- 24 Aug, 2022 8 commits
-
-
Vadim Pasternak authored
Implement line card operation callbacks got_active() / got_inactive(). The purpose of these callback to create / remove line card ports after line card is getting active / inactive. Implement line ports_remove_selected() callback to support line card un-provisioning flow through 'devlink'. Add line card operation registration and de-registration APIs. Add module offset for line card. Offset for main board iz zero. For line card in slot #n offset is calculated as (#n - 1) multiplied by maximum modules number. Signed-off-by:
Vadim Pasternak <vadimp@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vadim Pasternak authored
The interfaces for ports found on line card are created and removed dynamically after line card is getting active or inactive. Introduce per line card array with module to port mapping. For each port get 'slot_index' through PMLP register and set port mapping for the relevant [slot_index][module] entry. Split module and port allocation into separate routines. Split per line card port creation and removing into separate routines. Motivation to re-use these routines for line card operations. Signed-off-by:
-
Vadim Pasternak authored
Perform ports allocation in a separate routine. Motivation is to re-use this routine for ports found on line cards. Signed-off-by:
-
Vadim Pasternak authored
Add 'slot_index' field to port structure. Replace zero slot_index argument with 'slot_index' in 'ethtool' related APIs. Add 'slot_index' argument to port initialization and de-initialization related APIs. Motivation is to prepare minimal driver for modular system support. Signed-off-by:
-
Vadim Pasternak authored
Extend i2c bus driver with interrupt handler to support system specific hotplug events, related to line card state change. Provide system IRQ line for interrupt handler. IRQ line Id could be provided through the platform data if available, or could be set to the default value. Signed-off-by:
-
Vadim Pasternak authored
Add line card system event handler. Register it with core. It is triggered by system interrupts raised from chassis programmable logic devices to CPU. The purpose is to handle line card state changes over I2C bus. Signed-off-by:
-
Vadim Pasternak authored
The purpose of system event handler is to handle system interrupts. Such interrupts are raised to CPU from system programmable logic devices, upon specific system wide changes, like line card activation and deactivation. The purpose is to create an alternative to trap mechanism, which delivers these events to driver over PCI bus, but not available for the driver working over I2C bus. Mechanism is system dependent and applicable only for the systems equipped with programmable devices with custom logic. Add APIs for event handler registration and un-registration and API which should be invoked from the registered callbacks when system interrupt is raised to CPU. Signed-off-by:
-
Vadim Pasternak authored
Currently, each line card is initialized using the following steps: 1. Initializing its various fields (e.g., slot index). 2. Creating the corresponding devlink object. 3. Enabling events (i.e., traps) for changes in line card status. 4. Querying and processing line card status. Unlike traps, the IRQ that notifies the CPU about line card status changes cannot be enabled / disabled on a per line card basis. If a handler is registered before the line cards are initialized, the handler risks accessing uninitialized memory. On the other hand, if the handler is registered after initialization, we risk missing events. For example, in step 4, the driver might see that a line card is in ready state and will tell the device to enable it. When enablement is done, the line card will be activated and the IRQ will be triggered. Since a handler was not registered, the event will be missed. Solve this by splitting the initialization sequence into two steps (1-2 and 3-4). In a subsequent patch, the handler will be registered between both steps. Signed-off-by:
-
- 23 Aug, 2022 32 commits
-
-
Jakub Kicinski authored
