- 14 Jan, 2021 18 commits
-
-
Jakub Kicinski authored
To make maintainers' lives easier we're trying to nudge people towards CCing all the relevant folks on patches, in an attempt to improve review rate. We have a check in patchwork which validates the CC list against get_maintainers.pl. It's a little awkward, however, to force people to CC maintainers who we haven't seen on the mailing list for years. This series removes from maintainers folks who didn't provide any tag (incl. authoring a patch) in the last 5 years. To ensure reasonable signal to noise ratio we only considered MAINTAINERS entries which had more than 100 patches fall under them in that time period. All this is purely a process-greasing exercise, I hope nobody sees this series as an affront. Most folks are moved to CREDITS, a couple entries are simply removed. The following inactive maintainers are kept, because they indicated the intention to come back in the near future: - Veaceslav Falico (bonding) - Christian Benvenuti (Cisco drivers) - Felix Fietkau (mtk-eth) - Mirko Linder (skge/sky2) Patches in this series contain report from a script which did the analysis. Big thanks to Jonathan Corbet for help and writing the script (although I feel like I used it differently than Jon may have intended ;)). The output format is thus: Subsystem $name Changes $reviewed / $total ($percent%) // how many changes to the subsystem had at least one ack/review Last activity: $date_of_most_recent_patch $maintainer/reviewer1: Author $last_commit_authored_by_the_person $how_many_in_5yrs Committer $last_committed $how_many Tags $last_tag_like_review_signoff_etc $how_many $maintainer/reviewer2: Author $last_commit_authored_by_the_person $how_many_in_5yrs Committer $last_committed $how_many Tags $last_tag_like_review_signoff_etc $how_many Top reviewers: // Top 3 reviewers (who are not listed in MAINTAINERS) [$count_of_reviews_and_acks]: $email INACTIVE MAINTAINER $name // maintainer / reviewer who has done nothing in last 5yrs v2: - keep Felix and Mirko Link: https://lore.kernel.org/r/20210114014912.2519931-1-kuba@kernel.orgSigned-off-by:Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
As far as I can tell we haven't heard from Gerrit for roughly 5 years now. DCCP patch would really benefit from some review. Gerrit was the last maintainer so mark this entry as orphaned. Subsystem DCCP PROTOCOL Changes 38 / 166 (22%) (No activity) Top reviewers: [6]: kstewart@linuxfoundation.org [6]: allison@lohutok.net [5]: edumazet@google.com INACTIVE MAINTAINER Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: -
Jakub Kicinski authored
Move Wensong Zhang to credits, we haven't heard from him in years. Subsystem IPVS Changes 83 / 226 (36%) Last activity: 2020-11-27 Wensong Zhang <wensong@linux-vs.org>: Simon Horman <horms@verge.net.au>: Committer c24b75e0 2019-10-24 00:00:00 33 Tags 7980d2ea 2020-10-12 00:00:00 76 Julian Anastasov <ja@ssi.bg>: Author 7980d2ea 2020-10-12 00:00:00 26 Tags 4bc3c8dc 2020-11-27 00:00:00 78 Top reviewers: [6]: horms+renesas@verge.net.au INACTIVE MAINTAINER Wensong Zhang <wensong@linux-vs.org> Signed-off-by: -
Jakub Kicinski authored
Aviad wrote parts of the initial TLS implementation but hasn't been contributing to TLS since. Subsystem NETWORKING [TLS] Changes 123 / 308 (39%) Last activity: 2020-12-01 Boris Pismenny <borisp@nvidia.com>: Tags 138559b9 2020-11-17 00:00:00 1 Aviad Yehezkel <aviadye@nvidia.com>: John Fastabend <john.fastabend@gmail.com>: Author e91de6af 2020-06-01 00:00:00 22 Tags e91de6af 2020-06-01 00:00:00 29 Daniel Borkmann <daniel@iogearbox.net>: Author c16ee04c 2018-10-20 00:00:00 7 Committer b8e202d1 2020-02-21 00:00:00 19 Tags b8e202d1 2020-02-21 00:00:00 28 Jakub Kicinski <kuba@kernel.org>: Author 5c39f26e 2020-11-27 00:00:00 89 Committer d31c0800 2020-12-01 00:00:00 15 Tags d31c0800 2020-12-01 00:00:00 117 Top reviewers: [50]: dirk.vandermerwe@netronome.com [26]: simon.horman@netronome.com [14]: john.hurley@netronome.com INACTIVE MAINTAINER Aviad Yehezkel <aviadye@nvidia.com> Signed-off-by: -
