at it. Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: piix: The Sony TZ90 needs the cable type hardcoding icside: register second channel of version 6 PCB ide-tape: remove back-to-back REQUEST_SENSE detection
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: Idle C-states disabled by max_cstate should not disable the TSC ACPI: idle: fix init-time TSC check regression ACPI processor: reset the throttling state once it's invalid ACPI processor: introduce module parameter processor.ignore_tpc ACPI, i915: build fix ACPI: suspend: restore BM_RLD on resume ACPI: resume: re-enable SCI-enable workaround thermal: fix off-by-1 error in trip point trigger condition eeepc-laptop: unregister_rfkill_notifier on failure asus-laptop: fix input keycode eeepc-laptop: support for super hybrid engine (SHE) eeepc-laptop: Work around rfkill firmware bug eeepc-laptop: report brightness control events via the input layer eeepc-laptop: fix wlan rfkill state change during init ACPI: suspend: don't let device _PS3 failure prevent suspend ACPI: power: update error message ACPI: video: DMI workaround another broken Acer BIOS enabling display brightness ACPICA: use acpi.* modparam namespace ACPI video: dmi check for broken _BQC on Acer Aspire 5720
-
Alan Cox authored
The Sony TZ90 needs the cable type hardcoding. See bug #12734 Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Jonathan E. Snow <jesnow@uh.edu> [bart: port it from ata_piix to piix and give reporter the proper credit] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Sergei Shtylyov authored
The second IDE channel of version 6 PCB is not being registered anymore since the commit 48c3c107 (ide: add struct ide_host (take 3)). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Tejun Heo authored
Impact: fix an oops which always triggers ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when checking for back-to-back request sense issues but drive->pc can be NULL and even when it's not NULL, it's not safe to dereference it once the previous command is complete because pc could have been freed or was on stack. Kill back-to-back REQUEST_SENSE detection. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Len Brown authored
Merge branches 'release', 'bugzilla-13032', 'bugzilla-13041+', 'bugzilla-13121', 'bugzilla-13165', 'bugzilla-13243', 'bugzilla-13259', 'resume-sci-en-regression', 'thermal-regression', 'tsc-regression' and 'asus-2.6.30' into release
-
Len Brown authored
Processor idle power states C2 and C3 stop the TSC on many machines. Linux recognizes this situation and marks the TSC as unstable: Marking TSC unstable due to TSC halts in idle But if those same machines are booted with "processor.max_cstate=1", then there is no need to validate C2 and C3, and no need to disable the TSC, which can be reliably used as a clocksource. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
-
Len Brown authored
A previous 2.6.30 patch, a71e4917, (ACPI: idle: mark_tsc_unstable() at init-time, not run-time) erroneously disabled the TSC on systems that did not actually have valid deep C-states. Move the check after the deep-C-states are validated, via new helper, tsc_check_state(), hich replaces tsc_halts_in_c(). Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Frans Pop <elendil@planet.nl>
-
Linus Torvalds authored
-
Zhang Rui authored
If the BIOS hands us an invalid throttling state, write a valid state. http://bugzilla.kernel.org/show_bug.cgi?id=13259Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: James Ettle <theholyettlz@googlemail.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Zhang Rui authored
Introduce module parameter processor.ignore_tpc. Some laptops are shipped with buggy _TPC, this module parameter is used to to disable the buggy support. http://bugzilla.kernel.org/show_bug.cgi?id=13259Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: James Ettle <theholyettlz@googlemail.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Len Brown authored
drivers/built-in.o: In function `intel_opregion_init': (.text+0x9d540): undefined reference to `acpi_video_register' http://bugzilla.kernel.org/show_bug.cgi?id=13165Signed-off-by: Len Brown <len.brown@intel.com>
-
Len Brown authored
In 2.6.29, 31878dd8 "ACPI: remove BM_RLD access from idle entry path" moved BM_RLD initialization to init-time from run time. But we discovered that some BIOS do not restore BM_RLD after suspend, causing device errors on C3 and C4 after resume. So now the kernel restores BM_RLD. http://bugzilla.kernel.org/show_bug.cgi?id=13032Signed-off-by: Len Brown <len.brown@intel.com>
-
Lin Ming authored
The BIOS bug workaround mistakenly got disabled when we followed the ACPI specification more closely by ignoring OS updates to that bit. (The BIOS is supposed to update SCI_EN, not the OS) http://bugzilla.kernel.org/show_bug.cgi?id=13289Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
- 15 May, 2009 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI MSI: Fix MSI-X with NIU cards PCI: Fix pci-e port driver slot_reset bad default return value
-
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6: Bluetooth: Don't trigger disconnect timeout for security mode 3 pairing Bluetooth: Don't use hci_acl_connect_cancel() for incoming connections Bluetooth: Fix wrong module refcount when connection setup fails Another case of me handling the fallout from Davem's unfortunate addiction to shuffleboard. Won't anybody think of the children? Join the anti-shuffleboard league today!
