1. 01 Nov, 2017 1 commit
  2. 27 Oct, 2017 10 commits
  3. 23 Oct, 2017 2 commits
  4. 20 Oct, 2017 5 commits
    • James Smart's avatar
      nvme-fc: correct io timeout behavior · 134aedc9
      James Smart authored
      The transport io timeout behavior wasn't quite correct. It ignored
      that the io error handler is supposed to be synchronous so it possibly
      allowed the blk request to be restarted while the io associated was
      still aborting. Timeouts on reserved commands, those used for
      association create, were never timing out thus they hung out forever.
      
      To correct:
      If an io is times out while a remoteport is not connected, just
      restart the io timer. The lack of connectivity will simultaneously
      be resetting the controller, so the reset path will abort and terminate
      the io.
      
      If an io is times out while it was marked for transport abort, just
      reset the io timer. The abort process is underway and will complete
      the io.
      
      Otherwise, if an io times out, abort the io. If the abort was
      unsuccessful (unlikely) give up and return not handled.
      
      If the abort was successful, as the abort process is underway it will
      terminate the io, so rather than synchronously waiting, just restart
      the io timer.
      Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
      Reviewed-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      134aedc9
    • James Smart's avatar
      nvme-fc: correct io termination handling · 0a02e39f
      James Smart authored
      The io completion handling for i/o's that are failing due to
      to a transport error or association termination had issues, causing
      io failures (DNR set so retries didn't kick in) or long stalls.
      
      Change the io completion handler for the following items:
      
      When an io has been completed due to a transport abort (based on an
      exchange error) or when marked as aborted as part of an association
      termination (FCOP_FLAGS_TERMIO), set the NVME completion status to
      NVME_SC_ABORTED. By default, do not set DNR on the status so that a
      retry can be attempted after association recreate.
      
      In cases where an io is failed (non-successful nvme status including
      aborted), if the controller is being deleted (blk_queue_dying) or
      the io was part of the ios used for association creation (ctrl state
      is NEW or RECONNECTING), then additionally set the DNR bit so the io
      will not be retried. If the failed io was part of association creation,
      the failure will tear down the partially completioned association and
      typically restart a new reconnect attempt (another create association
      later).
      
      Rearranged code flow to remove a largely unneeded local variable.
      Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
      Reviewed-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      0a02e39f
    • Chaitanya Kulkarni's avatar
      nvme-pci: add SGL support · a7a7cbe3
      Chaitanya Kulkarni authored
      This adds SGL support for NVMe PCIe driver, based on an earlier patch
      from Rajiv Shanmugam Madeswaran <smrajiv15 at gmail.com>. This patch
      refactors the original code and adds new module parameter sgl_threshold
      to determine whether to use SGL or PRP for IOs.
      
      The usage of SGLs is controlled by the sgl_threshold module parameter,
      which allows to conditionally use SGLs if average request segment
      size (avg_seg_size) is greater than sgl_threshold. In the original patch,
      the decision of using SGLs was dependent only on the IO size,
      with the new approach we consider not only IO size but also the
      number of physical segments present in the IO.
      
      We calculate avg_seg_size based on request payload bytes and number
      of physical segments present in the request.
      
      For e.g.:-
      
      1. blk_rq_nr_phys_segments = 2 blk_rq_payload_bytes = 8k
      avg_seg_size = 4K use sgl if avg_seg_size >= sgl_threshold.
      
      2. blk_rq_nr_phys_segments = 2 blk_rq_payload_bytes = 64k
      avg_seg_size = 32K use sgl if avg_seg_size >= sgl_threshold.
      
      3. blk_rq_nr_phys_segments = 16 blk_rq_payload_bytes = 64k
      avg_seg_size = 4K use sgl if avg_seg_size >= sgl_threshold.
      Signed-off-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
      Reviewed-by: default avatarKeith Busch <keith.busch@intel.com>
      Reviewed-by: default avatarSagi Grimberg <sagi@grimberg.me>
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      a7a7cbe3
    • Christoph Hellwig's avatar
      nvme: use ida_simple_{get,remove} for the controller instance · 9843f685
      Christoph Hellwig authored
      Switch to the ida_simple_* helpers instead of opencoding them.
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Reviewed-by: default avatarKeith Busch <keith.busch@intel.com>
      Reviewed-by: default avatarSagi Grimberg <sagi@grimberg.me>
      Reviewed-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
      9843f685
    • Roy Shterman's avatar
      nvmet: Change max_nsid in subsystem due to ns_disable if needed · ba2dec35
      Roy Shterman authored
      In case we disable namespaces which has the nsid like
      subsystem max_nsid we need to search for the next largest nsid
      in this subsystem. If the subsystem don't has more namespaces
      we set it to 0, else we take nsid from the last namespace in
      namespaces list because the list is sorted while inserting.
      Reviewed-by: default avatarMax Gurtovoy <maxg@mellanox.com>
      Reviewed-by: default avatarSagi Grimberg <sagi@grimberg.me>
      Signed-off-by: default avatarRoy Shterman <roys@lightbitslabs.com>
      Reviewed-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
      [hch: slight refactor]
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      ba2dec35
  5. 19 Oct, 2017 4 commits
  6. 18 Oct, 2017 11 commits
  7. 16 Oct, 2017 1 commit
  8. 05 Oct, 2017 1 commit
  9. 04 Oct, 2017 5 commits