Jakub Kicinski authored
While ENA has 3 reviewers and 2 maintainers, we mostly see review tags and comments from the maintainers. While we very much appreciate Zorik's invovment in the community let's trim the reviewer list down to folks we've seen tags from. Subsystem AMAZON ETHERNET DRIVERS Changes 13 / 269 (4%) Last activity: 2020-11-24 Netanel Belgazal <netanel@amazon.com>: Author 24dee0c7 2019-12-10 00:00:00 43 Tags 0e3a3f6d 2020-07-21 00:00:00 47 Arthur Kiyanovski <akiyano@amazon.com>: Author 0e3a3f6d 2020-07-21 00:00:00 79 Tags 09323b3b 2020-11-24 00:00:00 104 Guy Tzalik <gtzalik@amazon.com>: Tags 713865da 2020-09-10 00:00:00 3 Saeed Bishara <saeedb@amazon.com>: Tags 470793a7 2020-02-11 00:00:00 2 Zorik Machulsky <zorik@amazon.com>: Top reviewers: [4]: sameehj@amazon.com [3]: snelson@pensando.io [3]: shayagr@amazon.com INACTIVE MAINTAINER Zorik Machulsky <zorik@amazon.com> Signed-off-by: -
Jakub Kicinski authored
Shrijeet has moved on from VRF-related work. Subsystem VRF Changes 30 / 120 (25%) Last activity: 2020-12-09 David Ahern <dsahern@kernel.org>: Author 1b6687e3 2020-07-23 00:00:00 1 Tags 9125abe7 2020-12-09 00:00:00 4 Shrijeet Mukherjee <shrijeet@gmail.com>: Top reviewers: [13]: dsahern@gmail.com [4]: dsa@cumulusnetworks.com INACTIVE MAINTAINER Shrijeet Mukherjee <shrijeet@gmail.com> Signed-off-by: -
Jakub Kicinski authored
Move Alexey to CREDITS. I am probably not giving him enough justice with the description line.. Subsystem NETWORKING [IPv4/IPv6] Changes 1535 / 5111 (30%) Last activity: 2020-12-10 "David S. Miller" <davem@davemloft.net>: Author b7e4ba9a 2020-12-09 00:00:00 407 Committer e0fecb28 2020-12-10 00:00:00 3992 Tags e0fecb28 2020-12-10 00:00:00 3978 Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>: Tags d5d8760b 2016-06-16 00:00:00 8 Top reviewers: [225]: edumazet@google.com [222]: dsahern@gmail.com [176]: ncardwell@google.com INACTIVE MAINTAINER Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: -
Jakub Kicinski authored
Jay was not active in recent years and does not have plans to return to work on ATLX drivers. Subsystem ATLX ETHERNET DRIVERS Changes 20 / 116 (17%) Last activity: 2020-02-24 Jay Cliburn <jcliburn@gmail.com>: Chris Snook <chris.snook@gmail.com>: Tags ea973742 2020-02-24 00:00:00 1 Top reviewers: [4]: andrew@lunn.ch [2]: kuba@kernel.org [2]: o.rempel@pengutronix.de INACTIVE MAINTAINER Jay Cliburn <jcliburn@gmail.com> Acked-by:Chris Snook <chris.snook@gmail.com> Signed-off-by:
-
Eric Dumazet authored
Both virtio net and napi_get_frags() allocate skbs with a very small skb->head While using page fragments instead of a kmalloc backed skb->head might give a small performance improvement in some cases, there is a huge risk of under estimating memory usage. For both GOOD_COPY_LEN and GRO_MAX_HEAD, we can fit at least 32 allocations per page (order-3 page in x86), or even 64 on PowerPC We have been tracking OOM issues on GKE hosts hitting tcp_mem limits but consuming far more memory for TCP buffers than instructed in tcp_mem[2] Even if we force napi_alloc_skb() to only use order-0 pages, the issue would still be there on arches with PAGE_SIZE >= 32768 This patch makes sure that small skb head are kmalloc backed, so that other objects in the slab page can be reused instead of being held as long as skbs are sitting in socket queues. Note that we might in the future use the sk_buff napi cache, instead of going through a more expensive __alloc_skb() Another idea would be to use separate page sizes depending on the allocated length (to never have more than 4 frags per page) I would like to thank Greg Thelen for his precious help on this matter, analysing crash dumps is always a time consuming task. Fixes: fd11a83d ("net: Pull out core bits of __netdev_alloc_skb and add __napi_alloc_skb") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Greg Thelen <gthelen@google.com> Reviewed-by:
Alexander Duyck <alexanderduyck@fb.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210113161819.1155526-1-eric.dumazet@gmail.comSigned-off-by:
-
Geert Uytterhoeven authored
In general, device drivers should not be enabled by default. Fixes: 657bc1d1 ("r8153_ecm: avoid to be prior to r8152 driver") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210113144309.1384615-1-geert+renesas@glider.beSigned-off-by:
-
Yannick Vignon authored
The Synopsys TSN MAC supports Qbv base times in the past, but only up to a certain limit. As a result, a taprio qdisc configuration with a small base time (for example when treating the base time as a simple phase offset) is not applied by the hardware and silently ignored. This was observed on an NXP i.MX8MPlus device, but likely affects all TSN-variants of the MAC. Fix the issue by making sure the base time is in the future, pushing it by an integer amount of cycle times if needed. (a similar check is already done in several other taprio implementations, see for example drivers/net/ethernet/intel/igc/igc_tsn.c#L116 or drivers/net/dsa/sja1105/sja1105_ptp.h#L39). Fixes: b60189e0 ("net: stmmac: Integrate EST with TAPRIO scheduler API") Signed-off-by:
Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20210113131557.24651-2-yannick.vignon@oss.nxp.comSigned-off-by:
-
Yannick Vignon authored
When configuring a 802.1Qbv schedule through the tc taprio qdisc on an NXP i.MX8MPlus device, the effective cycle time differed from the requested one by N*96ns, with N number of entries in the Qbv Gate Control List. This is because the driver was adding a 96ns margin to each interval of the GCL, apparently to account for the IPG. The problem was observed on NXP i.MX8MPlus devices but likely affected all devices relying on the same configuration callback (dwmac 4.00, 4.10, 5.10 variants). Fix the issue by removing the margins, and simply setup the MAC with the provided cycle time value. This is the behavior expected by the user-space API, as altering the Qbv schedule timings would break standards conformance. This is also the behavior of several other Ethernet MAC implementations supporting taprio, including the dwxgmac variant of stmmac. Fixes: 504723af ("net: stmmac: Add basic EST support for GMAC5+") Signed-off-by:
-
Mauro Carvalho Chehab authored
A function has a different name between their prototype and its kernel-doc markup: ../net/tipc/link.c:2551: warning: expecting prototype for link_reset_stats(). Prototype was for tipc_link_reset_stats() instead ../net/tipc/node.c:1678: warning: expecting prototype for is the general link level function for message sending(). Prototype was for tipc_node_xmit() instead Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
-
Jakub Kicinski authored
We need to unregister the netdevice if config failed. .ndo_uninit takes care of most of the heavy lifting. This was uncovered by recent commit c269a24c ("net: make free_netdev() more lenient with unregistering devices"). Previously the partially-initialized device would be left in the system. Reported-and-tested-by: syzbot+2393580080a2da190f04@syzkaller.appspotmail.com Fixes: e2f1f072 ("sit: allow to configure 6rd tunnels via netlink") Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20210114012947.2515313-1-kuba@kernel.orgSigned-off-by:
-
David Wu authored
Since the original mtu is not used when the mtu is updated, the mtu is aligned with cache, this will get an incorrect. For example, if you want to configure the mtu to be 1500, but mtu 1536 is configured in fact. Fixed: eaf4fac4 ("net: stmmac: Do not accept invalid MTU values") Signed-off-by:
