- 10 Dec, 2014 6 commits
-
-
Johan Hovold authored
commit 75bcbf29 upstream. Fix reporting of overrun errors, which should only be reported once using the inserted null character. Fixes: 6b8f1ca5 ("USB: ssu100: set tty_flags in ssu100_process_packet") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Johan Hovold authored
commit 855515a6 upstream. Fix reporting of overrun errors, which are not associated with a character. Instead insert a null character and report only once. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johan Hovold authored
commit 5d1678a3 upstream. Fix handling of TTY error flags, which are not bitmasks and must specifically not be ORed together as this prevents the line discipline from recognising them. Also insert null characters when reporting overrun errors as these are not associated with the received character. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Troy Clark authored
commit 204ec6e0 upstream. Add PIDs for new Matrix Orbital GTT series products. Signed-off-by:
Troy Clark <tclark@matrixorbital.ca> [johan: shorten commit message ] Signed-off-by:
-
Qipan Li authored
commit 9c4b19a0 upstream. commit 8c328a26 ("spi: sirf: Avoid duplicate code in various bits_per_word cases") is wrong in setting data width register of fifo is not right, it should use sspi->word_width >> 1 to set related bits. According to hardware spec, the mapping between register value and data width: 0 - byte 1 - WORD 2 - DWORD Fixes: 8c328a26 ("spi: sirf: Avoid duplicate code in various bits_per_word cases") is wrong in setting data width register of Signed-off-by:
Qipan Li <Qipan.Li@csr.com> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
James Hogan authored
commit e6d5e7d9 upstream. Commit 79c6ab50 (clk: divider: add CLK_DIVIDER_READ_ONLY flag) in v3.16 introduced the CLK_DIVIDER_READ_ONLY flag which caused the recalc_rate() and round_rate() clock callbacks to be omitted. However using this flag has the unfortunate side effect of causing the clock recalculation code when a clock rate change is attempted to always treat it as a pass-through clock, i.e. with a fixed divide of 1, which may not be the case. Child clock rates are then recalculated using the wrong parent rate. Therefore instead of dropping the recalc_rate() and round_rate() callbacks, alter clk_divider_bestdiv() to always report the current divider as the best divider so that it is never altered. For me the read only clock was the system clock, which divided the PLL rate by 2, from which both the UART and the SPI clocks were divided. Initial setting of the UART rate set it correctly, but when the SPI clock was set, the other child clocks were miscalculated. The UART clock was recalculated using the PLL rate as the parent rate, resulting in a UART new_rate of double what it should be, and a UART which spewed forth garbage when the rate changes were propagated. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Max Schwarz <max.schwarz@online.de> Acked-by:
Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by:
Michael Turquette <mturquette@linaro.org> [ luis: backported to 3.16: - drop changes to drivers/clk/rockchip/clk.c ] Signed-off-by:
-
- 04 Dec, 2014 10 commits
-
-
Charles Keepax authored
commit c1aefbdd upstream. We can only use page_address on memory that has been mapped using kmap, when the buffer passed to the SPI has been allocated by vmalloc the page has not necessarily been mapped through kmap. This means sometimes page_address will return NULL causing the pointer we pass to sg_set_buf to be invalid. As we only call page_address so that we can pass a virtual address to sg_set_buf which will then immediately call virt_to_page on it, fix this by calling sg_set_page directly rather then relying on the sg_set_buf helper. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Ben Sagal authored
commit bce4f9e7 upstream. The LEN2006 Synaptics touchpad (as found in Thinkpad E540) returns wrong min max values. touchpad-edge-detector output: > Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event6 > Move one finger around the touchpad to detect the actual edges > Kernel says: x [1472..5674], y [1408..4684] > Touchpad sends: x [1264..5675], y [1171..4688] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88211Signed-off-by:
