Declare Rx VLAN filtering as supported and user-changeable only when
there are VLAN filtering entries available on the DPNI object. Even
then, rx-vlan-filtering is by default disabled.
Also, populate the .ndo_vlan_rx_add_vid() and .ndo_vlan_rx_kill_vid()
callbacks for adding and removing a specific VLAN from the VLAN table.
Signed-off-by: Ionut-robert Aron <ionut-robert.aron@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210111170725.1818218-1-ciorneiioana@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch adds support to install flow rules using ipv4 proto or
ipv6 next header field to distinguish between tcp/udp/sctp/esp/ah
flows when user doesn't specify the other match creteria related to
the flow such as tcp/udp/sctp source port and destination port, ah/esp
spi value. This is achieved by matching the layer type extracted by
NPC HW into the search key. Modified the driver to use Ethertype as
match criteria when user doesn't specify source IP address and dest
IP address. The esp/ah flow rule matching using security parameter
index (spi) is not supported as of now since the field is not extracted
into MCAM search key. Modified npc_check_field function to return bool.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20210111112537.3277-1-naveenm@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Replace the check for ETH_P_8021Q and ETH_P_8021AD in
__netif_receive_skb_core with eth_type_vlan.
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Link: https://lore.kernel.org/r/20210111104221.3451-1-dong.menglong@zte.com.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 updates 2021-01-07

Misc updates series for mlx5 driver:

1) From Eli and Jianbo, E-Switch cleanups and usage of new
   FW capability for mpls over udp

2) Paul Blakey, Adds support for mirroring with Connection tracking
by splitting rules to pre and post Connection tracking to perform the
mirroring.

3) Roi Dayan, cleanups for connection tracking

4) From Tariq, Cleanups and improvements to IPSec
====================

Link: https://lore.kernel.org/r/20210112070534.136841-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

MLX5_IPSEC_DEV() is always defined, no need to protect it under config
flag CONFIG_MLX5_EN_IPSEC, especially in slow path.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Huy Nguyen <huyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Feature check functions are in the TX fast-path of all SKBs, not only
IPsec traffic.
Move the IPsec feature check function into a header and turn it inline.
Use a stub and clean the config flag condition in Eth main driver file.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Huy Nguyen <huyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Simple code improvement, move default return operation under
the #else block.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Huy Nguyen <huyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

All IPsec logic should be wrapped under the compile flag,
including its checksum logic.
Introduce an inline function in ipsec datapath header,
with a corresponding stub.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Huy Nguyen <huyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The zone member is of type u16 so there is no reason to apply
the zone mask on it. This is also matching the call to set a
match in other places which don't need and don't apply the mask.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

miss_rule and prio_s args are not being referenced before assigned
so there is no need to init them.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

No need to pass zero spec to mlx5_add_flow_rules() as the
function can handle null spec.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported

Miss path handling of tc multi chain filters (i.e. filters that are
defined on chain > 0) requires the hardware to communicate to the
driver the last chain that was processed. This is possible only when
the hardware is capable of performing the combination of modify header
and forward to table actions. Currently, if the hardware is missing
this capability then the driver only offloads rules that are defined
on tc chain 0 prio 1. However, this restriction can be relaxed because
packets that miss from chain 0 are processed through all the
priorities by tc software.

Allow the offload of all the supported priorities for chain 0 even
when the hardware is not capable to perform modify header and goto
table actions.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use tunnel_stateless_mpls_over_udp instead of
MLX5_FLEX_PROTO_CW_MPLS_UDP since new devices have native support for
mpls over udp and do not rely on flex parser.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

esw->qos.enabled will only be true if both MLX5_CAP_GEN(dev, qos) and
MLX5_CAP_QOS(dev, esw_scheduling) are true. Therefore, remove them from
the condition in and rely only on esw->qos.enabled.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add capability bit to test whether reg_c value is preserved on
recirculation.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix the following coccicheck warning:
./net/nfc/hci/llc_shdlc.c:239:5-21: WARNING: Comparison to bool
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Link: https://lore.kernel.org/r/1610357063-57705-1-git-send-email-abaci-bugfix@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Oleksij Rempel says:

====================
net: dsa: add stats64 support

changes v8:
- stats.no_handler should not be assigned from HW stats

changes v7:
- move raw.filtered from rx_errors to rx_dropped counter

changes v6:
- move stats64 callback to ethtool section
- ar9331: diff. fixes
- ar9331: move stats calculation to the worker
- ar9331: extend rx/tx error counters
- use spin lock instead of u64_stats*

changes v5:
- read all stats in one regmap_bulk_read() request
- protect stats with u64_stats* helpers.

changes v4:
- do no read MIBs withing stats64 call
- change polling frequency to 0.3Hz

changes v3:
- fix wrong multiplication
- cancel port workers on remove

changes v2:
- use stats64 instead of get_ethtool_stats
- add worked to poll for the stats
====================