David Wu <david.wu@rock-chips.com> Link: https://lore.kernel.org/r/20210113034109.27865-1-david.wu@rock-chips.comSigned-off-by:
-
Ayush Sawal authored
TID stuck is seen when there is a race in CPL_PASS_ACCEPT_RPL/CPL_ABORT_REQ and abort is arriving before the accept reply, which sets the queue number. In this case HW ends up sending CPL_ABORT_RPL_RSS to an incorrect ingress queue. V1->V2: - Removed the unused variable len in chtls_set_quiesce_ctrl(). V2->V3: - As kfree_skb() has a check for null skb, so removed this check before calling kfree_skb() in func chtls_send_reset(). Fixes: cc35c88a ("crypto : chtls - CPL handler definition") Signed-off-by:
Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by:
Ayush Sawal <ayush.sawal@chelsio.com> Link: https://lore.kernel.org/r/20210112053600.24590-1-ayush.sawal@chelsio.comSigned-off-by:
-
Cristian Dumitrescu authored
Currently, the function i40e_construct_skb_zc only frees the input xdp buffer when the output skb is successfully built. On error, the function i40e_clean_rx_irq_zc does not commit anything for the current packet descriptor and simply exits the packet descriptor processing loop, with the plan to restart the processing of this descriptor on the next invocation. Therefore, on error the ring next-to-clean pointer should not advance, the xdp i.e. *bi buffer should not be freed and the current buffer info should not be invalidated by setting *bi to NULL. Therefore, the *bi should only be set to NULL when the function i40e_construct_skb_zc is successful, otherwise a NULL *bi will be dereferenced when the work for the current descriptor is eventually restarted. Fixes: 3b4f0b66 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL") Signed-off-by:
Cristian Dumitrescu <cristian.dumitrescu@intel.com> Acked-by:
Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/r/20210111181138.49757-1-cristian.dumitrescu@intel.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.11-20210113' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-01-13 The first patch is by Oliver Hartkopp for the CAn ISO-TP protocol and fixes a kernel information leak to userspace. The last patch is by Qinglang Miao for the mcp251xfd driver and fixes a NULL pointer check to work on the correct variable. * tag 'linux-can-fixes-for-5.11-20210113' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check can: isotp: isotp_getname(): fix kernel information leak ==================== Link: https://lore.kernel.org/r/20210113212158.925513-1-mkl@pengutronix.deSigned-off-by:
-
- 13 Jan, 2021 20 commits
-
-
Seb Laveze authored
Use of __napi_schedule_irqoff() is not safe with PREEMPT_RT in which hard interrupts are not disabled while running the threaded interrupt. Using __napi_schedule() works for both PREEMPT_RT and mainline Linux, just at the cost of an additional check if interrupts are disabled for mainline (since they are already disabled). Similar to the fix done for enetc commit 215602a8 ("enetc: use napi_schedule to be compatible with PREEMPT_RT") Signed-off-by:
Seb Laveze <sebastien.laveze@nxp.com> Link: https://lore.kernel.org/r/20210112140121.1487619-1-sebastien.laveze@oss.nxp.comSigned-off-by:
-
Qinglang Miao authored
If alloc_canfd_skb() returns NULL, 'cfg' is an uninitialized variable, so we should check 'skb' rather than 'cfd' after calling alloc_canfd_skb(priv->ndev, &cfd). Fixes: 55e5b97f ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210113073100.79552-1-miaoqinglang@huawei.comSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Oliver Hartkopp authored
Initialize the sockaddr_can structure to prevent a data leak to user space. Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Reported-by: syzbot+057884e2f453e8afebc8@syzkaller.appspotmail.com Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol") Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20210112091643.11789-1-socketcan@hartkopp.netSigned-off-by:
-
Baptiste Lepers authored
The call state may be changed at any time by the data-ready routine in response to received packets, so if the call state is to be read and acted upon several times in a function, READ_ONCE() must be used unless the call state lock is held. As it happens, we used READ_ONCE() to read the state a few lines above the unmarked read in rxrpc_input_data(), so use that value rather than re-reading it. Fixes: a158bdd3 ("rxrpc: Fix call timeouts") Signed-off-by:
Baptiste Lepers <baptiste.lepers@gmail.com> Signed-off-by:
David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/161046715522.2450566.488819910256264150.stgit@warthog.procyon.org.ukSigned-off-by:
-
David Howells authored
Clang static analysis reports the following: net/rxrpc/key.c:657:11: warning: Assigned value is garbage or undefined toksize = toksizes[tok++]; ^ ~~~~~~~~~~~~~~~ rxrpc_read() contains two consecutive loops. The first loop calculates the token sizes and stores the results in toksizes[] and the second one uses the array. When there is an error in identifying the token in the first loop, the token is skipped, no change is made to the toksizes[] array. When the same error happens in the second loop, the token is not skipped. This will cause the toksizes[] array to be out of step and will overrun past the calculated sizes. Fix this by making both loops log a message and return an error in this case. This should only happen if a new token type is incompletely implemented, so it should normally be impossible to trigger this. Fixes: 9a059cd5 ("rxrpc: Downgrade the BUG() for unsupported token type in rxrpc_read()") Reported-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Pass conntrack -f to specify family in netfilter conntrack helper selftests, from Chen Yi. 2) Honor hashsize modparam from nf_conntrack_buckets sysctl, from Jesper D. Brouer. 3) Fix memleak in nf_nat_init() error path, from Dinghao Liu. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nf_nat: Fix memleak in nf_nat_init netfilter: conntrack: fix reading nf_conntrack_buckets selftests: netfilter: Pass family parameter "-f" to conntrack tool ==================== Link: https://lore.kernel.org/r/20210112222033.9732-1-pablo@netfilter.orgSigned-off-by:
-
Jakub Kicinski authored
Karsten Graul says: ==================== net/smc: fix out of bound access in netlink interface Both patches fix possible out-of-bounds reads. The original code expected that snprintf() reads len-1 bytes from source and appends the terminating null, but actually snprintf() first copies len bytes and finally overwrites the last byte with a null. Fix this by using memcpy() and terminating the string afterwards. ==================== Link: https://lore.kernel.org/r/20210112162122.26832-1-kgraul@linux.ibm.comSigned-off-by:
-
Guvenc Gulce authored
Using snprintf() to convert not null-terminated strings to null terminated strings may cause out of bounds read in the source string. Therefore use memcpy() and terminate the target string with a null afterwards. Fixes: a3db10ef ("net/smc: Add support for obtaining SMCR device list") Signed-off-by:
Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Jakub Kicinski authored
smc_clc_get_hostname() sets the host pointer to a buffer which is not NULL-terminated (see smc_clc_init()). Reported-by: syzbot+f4708c391121cfc58396@syzkaller.appspotmail.com Fixes: 099b990b ("net/smc: Add support for obtaining system information") Signed-off-by:
-
Jakub Kicinski authored
Paolo Abeni says: ==================== mptcp: a couple of fixes This series includes two related fixes addressing potential divide by 0 bugs in the MPTCP datapath. ==================== Link: https://lore.kernel.org/r/cover.1610471474.git.pabeni@redhat.comSigned-off-by:
-