Provide a bit of a brain dump of netlink related information as documentation. Hopefully this will be useful to people trying to navigate implementing YAML based parsing in languages we won't be able to help with. I started writing this doc while trying to figure out what it'd take to widen the applicability of YAML to good old rtnl, but the doc grew beyond that as it usually happens. In all honesty a lot of this information is new to me as I usually follow the "copy an existing example, drink to forget" process of writing netlink user space, so reviews will be much appreciated. Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20220819200221.422801-2-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Subsequent patch will render the kdoc from include/uapi/linux/netlink.h into Documentation. We need to fix the warnings. While at it move the comments on struct nlmsghdr to a proper kdoc comment. Link: https://lore.kernel.org/r/20220819200221.422801-1-kuba@kernel.orgSigned-off-by:
-
Sergei Antonov authored
In case ftmac100 is used with a DSA switch, Linux wants to set MTU to 1504 to accommodate for DSA overhead. With the default max_mtu it leads to the error message: ftmac100 92000000.mac eth0: error -22 setting MTU to 1504 to include DSA overhead ftmac100 supports packet length 1518 (MAX_PKT_SIZE constant), so it is safe to report it in max_mtu. Signed-off-by:
Sergei Antonov <saproj@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220821160844.474277-1-saproj@gmail.comSigned-off-by:
-
Paolo Abeni authored
Vladimir Oltean says: ==================== DSA changes for multiple CPU ports (part 3) Those who have been following part 1: https://patchwork.kernel.org/project/netdevbpf/cover/20220511095020.562461-1-vladimir.oltean@nxp.com/ and part 2: https://patchwork.kernel.org/project/netdevbpf/cover/20220521213743.2735445-1-vladimir.oltean@nxp.com/ will know that I am trying to enable the second internal port pair from the NXP LS1028A Felix switch for DSA-tagged traffic via "ocelot-8021q". This series represents part 3 of that effort. Covered here are some preparations in DSA for handling multiple DSA masters: - when changing the tagging protocol via sysfs - when the masters go down as well as preparation for monitoring the upper devices of a DSA master (to support DSA masters under a LAG). There are also 2 small preparations for the ocelot driver, for the case where multiple tag_8021q CPU ports are used in a LAG. Both those changes have to do with PGID forwarding domains. Compared to v1, the patches were trimmed down to just another preparation stage, and the UAPI changes were pushed further out to part 4. https://patchwork.kernel.org/project/netdevbpf/cover/20220523104256.3556016-1-olteanv@gmail.com/ Compared to v2, I had to export a symbol I forgot to (ocelot_port_teardown_dsa_8021q_cpu), to avoid a build breakage when the felix and seville drivers are built as modules. ==================== Link: https://lore.kernel.org/r/20220819174820.3585002-1-vladimir.oltean@nxp.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Vladimir Oltean authored
Currently when we have 2 CPU ports configured for DSA tag_8021q mode and we put them in a LAG, a PGID dump looks like this: PGID_SRC[0] = ports 4, PGID_SRC[1] = ports 4, PGID_SRC[2] = ports 4, PGID_SRC[3] = ports 4, PGID_SRC[4] = ports 0, 1, 2, 3, 4, 5, PGID_SRC[5] = no ports (ports 0-3 are user ports, ports 4 and 5 are CPU ports) There are 2 problems with the configuration above: - user ports should enable forwarding towards both CPU ports, not just 4, and the aggregation PGIDs should prune one CPU port or the other from the destination port mask, based on a hash computed from packet headers. - CPU ports should not be allowed to forward towards themselves and also not towards other ports in the same LAG as themselves The first problem requires fixing up the PGID_SRC of user ports, when ocelot_port_assigned_dsa_8021q_cpu_mask() is called. We need to say that when a user port is assigned to a tag_8021q CPU port and that port is in a LAG, it should forward towards all ports in that LAG. The second problem requires fixing up the PGID_SRC of port 4, to remove ports 4 and 5 (in a LAG) from the allowed destinations. After this change, the PGID source masks look as follows: PGID_SRC[0] = ports 4, 5, PGID_SRC[1] = ports 4, 5, PGID_SRC[2] = ports 4, 5, PGID_SRC[3] = ports 4, 5, PGID_SRC[4] = ports 0, 1, 2, 3, PGID_SRC[5] = no ports Note that PGID_SRC[5] still looks weird (it should say "0, 1, 2, 3" just like PGID_SRC[4] does), but I've tested forwarding through this CPU port and it doesn't seem like anything is affected (it appears that PGID_SRC[4] is being looked up on forwarding from the CPU, since both ports 4 and 5 have logical port ID 4). The reason why it looks weird is because we've never called ocelot_port_assign_dsa_8021q_cpu() for any user port towards port 5 (all user ports are assigned to port 4 which is in a LAG with 5). Since things aren't broken, I'm willing to leave it like that for now and just document the oddity. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
