- 16 Mar, 2024 1 commit
-
-
Josef Bacik authored
We've been seeing the following panic in production BUG: kernel NULL pointer dereference, address: 0000000000000065 PGD 2f485f067 P4D 2f485f067 PUD 2cc5d8067 PMD 0 RIP: 0010:ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles] Call Trace: <TASK> ? __die+0x78/0xc0 ? page_fault_oops+0x286/0x380 ? __rpc_execute+0x2c3/0x470 [sunrpc] ? rpc_new_task+0x42/0x1c0 [sunrpc] ? exc_page_fault+0x5d/0x110 ? asm_exc_page_fault+0x22/0x30 ? ff_layout_free_layoutreturn+0x110/0x110 [nfs_layout_flexfiles] ? ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles] ? ff_layout_cancel_io+0x6f/0x90 [nfs_layout_flexfiles] pnfs_mark_matching_lsegs_return+0x1b0/0x360 [nfsv4] pnfs_error_mark_layout_for_return+0x9e/0x110 [nfsv4] ? ff_layout_send_layouterror+0x50/0x160 [nfs_layout_flexfiles] nfs4_ff_layout_prepare_ds+0x11f/0x290 [nfs_layout_flexfiles] ff_layout_pg_init_write+0xf0/0x1f0 [nfs_layout_flexfiles] __nfs_pageio_add_request+0x154/0x6c0 [nfs] nfs_pageio_add_request+0x26b/0x380 [nfs] nfs_do_writepage+0x111/0x1e0 [nfs] nfs_writepages_callback+0xf/0x30 [nfs] write_cache_pages+0x17f/0x380 ? nfs_pageio_init_write+0x50/0x50 [nfs] ? nfs_writepages+0x6d/0x210 [nfs] ? nfs_writepages+0x6d/0x210 [nfs] nfs_writepages+0x125/0x210 [nfs] do_writepages+0x67/0x220 ? generic_perform_write+0x14b/0x210 filemap_fdatawrite_wbc+0x5b/0x80 file_write_and_wait_range+0x6d/0xc0 nfs_file_fsync+0x81/0x170 [nfs] ? nfs_file_mmap+0x60/0x60 [nfs] __x64_sys_fsync+0x53/0x90 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Inspecting the core with drgn I was able to pull this >>> prog.crashed_thread().stack_trace()[0] #0 at 0xffffffffa079657a (ff_layout_cancel_io+0x3a/0x84) in ff_layout_cancel_io at fs/nfs/flexfilelayout/flexfilelayout.c:2021:27 >>> prog.crashed_thread().stack_trace()[0]['idx'] (u32)1 >>> prog.crashed_thread().stack_trace()[0]['flseg'].mirror_array[1].mirror_ds (struct nfs4_ff_layout_ds *)0xffffffffffffffed This is clear from the stack trace, we call nfs4_ff_layout_prepare_ds() which could error out initializing the mirror_ds, and then we go to clean it all up and our check is only for if (!mirror->mirror_ds). This is inconsistent with the rest of the users of mirror_ds, which have if (IS_ERR_OR_NULL(mirror_ds)) to keep from tripping over this exact scenario. Fix this up in ff_layout_cancel_io() to make sure we don't panic when we get an error. I also spot checked all the other instances of checking mirror_ds and we appear to be doing the correct checks everywhere, only unconditionally dereferencing mirror_ds when we know it would be valid. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Fixes: b739a5bd ("NFSv4/flexfiles: Cancel I/O if the layout is recalled or revoked") Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com>
-
- 09 Mar, 2024 17 commits
-
-
Chen Hanxiao authored
Trace the mount option fsc=xxx. Signed-off-by:
Chen Hanxiao <chenhx.fnst@fujitsu.com> Signed-off-by:
-
Benjamin Coddington authored
The netfs conversion lost a folio_unlock() for the case where nfs_page_create_from_folio() returns an error (usually -ENOMEM). Restore it. Reported-by:
David Jeffery <djeffery@redhat.com> Cc: <stable@vger.kernel.org> # 6.4+ Fixes: 000dbe0b ("NFS: Convert buffered read paths to use netfs when fscache is enabled") Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Acked-by:
Dave Wysochanski <dwysocha@redhat.com> Signed-off-by:
-
Trond Myklebust authored
Signed-off-by: -
Josef Bacik authored