Paolo Abeni authored
Instead of re-implementing most of inet_shutdown, re-use such helper, and implement the MPTCP-specific bits at the 'proto' level. The msk-level disconnect() can now be invoked, lets provide a suitable implementation. As a side effect, this fixes bad state management for listener sockets. The latter could lead to division by 0 oops since commit ea4ca586 ("mptcp: refine MPTCP-level ack scheduling"). Fixes: 43b54c6e ("mptcp: Use full MPTCP-level disconnect state machine") Fixes: ea4ca586 ("mptcp: refine MPTCP-level ack scheduling") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
Syzkaller found a way to trigger division by zero in mptcp_subflow_cleanup_rbuf(). The current checks implemented into tcp_can_send_ack() are too week, let's be more accurate. Reported-by:
Christoph Paasch <cpaasch@apple.com> Fixes: ea4ca586 ("mptcp: refine MPTCP-level ack scheduling") Fixes: fd897679 ("mptcp: be careful on MPTCP-level ack.") Signed-off-by:
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Bug fixes. This series has 2 fixes. The first one fixes a resource accounting error with the RDMA driver loaded and the second one fixes the firmware flashing sequence after defragmentation. ==================== Link: https://lore.kernel.org/r/1610357200-30755-1-git-send-email-michael.chan@broadcom.comSigned-off-by:
-
Pavan Chebbi authored
When the FW tells the driver to retry the INSTALL_UPDATE command after it has cleared the NVM area, the driver is not clearing the previously used ALLOWED_TO_DEFRAG flag. As a result the FW tries to defrag the NVM area a second time in a loop and can fail the request. Fixes: 1432c3f6 ("bnxt_en: Retry installing FW package under NO_SPACE error condition.") Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
The function bnxt_get_ulp_stat_ctxs() does not count the stats contexts used by the RDMA driver correctly when the RDMA driver is freeing the MSIX vectors. It assumes that if the RDMA driver is registered, the additional stats contexts will be needed. This is not true when the RDMA driver is about to unregister and frees the MSIX vectors. This slight error leads to over accouting of the stats contexts needed after the RDMA driver has unloaded. This will cause some firmware warning and error messages in dmesg during subsequent config. changes or ifdown/ifup. Fix it by properly accouting for extra stats contexts only if the RDMA driver is registered and MSIX vectors have been successfully requested. Fixes: c027c6b4 ("bnxt_en: get rid of num_stat_ctxs variable") Reviewed-by:
Yongping Zhang <yongping.zhang@broadcom.com> Reviewed-by:
-
Leon Schuermann authored
This commit enables the use of the r8153_ecm driver, introduced with commit c1aedf01 ("net/usb/r8153_ecm: support ECM mode for RTL8153") for the Lenovo Powered USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip. This results in the following driver preference: - if r8152 is available, use the r8152 driver - if r8152 is not available, use the r8153_ecm driver This is done to prevent the NIC from constantly sending pause frames when the host system enters standby (fixed by using the r8152 driver in "r8152: Add Lenovo Powered USB-C Travel Hub"), while still allowing the device to work with the r8153_ecm driver as a fallback. Signed-off-by:
Leon Schuermann <leon@is.currently.online> Tested-by:
-
Leon Schuermann authored
This USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip used to use the cdc_ether driver. However, using this driver, with the system suspended the device constantly sends pause-frames as soon as the receive buffer fills up. This causes issues with other devices, where some Ethernet switches stop forwarding packets altogether. Using the Realtek driver (r8152) fixes this issue. Pause frames are no longer sent while the host system is suspended. Signed-off-by:
-
