- 28 Mar, 2017 19 commits
-
-
Johan Hovold authored
commit 0b1d250a upstream. Fix a NULL-pointer dereference in the interrupt callback should a malicious device send data containing a bad port number by adding the missing sanity check. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Johan Hovold authored
commit de46e566 upstream. Make sure to verify that we have the required interrupt-out endpoint for IOWarrior56 devices to avoid dereferencing a NULL-pointer in write should a malicious device lack such an endpoint. Fixes: 946b960d ("USB: add driver for iowarrior devices.") Signed-off-by:
-
Johan Hovold authored
commit b7321e81 upstream. Make sure to check for the required interrupt-in endpoint to avoid dereferencing a NULL-pointer should a malicious device lack such an endpoint. Note that a fairly recent change purported to fix this issue, but added an insufficient test on the number of endpoints only, a test which can now be removed. Fixes: 4ec0ef3a ("USB: iowarrior: fix oops with malicious USB descriptors") Fixes: 946b960d ("USB: add driver for iowarrior devices.") Signed-off-by:
-
Johan Hovold authored
commit 30572418 upstream. This driver needlessly took another reference to the tty on open, a reference which was then never released on close. This lead to not just a leak of the tty, but also a driver reference leak that prevented the driver from being unloaded after a port had once been opened. Fixes: 4a90f09b ("tty: usb-serial krefs") Signed-off-by:
-
Johan Hovold authored
commit 8c76d7cd upstream. Add missing sanity check to the bulk-in completion handler to avoid an integer underflow that could be triggered by a malicious device. This avoids leaking up to 56 bytes from after the URB transfer buffer to user space. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Guenter Roeck authored
commit dcc7620c upstream. Upstream commit 98d74f9c ("xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers") fixes a problem with hot pluggable PCI xhci controllers which can result in excessive timeouts, to the point where the system reports a deadlock. The same problem is seen with hot pluggable xhci controllers using the xhci-plat driver, such as the driver used for Type-C ports on rk3399. Similar to hot-pluggable PCI controllers, the driver for this chip removes the xhci controller from the system when the Type-C cable is disconnected. The solution for PCI devices works just as well for non-PCI devices and avoids the problem. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Felipe Balbi authored
commit 7369090a upstream. Some gadget drivers are bad, bad boys. We notice that ADB was passing bad Burst Size which caused top bits of param0 to be overwritten which confused DWC3 when running this command. In order to avoid future issues, we're going to make sure values passed by macros are always safe for the controller. Note that ADB still needs a fix to *not* pass bad values. Reported-by:
Mohamed Abbas <mohamed.abbas@intel.com> Sugested-by:
Adam Andruszak <adam.andruszak@intel.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Rik van Riel authored
commit bf7165cf upstream. There are several trace include files that define TRACE_INCLUDE_FILE. Include several of them in the same .c file (as I currently have in some code I am working on), and the compile will blow up with a "warning: "TRACE_INCLUDE_FILE" redefined #define TRACE_INCLUDE_FILE syscalls" Every other include file in include/trace/events/ avoids that issue by having a #undef TRACE_INCLUDE_FILE before the #define; syscalls.h should have one, too. Link: http://lkml.kernel.org/r/20160928225554.13bd7ac6@annuminas.surriel.com Fixes: b8007ef7 ("tracing: Separate raw syscall from syscall tracer") Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Ralf Baechle authored
commit 3021773c upstream. When expanding the la or dla pseudo-instruction in a delay slot the GNU assembler will complain should the pseudo-instruction expand to multiple actual instructions, since only the first of them will be in the delay slot leading to the pseudo-instruction being only partially executed if the branch is taken. Use of PTR_LA in the dec int-handler.S leads to such warnings: arch/mips/dec/int-handler.S: Assembler messages: arch/mips/dec/int-handler.S:149: Warning: macro instruction expanded into multiple instructions in a branch delay slot arch/mips/dec/int-handler.S:198: Warning: macro instruction expanded into multiple instructions in a branch delay slot Avoid this by open coding the PTR_LA macros. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Arnd Bergmann authored