In production we have been hitting the following warning consistently ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 17 PID: 1800359 at lib/refcount.c:28 refcount_warn_saturate+0x9c/0xe0 Workqueue: nfsiod nfs_direct_write_schedule_work [nfs] RIP: 0010:refcount_warn_saturate+0x9c/0xe0 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x9f/0x130 ? refcount_warn_saturate+0x9c/0xe0 ? report_bug+0xcc/0x150 ? handle_bug+0x3d/0x70 ? exc_invalid_op+0x16/0x40 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0x9c/0xe0 nfs_direct_write_schedule_work+0x237/0x250 [nfs] process_one_work+0x12f/0x4a0 worker_thread+0x14e/0x3b0 ? ZSTD_getCParams_internal+0x220/0x220 kthread+0xdc/0x120 ? __btf_name_valid+0xa0/0xa0 ret_from_fork+0x1f/0x30 This is because we're completing the nfs_direct_request twice in a row. The source of this is when we have our commit requests to submit, we process them and send them off, and then in the completion path for the commit requests we have if (nfs_commit_end(cinfo.mds)) nfs_direct_write_complete(dreq); However since we're submitting asynchronous requests we sometimes have one that completes before we submit the next one, so we end up calling complete on the nfs_direct_request twice. The only other place we use nfs_generic_commit_list() is in __nfs_commit_inode, which wraps this call in a nfs_commit_begin(); nfs_commit_end(); Which is a common pattern for this style of completion handling, one that is also repeated in the direct code with get_dreq()/put_dreq() calls around where we process events as well as in the completion paths. Fix this by using the same pattern for the commit requests. Before with my 200 node rocksdb stress running this warning would pop every 10ish minutes. With my patch the stress test has been running for several hours without popping. Signed-off-by:
-
Josef Bacik authored
We protect accesses to the nfs_direct_req fields with the dreq->lock ever where except nfs_direct_commit_complete. This isn't a huge deal, but it does lead to confusion, and we could potentially end up setting NFS_ODIRECT_RESCHED_WRITES in one thread where we've had an error in another. Clean this up to properly protect ->error and ->flags in the commit completion path. Signed-off-by:
-
Trond Myklebust authored
It appears that in certain cases, RDMA capable transports can benefit from the ability to establish multiple connections to increase their throughput. This patch therefore enables the use of the "nconnect" mount option for those use cases. Signed-off-by: -
Trond Myklebust authored
We're seeing spurious calls to nfs4_schedule_stateid_recovery() from nfs4_do_open() in situations where there is no trigger coming from the server. In theory the code path being triggered is supposed to notice that state recovery happened while we were processing the open call result from the server, before the open stateid is published. However in the years since that code was added, we've also added the 'session draining' mechanism, which ensures that the state recovery will wait until all the session slots have been returned. In nfs4_do_open() the session slot is only returned on exit of the function, so we don't need the legacy mechanism. Signed-off-by: -
NeilBrown authored
If pnfsd_update_layout() is called on a file for which recovery has failed it will enter a tight infinite loop. NFS_LAYOUT_INVALID_STID will be set, nfs4_select_rw_stateid() will return -EIO, and nfs4_schedule_stateid_recovery() will do nothing, so nfs4_client_recover_expired_lease() will not wait. So the code will loop indefinitely. Break the loop by testing the validity of the open stateid at the top of the loop. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
nfs_writepage_locked() is only called from nfs_wb_folio() (since Commit 12fc0a96 ("nfs: Remove writepage")) so ->sync_mode is always WB_SYNC_ALL. This means the test for WB_SYNC_NONE is dead code and can be removed. Signed-off-by:
-
Olga Kornievskaia authored
Currently, even though xprtsec=tls is specified and used for operations to MDS, any operations that go to DS travel over unencrypted connection. Or additionally, if more than 1 DS can serve the data, then trunked connections are also done unencrypted. IN GETDEVINCEINFO, we get an entry for the DS which carries a protocol type (which is TCP), then nfs4_set_ds_client() gets called with TCP instead of TCP with TLS. Currently, each trunked connection is created and uses clp->cl_hostname value which if TLS is used would get passed up in the handshake upcall, but instead we need to pass in the appropriate trunked address value. Fixes: c8407f2e ("NFS: Add an "xprtsec=" NFS mount option") Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