Binyamin Sagal <bensagal@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Axel Lin authored
commit fbbba1f8 upstream. The mcb_device_id table is supposed to be zero-terminated. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Cristina Ciocan authored
commit ccf54555 upstream. The direction field is set on 7 bits, thus we need to AND it with 0111 111 mask in order to retrieve it, that is 0x7F, not 0xCF as it is now. Fixes: ade7ef7b (staging:iio: Differential channel handling) Signed-off-by:
Cristina Ciocan <cristina.ciocan@intel.com> Signed-off-by:
-
Preston Fick authored
commit ffcfe30e upstream. Signed-off-by:
Preston Fick <pffick@gmail.com> Signed-off-by:
-
Thor Thayer authored
commit 0a8727e6 upstream. An IOCTL call that calls spi_setup() and then dw_spi_setup() will overwrite the persisted last transfer speed. On each transfer, the SPI speed is compared to the last transfer speed to determine if the clock divider registers need to be updated (did the speed change?). This bug was observed with the spidev driver using spi-config to update the max transfer speed. This fix: Don't overwrite the persisted last transaction clock speed when updating the SPI parameters in dw_spi_setup(). On the next transaction, the new speed won't match the persisted last speed and the hardware registers will be updated. On initialization, the persisted last transaction clock speed will be 0 but will be updated after the first SPI transaction. Move zeroed clock divider check into clock change test because chip->clk_div is zero on startup and would cause a divide-by-zero error. The calculation was wrong as well (can't support odd #). Reported-by:
Vlastimil Setka <setka@vsis.cz> Signed-off-by:
Thor Thayer <tthayer@opensource.altera.com> Signed-off-by:
-
Thomas Petazzoni authored
commit 2eb04ae0 upstream. There is a missing of_node_put() to decrement the device_node reference counter after a of_find_matching_node() in coherency_init(). Fixes: 501f928e ("ARM: mvebu: add a coherency_available() call") Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1414423955-5933-4-git-send-email-thomas.petazzoni@free-electrons.comSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Gu Zheng authored
commit 835f252c upstream. https://bugzilla.kernel.org/show_bug.cgi?id=86831 Markus reported that when shutting down mysqld (with AIO support, on a ext3 formatted Harddrive) leads to a negative number of dirty pages (underrun to the counter). The negative number results in a drastic reduction of the write performance because the page cache is not used, because the kernel thinks it is still 2 ^ 32 dirty pages open. Add a warn trace in __dec_zone_state will catch this easily: static inline void __dec_zone_state(struct zone *zone, enum zone_stat_item item) { atomic_long_dec(&zone->vm_stat[item]); + WARN_ON_ONCE(item == NR_FILE_DIRTY && atomic_long_read(&zone->vm_stat[item]) < 0); atomic_long_dec(&vm_stat[item]); } [ 21.341632] ------------[ cut here ]------------ [ 21.346294] WARNING: CPU: 0 PID: 309 at include/linux/vmstat.h:242 cancel_dirty_page+0x164/0x224() [ 21.355296] Modules linked in: wutbox_cp sata_mv [ 21.359968] CPU: 0 PID: 309 Comm: kworker/0:1 Not tainted 3.14.21-WuT #80 [ 21.366793] Workqueue: events free_ioctx [ 21.370760] [<c0016a64>] (unwind_backtrace) from [<c0012f88>] (show_stack+0x20/0x24) [ 21.378562] [<c0012f88>] (show_stack) from [<c03f8ccc>] (dump_stack+0x24/0x28) [ 21.385840] [<c03f8ccc>] (dump_stack) from [<c0023ae4>] (warn_slowpath_common+0x84/0x9c) [ 21.393976] [<c0023ae4>] (warn_slowpath_common) from [<c0023bb8>] (warn_slowpath_null+0x2c/0x34) [ 21.402800] [<c0023bb8>] (warn_slowpath_null) from [<c00c0688>] (cancel_dirty_page+0x164/0x224) [ 21.411524] [<c00c0688>] (cancel_dirty_page) from [<c00c080c>] (truncate_inode_page+0x8c/0x158) [ 21.420272] [<c00c080c>] (truncate_inode_page) from [<c00c0a94>] (truncate_inode_pages_range+0x11c/0x53c) [ 21.429890] [<c00c0a94>] (truncate_inode_pages_range) from [<c00c0f6c>] (truncate_pagecache+0x88/0xac) [ 21.439252] [<c00c0f6c>] (truncate_pagecache) from [<c00c0fec>] (truncate_setsize+0x5c/0x74) [ 21.447731] [<c00c0fec>] (truncate_setsize) from [<c013b3a8>] (put_aio_ring_file.isra.14+0x34/0x90) [ 21.456826] [<c013b3a8>] (put_aio_ring_file.isra.14) from [<c013b424>] (aio_free_ring+0x20/0xcc) [ 21.465660] [<c013b424>] (aio_free_ring) from [<c013b4f4>] (free_ioctx+0x24/0x44) [ 21.473190] [<c013b4f4>] (free_ioctx) from [<c003d8d8>] (process_one_work+0x134/0x47c) [ 21.481132] [<c003d8d8>] (process_one_work) from [<c003e988>] (worker_thread+0x130/0x414) [ 21.489350] [<c003e988>] (worker_thread) from [<c00448ac>] (kthread+0xd4/0xec) [ 21.496621] [<c00448ac>] (kthread) from [<c000ec18>] (ret_from_fork+0x14/0x20) [ 21.503884] ---[ end trace 79c4bf42c038c9a1 ]--- The cause is that we set the aio ring file pages as *DIRTY* via SetPageDirty (bypasses the VFS dirty pages increment) when init, and aio fs uses *default_backing_dev_info* as the backing dev, which does not disable the dirty pages accounting capability. So truncating aio ring file will contribute to accounting dirty pages (VFS dirty pages decrement), then error occurs. The original goal is keeping these pages in memory (can not be reclaimed or swapped) in life-time via marking it dirty. But thinking more, we have already pinned pages via elevating the page's refcount, which can already achieve the goal, so the SetPageDirty seems unnecessary. In order to fix the issue, using the __set_page_dirty_no_writeback instead of the nop .set_page_dirty, and dropped the SetPageDirty (don't manually set the dirty flags, don't disable set_page_dirty(), rely on default behaviour). With the above change, the dirty pages accounting can work well. But as we known, aio fs is an anonymous one, which should never cause any real write-back, we can ignore the dirty pages (write back) accounting by disabling the dirty pages (write back) accounting capability. So we introduce an aio private backing dev info (disabled the ACCT_DIRTY/WRITEBACK/ACCT_WB capabilities) to replace the default one. Reported-by:
Markus Königshaus <m.koenigshaus@wut.de> Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
-
Steven Capper authored
commit ded94779 upstream. For LPAE, we have the following means for encoding writable or dirty ptes: L_PTE_DIRTY L_PTE_RDONLY !pte_dirty && !pte_write 0 1 !pte_dirty && pte_write 0 1 pte_dirty && !pte_write 1 1 pte_dirty && pte_write 1 0 So we can't distinguish between writeable clean ptes and read only ptes. This can cause problems with ptes being incorrectly flagged as read only when they are writeable but not dirty. This patch renumbers L_PTE_RDONLY from AP[2] to a software bit #58, and adds additional logic to set AP[2] whenever the pte is read only or not dirty. That way we can distinguish between clean writeable ptes and read only ptes. HugeTLB pages will use this new logic automatically. We need to add some logic to Transparent HugePages to ensure that they correctly interpret the revised pgprot permissions (L_PTE_RDONLY has moved and no longer matches PMD_SECT_AP2). In the process of revising THP, the names of the PMD software bits have been prefixed with L_ to make them easier to distinguish from their hardware bit counterparts. Signed-off-by:
Steve Capper <steve.capper@linaro.org> Reviewed-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Cc: Hou Pengyang <houpengyang@huawei.com> Signed-off-by:
-
Steven Capper authored
commit f2950706 upstream. Long descriptors on ARM are 64 bits, and some pte functions such as pte_dirty return a bitwise-and of a flag with the pte value. If the flag to be tested resides in the upper 32 bits of the pte, then we run into the danger of the result being dropped if downcast. For example: gather_stats(page, md, pte_dirty(*pte), 1); where pte_dirty(*pte) is downcast to an int. This patch introduces a new macro pte_isset which performs the bitwise and, then performs a double logical invert (where needed) to ensure predictable downcasting. The logical inverse pte_isclear is also introduced. Equivalent pmd functions for Transparent HugePages have also been added. Signed-off-by:
-
- 02 Dec, 2014 1 commit
-
-
David Jeffery authored