commit d43e6fb4 upstream. The #warning was present 10 years ago when the driver first got merged. As the platform is rather obsolete by now, it seems very unlikely that the warning will cause anyone to fix the code properly. kernelci.org reports the warning for every build in the meantime, so I think it's better to just turn it into a code comment to reduce noise. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
John Crispin authored
commit 9c48568b upstream. Over the years the code has been changed various times leading to argc/argv being defined in a different function to where we actually use the variables. Clean this up by moving them to prom_init_cmdline(). Signed-off-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14902/Signed-off-by:
-
Arnd Bergmann authored
commit 906b2684 upstream. kernelci.org reports a warning for this driver, as it copies a local variable into a 'const char *' string: drivers/mtd/maps/pmcmsp-flash.c:149:30: warning: passing argument 1 of 'strncpy' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] Using kstrndup() simplifies the code and avoids the warning. Signed-off-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit 23ca9b52 upstream. kernelci reports a failure of the ip28_defconfig build after upgrading its gcc version: arch/mips/sgi-ip22/Platform:29: *** gcc doesn't support needed option -mr10k-cache-barrier=store. Stop. The problem apparently is that the -mr10k-cache-barrier=store option is now rejected for CPUs other than r10k. Explicitly including the CPU in the check fixes this and is safe because both options were introduced in gcc-4.4. Signed-off-by:
-
Arnd Bergmann authored
commit b6176494 upstream. One of the last remaining failures in kernelci.org is for a gcc bug: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: error: insn does not satisfy its constraints: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: internal compiler error: in extract_constrain_insn, at recog.c:2190 This is apparently broken in gcc-6 but fixed in gcc-7, and I cannot reproduce the problem here. However, it is clear that ip27_defconfig does not actually need this driver as the platform has only PCI-X but not PCIe, and the qlge adapter in turn is PCIe-only. The driver was originally enabled in 2010 along with lots of other drivers. Fixes: 59d302b3 ("MIPS: IP27: Make defconfig useful again.") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Arnd Bergmann authored
commit 7d6e9105 upstream. An ancient gcc bug (first reported in 2003) has apparently resurfaced on MIPS, where kernelci.org reports an overly large stack frame in the whirlpool hash algorithm: crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] With some testing in different configurations, I'm seeing large variations in stack frames size up to 1500 bytes for what should have around 300 bytes at most. I also checked the reference implementation, which is essentially the same code but also comes with some test and benchmarking infrastructure. It seems that recent compiler versions on at least arm, arm64 and powerpc have a partial fix for this problem, but enabling "-fsched-pressure", but even with that fix they suffer from the issue to a certain degree. Some testing on arm64 shows that the time needed to hash a given amount of data is roughly proportional to the stack frame size here, which makes sense given that the wp512 implementation is doing lots of loads for table lookups, and the problem with the overly large stack is a result of doing a lot more loads and stores for spilled registers (as seen from inspecting the object code). Disabling -fschedule-insns consistently fixes the problem for wp512, in my collection of cross-compilers, the results are consistently better or identical when comparing the stack sizes in this function, though some architectures (notable x86) have schedule-insns disabled by default. The four columns are: default: -O2 press: -O2 -fsched-pressure nopress: -O2 -fschedule-insns -fno-sched-pressure nosched: -O2 -no-schedule-insns (disables sched-pressure) default press nopress nosched alpha-linux-gcc-4.9.3 1136 848 1136 176 am33_2.0-linux-gcc-4.9.3 2100 2076 2100 2104 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 cris-linux-gcc-4.9.3 272 272 272 272 frv-linux-gcc-4.9.3 1128 1000 1128 280 hppa64-linux-gcc-4.9.3 1128 336 1128 184 hppa-linux-gcc-4.9.3 644 308 644 276 i386-linux-gcc-4.9.3 352 352 352 352 