-
Christophe JAILLET authored
The intent is to check if 'dest' is truncated or not. So, >= should be used instead of >, because strlcat() returns the length of 'dest' and 'src' excluding the trailing NULL. Fixes: 56463e50 ("NFS: Use super.c for NFSROOT mount option parsing") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
-
Josef Bacik authored
Now that we're exposing the rpc stats on a per-network namespace basis, move this struct into struct nfs_net and use that to make sure only the per-network namespace stats are exposed. Signed-off-by:
-
Josef Bacik authored
We're using nfs mounts inside of containers in production and noticed that the nfs stats are not exposed in /proc. This is a problem for us as we use these stats for monitoring, and have to do this awkward bind mount from the main host into the container in order to get to these states. Add the rpc_proc_register call to the pernet operations entry and exit points so these stats can be exposed inside of network namespaces. Signed-off-by:
-
Josef Bacik authored
We want to be able to have our rpc stats handled in a per network namespace manner, so add an option to rpc_create_args to specify a different rpc_stats struct instead of using the one on the rpc_program. Signed-off-by:
-
Jeff Layton authored
Nothing uses this, and thank goodness, as the syntax looks horrid. Signed-off-by:
-
Olga Kornievskaia authored
Add a tracepoint to track when the client sends EXCHANGE_ID to test a new transport for session trunking. nfs4_detect_session_trunking() tests for trunking and returns EINVAL if trunking can't be done, add EINVAL mapping to show_nfs4_status() in tracepoints. Signed-off-by:
-
Dave Wysochanski authored
The loop inside nfs_netfs_issue_read() currently does not disable interrupts while iterating through pages in the xarray to submit for NFS read. This is not safe though since after taking xa_lock, another page in the mapping could be processed for writeback inside an interrupt, and deadlock can occur. The fix is simple and clean if we use xa_for_each_range(), which handles the iteration with RCU while reducing code complexity. The problem is easily reproduced with the following test: mount -o vers=3,fsc 127.0.0.1:/export /mnt/nfs dd if=/dev/zero of=/mnt/nfs/file1.bin bs=4096 count=1 echo 3 > /proc/sys/vm/drop_caches dd if=/mnt/nfs/file1.bin of=/dev/null umount /mnt/nfs On the console with a lockdep-enabled kernel a message similar to the following will be seen: ================================ WARNING: inconsistent lock state 6.7.0-lockdbg+ #10 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. test5/1708 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888127baa598 (&xa->xa_lock#4){+.?.}-{3:3}, at: nfs_netfs_issue_read+0x1b2/0x4b0 [nfs] {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x144/0x380 _raw_spin_lock_irqsave+0x4e/0xa0 __folio_end_writeback+0x17e/0x5c0 folio_end_writeback+0x93/0x1b0 iomap_finish_ioend+0xeb/0x6a0 blk_update_request+0x204/0x7f0 blk_mq_end_request+0x30/0x1c0 blk_complete_reqs+0x7e/0xa0 __do_softirq+0x113/0x544 __irq_exit_rcu+0xfe/0x120 irq_exit_rcu+0xe/0x20 sysvec_call_function_single+0x6f/0x90 asm_sysvec_call_function_single+0x1a/0x20 pv_native_safe_halt+0xf/0x20 default_idle+0x9/0x20 default_idle_call+0x67/0xa0 do_idle+0x2b5/0x300 cpu_startup_entry+0x34/0x40 start_secondary+0x19d/0x1c0 secondary_startup_64_no_verify+0x18f/0x19b irq event stamp: 176891 hardirqs last enabled at (176891): [<ffffffffa67a0be4>] _raw_spin_unlock_irqrestore+0x44/0x60 hardirqs last disabled at (176890): [<ffffffffa67a0899>] _raw_spin_lock_irqsave+0x79/0xa0 softirqs last enabled at (176646): [<ffffffffa515d91e>] __irq_exit_rcu+0xfe/0x120 softirqs last disabled at (176633): [<ffffffffa515d91e>] __irq_exit_rcu+0xfe/0x120 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xa->xa_lock#4); <Interrupt> lock(&xa->xa_lock#4); *** DEADLOCK *** 2 locks held by test5/1708: #0: ffff888127baa498 (&sb->s_type->i_mutex_key#22){++++}-{4:4}, at: nfs_start_io_read+0x28/0x90 [nfs] #1: ffff888127baa650 (mapping.invalidate_lock#3){.