Link: https://lore.kernel.org/r/20210111104658.21930-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add stats support for the ar9331 switch.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Allow DSA drivers to export stats64
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The IPA driver depends on some SMEM functionality (qcom_smem_init(),
qcom_smem_alloc(), and qcom_smem_virt_to_phys()), but this is not
reflected in the configuration dependencies.  Add a dependency on
QCOM_SMEM to avoid attempts to build the IPA driver without SMEM.
This avoids a link error for certain configurations.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 38a4066f ("net: ipa: support COMPILE_TEST")
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210112192134.493-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Set proper value to IF_MODE register for MII mode.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20210111043903.8044-1-fido_max@inbox.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add debugfs support to SFP so that the internal state of the SFP state
machines and hardware signal state can be viewed from userspace, rather
than having to compile a debug kernel to view state transitions in the
kernel log.  The 'state' output looks like:

Module state: empty
Module probe attempts: 0 0
Device state: up
Main state: down
Fault recovery remaining retries: 5
PHY probe remaining retries: 12
moddef0: 0
rx_los: 1
tx_fault: 1
tx_disable: 1
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1kyYRe-0004kN-3F@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Long Li says:

====================
hv_netvsc: Prevent packet loss during VF add/remove

This patch set fixes issues with packet loss on VF add/remove.
====================

Link: https://lore.kernel.org/r/1610153623-17500-1-git-send-email-longli@linuxonhyperv.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On VF hot remove, NETDEV_GOING_DOWN is sent to notify the VF is about to
go down. At this time, the VF is still sending/receiving traffic and we
request the VSP to switch datapath.

On completion, the datapath is switched to synthetic and we can proceed
with VF hot remove.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The completion indicates if NVSP_MSG4_TYPE_SWITCH_DATA_PATH has been
processed by the VSP. The traffic is steered to VF or synthetic after we
receive this completion.
Signed-off-by: Long Li <longli@microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The driver needs to check if the datapath has been switched to VF before
sending traffic to VF.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s/oen/one/
s/controling/controlling/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210112103152.13222-1-unixbhaskar@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Heiner Kallweit says:

====================
r8169: further improvements

Series includes further smaller improvements.
====================

Link: https://lore.kernel.org/r/1bc3b7ef-b54a-d517-df54-27d61ca7ba94@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of doing the full DASH check each time r8168_check_dash() is
called, let's do it once in probe and store DASH capabilities in a
new rtl8169_private member.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extend the mask to include the checksum failure bits. This allows to
simplify the condition in rtl8169_rx_csum().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

At least from chip version 25 the vendor driver sets these rx flags
for all chip versions if WOL is enabled. Therefore I wouldn't consider
it a quirk, so let's rename the function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The PHYLIB must be selected to provide mdiobus_*() functions, and the
MICREL_PHY is necessary too, as that is the only possible PHY attached
to the KS8851 (it is the internal PHY).

Fixes: ef363122 ("net: ks8851: Register MDIO bus and the internal PHY")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210111125046.36326-1-marex@denx.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Patch didn't fix any issue, just improve parse flow
and align ipv4 parse flow with ipv6 parse flow.

Currently ipv4 kenguru parser first check IP protocol(TCP/UDP)
and then destination IP address.
Patch introduce reverse ipv4 parse, first destination IP address parsed
and only then IP protocol.
This would allow extend capability for packet L4 parsing and align ipv4
parsing flow with ipv6.
Suggested-by: Liron Himi <liron@marvell.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1610289059-14962-1-git-send-email-stefanc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

List of things fixed:
  - Two of the socket options were idented with spaces instead of tabs.
  - Trailing whitespace in some lines.
  - Improper spacing around parenthesis caught by checkpatch.pl.
  - Mix of space and tabs in tcp_word_hdr union.
Signed-off-by: Danilo Carvalho <doak@google.com>
Link: https://lore.kernel.org/r/20210108222104.2079472-1-doak@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

bareudp_dellink() only needs the device list to hand it to
unregister_netdevice_queue(). We can pass NULL in, and
unregister_netdevice_queue() will do the unregistering.
There is no chance for batching on the error path, anyway.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/20210111052922.2145003-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Heiner Kallweit says:

====================
r8169: improve PLL power-down handling

This series includes improvements to handling of PLL power-down.
====================

Link: https://lore.kernel.org/r/1608dfa3-c4a5-0e92-31f7-76674b3c173a@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Clean up the remainings of rtl_pll_power_down/up and rename
rtl_pll_power_down() to rtl_prepare_power_down().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Realtek provided a description of bits 6 and 7 in register PMCH.
They configure whether the chip powers down certain PLL in D3hot and
D3cold respectively. They do not actually power down the PLL.
Reflect this in the code and configure D3 PLL powerdown based on
whether WOL is enabled.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There's no known reason why PLL powerdown on D3 shouldn't be enabled
on chip versions 34, 35, 36, and 42. At least the vendor driver doesn't
exclude any of these chip versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of open-coding unaligned access let's use the predefined
unaligned access helpers.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/cfaf9176-e4f9-c32d-4d4d-e8fb52009f35@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>