m32r-linux-gcc-4.9.3 720 656 720 268 microblaze-linux-gcc-4.9.3 1108 604 1108 256 mips64-linux-gcc-4.9.3 1328 592 1328 208 mips-linux-gcc-4.9.3 1096 624 1096 240 powerpc64-linux-gcc-4.9.3 1088 432 1088 160 powerpc-linux-gcc-4.9.3 1080 584 1080 224 s390-linux-gcc-4.9.3 456 456 624 360 sh3-linux-gcc-4.9.3 292 292 292 292 sparc64-linux-gcc-4.9.3 992 240 992 208 sparc-linux-gcc-4.9.3 680 592 680 312 x86_64-linux-gcc-4.9.3 224 240 272 224 xtensa-linux-gcc-4.9.3 1152 704 1152 304 aarch64-linux-gcc-7.0.0 224 224 1104 208 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 mips-linux-gcc-7.0.0 1120 648 1120 272 x86_64-linux-gcc-7.0.1 240 240 304 240 arm-linux-gnueabi-gcc-4.4.7 840 392 arm-linux-gnueabi-gcc-4.5.4 784 728 784 320 arm-linux-gnueabi-gcc-4.6.4 736 728 736 304 arm-linux-gnueabi-gcc-4.7.4 944 784 944 352 arm-linux-gnueabi-gcc-4.8.5 464 464 760 352 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 arm-linux-gnueabi-gcc-5.3.1 824 824 1064 336 arm-linux-gnueabi-gcc-6.1.1 808 808 1056 344 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 Trying the same test for serpent-generic, the picture is a bit different, and while -fno-schedule-insns is generally better here than the default, -fsched-pressure wins overall, so I picked that instead. default press nopress nosched alpha-linux-gcc-4.9.3 1392 864 1392 960 am33_2.0-linux-gcc-4.9.3 536 524 536 528 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 cris-linux-gcc-4.9.3 528 528 528 528 frv-linux-gcc-4.9.3 536 400 536 504 hppa64-linux-gcc-4.9.3 524 208 524 480 hppa-linux-gcc-4.9.3 768 472 768 508 i386-linux-gcc-4.9.3 564 564 564 564 m32r-linux-gcc-4.9.3 712 576 712 532 microblaze-linux-gcc-4.9.3 724 392 724 512 mips64-linux-gcc-4.9.3 720 384 720 496 mips-linux-gcc-4.9.3 728 384 728 496 powerpc64-linux-gcc-4.9.3 704 304 704 480 powerpc-linux-gcc-4.9.3 704 296 704 480 s390-linux-gcc-4.9.3 560 560 592 536 sh3-linux-gcc-4.9.3 540 540 540 540 sparc64-linux-gcc-4.9.3 544 352 544 496 sparc-linux-gcc-4.9.3 544 344 544 496 x86_64-linux-gcc-4.9.3 528 536 576 528 xtensa-linux-gcc-4.9.3 752 544 752 544 aarch64-linux-gcc-7.0.0 432 432 656 480 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 mips-linux-gcc-7.0.0 720 464 720 488 x86_64-linux-gcc-7.0.1 536 528 600 536 arm-linux-gnueabi-gcc-4.4.7 592 440 arm-linux-gnueabi-gcc-4.5.4 776 448 776 544 arm-linux-gnueabi-gcc-4.6.4 776 448 776 544 arm-linux-gnueabi-gcc-4.7.4 768 448 768 544 arm-linux-gnueabi-gcc-4.8.5 488 488 776 544 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 arm-linux-gnueabi-gcc-5.3.1 552 552 776 536 arm-linux-gnueabi-gcc-6.1.1 560 560 776 536 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 I did not do any runtime tests with serpent, so it is possible that stack frame size does not directly correlate with runtime performance here and it actually makes things worse, but it's more likely to help here, and the reduced stack frame size is probably enough reason to apply the patch, especially given that the crypto code is often used in deep call chains. Link: https://kernelci.org/build/id/58797d7559b5149efdf6c3a9/logs/ Link: http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11488 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149 Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Johan Hovold authored
commit 2e46565c upstream. A recent change claimed to fix an off-by-one error in the OOB-port completion handler, but instead introduced such an error. This could specifically led to modem-status changes going unnoticed, effectively breaking TIOCMGET. Note that the offending commit fixes a loop-condition underflow and is marked for stable, but should not be backported without this fix. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: 2d380889 ("USB: serial: digi_acceleport: fix OOB data sanity check") Signed-off-by:
-
Johan Hovold authored
commit 2d380889 upstream. Make sure to check for short transfers to avoid underflow in a loop condition when parsing the receive buffer. Also fix an off-by-one error in the incomplete sanity check which could lead to invalid data being parsed. Fixes: 8c209e67 ("USB: make actual_length in struct urb field u32") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mathias Nyman authored