+.+}-{4:4}, at: page_cache_ra_unbounded+0xa4/0x280 stack backtrace: CPU: 6 PID: 1708 Comm: test5 Kdump: loaded Not tainted 6.7.0-lockdbg+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 Call Trace: dump_stack_lvl+0x5b/0x90 mark_lock+0xb3f/0xd20 __lock_acquire+0x77b/0x3360 _raw_spin_lock+0x34/0x80 nfs_netfs_issue_read+0x1b2/0x4b0 [nfs] netfs_begin_read+0x77f/0x980 [netfs] nfs_netfs_readahead+0x45/0x60 [nfs] nfs_readahead+0x323/0x5a0 [nfs] read_pages+0xf3/0x5c0 page_cache_ra_unbounded+0x1c8/0x280 filemap_get_pages+0x38c/0xae0 filemap_read+0x206/0x5e0 nfs_file_read+0xb7/0x140 [nfs] vfs_read+0x2a9/0x460 ksys_read+0xb7/0x140 Fixes: 000dbe0b ("NFS: Convert buffered read paths to use netfs when fscache is enabled") Suggested-by:Jeff Layton <jlayton@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
- 28 Feb, 2024 11 commits
-
-
Dai Ngo authored
When the NFS client is under extreme load the rpc_wait_queue.qlen counter can be overflowed. Here is an instant of the backlog queue overflow in a real world environment shown by drgn helper: rpc_task_stats(rpc_clnt): ------------------------- rpc_clnt: 0xffff92b65d2bae00 rpc_xprt: 0xffff9275db64f000 Queue: sending[64887] pending[524] backlog[30441] binding[0] XMIT task: 0xffff925c6b1d8e98 WRITE: 750654 __dta_call_status_580: 65463 __dta_call_transmit_status_579: 1 call_reserveresult: 685189 nfs_client_init_is_complete: 1 COMMIT: 584 call_reserveresult: 573 __dta_call_status_580: 11 ACCESS: 1 __dta_call_status_580: 1 GETATTR: 10 __dta_call_status_580: 4 call_reserveresult: 6 751249 tasks for server 111.222.333.444 Total tasks: 751249 count_rpc_wait_queues(xprt): ---------------------------- **** rpc_xprt: 0xffff9275db64f000 num_reqs: 65511 wait_queue: xprt_binding[0] cnt: 0 wait_queue: xprt_binding[1] cnt: 0 wait_queue: xprt_binding[2] cnt: 0 wait_queue: xprt_binding[3] cnt: 0 rpc_wait_queue[xprt_binding].qlen: 0 maxpriority: 0 wait_queue: xprt_sending[0] cnt: 0 wait_queue: xprt_sending[1] cnt: 64887 wait_queue: xprt_sending[2] cnt: 0 wait_queue: xprt_sending[3] cnt: 0 rpc_wait_queue[xprt_sending].qlen: 64887 maxpriority: 3 wait_queue: xprt_pending[0] cnt: 524 wait_queue: xprt_pending[1] cnt: 0 wait_queue: xprt_pending[2] cnt: 0 wait_queue: xprt_pending[3] cnt: 0 rpc_wait_queue[xprt_pending].qlen: 524 maxpriority: 0 wait_queue: xprt_backlog[0] cnt: 0 wait_queue: xprt_backlog[1] cnt: 685801 wait_queue: xprt_backlog[2] cnt: 0 wait_queue: xprt_backlog[3] cnt: 0 rpc_wait_queue[xprt_backlog].qlen: 30441 maxpriority: 3 [task cnt mismatch] There is no effect on operations when this overflow occurs. However it causes confusion when trying to diagnose the performance problem. Signed-off-by:Dai Ngo <dai.ngo@oracle.com> Reviewed-by:
-
Chen Hanxiao authored
Setting the uniquifier for fscache via the fsc= mount option is currently broken in NFSv4. Fix this by passing fscache_uniq to root_fc if possible. Signed-off-by:
-
Olga Kornievskaia authored
While decoding filelayout getdeviceinfo received, print out the information about the location of data servers (IPs). Generic getdeviceinfo tracepoints prints the MDS's ip for the dstaddr. In this patch, separate the MDS's address from the DS's addresses. Signed-off-by:
-
Jorge Mora authored