Vladimir Oltean authored
Florian reported a use-after-free bug in devlink_nl_port_fill found with KASAN: (devlink_nl_port_fill) (devlink_port_notify) (devlink_port_unregister) (dsa_switch_teardown.part.3) (dsa_tree_teardown_switches) (dsa_unregister_switch) (bcm_sf2_sw_remove) (platform_remove) (device_release_driver_internal) (device_links_unbind_consumers) (device_release_driver_internal) (device_driver_detach) (unbind_store) Allocated by task 31: alloc_netdev_mqs+0x5c/0x50c dsa_slave_create+0x110/0x9c8 dsa_register_switch+0xdb0/0x13a4 b53_switch_register+0x47c/0x6dc bcm_sf2_sw_probe+0xaa4/0xc98 platform_probe+0x90/0xf4 really_probe+0x184/0x728 driver_probe_device+0xa4/0x278 __device_attach_driver+0xe8/0x148 bus_for_each_drv+0x108/0x158 Freed by task 249: free_netdev+0x170/0x194 dsa_slave_destroy+0xac/0xb0 dsa_port_teardown.part.2+0xa0/0xb4 dsa_tree_teardown_switches+0x50/0xc4 dsa_unregister_switch+0x124/0x250 bcm_sf2_sw_remove+0x98/0x13c platform_remove+0x44/0x5c device_release_driver_internal+0x150/0x254 device_links_unbind_consumers+0xf8/0x12c device_release_driver_internal+0x84/0x254 device_driver_detach+0x30/0x34 unbind_store+0x90/0x134 What happens is that devlink_port_unregister emits a netlink DEVLINK_CMD_PORT_DEL message which associates the devlink port that is getting unregistered with the ifindex of its corresponding net_device. Only trouble is, the net_device has already been unregistered. It looks like we can stub out the search for a corresponding net_device if we clear the devlink_port's type. This looks like a bit of a hack, but also seems to be the reason why the devlink_port_type_clear function exists in the first place. Fixes: 3122433e ("net: dsa: Register devlink ports before calling DSA driver setup()") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
-
Vladimir Oltean authored
Currently the following happens when a DSA master driver unbinds while there are DSA switches attached to it: $ echo 0000:00:00.5 > /sys/bus/pci/drivers/mscc_felix/unbind ------------[ cut here ]------------ WARNING: CPU: 0 PID: 392 at net/core/dev.c:9507 Call trace: rollback_registered_many+0x5fc/0x688 unregister_netdevice_queue+0x98/0x120 dsa_slave_destroy+0x4c/0x88 dsa_port_teardown.part.16+0x78/0xb0 dsa_tree_teardown_switches+0x58/0xc0 dsa_unregister_switch+0x104/0x1b8 felix_pci_remove+0x24/0x48 pci_device_remove+0x48/0xf0 device_release_driver_internal+0x118/0x1e8 device_driver_detach+0x28/0x38 unbind_store+0xd0/0x100 Located at the above location is this WARN_ON: /* Notifier chain MUST detach us all upper devices. */ WARN_ON(netdev_has_any_upper_dev(dev)); Other stacked interfaces, like VLAN, do indeed listen for NETDEV_UNREGISTER on the real_dev and also unregister themselves at that time, which is clearly the behavior that rollback_registered_many expects. But DSA interfaces are not VLAN. They have backing hardware (platform devices, PCI devices, MDIO, SPI etc) which have a life cycle of their own and we can't just trigger an unregister from the DSA framework when we receive a netdev notifier that the master unregisters. Luckily, there is something we can do, and that is to inform the driver core that we have a runtime dependency to the DSA master interface's device, and create a device link where that is the supplier and we are the consumer. Having this device link will make the DSA switch unbind before the DSA master unbinds, which is enough to avoid the WARN_ON from rollback_registered_many. Note that even before the blamed commit, DSA did nothing intelligent when the master interface got unregistered either. See the discussion here: https://lore.kernel.org/netdev/20200505210253.20311-1-f.fainelli@gmail.com/ But this time, at least the WARN_ON is loud enough that the upper_dev_link commit can be blamed. The advantage with this approach vs dev_hold(master) in the attached