commit 98d74f9c upstream. PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will remove the xhci controller from the PCI bus when the last USB device is disconnected. Add a flag to indicate that the host is being removed to avoid queueing configure_endpoint commands for the dropped endpoints. For PCI hotplugged controllers this will prevent 5 second command timeouts For static xhci controllers the configure_endpoint command is not needed in the removal case as everything will be returned, freed, and the controller is reset. For now the flag is only set for PCI connected host controllers. Signed-off-by:
-
Keno Fischer authored
commit 8310d48b upstream. In commit 19be0eaf ("mm: remove gup_flags FOLL_WRITE games from __get_user_pages()"), the mm code was changed from unsetting FOLL_WRITE after a COW was resolved to setting the (newly introduced) FOLL_COW instead. Simultaneously, the check in gup.c was updated to still allow writes with FOLL_FORCE set if FOLL_COW had also been set. However, a similar check in huge_memory.c was forgotten. As a result, remote memory writes to ro regions of memory backed by transparent huge pages cause an infinite loop in the kernel (handle_mm_fault sets FOLL_COW and returns 0 causing a retry, but follow_trans_huge_pmd bails out immidiately because `(flags & FOLL_WRITE) && !pmd_write(*pmd)` is true. While in this state the process is stil SIGKILLable, but little else works (e.g. no ptrace attach, no other signals). This is easily reproduced with the following code (assuming thp are set to always): #include <assert.h> #include <fcntl.h> #include <stdint.h> #include <stdio.h> #include <string.h> #include <sys/mman.h> #include <sys/stat.h> #include <sys/types.h> #include <sys/wait.h> #include <unistd.h> #define TEST_SIZE 5 * 1024 * 1024 int main(void) { int status; pid_t child; int fd = open("/proc/self/mem", O_RDWR); void *addr = mmap(NULL, TEST_SIZE, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, 0, 0); assert(addr != MAP_FAILED); pid_t parent_pid = getpid(); if ((child = fork()) == 0) { void *addr2 = mmap(NULL, TEST_SIZE, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, 0, 0); assert(addr2 != MAP_FAILED); memset(addr2, 'a', TEST_SIZE); pwrite(fd, addr2, TEST_SIZE, (uintptr_t)addr); return 0; } assert(child == waitpid(child, &status, 0)); assert(WIFEXITED(status) && WEXITSTATUS(status) == 0); return 0; } Fix this by updating follow_trans_huge_pmd in huge_memory.c analogously to the update in gup.c in the original commit. The same pattern exists in follow_devmap_pmd. However, we should not be able to reach that check with FOLL_COW set, so add WARN_ONCE to make sure we notice if we ever do. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170106015025.GA38411@juliacomputing.comSigned-off-by:
Keno Fischer <keno@juliacomputing.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: - Drop change to follow_devmap_pmd() - pmd_dirty() is not available; check the page flags as in can_follow_write_pte() - Adjust context] Signed-off-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
- 16 Mar, 2017 2 commits
-
-
Brian Foster authored
commit dbd5c8c9 upstream. The total field from struct xfs_alloc_arg is a bit of an unknown commodity. It is documented as the total block requirement for the transaction and is used in this manner from most call sites by virtue of passing the total block reservation of the transaction associated with an allocation. Several xfs_bmapi_write() callers pass hardcoded values of 0 or 1 for the total block requirement, which is a historical oddity without any clear reasoning. The xfs_iomap_write_direct() caller, for example, passes 0 for the total block requirement. This has been determined to cause problems in the form of ABBA deadlocks of AGF buffers due to incorrect AG selection in the block allocator. Specifically, the xfs_alloc_space_available() function incorrectly selects an AG that doesn't actually have sufficient space for the allocation. This occurs because the args.total field is 0 and thus the remaining free space check on the AG doesn't actually consider the size of the allocation request. This locks the AGF buffer, the allocation attempt proceeds and ultimately fails (in xfs_alloc_fix_minleft()), and xfs_alloc_vexent() moves on to the next AG. In turn, this can lead to incorrect AG locking order (if the allocator wraps around, attempting to lock AG 0 after acquiring AG N) and thus deadlock if racing with another operation. This problem has been reproduced via generic/299 on smallish (1GB) ramdisk test devices. To avoid this problem, replace the undocumented hardcoded total parameters from the iomap and utility callers to pass the block reservation used for the associated transaction. This is consistent with other xfs_bmapi_write() callers throughout XFS. The assumption is that the total field allows the selection of an AG that can handle the entire operation rather than simply the allocation/range being requested (e.g., resulting btree splits, etc.). This addresses the aforementioned generic/299 hang by ensuring AG selection only occurs when the allocation can be satisfied by the AG. [nb] backport to 3.12 Reported-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Acked-by:
-
Mikulas Patocka authored
commit d67a5f4b upstream. Commit df2cb6da ("block: Avoid deadlocks with bio allocation by stacking drivers") created a workqueue for every bio set and code in bio_alloc_bioset() that tries to resolve some low-memory deadlocks by redirecting bios queued on current->bio_list to the workqueue if the system is low on memory. However other deadlocks (see below **) may happen, without any low memory condition, because generic_make_request is queuing bios to current->bio_list (rather than submitting them). ** the related dm-snapshot deadlock is detailed here: https://www.redhat.com/archives/dm-devel/2016-July/msg00065.html Fix this deadlock by redirecting any bios on current->bio_list to the bio_set's rescue workqueue on every schedule() call. Consequently, when the process blocks on a mutex, the bios queued on current->bio_list are dispatched to independent workqueus and they can complete without waiting for the mutex to be available. The structure blk_plug contains an entry cb_list and this list can contain arbitrary callback functions that are called when the process blocks. To implement this fix DM (ab)uses the onstack plug's cb_list interface to get its flush_current_bio_list() called at schedule() time. This fixes the snapshot deadlock - if the map method blocks, flush_current_bio_list() will be called and it redirects bios waiting on current->bio_list to appropriate workqueues. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1267650 Depends-on: df2cb6da ("block: Avoid deadlocks with bio allocation by stacking drivers") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
- 14 Mar, 2017 1 commit
-
-
Jiri Slaby authored
-
- 13 Mar, 2017 18 commits
-
-
K. Y. Srinivasan authored
commit 372b1e91 upstream. The hypercall page only needs to be executable but currently it is setup to be writable as well. Fix the issue. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Acked-by:
Kees Cook <keescook@chromium.org> Reported-by:
Stephen Hemminger <stephen@networkplumber.org> Tested-by:
-
OGAWA Hirofumi authored
commit c0d0e351 upstream. Recently fallocate patch was merged and it uses MSDOS_I(inode)->mmu_private at fat_evict_inode(). However, fat_inode/fsinfo_inode that was introduced in past didn't initialize MSDOS_I(inode) properly. With those combinations, it became the cause of accessing random entry in FAT area. Link: http://lkml.kernel.org/r/87pohrj4i8.fsf@mail.parknet.co.jpSigned-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by:
Moreno Bartalucci <moreno.bartalucci@tecnorama.it> Tested-by:
-
Michel Dänzer authored
commit 239ac65f upstream. The current caching state may not be tt_cached, even though the placement contains TTM_PL_FLAG_CACHED, because placement can contain multiple caching flags. Trying to swap out such a BO would trip up the BUG_ON(ttm->caching_state != tt_cached); in ttm_tt_swapout. Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com>. Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Y.C. Chen authored
commit 905f21a4 upstream. The test to see if VGA was already enabled is doing an unnecessary second test from a register that may or may not have been initialized to a valid value. Remove it. Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Joel Stanley <joel@jms.id.au> Tested-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Matt Chen authored
commit a9e9200d upstream. The issue was found when entering suspend and resume. It triggers a warning in: mac80211/key.c: ieee80211_enable_keys() ... WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt || sdata->crypto_tx_tailroom_pending_dec); ... It points out sdata->crypto_tx_tailroom_pending_dec isn't cleaned up successfully in a delayed_work during suspend. Add a flush_delayed_work to fix it. Signed-off-by:
Matt Chen <matt.chen@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Max Filippov authored
commit 4ab18701 upstream. FDT tag parsing is not related to whether BLK_DEV_INITRD is configured or not, move it out of the corresponding #ifdef/#endif block. This fixes passing external FDT to the kernel configured w/o BLK_DEV_INITRD support. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Trond Myklebust authored
