- 21 Mar, 2011 40 commits
-
-
Olivier Grenie authored
This patch adds support for the SoC DiB7090 DVB-T demodulator and its melt-in UHF/VHF RF tuner. Signed-off-by:
Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by:
Patrick Boettcher <patrick.boettcher@dibcom.fr> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Olivier Grenie authored
This patchs add initial support for the DiB9000-device. This demodulator is firmware-driven. Signed-off-by:
-
Olivier Grenie authored
This patch adds several performance improvements and prepares the usage of firmware-based devices. Signed-off-by:
-
Olivier Grenie authored
This patch adds the possibitity to use different I2C-ports to talk to slave-devices than the standard ones. Signed-off-by:
-
Olivier Grenie authored
This patch adds a set a functions which allow the handling of multiple demodulator in a diversity reception chain. Signed-off-by:
-
Olivier Grenie authored
This commit adds a function to the DiB0700 USB driver which allows drivers to change the I2C clock speed. Signed-off-by:
-
Sylwester Nawrocki authored
Add I2C/V4L2 subdev driver for Siliconfile NOON010PC30 CIF camera. The driver implements basic functionality, i.e. CIF/QCIF/QQCIF resolution and color format selection, automatic/manual color balance control. Other functions like cropping, rotation/flip, exposure etc. can be easily implemented if needed. Reviewed-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Add ID for NOON010PC30 camera chip and reserve ID range for Siliconfile sensors. Signed-off-by:
-
Sungchun Kang authored
When is called fimc_stop_capture, it seems that wait_event_timeout used improperly. It should be wake up by irq handler. Reviewed-by Jonghun Han <jonghun.han@samsung.com> Signed-off-by:
Sungchun Kang <sungchun.kang@samsung.com> Signed-off-by:
-
Hyunwoong Kim authored
This patch fixes the value of FIFO_CTRL in MSCTRL. Main-scaler has the value to specify a basis FIFO control of input DMA. The description of FIFO_CTRL has been changed as below. 0 = FIFO Empty (Next burst transaction is possible when FIFO is empty) 1 = FIFO Full (Next burst transaction is possible except Full FIFO) Value '1' is recommended to enhance the FIMC operation performance. Reviewed-by:
Jonghun Han <jonghun.han@samsung.com> Signed-off-by:
Hyunwoong Kim <khw0178.kim@samsung.com> Signed-off-by:
-
Hyunwoong Kim authored
This patch adds callback functions, stop_streaming and job_abort, to abort or finish any DMA in progress. stop_streaming is called by videobuf2 framework and job_abort is called by m2m framework. ST_M2M_PEND state is added to discard the next job. Reviewed-by:
-
Hyunwoong Kim authored
Horizontal and vertical scaling range are according to the following equations. If (SRC_Width >= 64 x DST_Width) { Exit(-1); /* Out of Horizontal scale range} If (SRC_Height >= 64 x DST_Height) { Exit(-1); /* Out of Vertical scale range} fimc_check_scaler_ratio() is used to check if horizontal and vertical scale range are valid or not. To use fimc_check_scaler_ratio, source and destination format should be set by VIDIOC_S_FMT. And in case of scaling up, it doesn't have to check the scale range. Reviewed-by: -
Sylwester Nawrocki authored
Signed-off-by:
-
Hyunwoong Kim authored
The main scaler has four SFRs for main scaler ratio depending on FIMC version. FIMC 4.x has only two SFRs and FIMC 5.x has four SFRs for main scaler. Those are MainHorRatio, MainHorRatio_ext, MainVerRatio and MainverRatio_ext. The FIMC 5.x has 15 bit resolution for scaling ratio as below. {MainHorRatio,MainHorRatio_ext} = {[14:6],[5:0]}. {MainVerRatio,MainVerRatio_ext} = {[14:6],[5:0]}. MainHorRatio = CISCCTRL[24:16], MainHorRatio_ext = CIEXTEN[15:10] MainVerRatio = CISCCTRL[8:0], MainVerRatio_ext = CIEXTEN[5:0] This patch supports FIMC 4.x and FIMC 5.x using platform_device_id::driver_data. Reviewed-by: -
Hyunwoong Kim authored
Some color formats are mismatched in s5p-fimc driver. CIOCTRL[1:0], order422_out, should be set 2b'00 not 2b'11 to use V4L2_PIX_FMT_YUYV. Because in V4L2 standard V4L2_PIX_FMT_YUYV means "start + 0: Y'00 Cb00 Y'01 Cr00 Y'02 Cb01 Y'03 Cr01". According to datasheet 2b'00 is right value for V4L2_PIX_FMT_YUYV. Signed-off-by: -
Sylwester Nawrocki authored
Manage the camera sensor clock in the host driver rather than leaving this task for sensor drivers. The clock frequency must be passed in the sensor's and host driver's platform data. Signed-off-by:
-
Sylwester Nawrocki authored
Map all (0, 90, 180, 270) deg counterclockwise rotation and horizontal and vertical flip controls to (0, 90) deg rotation, horizontal and vertical flip transformations available in the device. Signed-off-by:
-
Sylwester Nawrocki authored
Increase the input DMA "successive burst count" to default value 4 to improve DMA performance. Minor cleanup. Signed-off-by:
-
Sylwester Nawrocki authored
Prevent VIDIOC_STREAMON failing when s_stream callback is not implemented by a sensor subdev driver. Signed-off-by:
-
Sylwester Nawrocki authored
Remove bus_width from s5p_fimc_isp_info data structure. Determine camera data bus width based on mediabus pixel format. Signed-off-by:
-
Sylwester Nawrocki authored
Change s3c_fimc.h header file name to s5p_fimc.h, replace s3c_fimc_* names with s5p_fimc_*. s3c_fimc need to be reserved for S3C series and s5p-fimc driver will not cover CAMIF devices in S3C SoC series. Signed-off-by:
-
Sylwester Nawrocki authored
Signed-off-by:
-
Sylwester Nawrocki authored
Conversion to multiplanar color formats and minor cleanup. Signed-off-by:
-
Sylwester Nawrocki authored
Porting to videobuf 2 and minor cleanup. Separate videobuf_queue_ops are are created for m2m and capture video nodes. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Signed-off-by:
-
Sylwester Nawrocki authored
Add definitions for format with color planes non-contiguous in physical memory. These formats apply only if the V4L2 multiplane extension is used. V4L2_PIX_FMT_NV12M - 2-plane Y/CbCr V4L2_PIX_FMT_NV12MT - 2-plane Y/CbCr tiled (64x32 pixel macroblocks) V4L2_PIX_FMT_YUV420M - 3-plane Y/Cb/Cr Signed-off-by:
-
Marek Szyprowski authored
This patch ports mem2mem test device to videobuf2 framework. Signed-off-by:
-
Marek Szyprowski authored
Port memory-to-memory framework to videobuf2 framework. Add support for multi-planar Video for Linux 2 API extensions to the memory-to-memory driver framework. Based on the original patch written by Pawel Osciak. Signed-off-by:
-
Pawel Osciak authored
Add DocBook documentation for the new multi-planar API extensions to the Video for Linux 2 API DocBook. Signed-off-by:
Pawel Osciak <pawel@osciak.com> Signed-off-by:
-
Pawel Osciak authored
Correct ioctl return value handling and fix coding style issues. [mchehab@redhat.com: return -1 is OK, according with ioctl manpages. Reverting ioctl changes] Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/video/videobuf2-core.c: In function ‘__vb2_perform_fileio’: drivers/media/video/videobuf2-core.c:1638: warning: format ‘%ld’ expects type ‘long int’, but argument 4 has type ‘size_t’ drivers/media/video/videobuf2-core.c:1697: warning: format ‘%ld’ expects type ‘long int’, but argument 2 has type ‘size_t’ drivers/media/video/videobuf2-core.c:1703: warning: format ‘%ld’ expects type ‘long int’, but argument 2 has type ‘size_t’ Signed-off-by: -
Marek Szyprowski authored
Add a generic file io (read and write) emulator for videobuf2. It uses MMAP memory type buffers and generic vb2 calls: req_bufs, qbuf and dqbuf. Video date is being copied from mmap buffers to userspace with standard copy_to_user() function. To add support for file io the driver needs to provide an additional callback - read_setup or write_setup. It should provide the default number of buffers used by emulator and flags. With these flags one can detemine the style of read() or write() emulation. By default 'streaming' style is used. With VB2_FILEIO_READ_ONCE flag one can select 'one shot' mode for read() emulator. With VB2_FILEIO_WRITE_IMMEDIATE flag one can select immediate conversion of write calls to qbuf for write() emulator, so the vb2 will not wait until each buffer is filled completely before queueing it to the driver. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Add an implementation of DMA scatter/gather allocator and handling routines for videobuf2. For mmap operation mode it is implemented on top of alloc_page + sg_set_page/_free_page. For userptr operation mode it is implemented on top of get_user_pages + sg_set_page/put_page. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
-
Pawel Osciak authored
Add an implementation of DMA coherent memory allocator and handling routines for videobuf2, implemented on top of dma_alloc_coherent() call. Signed-off-by:
Pawel Osciak <p.osciak@samsung.com> Signed-off-by:
-
Pawel Osciak authored
Add an implementation of contiguous virtual memory allocator and handling routines for videobuf2, implemented on top of vmalloc()/vfree() calls. Signed-off-by:
-
Marek Szyprowski authored
Add generic memory handling routines for userspace pointer handling, contiguous memory verification and mapping. Signed-off-by:
-
Pawel Osciak authored
Videobuf2 is a Video for Linux 2 API-compatible driver framework for multimedia devices. It acts as an intermediate layer between userspace applications and device drivers. It also provides low-level, modular memory management functions for drivers. Videobuf2 eases driver development, reduces drivers' code size and aids in proper and consistent implementation of V4L2 API in drivers. Videobuf2 memory management backend is fully modular. This allows custom memory management routines for devices and platforms with non-standard memory management requirements to be plugged in, without changing the high-level buffer management functions and API. The framework provides: - implementations of streaming I/O V4L2 ioctls and file operations - high-level video buffer, video queue and state management functions - video buffer memory allocation and management Signed-off-by:
-
Pawel Osciak authored
Add multi-planar ioctl handling to the 32bit compatibility layer. [mchehab@redhat.com: Merged with a fixup patch from Pawel] Signed-off-by:
-
Pawel Osciak authored
Add multi-planar API core ioctl handling and conversion functions. [mchehab@redhat.com: CondingStyle fixup] Signed-off-by:
-
Pawel Osciak authored
Multi-planar API is as a backwards-compatible extension of the V4L2 API, which allows video buffers to consist of one or more planes. Planes are separate memory buffers; each has its own mapping, backed by usually separate physical memory buffers. Many different uses for the multi-planar API are possible, examples include: - embedded devices requiring video components to be placed in physically separate buffers, e.g. for Samsung S3C/S5P SoC series' video codec, Y and interleaved Cb/Cr components reside in buffers in different memory banks; - applications may receive (or choose to store) video data of one video buffer in separate memory buffers; such data would have to be temporarily copied together into one buffer before passing it to a V4L2 device; - applications or drivers may want to pass metadata related to a buffer and it may not be possible to place it in the same buffer, together with video data. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by:
-