link is that the latter is not meant for long term reference counting. With dev_hold, the only thing that will happen is that when the user attempts an unbind of the DSA master, netdev_wait_allrefs will keep waiting and waiting, due to DSA keeping the refcount forever. DSA would not access freed memory corresponding to the master interface, but the unbind would still result in a freeze. Whereas with device links, graceful teardown is ensured. It even works with cascaded DSA trees. $ echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind [ 1818.797546] device swp0 left promiscuous mode [ 1819.301112] sja1105 spi2.0: Link is Down [ 1819.307981] DSA: tree 1 torn down [ 1819.312408] device eno2 left promiscuous mode [ 1819.656803] mscc_felix 0000:00:00.5: Link is Down [ 1819.667194] DSA: tree 0 torn down [ 1819.711557] fsl_enetc 0000:00:00.2 eno2: Link is Down This approach allows us to keep the DSA framework absolutely unchanged, and the driver core will just know to unbind us first when the master goes away - as opposed to the large (and probably impossible) rework required if attempting to listen for NETDEV_UNREGISTER. As per the documentation at Documentation/driver-api/device_link.rst, specifying the DL_FLAG_AUTOREMOVE_CONSUMER flag causes the device link to be automatically purged when the consumer fails to probe or later unbinds. So we don't need to keep the consumer_link variable in struct dsa_switch. Fixes: 2f1e8ea7 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings") Signed-off-by:
-
Marco Felsch authored
Commit bedd8d78 ("net: phy: smsc: LAN8710/20: add phy refclk in support") added the phy clk support. The commit already checks if clk_get_optional() throw an error but instead of returning the error it ignores it. Fixes: bedd8d78 ("net: phy: smsc: LAN8710/20: add phy refclk in support") Suggested-by:
Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210111085932.28680-1-m.felsch@pengutronix.deSigned-off-by:
-
- 12 Jan, 2021 2 commits
-
-
Petr Machata authored
In commit 826f328e ("net: dcb: Validate netlink message in DCB handler"), Linux started rejecting RTM_GETDCB netlink messages if they contained a set-like DCB_CMD_ command. The reason was that privileges were only verified for RTM_SETDCB messages, but the value that determined the action to be taken is the command, not the message type. And validation of message type against the DCB command was the obvious missing piece. Unfortunately it turns out that mlnx_qos, a somewhat widely deployed tool for configuration of DCB, accesses the DCB set-like APIs through RTM_GETDCB. Therefore do not bounce the discrepancy between message type and command. Instead, in addition to validating privileges based on the actual message type, validate them also based on the expected message type. This closes the loophole of allowing DCB configuration on non-admin accounts, while maintaining backward compatibility. Fixes: 2f90b865 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver") Fixes: 826f328e ("net: dcb: Validate netlink message in DCB handler") Signed-off-by:
Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/a3edcfda0825f2aa2591801c5232f2bbf2d8a554.1610384801.git.me@pmachata.orgSigned-off-by:
-
Jakub Kicinski authored
Willem de Bruijn says: ==================== skb frag: kmap_atomic fixes skb frags may be backed by highmem and/or compound pages. Various code calls kmap_atomic to safely access highmem pages. But this needs additional care for compound pages. Fix a few issues: patch 1 expect kmap mappings with CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP patch 2 fixes kmap_atomic + compound page support in skb_seq_read patch 3 fixes kmap_atomic + compound page support in esp ==================== Link: https://lore.kernel.org/r/20210109221834.3459768-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