commit 251af29c upstream. It is not sufficient to just check that the lock pids match when granting a callback, we also need to ensure that we're granting the callback on the right file. Reported-by:
Pankaj Singh <psingh.ait@gmail.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 32677207 upstream. The child_exit errno needs to be shifted by 8 bits to compare against the return values for the bisect variables. Fixes: c5dacb88 ("ktest: Allow overriding bisect test results") Signed-off-by:
-
Feras Daoud authored
commit 0a0007f2 upstream. When calling set_mode from sys/fs, the call flow locks the sys/fs lock first and then tries to lock rtnl_lock (when calling ipoib_set_mod). On the other hand, the rmmod call flow takes the rtnl_lock first (when calling unregister_netdev) and then tries to take the sys/fs lock. Deadlock a->b, b->a. The problem starts when ipoib_set_mod frees it's rtnl_lck and tries to get it after that. set_mod: [<ffffffff8104f2bd>] ? check_preempt_curr+0x6d/0x90 [<ffffffff814fee8e>] __mutex_lock_slowpath+0x13e/0x180 [<ffffffff81448655>] ? __rtnl_unlock+0x15/0x20 [<ffffffff814fed2b>] mutex_lock+0x2b/0x50 [<ffffffff81448675>] rtnl_lock+0x15/0x20 [<ffffffffa02ad807>] ipoib_set_mode+0x97/0x160 [ib_ipoib] [<ffffffffa02b5f5b>] set_mode+0x3b/0x80 [ib_ipoib] [<ffffffff8134b840>] dev_attr_store+0x20/0x30 [<ffffffff811f0fe5>] sysfs_write_file+0xe5/0x170 [<ffffffff8117b068>] vfs_write+0xb8/0x1a0 [<ffffffff8117ba81>] sys_write+0x51/0x90 [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b rmmod: [<ffffffff81279ffc>] ? put_dec+0x10c/0x110 [<ffffffff8127a2ee>] ? number+0x2ee/0x320 [<ffffffff814fe6a5>] schedule_timeout+0x215/0x2e0 [<ffffffff8127cc04>] ? vsnprintf+0x484/0x5f0 [<ffffffff8127b550>] ? string+0x40/0x100 [<ffffffff814fe323>] wait_for_common+0x123/0x180 [<ffffffff81060250>] ? default_wake_function+0x0/0x20 [<ffffffff8119661e>] ? ifind_fast+0x5e/0xb0 [<ffffffff814fe43d>] wait_for_completion+0x1d/0x20 [<ffffffff811f2e68>] sysfs_addrm_finish+0x228/0x270 [<ffffffff811f2fb3>] sysfs_remove_dir+0xa3/0xf0 [<ffffffff81273f66>] kobject_del+0x16/0x40 [<ffffffff8134cd14>] device_del+0x184/0x1e0 [<ffffffff8144e59b>] netdev_unregister_kobject+0xab/0xc0 [<ffffffff8143c05e>] rollback_registered+0xae/0x130 [<ffffffff8143c102>] unregister_netdevice+0x22/0x70 [<ffffffff8143c16e>] unregister_netdev+0x1e/0x30 [<ffffffffa02a91b0>] ipoib_remove_one+0xe0/0x120 [ib_ipoib] [<ffffffffa01ed95f>] ib_unregister_device+0x4f/0x100 [ib_core] [<ffffffffa021f5e1>] mlx4_ib_remove+0x41/0x180 [mlx4_ib] [<ffffffffa01ab771>] mlx4_remove_device+0x71/0x90 [mlx4_core] Fixes: 862096a8 ("IB/ipoib: Add more rtnl_link_ops callbacks") Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Martin Schwidefsky authored
commit fb94a687 upstream. Return a sensible value if TASK_SIZE if called from a kernel thread. This gets us around an issue with copy_mount_options that does a magic size calculation "TASK_SIZE - (unsigned long)data" while in a kernel thread and data pointing to kernel space. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
commit 1e4a382f upstream. For devices with multiple input queues, tiqdio_call_inq_handlers() iterates over all input queues and clears the device's DSCI during each iteration. If the DSCI is re-armed during one of the later iterations, we therefore do not scan the previous queues again. The re-arming also raises a new adapter interrupt. But its handler does not trigger a rescan for the device, as the DSCI has already been erroneously cleared. This can result in queue stalls on devices with multiple input queues. Fix it by clearing the DSCI just once, prior to scanning the queues. As the code is moved in front of the loop, we also need to access the DSCI directly (ie irq->dsci) instead of going via each queue's parent pointer to the same irq. This is not a functional change, and a follow-up patch will clean up the other users. In practice, this bug only affects CQ-enabled HiperSockets devices, ie. devices with sysfs-attribute "hsuid" set. Setting a hsuid is needed for AF_IUCV socket applications that use HiperSockets communication. Fixes: 104ea556 ("qdio: support asynchronous delivery of storage blocks") Reviewed-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by:
-
Dmitry Tunin authored
commit 441ad62d upstream. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3018 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Chao Peng authored