This is a partial revert of commit c295f983 ("net: mscc: ocelot: switch from {,un}set to {,un}assign for tag_8021q CPU ports"), because as it turns out, this isn't how tag_8021q CPU ports under a LAG are supposed to work. Under that scenario, all user ports are "assigned" to the single tag_8021q CPU port represented by the logical port corresponding to the bonding interface. So one CPU port in a LAG would have is_dsa_8021q_cpu set to true (the one whose physical port ID is equal to the logical port ID), and the other one to false. In turn, this makes 2 undesirable things happen: (1) PGID_CPU contains only the first physical CPU port, rather than both (2) only the first CPU port will be added to the private VLANs used by ocelot for VLAN-unaware bridging To make the driver behave in the same way for both bonded CPU ports, we need to bring back the old concept of setting up a port as a tag_8021q CPU port, and this is what deals with VLAN membership and PGID_CPU updating. But we also need the CPU port "assignment" (the user to CPU port affinity), and this is what updates the PGID_SRC forwarding rules. All DSA CPU ports are statically configured for tag_8021q mode when the tagging protocol is changed to ocelot-8021q. User ports are "assigned" to one CPU port or the other dynamically (this will be handled by a future change). Signed-off-by:
-
Vladimir Oltean authored
More logic will be added to dsa_tree_setup_master() and dsa_tree_teardown_master() in upcoming changes. Reduce the indentation by one level in these functions by introducing and using a dedicated iterator for CPU ports of a tree. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
The fact that the tagging protocol is set and queried from the /sys/class/net/<dsa-master>/dsa/tagging file is a bit of a quirk from the single CPU port days which isn't aging very well now that DSA can have more than a single CPU port. This is because the tagging protocol is a switch property, yet in the presence of multiple CPU ports it can be queried and set from multiple sysfs files, all of which are handled by the same implementation. The current logic ensures that the net device whose sysfs file we're changing the tagging protocol through must be down. That net device is the DSA master, and this is fine for single DSA master / CPU port setups. But exactly because the tagging protocol is per switch [ tree, in fact ] and not per DSA master, this isn't fine any longer with multiple CPU ports, and we must iterate through the tree and find all DSA masters, and make sure that all of them are down. Signed-off-by:
-
Vladimir Oltean authored
This is an adaptation of commit c0a8a9c2 ("net: dsa: automatically bring user ports down when master goes down") for multiple DSA masters. When a DSA master goes down, only the user ports under its control should go down too, the others can still send/receive traffic. Signed-off-by:
-
Vladimir Oltean authored
All the traffic to/from a DSA master is supposed to be distributed among its DSA switch upper interfaces, so we should not allow other upper device kinds. An exception to this is DSA_TAG_PROTO_NONE (switches with no DSA tags), and in that case it is actually expected to create e.g. VLAN interfaces on the master. But for those, netdev_uses_dsa(master) returns false, so the restriction doesn't apply. The motivation for this change is to allow LAG interfaces of DSA masters to be DSA masters themselves. We want to restrict the user's degrees of freedom by 1: the LAG should already have all DSA masters as lowers, and while lower ports of the LAG can be removed, none can be added after the fact. Signed-off-by:
-
Vladimir Oltean authored
