- 25 Aug, 2017 40 commits
-
-
Hannes Reinecke authored
bus reset is a host reset without nsp32hw_init(), and will always return SUCCESS, thus disabling the use of host reset. So drop bus reset in favour of host reset. Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
qedf has a host reset handler, but as the bus reset handler is a stub always returning SUCCESS the host reset is never invoked. So drop the bus reset handler. Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
-
Hannes Reinecke authored
bus_reset and host_reset are the same functions, so drop bus_reset. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Hannes Reinecke authored
host_reset and bus_reset is the same function, so drop bus reset. Signed-off-by:
-
Hannes Reinecke authored
The bus reset handler is really a host reset. Signed-off-by:
-
Hannes Reinecke authored
The bus reset handler really is a host reset, so move it to eh_bus_reset_handler. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Reviewed-by:
-
Hannes Reinecke authored
The bus reset function is really a host reset, so move it to eh_host_reset_handler. Signed-off-by:
-
Hannes Reinecke authored
The bus reset function really is a host reset, so move it to eh_host_reset_handler(). Signed-off-by:
-
Hannes Reinecke authored
Function is a stub, so can as well be dropped. Signed-off-by:
-
Hannes Reinecke authored
The bus reset function is just a wrapper calling host reset under the host lock. So move taking of the host lock into the host reset function and drop bus reset. Signed-off-by:
-
Hannes Reinecke authored
The bus reset function really is a host reset, so move it to eh_host_reset_handler(). Signed-off-by:
-
Hannes Reinecke authored
The Highpoint driver only has one reset function, and that is a host reset. So stop pretending we're doing anything else. Signed-off-by:
-
Hannes Reinecke authored
The bus reset handler is just calling target reset on all targets, which is exactly what SCSI EH will be doing anyway. So move the bus reset function to target reset and drop the loop. Signed-off-by:
-
Hannes Reinecke authored
The bus reset handler is calling I_T Nexus reset, which logically is a target reset as it need to specify both the initiator and the target. So move it to target reset. Signed-off-by:
-
Hannes Reinecke authored
The bus_reset handler is really a device reset, so move it to eh_device_reset_handler(). Signed-off-by:
-
Hannes Reinecke authored
Command abort already returns FAILED, which will then be escalated to a host reset. So no need to call host_reset directly. Signed-off-by:
-
Hannes Reinecke authored
When calling host reset we're resetting all ports anyway, so there is no point in waiting for the ports to become unblocked. Signed-off-by:
-
Hannes Reinecke authored
When we're resetting the host any remote port states will be reset anyway, so it's pointless to wait for dev_loss_tmo during host reset. Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
-
Hannes Reinecke authored
When we're resetting the host any remote port states will be reset anyway, so it's pointless to wait for dev_loss_tmo during host reset. Signed-off-by:
-
Hannes Reinecke authored
The function returns '0' if successful; with the original comment the function doesn't have a way to indicate success ... Signed-off-by:
Bart van Assche <bvanassche@wdc.com> Reviewed-by:
-
Bart Van Assche authored
This patch avoids that gcc reports the following warning when building with W=1: drivers/scsi/iscsi_tcp.c:166:24: warning: variable ?session? set but not used [-Wunused-but-set-variable] Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by:
-
Bart Van Assche authored
This patch avoids that gcc reports the following warning when building with W=1: drivers/scsi/scsi_debug.c:2264:15: warning: variable ?pcontrol? set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Bart Van Assche authored
Avoid that the following compiler warning is reported when building with W=1: drivers/scsi/scsi_transport_srp.c:92:19: warning: comparison is always false due to limited range of data type [-Wtype-limits] Signed-off-by:
-
Bart Van Assche authored
Check whether memory allocation succeeded before dereferencing the pointer to the allocated memory. Signed-off-by:
-
Bart Van Assche authored
Signed-off-by:
-
Bart Van Assche authored
This was detected by building with W=1. Signed-off-by:
-
Bart Van Assche authored
This patch avoids that smatch reports the following: drivers/scsi/libiscsi.c:1081: iscsi_handle_reject() warn: inconsistent indenting Signed-off-by:
-
Bart Van Assche authored
Avoid that sparse reports the following: drivers/scsi/sg.c:1114:41: warning: incorrect type in argument 5 (different address spaces) drivers/scsi/sg.c:1114:41: expected char [noderef] <asn:1>*arg drivers/scsi/sg.c:1114:41: got char *<noident> This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
This patch avoids that gcc reports the following warning when building with W=1: drivers/scsi/sd.c:315:10: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if (val >= 0 && val <= T10_PI_TYPE3_PROTECTION) Signed-off-by:
-
Bart Van Assche authored
This patch avoids that smatch reports the following: drivers/scsi/sd.c:3540: sd_suspend_common() warn: inconsistent indenting Signed-off-by:
-
Bart Van Assche authored
Before scsi_prep_fn() calls the ULP .init_command() callback function it stores the SCSI command pointer in request.special. This means that the SCpnt = rq->special assignments in the sd and sr drivers assign a pointer to itself. Hence convert these two assignment statements into warning statements. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
-
Bart Van Assche authored
Since commit e9c787e6 ("scsi: allocate scsi_cmnd structures as part of struct request") struct request and struct scsi_cmnd are adjacent. This means that there is now an alternative to reading req->special to convert a pointer to a prepared request into a SCSI command pointer, namely by using blk_mq_rq_to_pdu(). Make this change where appropriate. Although this patch does not change any functionality, it slightly improves performance and slightly improves readability. Signed-off-by:
-
Bart Van Assche authored
Rename several functions to make it easy to see which queue type a function is intended for. Signed-off-by:
-
Bart Van Assche authored
This patch avoids that smatch reports the following warning: drivers/scsi/scsi_sysfs.c:117: check_set() error: strncmp() '"-"' too small (2 vs 20) Signed-off-by:
-
Bart Van Assche authored
The conclusion of a recent discussion about the new warnings reported by gcc 7 is that the new warnings reported when building with W=1 should be suppressed. However, gcc 7 still warns about fall-through in switch statements when building with W=1. Suppress these warnings by annotating the SCSI core properly. See also Linus Torvalds, Lots of new warnings with gcc-7.1.1, 11 July 2017 (https://www.mail-archive.com/linux-media@vger.kernel.org/msg115428.html). References: commit bd664f6b ("disable new gcc-7.1.1 warnings for now") Signed-off-by:
-
Bart Van Assche authored
This patch avoids that smatch reports the following: drivers/scsi/scsi_sysfs.c:506 scsi_bus_uevent() warn: argument 3 to %02x specifier has type 'char' drivers/scsi/scsi_sysfs.c:872 sdev_show_modalias() warn: argument 4 to %02x specifier has type 'char' Signed-off-by:
-
Bart Van Assche authored
Commit e9c787e6 ("scsi: allocate scsi_cmnd structures as part of struct request") removed the scsi_get_command() function. Hence also remove the declaration of that function. Signed-off-by:
-
Zang Leigang authored
Signed-off-by:
Zang Leigang <zangleigang@hisilicon.com> Signed-off-by:
-
Dick Kennedy authored
Update driver version to 11.4.0.3 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
-
Maurizio Lombardi authored
cc1: warnings being treated as errors drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_get_wwpn': drivers/scsi/lpfc/lpfc_init.c:3253: error: integer constant is too large for 'long' type Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
-