commit 92a56555 upstream. If a SIGKILL is sent to a task waiting in __nfs_iocounter_wait, it will busy-wait or soft lockup in its while loop. nfs_wait_bit_killable won't sleep, and the loop won't exit on the error return. Stop the busy-wait by breaking out of the loop when nfs_wait_bit_killable returns an error. Signed-off-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> [ kamal: backport to 3.13-stable: context ] Cc: Moritz Mühlenhoff <muehlenhoff@univention.de> Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
- 01 Dec, 2014 23 commits
-
-
Richard Leitner authored
commit 0224ec9e upstream. Fix the format string for serio device name generation to avoid negative device numbers when the id exceeds the maximum signed integer value. Signed-off-by:
Richard Leitner <richard.leitner@skidata.com> Signed-off-by:
-
Tommi Rantala authored
commit 4b546258 upstream. Add the USB ID for the Xbox 360 Thrustmaster Ferrari 458 Racing Wheel. Signed-off-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
-
Benjamin Valentin authored
commit f554f619 upstream. The userspace xboxdrv driver knows some more device ids than the kernel. This patch adds the missing xbox gamepads from [1] to xpad.c [1] https://github.com/Grumbel/xboxdrv/blob/master/src/xpad_device.cppSigned-off-by:
Benjamin Valentin <benpicco@zedat.fu-berlin.de> Signed-off-by:
-
Frank Razenberg authored
commit a7b44738 upstream. The xpad driver recognizes Razer Sabertooth controllers as generic xbox controller, while it is really a 360 controller. This patch adds pid/vid mappings for the controller so that it is correctly recognized. Signed-off-by:
Frank Razenberg <frank@zzattack.org> Signed-off-by:
-
Vincent Zwanenburg authored
commit 89d2975f upstream. usb devices info: T: Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0930 ProdID=0227 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Vincent Zwanenburg <vincentz@topmail.ie> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Anantha Krishnan authored
commit fa2f1394 upstream. Add support for the QCA6174 chip. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 30 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3432 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
Anantha Krishnan <ananthk@codeaurora.org> Signed-off-by:
-
Anatol Pomozov authored
commit 8500d791 upstream. btmrvl_add_card() function calls kthread_run that might return error (e.g. if current thread is killed). If one tries to use the error value as a pointer then invalid memory access oops happens. Check kthread_run() return value, if it is an error then release resources correctly. TEST=boot computer with BT modules enabled. I see the error message that BT device initialization failed. Now kernel does not crash. Hint: to enable BT run 'rmmod btmrvl_sdio; modprobe btmrvl_sdio' Signed-off-by:
Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by:
-
Marcel Holtmann authored
commit c2aef6e8 upstream. The Asus Z97-DELUXE motherboard contains a Broadcom based Bluetooth controller on the USB bus. However vendor and product ID are listed as ASUSTek Computer. T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=17cf Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=54271E910064 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Reported-by:
Jerome Leclanche <jerome@leclan.ch> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Marcel Holtmann authored
commit 72dd2b2a upstream. The ath3k driver is treating the version information badly when it comes to loading the right firmware version and comparing that it actually matches with the hardware. Initially this showed up as this: CHECK drivers/bluetooth/ath3k.c drivers/bluetooth/ath3k.c:373:17: warning: cast to restricted __le32 drivers/bluetooth/ath3k.c:435:17: warning: cast to restricted __le32 However when fixing this by actually using __packed and __le32 for the ath3_version structure, more issues came up: CHECK drivers/bluetooth/ath3k.c drivers/bluetooth/ath3k.c:381:32: warning: incorrect type in assignment (different base types) drivers/bluetooth/ath3k.c:381:32: expected restricted __le32 [usertype] rom_version drivers/bluetooth/ath3k.c:381:32: got int [signed] <noident> drivers/bluetooth/ath3k.c:382:34: warning: incorrect type in assignment (different base types) drivers/bluetooth/ath3k.c:382:34: expected restricted __le32 [usertype] build_version drivers/bluetooth/ath3k.c:382:34: got int [signed] <noident> drivers/bluetooth/ath3k.c:386:28: warning: restricted __le32 degrades to integer drivers/bluetooth/ath3k.c:386:56: warning: restricted __le32 degrades to integer This patch fixes every instance of the firmware version handling and makes sure it is endian safe and uses proper unaligned access. Signed-off-by:
-
Marcel Holtmann authored
commit d92f2df0 upstream. The isochronous endpoints are not valid when the Intel Bluetooth controller boots up in bootloader mode. So just mark these endpoints as broken and then they will not be configured. Signed-off-by:
-
Marcel Holtmann authored
commit 3a5ef20c upstream. The interrupt interface for the Intel USB bootloader devices is only enabled after receiving SetInterface(0, AltSetting=0). When this USB command is not send, then no HCI events will be received. Signed-off-by:
-
Marcel Holtmann authored
commit 40df783d upstream. Intel Bluetooth devices that boot up in bootloader mode can not be used as generic HCI devices, but their HCI transport is still valuable and so bring that up as raw-only devices. T: Bus=02 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 14 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0a5a Rev= 0.00 S: Manufacturer=Intel(R) Corporation S: Product=Intel(R) Wilkins Peak 2x2 S: SerialNumber=001122334455 WP_A0 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
-
Reyad Attiyat authored
commit 46df9ded upstream. Set disconnected flag in struct usbhid when a usb device is removed. Check for disconnected flag before sending urb requests. This prevents a kernel panic when a hid driver calls hid_hw_request() after removing a usb device. BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290 PGD 0 Oops: 0002 [#1] PREEMPT SMP CPU: 2 PID: 39 Comm: khubd Tainted: G IO 3.16.0-rc5+ #112 Hardware name: Microsoft Corporation Surface Pro 2/Surface Pro 2, BIOS 2.03.0250 09/06/2013 task: ffff880118aba6e0 ti: ffff8800daf80000 task.ti: ffff8800daf80000 RIP: 0010:[<ffffffff8161746f>] [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290 RSP: 0018:ffff8800daf83750 EFLAGS: 00010086 RAX: 0000000080000300 RBX: ffff88003f60c000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880117f78000 RBP: ffff8800daf83788 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff880117f78000 R13: ffff88003f11a290 R14: 000000000000000c R15: ffff880091cb3ab8 FS: 0000000000000000(0000) GS:ffff88011b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 0000000001c11000 CR4: 00000000001407e0 Stack: ffff880117f3dcd0 ffff880117f78000 ffff88003f60c000 ffff880117f78000 ffff880117f78000 ffff88003f11a290 0000000000000000 ffff8800daf837b0 ffffffff81617707 ffff880117f78000 ffff88003f60c000 0000000000000013 Call Trace: [<ffffffff81617707>] usbhid_restart_ctrl_queue+0x87/0x140 [<ffffffff81617a88>] usbhid_submit_report+0x2c8/0x370 [<ffffffff81617b4a>] usbhid_request+0x1a/0x30 [<ffffffffa020edfb>] sensor_hub_set_feature+0x8b/0xd0 [hid_sensor_hub] [<ffffffffa02d9084>] hid_sensor_power_state+0x84/0x110 [hid_sensor_trigger] [<ffffffffa02d9129>] hid_sensor_data_rdy_trigger_set_state+0x19/0x20 [hid_sensor_trigger] [<ffffffffa034d5b7>] iio_triggered_buffer_predisable+0xa7/0xb0 [industrialio] [<ffffffffa034cc4a>] iio_disable_all_buffers+0x3a/0xc0 [industrialio] [<ffffffffa03487d3>] iio_device_unregister+0x53/0x80 [industrialio] [<ffffffffa026c06a>] hid_accel_3d_remove+0x2a/0x50 [hid_sensor_accel_3d] [<ffffffff814f433d>] platform_drv_remove+0x1d/0x40 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81512190>] ? mfd_cell_disable+0x80/0x80 [<ffffffff814f41d1>] platform_device_del+0x21/0xc0 [<ffffffff814f4282>] platform_device_unregister+0x12/0x30 [<ffffffff815121d3>] mfd_remove_devices_fn+0x43/0x50 [<ffffffff814ed3e3>] device_for_each_child+0x43/0x70 [<ffffffff81512105>] mfd_remove_devices+0x25/0x30 [<ffffffffa020ebd7>] sensor_hub_remove+0x87/0x140 [hid_sensor_hub] [<ffffffff81607c5b>] hid_device_remove+0x6b/0xd0 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81607d47>] hid_destroy_device+0x27/0x60 [<ffffffff81616972>] usbhid_disconnect+0x22/0x50 [<ffffffff81568597>] usb_unbind_interface+0x77/0x2b0 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81565cd1>] usb_disable_device+0x91/0x2a0 [<ffffffff8155b046>] usb_disconnect+0x96/0x2e0 [<ffffffff8155d74a>] hub_thread+0xb5a/0x1840 Signed-off-by:
Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Andreas Schwab authored
commit 7c2105fb upstream. This fixes the following build failure when building with CONFIG_MODVERSIONS enabled: CC [M] arch/arm64/crypto/aes-glue-ce.o ld: cannot find arch/arm64/crypto/aes-glue-ce.o: No such file or directory make[1]: *** [arch/arm64/crypto/aes-ce-blk.o] Error 1 make: *** [arch/arm64/crypto] Error 2 The $(obj)/aes-glue-%.o rule only creates $(obj)/.tmp_aes-glue-ce.o, it should use if_changed_rule instead of if_changed_dep. Signed-off-by:
Andreas Schwab <schwab@suse.de> [ardb: mention CONFIG_MODVERSIONS in commit log] Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Devin Ryles authored
commit b4565913 upstream. This patch adds DeviceIDs for Sunrise Point-LP Signed-off-by:
Devin Ryles <devin.ryles@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
James Ralston authored
commit c8b00fd2 upstream. This patch adds the HD Audio Device IDs for the Intel Sunrise Point PCH. [the item position rearranged by tiwai] Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
-
Robert Jarzmik authored
commit cde7fc87 upstream. The commit 2111667b ("ARM: pxa: call debug_ll_io_init for earlyprintk") triggers in the current kernel the attached backtrace on PXA/tosa early in the boot time when DEBUG_LL is enabled. It is due to overlap between uart virtual memory defined in DEBUG_UART_VIRT and mapped by debug_ll_io_init() and peripheral bus mapped by pxa_map_io at the same address, 0xf2100000. As hinted by Arnd, map early virtual memory for low level debug on address 0xf6200000, even if that means 2 virtual mappings will give access to the pxa internal UARTs (FFUART, BTUART, STUART, ...). ------------[ cut here ]------------ kernel BUG at /home/lumag/linux/mm/vmalloc.c:1143! Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.17.0-00032-g8e0d202-dirty #23 task: c062a5a8 ti: c0620000 task.ti: c0620000 PC is at vm_area_add_early+0x54/0x84 LR is at add_static_vm_early+0xc/0x60 pc : [<c03e1100>] lr : [<c03d9ef4>] psr: 800001d3 sp : c0621f04 ip : c03efa74 fp : c03edf84 r10: c0637e98 r9 : 40000001 r8 : c03da57c r7 : c3ffcfb0 r6 : 00000000 r5 : c3ffcfb0 r4 : 02000000 r3 : c3ffcfd8 r2 : f2100000 r1 : f4000000 r0 : c3ffcfb0 Flags: Nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 00007977 Table: a0004000 DAC: 00000017 Process swapper (pid: 0, stack limit = 0xc06201c8) Stack: (0xc0621f04 to 0xc0622000) 1f00: c3ffcfd8 40000001 c3ffcfd8 c03ee08c c03da570 c03db90c c0637d24 1f20: 00000000 c03ec7cc c066e654 a0700000 000a0700 c03db914 c03db90c c03daf84 1f40: 00000000 000a0000 c0000000 c03ec7cc 000a0700 c0700000 ffff1000 000a3fff 1f60: 00001000 00000007 00000000 c03ec7cc c0008000 c03ed748 c0621fd4 c03d5d18 1f80: 69052d00 a03ec48c 00000000 c03d8ad0 0000006c 00007977 c036c6e8 00000001 1fa0: c0621fd4 c03ed744 c0628000 a0004000 69052d00 a03ec48c 00000000 c03d68d4 1fc0: 00000000 00000000 00000000 00000000 00000000 c03ed748 c0649894 c062801c 1fe0: c03ed744 c062b2f0 a0004000 69052d00 a03ec48c a0008040 00000000 00000000 [<c03e1100>] (vm_area_add_early) from [<c03d9ef4>] (add_static_vm_early+0xc/0x60) [<c03d9ef4>] (add_static_vm_early) from [<c03da570>] (iotable_init.part.6+0xa8/0xb4) [<c03da570>] (iotable_init.part.6) from [<c03db914>] (pxa25x_map_io+0x8/0x24) [<c03db914>] (pxa25x_map_io) from [<c03daf84>] (paging_init+0x744/0x8d8) [<c03daf84>] (paging_init) from [<c03d8ad0>] (setup_arch+0x354/0x608) [<c03d8ad0>] (setup_arch) from [<c03d68d4>] (start_kernel+0xa8/0x3dc) [<c03d68d4>] (start_kernel) from [<a0008040>] (0xa0008040) Code: e5904008 e0811004 e1520001 2a000005 (e7f001f2) ---[ end trace f24b6c88ae00fa9a ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task! Reported-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Acked-by:
Arnd Bergmann <arnd@arndb.de> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Mikhail Efremov authored