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl. drm/i915: Set HDMI hot plug interrupt enable for only the output in question. drm/i915: Include 965GME pci ID in IS_I965GM(dev) to match UMS. drm/i915: Use the GM45 VGA hotplug workaround on G45 as well. drm/i915: ignore LVDS on intel graphics systems that lie about having it drm/i915: sanity check IER at wait_request time drm/i915: workaround IGD i2c bus issue in kernel side (v2) drm/i915: Don't allow binding objects into the last page of the aperture. drm/i915: save/restore fence registers across suspend/resume drm/i915: x86 always has writeq. Add I915_READ64 for symmetry.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: Media rotation rate and form factor heuristics libata: Report disk alignment and physical block size sata_fsl: Fix the command description of FSL SATA controller sata_fsl: Fix compile warnings [libata] sata_sx4: fixup interrupt handling [libata] sata_sx4: convert to new exception handling methods
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6: iwlwifi: fix device id registration for 6000 series 2x2 devices ath5k: update channel in sw state after stopping RX and TX rtl8187: use DMA-aware buffers with usb_control_msg mac80211: avoid NULL ptr deref when finding max_rates in PID and minstrel airo: airo_get_encode{,ext} potential buffer overflow Pulled directly by Linus because Davem is off playing shuffle-board at some Alaskan cruise, and the NULL ptr deref issue hits people and should get merged sooner rather than later. David - make us proud on the shuffle-board tournament!
-
Martin K. Petersen authored
This patch provides new heuristics for parsing both the form factor and media rotation rate ATA IDENFITY words. The reported ATA version must be 7 or greater and the device must return values defined as valid in the standard. Only then are the characteristics reported to SCSI via the VPD B1 page. This seems like a reasonable compromise to me considering that we have been shipping several kernel releases that key off the rotation rate bit without any version checking whatsoever. With no complaints so far. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Martin K. Petersen authored
For disks with 4KB sectors, report the correct block size and alignment when filling out the READ CAPACITY(16) response. This patch is based upon code from Matthew Wilcox' 4KB ATA tree. I fixed the bug I reported a while back caused by ATA and SCSI using different approaches to describing the alignment. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dave Liu authored
The bit 11 of command description is reserved bit in Freescale SATA controller and needs to be set to '1'. This is needed to make sure the last write from the controller to the buffer descriptor is seen before an interrupt is raised. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Kumar Gala authored
We we build with dma_addr_t as a 64-bit quantity we get: drivers/ata/sata_fsl.c: In function 'sata_fsl_fill_sg': drivers/ata/sata_fsl.c:340: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t' Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
David Milburn authored
Issuing ATA_CMD_SET_FEATURES (0xef) times out because pdc20621_interrupt ignores command completion since ATA_TFLAG_POLLING flag is set. This has already been fixed for sata_promise: commit 51b94d2a Author: Tejun Heo <htejun@gmail.com> Date: Fri Jun 8 13:46:55 2007 -0700 sata_promise: use TF interface for polling NODATA commands Also, this patch includes Mikael's original patches: http://marc.info/?l=linux-ide&m=121135828227724&w=2 http://marc.info/?l=linux-ide&m=121144512109826&w=2Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Jeff Garzik authored
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Fix race in ext4_inode_info.i_cached_extent ext4: Clear the unwritten buffer_head flag after the extent is initialized ext4: Use a fake block number for delayed new buffer_head ext4: Fix sub-block zeroing for writes into preallocated extents
-