Switch order of operations to avoid creating a short XDR buffer: e.g., buflen = 12, old xdrlen = 12, new xdrlen = 20. Having a short XDR buffer leads to lxa_maxcount be a few bytes less than what is needed to retrieve the whole list when using a buflen as returned by a call with size = 0: buflen = listxattr(path, NULL, 0); buf = malloc(buflen); buflen = listxattr(path, buf, buflen); For a file with one attribute (name = '123456'), the first call with size = 0 will return buflen = 12 ('user.123456\x00'). The second call with size = 12, sends LISTXATTRS with lxa_maxcount = 12 + 8 (cookie) + 4 (array count) = 24. The XDR buffer needs 8 (cookie) + 4 (array count) + 4 (name count) + 6 (name len) + 2 (padding) + 4 (eof) = 28 which is 4 bytes shorter than the lxa_maxcount provided in the call. Fixes: 04a5da69 ("NFSv4.2: define limits and sizes for user xattr handling") Signed-off-by:Jorge Mora <mora@netapp.com> Reviewed-by:
-
Jorge Mora authored
A call to listxattr() with a buffer size = 0 returns the actual size of the buffer needed for a subsequent call. When size > 0, nfs4_listxattr() does not return an error because either generic_listxattr() or nfs4_listxattr_nfs4_label() consumes exactly all the bytes then size is 0 when calling nfs4_listxattr_nfs4_user() which then triggers the following kernel BUG: [ 99.403778] kernel BUG at mm/usercopy.c:102! [ 99.404063] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 99.408463] CPU: 0 PID: 3310 Comm: python3 Not tainted 6.6.0-61.fc40.aarch64 #1 [ 99.415827] Call trace: [ 99.415985] usercopy_abort+0x70/0xa0 [ 99.416227] __check_heap_object+0x134/0x158 [ 99.416505] check_heap_object+0x150/0x188 [ 99.416696] __check_object_size.part.0+0x78/0x168 [ 99.416886] __check_object_size+0x28/0x40 [ 99.417078] listxattr+0x8c/0x120 [ 99.417252] path_listxattr+0x78/0xe0 [ 99.417476] __arm64_sys_listxattr+0x28/0x40 [ 99.417723] invoke_syscall+0x78/0x100 [ 99.417929] el0_svc_common.constprop.0+0x48/0xf0 [ 99.418186] do_el0_svc+0x24/0x38 [ 99.418376] el0_svc+0x3c/0x110 [ 99.418554] el0t_64_sync_handler+0x120/0x130 [ 99.418788] el0t_64_sync+0x194/0x198 [ 99.418994] Code: aa0003e3 d000a3e0 91310000 97f49bdb (d4210000) Issue is reproduced when generic_listxattr() returns 'system.nfs4_acl', thus calling lisxattr() with size = 16 will trigger the bug. Add check on nfs4_listxattr() to return ERANGE error when it is called with size > 0 and the return value is greater than size. Fixes: 012a211a ("NFSv4.2: hook in the user extended attribute handlers") Signed-off-by:
-
Chen Hanxiao authored
With this patch, mount command will show fsc=xxx if set: If -o fsc=6666 clientaddr=192.168.122.208,fsc=6666,local_lock=none If only -o fsc clientaddr=192.168.122.208,fsc,local_lock=none Signed-off-by:
-
Olga Kornievskaia authored
In order to get the latency per xprt under the same clientid this patch adds xprt_id to the tracepoint output. Signed-off-by:
-
Christophe JAILLET authored
The intent is to check if the strings' are truncated or not. So, >= should be used instead of >, because strlcat() and snprintf() return the length of the output, excluding the trailing NULL. Fixes: a02d6926 ("SUNRPC: Provide functions for managing universal addresses") Signed-off-by:
-
Trond Myklebust authored
Add a transport level callback to allow it to handle the consequences of dequeuing the request that was in the process of being transmitted. For something like a TCP connection, we may need to disconnect if the request was partially transmitted. Signed-off-by: -
Trond Myklebust authored
If the connection has been scheduled to shut down, we must assume that the socket is not in a state to accept further transmissions until the connection has been re-established. Signed-off-by: -
Trond Myklebust authored
If the TCP connection attempt fails without ever establishing a connection, then assume the problem may be the server is rejecting us due to port reuse. Signed-off-by:
-
- 25 Feb, 2024 11 commits
-
-
Linus Torvalds authored
