- 20 May, 2024 1 commit
-
-
Shenghao Ding authored
TAS2552 is a Smartamp with I/V sense data, add TX path to support capturing I/V data. Fixes: 38803ce7 ("ASoC: codecs: tas*: merge .digital_mute() into .mute_stream()") Signed-off-by:
Shenghao Ding <shenghao-ding@ti.com> Link: https://msgid.link/r/20240518033515.866-1-shenghao-ding@ti.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 15 May, 2024 1 commit
-
-
Zhang Yi authored
We got an error report about headphone type detection and button detection. We fixed the headphone type detection error by adjusting the condition of setting es8326->hp to 0.And we fixed the button detection error by adjusting micbias and vref. Signed-off-by:
Zhang Yi <zhangyi@everest-semi.com> Link: https://msgid.link/r/20240515062517.23661-1-zhangyi@everest-semi.comSigned-off-by:
-
- 14 May, 2024 2 commits
-
-
Jack Yu authored
Modify mic-in detection threshold for better performance. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://msgid.link/r/b7614d9e38054aa6ad8efa620edb4162@realtek.comSigned-off-by:
-
Peter Ujfalusi authored
Match against the correct string to decide to add the '-sdca' postfix: instead of codec_dai->name the correct one is component->name_prefix. The component->name_prefix is added previously to the card->components as hs. Fixes: 9a9d31b1 ("ASoC: Intel: sof_sdw_rt_sdca_jack_common: remove -sdca for new codecs") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240513140730.27048-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
- 10 May, 2024 20 commits
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset should be the last batch for this kernel cycle! Brent Lu continued his cleanups to refactor and use fewer machine drivers on Chrmebooks. Bard Liao updated the sof-sdw machine driver to deal with UCM support of the RT712 configuration. Note that this sof-sdw driver will be refactored in the next kernel cycle to allow AMD and others to reuse common SoundWire parts that are not Intel-specific. Initial changes are described here: https://github.com/thesofproject/linux/pull/4967
-
Bard Liao authored
enumeration_complete will be completed when a peripheral is attached. And initialization_complete will be completed when a peripheral is initialized. rt715_dev_resume() should wait for initialization_complete instead of enumeration_complete. the issue exists since commit 20d17057 ("ASoC: rt715-sdca: Add RT715 sdca vendor-specific driver"), but the commit can only apply to commit f892e66f ("ASoC: rt-sdw*: add __func__ to all error logs"). Fixes: f892e66f ("ASoC: rt-sdw*: add __func__ to all error logs") Signed-off-by:
-
Bard Liao authored
get_codec_name_and_route() get dai name from the first codec dai in a dai link. However, the dai may not always be the first codec dai. Use the dai parameter to make sure get_codec_name_and_route() refers to the correct dai. Reviewed-by:
-
Bard Liao authored
A generic .rtd_init() callback could be used by different dais. It is useful to pass dai parameter to the callback. The dai parameter will be used in the follow up commit. No functional change here. Reviewed-by:
-
Bard Liao authored
sof_sdw_rtd_init() will add the controls and widgets if we set them in the codec_info. Move the additions from .rtd_init callback to sof_sdw_rtd_init(). Reviewed-by:
-
Bard Liao authored
Currently, we add card controls and dapm widgets one by one in the codec_info->dais->rtd_init callback. Duplicated controls and dapm widgets will be added if there are more than one types of amps in the dai link. Moving it to sof_sdw_rtd_init() and only add the controls/widgets of the first codec dai can avoid the duplications. Reviewed-by:
-
Bard Liao authored
Some controls and widgets have exactly the same items. Rename them to be generic. This is a preparation for further cleanup. No function change. Reviewed-by:
-
Bard Liao authored
To be consistent to other amps that used in the machine driver. Reviewed-by:
-
Brent Lu authored
Since there is dai link helper max_98373_dai_link, we could change all functions and data of max98373 to static. Reviewed-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
-
Brent Lu authored
Add dapm routes of max98373 to sdw driver and remove dependency of maxim-common module. Reviewed-by:
-
Brent Lu authored
Use max_98373_dai_link() function to initialize dai link of maxim max98373 speaker amplifier. No functional change. Reviewed-by:
-
Brent Lu authored
Use max_98373_dai_link() function to initialize dai link of maxim max98373 speaker amplifier. No functional change. Reviewed-by:
-
Brent Lu authored
Use max_98373_dai_link() function to initialize dai link of maxim max98373 speaker amplifier. No functional change. Reviewed-by:
-
Brent Lu authored
Add a helper function, max_98373_dai_link(), for machine driver to initialize dai link of maxim max98373 speaker amplifier. Reviewed-by:
-
Bard Liao authored