When DSA gains support for multiple CPU ports in a LAG, it will become mandatory to monitor the changeupper events for the DSA master. In fact, there are already some restrictions to be imposed in that area, namely that a DSA master cannot be a bridge port except in some special circumstances. Centralize the restrictions at the level of the DSA layer as a preliminary step. Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
-
Vladimir Oltean authored
dsa_slave_prechangeupper_sanity_check() is supposed to enforce some adjacency restrictions, and calls ds->ops->port_prechangeupper if the driver implements it. We convert the error code from the port_prechangeupper() call to a notifier code, and 0 is converted to NOTIFY_OK, but the caller of dsa_slave_prechangeupper_sanity_check() stops at any notifier code different from NOTIFY_DONE. Avoid this by converting back the notifier code to an error code, so that both NOTIFY_OK and NOTIFY_DONE will be seen as 0. This allows more parallel sanity check functions to be added. Signed-off-by:
-
Vladimir Oltean authored
Traditionally, DSA has had a single netdev notifier handling function for each device type. For the sake of code cleanliness, we would like to introduce more handling functions which do one thing, but the conditions for entering these functions start to overlap. Example: a handling function which tracks whether any bridges contain both DSA and non-DSA interfaces. Either this is placed before dsa_slave_changeupper(), case in which it will prevent that function from executing, or we place it after dsa_slave_changeupper(), case in which we will prevent it from executing. The other alternative is to ignore errors from the new handling function (not ideal). To support this usage, we need to change the pattern. In the new model, we enter all notifier handling sub-functions, and exit with NOTIFY_DONE if there is nothing to do. This allows the sub-functions to be relatively free-form and independent from each other. Signed-off-by:
-
Paolo Abeni authored
Arseniy Krasnov says: ==================== vsock: updates for SO_RCVLOWAT handling This patchset includes some updates for SO_RCVLOWAT: 1) af_vsock: During my experiments with zerocopy receive, i found, that in some cases, poll() implementation violates POSIX: when socket has non- default SO_RCVLOWAT(e.g. not 1), poll() will always set POLLIN and POLLRDNORM bits in 'revents' even number of bytes available to read on socket is smaller than SO_RCVLOWAT value. In this case,user sees POLLIN flag and then tries to read data(for example using 'read()' call), but read call will be blocked, because SO_RCVLOWAT logic is supported in dequeue loop in af_vsock.c. But the same time, POSIX requires that: "POLLIN Data other than high-priority data may be read without blocking. POLLRDNORM Normal data may be read without blocking." See https://www.open-std.org/jtc1/sc22/open/n4217.pdf, page 293. So, we have, that poll() syscall returns POLLIN, but read call will be blocked. Also in man page socket(7) i found that: "Since Linux 2.6.28, select(2), poll(2), and epoll(7) indicate a socket as readable only if at least SO_RCVLOWAT bytes are available." I checked TCP callback for poll()(net/ipv4/tcp.c, tcp_poll()), it uses SO_RCVLOWAT value to set POLLIN bit, also i've tested TCP with this case for TCP socket, it works as POSIX required. I've added some fixes to af_vsock.c and virtio_transport_common.c, test is also implemented. 2) virtio/vsock: It adds some optimization to wake ups, when new data arrived. Now, SO_RCVLOWAT is considered before wake up sleepers who wait new data. There is no sense, to kick waiter, when number of available bytes in socket's queue < SO_RCVLOWAT, because if we wake up reader in this case, it will wait for SO_RCVLOWAT data anyway during dequeue, or in poll() case, POLLIN/POLLRDNORM bits won't be set, so such exit from poll() will be "spurious". This logic is also used in TCP sockets. 3) vmci/vsock: Same as 2), but i'm not sure about this changes. Will be very good, to get comments from someone who knows this code. 4) Hyper-V: As Dexuan Cui mentioned, for Hyper-V transport it is difficult to support SO_RCVLOWAT, so he suggested to disable this feature for Hyper-V. ==================== Link: https://lore.kernel.org/r/de41de4c-0345-34d7-7c36-4345258b7ba8@sberdevices.ruSigned-off-by: -
Arseniy Krasnov authored
This adds test to check, that when poll() returns POLLIN, POLLRDNORM bits, next read call won't block. Signed-off-by:
Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Arseniy Krasnov authored
This adds extra condition to wake up data reader: do it only when number of readable bytes >= SO_RCVLOWAT. Otherwise, there is no sense to kick user, because it will wait until SO_RCVLOWAT bytes will be dequeued. This check is performed in vsock_data_ready(). Signed-off-by:
Vishnu Dasa <vdasa@vmware.com> Signed-off-by:
-
Arseniy Krasnov authored
This adds extra condition to wake up data reader: do it only when number of readable bytes >= SO_RCVLOWAT. Otherwise, there is no sense to kick user,because it will wait until SO_RCVLOWAT bytes will be dequeued. This check is performed in vsock_data_ready(). Signed-off-by:
-
Arseniy Krasnov authored
This adds 'vsock_data_ready()' which must be called by transport to kick sleeping data readers. It checks for SO_RCVLOWAT value before waking user, thus preventing spurious wake ups. Based on 'tcp_data_ready()' logic. Signed-off-by:
-
Arseniy Krasnov authored
Passing 1 as the target to notify_poll_in(), we don't honor what the user has set via SO_RCVLOWAT, going to set POLLIN and POLLRDNORM, even if we don't have the amount of bytes expected by the user. Let's use sock_rcvlowat() to get the right target to pass to notify_poll_in(); Signed-off-by:
-
Arseniy Krasnov authored
This callback controls setting of POLLIN, POLLRDNORM output bits of poll() syscall, but in some cases, it is incorrectly to set it, when socket has at least 1 bytes of available data. Use 'target' which is already exists. Signed-off-by:
-
Arseniy Krasnov authored
This callback controls setting of POLLIN, POLLRDNORM output bits of poll() syscall, but in some cases, it is incorrectly to set it, when socket has at least 1 bytes of available data. Use 'target' which is already exists. Signed-off-by:
-
Arseniy Krasnov authored
For Hyper-V it is quiet difficult to support this socket option,due to transport internals, so disable it. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
-
Arseniy Krasnov authored
This adds transport specific callback for SO_RCVLOWAT, because in some transports it may be difficult to know current available number of bytes ready to read. Thus, when SO_RCVLOWAT is set, transport may reject it. Signed-off-by:
-
Zhengchao Shao authored
In rtnetlink_rcv_msg function, the permission for all user operations is checked except the GET operation, which is the same as the checking in qdisc. Therefore, remove the user rights check in qdisc. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Message-Id: <20220819041854.83372-1-shaozhengchao@huawei.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-18 (ixgbe) This series contains updates to ixgbe driver only. Fabio M. De Francesco replaces kmap() call to page_address() for rx_buffer->page(). Jeff Daly adds a manual AN-37 restart to help resolve issues with some link partners. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ixgbe: Manual AN-37 for troublesome link partners for X550 SFI ixgbe: Don't call kmap() on page allocated with GFP_ATOMIC ==================== Link: https://lore.kernel.org/r/20220818223402.1294091-1-anthony.l.nguyen@intel.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-18 (ice) This series contains updates to ice driver only. Jesse and Anatolii add support for controlling FCS/CRC stripping via ethtool. Anirudh allows for 100M speeds on devices which support it. Sylwester removes ucast_shared field and the associated dead code related to it. Mikael removes non-inclusive language from the driver. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: remove non-inclusive language ice: Remove ucast_shared ice: Allow 100M speeds for some devices ice: Implement FCS/CRC and VLAN stripping co-existence policy ice: Implement control of FCS/CRC stripping ==================== Link: https://lore.kernel.org/r/20220818155207.996297-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Vladimir Oltean authored
Since commit 129bd7ca ("net: dsa: Prevent usage of NET_DSA_TAG_8021Q as tagging protocol"), dsa_8021q_netdev_ops no longer exists, so remove the comment that talks about it. Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210228.8635-1-wsa+renesas@sang-engineering.comSigned-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
-