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull bcachefs fixes from Kent Overstreet: "Some more mostly boring fixes, but some not User reported ones: - the BTREE_ITER_FILTER_SNAPSHOTS one fixes a really nasty performance bug; user reported an untar initially taking two seconds and then ~2 minutes - kill a __GFP_NOFAIL in the buffered read path; this was a leftover from the trickier fix to kill __GFP_NOFAIL in readahead, where we can't return errors (and have to silently truncate the read ourselves). bcachefs can't use GFP_NOFAIL for folio state unlike iomap based filesystems because our folio state is just barely too big, 2MB hugepages cause us to exceed the 2 page threshhold for GFP_NOFAIL. additionally, the flags argument was just buggy, we weren't supplying GFP_KERNEL previously (!)" * tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefs: bcachefs: fix bch2_save_backtrace() bcachefs: Fix check_snapshot() memcpy bcachefs: Fix bch2_journal_flush_device_pins() bcachefs: fix iov_iter count underflow on sub-block dio read bcachefs: Fix BTREE_ITER_FILTER_SNAPSHOTS on inodes btree bcachefs: Kill __GFP_NOFAIL in buffered read path bcachefs: fix backpointer_to_text() when dev does not exist -
Kent Overstreet authored
Missed a call in the previous fix. Signed-off-by:Kent Overstreet <kent.overstreet@linux.dev>
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull two documentation build fixes from Jonathan Corbet: - The XFS online fsck documentation uses incredibly deeply nested subsection and list nesting; that broke the PDF docs build. Tweak a parameter to tell LaTeX to allow the deeper nesting. - Fix a 6.8 PDF-build regression * tag 'docs-6.8-fixes3' of git://git.lwn.net/linux: docs: translations: use attribute to store current language docs: Instruct LaTeX to cope with deeper nesting
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes for 6.8-rc6 to resolve some reported problems. These include: - regression fixes with typec tpcm code as reported by many - cdnsp and cdns3 driver fixes - usb role setting code bugfixes - build fix for uhci driver - ncm gadget driver bugfix - MAINTAINERS entry update All of these have been in linux-next all week with no reported issues and there is at least one fix in here that is in Thorsten's regression list that is being tracked" * tag 'usb-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: tpcm: Fix issues with power being removed during reset MAINTAINERS: Drop myself as maintainer of TYPEC port controller drivers usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role" usb: gadget: omap_udc: fix USB gadget regression on Palm TE usb: dwc3: gadget: Don't disconnect if not started usb: cdns3: fix memory double free when handle zero packet usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable() usb: roles: don't get/set_role() when usb_role_switch is unregistered usb: roles: fix NULL pointer issue when put module's reference usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers usb: cdnsp: blocked some cdns3 specific code usb: uhci-grlib: Explicitly include linux/platform_device.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are three small serial/tty driver fixes for 6.8-rc6 that resolve the following reported errors: - riscv hvc console driver fix that was reported by many - amba-pl011 serial driver fix for RS485 mode - stm32 serial driver fix for RS485 mode All of these have been in linux-next all week with no reported problems" * tag 'tty-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: amba-pl011: Fix DMA transmission in RS485 mode serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled tty: hvc: Don't enable the RISC-V SBI console by default
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Make sure clearing CPU buffers using VERW happens at the latest possible point in the return-to-userspace path, otherwise memory accesses after the VERW execution could cause data to land in CPU buffers again * tag 'x86_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM/VMX: Move VERW closer to VMentry for MDS mitigation KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCH x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static key x86/entry_32: Add VERW just before userspace transition x86/entry_64: Add VERW just before userspace transition x86/bugs: Add asm helpers for executing VERW