commit d2fa4a84 upstream. Only exchange source and destination filenames if flags contain RENAME_EXCHANGE. In case if executable file was running and replaced by other file /proc/PID/exe should still show correct file name, not the old name of the file by which it was replaced. The scenario when this bug manifests itself was like this: * ALT Linux uses rpm and start-stop-daemon; * during a package upgrade rpm creates a temporary file for an executable to rename it upon successful unpacking; * start-stop-daemon is run subsequently and it obtains the (nonexistant) temporary filename via /proc/PID/exe thus failing to identify the running process. Note that "long" filenames (> DNAiME_INLINE_LEN) are still exchanged without RENAME_EXCHANGE and this behaviour exists long enough (should be fixed too apparently). So this patch is just an interim workaround that restores behavior for "short" names as it was before changes introduced by commit da1ce067 ("vfs: add cross-rename"). See https://lkml.org/lkml/2014/9/7/6 for details. AV: the comments about being more careful with ->d_name.hash than with ->d_name.name are from back in 2.3.40s; they became obsolete by 2.3.60s, when we started to unhash the target instead of swapping hash chain positions followed by d_delete() as we used to do when dcache was first introduced. Acked-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Fixes: da1ce067 "vfs: add cross-rename" Signed-off-by:
Mikhail Efremov <sem@altlinux.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> [ luis: used Stefan's backport to 3.16 ] Signed-off-by:
-
Linus Torvalds authored
commit a28ddb87 upstream. and do it along with ->d_name.len there Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andy Lutomirski authored
commit 6f442be2 upstream. On a 32-bit kernel, this has no effect, since there are no IST stacks. On a 64-bit kernel, #SS can only happen in user code, on a failed iret to user space, a canonical violation on access via RSP or RBP, or a genuine stack segment violation in 32-bit kernel code. The first two cases don't need IST, and the latter two cases are unlikely fatal bugs, and promoting them to double faults would be fine. This fixes a bug in which the espfix64 code mishandles a stack segment violation. This saves 4k of memory per CPU and a tiny bit of code. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Alex Deucher authored
commit 28731d58 upstream. Value needs to be swapped on BE. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Chris Moore authored
commit b1a5ad00 upstream. isert has an issue of trying to create a CQ with more CQEs than are supported by the hardware, that currently results in failures during isert_device creation during first session login. This is the isert version of the patch that Minh Tran submitted for iser, and is simple a workaround required to function with existing ocrdma hardware. Signed-off-by:
Chris Moore <chris.moore@emulex.com> Reviewied-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Rafael J. Wysocki authored
commit 78579b7c upstream. As reported by Dmitry, on some Chromebooks there are devices with corresponding ACPI objects and with unusual system wakeup configuration. Namely, they technically are wakeup-capable, but the wakeup is handled via a platform-specific out-of-band mechanism and the ACPI PM layer has no information on the wakeup capability. As a result, device_may_wakeup(dev) called from acpi_dev_suspend_late() returns 'true' for those devices, but the wakeup.flags.valid flag is unset for the corresponding ACPI device objects, so acpi_device_wakeup() reproducibly fails for them causing acpi_dev_suspend_late() to return an error code. The entire system suspend is then aborted and the machines in question cannot suspend at all. Address the problem by ignoring the device_may_wakeup(dev) return value in acpi_dev_suspend_late() if the ACPI companion of the device being handled has wakeup.flags.valid unset (in which case it is clear that the wakeup is supposed to be handled by other means). This fixes a regression introduced by commit a76e9bd8 (i2c: attach/detach I2C client device to the ACPI power domain) as the affected systems could suspend and resume successfully before that commit. Fixes: a76e9bd8 (i2c: attach/detach I2C client device to the ACPI power domain) Reported-by:
Dmitry Torokhov <dtor@chromium.org> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