cs42l43 is on link 0. No amp in this configuration, will use cs42l43 speaker or bridge. Signed-off-by:
-
Bard Liao authored
cs42l43 is on link 0. No amp in this configuration, will use cs42l43 speaker or bridge. Signed-off-by:
-
Brent Lu authored
The original code for rt1015p could support 1 or 2 rt1015p device instances in ACPI. However, all designs implement only 1 instance in ACPI table so we remove the code segment which is for 2 instances. Reviewed-by:
-
Brent Lu authored
Since mtl chromebook is using DMI quirk for board config, changing the SSP port config of mtl_rt5682_def to RVP to simplify mtl board id and enumeration table. Reviewed-by:
-
Brent Lu authored
The quirk for cml chromebook hatch could be removed since we have cml_rt5682_def board id now. Reviewed-by:
-
Bard Liao authored
Realtek new SoundWire codecs are all -sdca version. No need to add -sdca to distinguish the non-sdca version. To be consistent with "spk:" and "mic:" components string, remove "-sdca" suffix from "hs:" components string. Reviewed-by:
-
- 09 May, 2024 2 commits
-
-
Mark Brown authored
Merge series from Takashi Iwai <tiwai@suse.de>: Hi, here is a trivial patch series to add the missing module descriptions to ASoC drivers, as make W=1 starts complaining the lack of MODULE_DESCRIPTION() since recently. The whole sound/soc/sof/* are untouched as there are too many files involved, and I left SOF people to address them. thanks, Takashi === Takashi Iwai (7): ASoC: ab8500: Add missing module description ASoC: sigmadsp: Add missing module description ASoC: qcom: Add missing module descriptions ASoC: dmaengine: Add missing module description ASoC: topology-test: Add missing module description ASoC: ux500: Add missing module description ASoC: xilinx: Add missing module descriptions sound/soc/codecs/ab8500-codec.c | 1 + sound/soc/codecs/sigmadsp.c | 1 + sound/soc/qcom/common.c | 2 ++ sound/soc/qcom/qdsp6/q6dsp-common.c | 2 ++ sound/soc/soc-generic-dmaengine-pcm.c | 1 + sound/soc/soc-topology-test.c | 1 + sound/soc/ux500/ux500_msp_dai.c | 1 + sound/soc/xilinx/xlnx_formatter_pcm.c | 2 ++ sound/soc/xilinx/xlnx_i2s.c | 1 + 9 files changed, 12 insertions(+) -- 2.43.0
-
Kuninori Morimoto authored
"lnk" is used as "port0", and it will be used to get "port1" by of_get_next_child(ports, lnk). It will call of_node_put() inside. This function is calling of_node_get() to make up for it, but it doesn't call paired of_node_put(port0) when it quit function. This of_node_get() itself is not needed, let's remove it. Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87jzk3akoo.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
- 08 May, 2024 14 commits
-
-
Mark Brown authored
Merge series from Takashi Iwai <tiwai@suse.de>: This is a series of trivial cleanup patches for ASoC to correct the *-objs suffix in Makefile. The other ALSA code has been covered by a previous patch set https://lore.kernel.org/r/20240507135513.14919-1-tiwai@suse.de As was suggested in a patch review, *-objs suffix in Makefile is basically a wrong use nowadays for kernel driver modules. They should be replaced with *-y suffix instead. This is a result of systematic conversions, separated per directory. Only lightly compile-tested.
-
Takashi Iwai authored
Now that make W=1 starts complaining the lack of MODULE_DESCRIPTION(), let's add the missing information. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/ZjpQm-hxLQtpgkUx@smile.fi.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20240508091909.27062-8-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Now that make W=1 starts complaining the lack of MODULE_DESCRIPTION(), let's add the missing information. Suggested-by:
-
Takashi Iwai authored
Now that make W=1 starts complaining the lack of MODULE_DESCRIPTION(), let's add the missing information. Suggested-by:
-
Takashi Iwai authored
Now that make W=1 starts complaining the lack of MODULE_DESCRIPTION(), let's add the missing information. Suggested-by:
-
Takashi Iwai authored
Now that make W=1 starts complaining the lack of MODULE_DESCRIPTION(), let's add the missing information. Suggested-by:
-
Takashi Iwai authored
Now that make W=1 starts complaining the lack of MODULE_DESCRIPTION(), let's add the missing information. Suggested-by:
-
Takashi Iwai authored
Now that make W=1 starts complaining the lack of MODULE_DESCRIPTION(), let's add the missing information. Suggested-by:
-
Andy Shevchenko authored
of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by:
-
Takashi Iwai authored
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by:
-
Takashi Iwai authored
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by:
-
Takashi Iwai authored
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by:
-
Takashi Iwai authored
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by:
-
Takashi Iwai authored
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by:
-