commit 96794e4e upstream. Guest segment selector is 16 bit field and guest segment base is natural width field. Fix two incorrect invocations accordingly. Without this patch, build fails when aggressive inlining is used with ICC. [js] no vmx_dump_sel in 3.12 Signed-off-by:
Chao Peng <chao.p.peng@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Ian Abbott authored
commit 1c9c858e upstream. The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports, respectively. The first 4 ports are implemented by an OX16PCI954 chip, and the second 4 ports are implemented by an OX16C954 chip on a local bus, bridged by the second PCI function of the OX16PCI954. The ports are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a non-standard oscillator frequency of 20 MHz (base_baud = 1250000). Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Alexander Popov authored
commit 82f2341c upstream. Currently N_HDLC line discipline uses a self-made singly linked list for data buffers and has n_hdlc.tbuf pointer for buffer retransmitting after an error. The commit be10eb75 ("tty: n_hdlc add buffer flushing") introduced racy access to n_hdlc.tbuf. After tx error concurrent flush_tx_queue() and n_hdlc_send_frames() can put one data buffer to tx_free_buf_list twice. That causes double free in n_hdlc_release(). Let's use standard kernel linked list and get rid of n_hdlc.tbuf: in case of tx error put current data buffer after the head of tx_buf_list. Signed-off-by:
Alexander Popov <alex.popov@linux.com> Signed-off-by:
-
Jiri Slaby authored
commit e9b736d8 upstream. The class of 4 n_hdls buf locks is the same because a single function n_hdlc_buf_list_init is used to init all the locks. But since flush_tx_queue takes n_hdlc->tx_buf_list.spinlock and then calls n_hdlc_buf_put which takes n_hdlc->tx_free_buf_list.spinlock, lockdep emits a warning: ============================================= [ INFO: possible recursive locking detected ] 4.3.0-25.g91e30a7-default #1 Not tainted --------------------------------------------- a.out/1248 is trying to acquire lock: (&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fd020>] n_hdlc_buf_put+0x20/0x60 [n_hdlc] but task is already holding lock: (&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fdc07>] n_hdlc_tty_ioctl+0x127/0x1d0 [n_hdlc] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&list->spinlock)->rlock); lock(&(&list->spinlock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by a.out/1248: #0: (&tty->ldisc_sem){++++++}, at: [<ffffffff814c9eb0>] tty_ldisc_ref_wait+0x20/0x50 #1: (&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fdc07>] n_hdlc_tty_ioctl+0x127/0x1d0 [n_hdlc] ... Call Trace: ... [<ffffffff81738fd0>] _raw_spin_lock_irqsave+0x50/0x70 [<ffffffffa01fd020>] n_hdlc_buf_put+0x20/0x60 [n_hdlc] [<ffffffffa01fdc24>] n_hdlc_tty_ioctl+0x144/0x1d0 [n_hdlc] [<ffffffff814c25c1>] tty_ioctl+0x3f1/0xe40 ... Fix it by initializing the spin_locks separately. This removes also reduntand memset of a freshly kzallocated space. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
James Smart authored
commit 8ea73db4 upstream. Correct WQ creation for pagesize The driver was calculating the adapter command pagesize indicator from the system pagesize. However, the buffers the driver allocates are only one size (SLI4_PAGE_SIZE), so no calculation was necessary. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
-
Ralf Baechle authored
commit ae2f5e5e upstream. Fix the following build error with binutils 2.25. CC arch/mips/mm/sc-ip22.o {standard input}: Assembler messages: {standard input}:132: Error: number (0x9000000080000000) larger than 32 bits {standard input}:159: Error: number (0x9000000080000000) larger than 32 bits {standard input}:200: Error: number (0x9000000080000000) larger than 32 bits scripts/Makefile.build:293: recipe for target 'arch/mips/mm/sc-ip22.o' failed make[1]: *** [arch/mips/mm/sc-ip22.o] Error 1 MIPS has used .set mips3 to temporarily switch the assembler to 64 bit mode in 64 bit kernels virtually forever. Binutils 2.25 broke this behavious partially by happily accepting 64 bit instructions in .set mips3 mode but puking on 64 bit constants when generating 32 bit ELF. Binutils 2.26 restored the old behaviour again. Fix build with binutils 2.25 by open coding the offending dli $1, 0x9000000080000000 as li $1, 0x9000 dsll $1, $1, 48 which is ugly be the only thing that will build on all binutils vintages. Signed-off-by:
-