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Borislav Petkov: - Make sure GICv4 always gets initialized to prevent a kexec-ed kernel from silently failing to set it up - Do not call bus_get_dev_root() for the mbigen irqchip as it always returns NULL - use NULL directly - Fix hardware interrupt number truncation when assigning MSI interrupts - Correct sending end-of-interrupt messages to disabled interrupts lines on RISC-V PLIC * tag 'irq_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Do not assume vPE tables are preallocated irqchip/mbigen: Don't use bus_get_dev_root() to find the parent PCI/MSI: Prevent MSI hardware interrupt number truncation irqchip/sifive-plic: Enable interrupt if needed before EOI
-
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs fix from Gao Xiang: - Fix page refcount leak when looking up specific inodes introduced by metabuf reworking * tag 'erofs-for-6.8-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: fix refcount on the metabuf used for inode lookup
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull RCU pathwalk fixes from Al Viro: "We still have some races in filesystem methods when exposed to RCU pathwalk. This series is a result of code audit (the second round of it) and it should deal with most of that stuff. Still pending: ntfs3 ->d_hash()/->d_compare() and ceph_d_revalidate(). Up to maintainers (a note for NTFS folks - when documentation says that a method may not block, it *does* imply that blocking allocations are to be avoided. Really)" [ More explanations for people who aren't familiar with the vagaries of RCU path walking: most of it is hidden from filesystems, but if a filesystem actively participates in the low-level path walking it needs to make sure the fields involved in that walk are RCU-safe. That "actively participate in low-level path walking" includes things like having its own ->d_hash()/->d_compare() routines, or by having its own directory permission function that doesn't just use the common helpers. Having a ->d_revalidate() function will also have this issue. Note that instead of making everything RCU safe you can also choose to abort the RCU pathwalk if your operation cannot be done safely under RCU, but that obviously comes with a performance penalty. One common pattern is to allow the simple cases under RCU, and abort only if you need to do something more complicated. So not everything needs to be RCU-safe, and things like the inode etc that the VFS itself maintains obviously already are. But these fixes tend to be about properly RCU-delaying things like ->s_fs_info that are maintained by the filesystem and that got potentially released too early. - Linus ] * tag 'pull-fixes.pathwalk-rcu-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ext4_get_link(): fix breakage in RCU mode cifs_get_link(): bail out in unsafe case fuse: fix UAF in rcu pathwalks procfs: make freeing proc_fs_info rcu-delayed procfs: move dropping pde and pid from ->evict_inode() to ->free_inode() nfs: fix UAF on pathwalk running into umount nfs: make nfs_set_verifier() safe for use in RCU pathwalk afs: fix __afs_break_callback() / afs_drop_open_mmap() race hfsplus: switch to rcu-delayed unloading of nls and freeing ->s_fs_info exfat: move freeing sbi, upcase table and dropping nls into rcu-delayed helper affs: free affs_sb_info with kfree_rcu() rcu pathwalk: prevent bogus hard errors from may_lookup() fs/super.c: don't drop ->s_user_ns until we free struct super_block itself
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "A couple of fixes - revert of regression from this cycle and a fix for erofs failure exit breakage (had been there since way back)" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: erofs: fix handling kern_mount() failure Revert "get rid of DCACHE_GENOCIDE"
-
