- 20 Sep, 2017 12 commits
-
-
Florian Fainelli authored
[ Upstream commit d4fec855 ] There are 3 spots where we call dev_kfree_skb() but we are actually just doing a normal SKB consumption: __bcmgenet_tx_reclaim() for normal TX reclamation, bcmgenet_alloc_rx_buffers() during the initial RX ring setup and bcmgenet_free_rx_buffers() during RX ring cleanup. Fixes: d6707bec ("net: bcmgenet: rewrite bcmgenet_rx_refill()") Fixes: f48bed16 ("net: bcmgenet: Free skb after last Tx frag") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Fainelli authored
[ Upstream commit c45182eb ] Utilize dev_consume_skb_any(cb->skb) in bcm_sysport_free_cb() which is used when a TX packet is completed, as well as when the RX ring is cleaned on shutdown. None of these two cases are packet drops, so be drop monitor friendly. Suggested-by:
Eric Dumazet <edumazet@gmail.com> Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by:
-
Bob Peterson authored
[ Upstream commit 6c7e983b ] In 9dbbfb0a function tipc_sk_reinit had additional logic added to loop in the event that function rhashtable_walk_next() returned -EAGAIN. No worries. However, if rhashtable_walk_start returns -EAGAIN, it does "continue", and therefore skips the call to rhashtable_walk_stop(). That has the effect of calling rcu_read_lock() without its paired call to rcu_read_unlock(). Since rcu_read_lock() may be nested, the problem may not be apparent for a while, especially since resize events may be rare. But the comments to rhashtable_walk_start() state: * ...Note that we take the RCU lock in all * cases including when we return an error. So you must always call * rhashtable_walk_stop to clean up. This patch replaces the continue with a goto and label to ensure a matching call to rhashtable_walk_stop(). Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit e58f9583 ] gcc-8.0.0 (snapshot) points out that we copy a variable-length string into a fixed length field using memcpy() with the destination length, and that ends up copying whatever follows the string: inlined from 'ql_core_dump' at drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:1106:2: drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:708:2: error: 'memcpy' reading 15 bytes from a region of size 14 [-Werror=stringop-overflow=] memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1); Changing it to use strncpy() will instead zero-pad the destination, which seems to be the right thing to do here. The bug is probably harmless, but it seems like a good idea to address it in stable kernels as well, if only for the purpose of building with gcc-8 without warnings. Fixes: a61f8026 ("qlge: Add ethtool register dump function.") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit ee6c88bb ] inet_diag_msg_sctp{,l}addr_fill() and sctp_get_sctp_info() copy sizeof(sockaddr_storage) bytes to fill in sockaddr structs used to export diagnostic information to userspace. However, the memory allocated to store sockaddr information is smaller than that and depends on the address family, so we leak up to 100 uninitialized bytes to userspace. Just use the size of the source structs instead, in all the three cases this is what userspace expects. Zero out the remaining memory. Unused bytes (i.e. when IPv4 addresses are used) in source structs sctp_sockaddr_entry and sctp_transport are already cleared by sctp_add_bind_addr() and sctp_transport_new(), respectively. Noticed while testing KASAN-enabled kernel with 'ss': [ 2326.885243] BUG: KASAN: slab-out-of-bounds in inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] at addr ffff881be8779800 [ 2326.896800] Read of size 128 by task ss/9527 [ 2326.901564] CPU: 0 PID: 9527 Comm: ss Not tainted 4.11.0-22.el7a.x86_64 #1 [ 2326.909236] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 [ 2326.917585] Call Trace: [ 2326.920312] dump_stack+0x63/0x8d [ 2326.924014] kasan_object_err+0x21/0x70 [ 2326.928295] kasan_report+0x288/0x540 [ 2326.932380] ? inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] [ 2326.938500] ? skb_put+0x8b/0xd0 [ 2326.942098] ? memset+0x31/0x40 [ 2326.945599] check_memory_region+0x13c/0x1a0 [ 2326.950362] memcpy+0x23/0x50 [ 2326.953669] inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] [ 2326.959596] ? inet_diag_msg_sctpasoc_fill+0x460/0x460 [sctp_diag] [ 2326.966495] ? __lock_sock+0x102/0x150 [ 2326.970671] ? sock_def_wakeup+0x60/0x60 [ 2326.975048] ? remove_wait_queue+0xc0/0xc0 [ 2326.979619] sctp_diag_dump+0x44a/0x760 [sctp_diag] [ 2326.985063] ? sctp_ep_dump+0x280/0x280 [sctp_diag] [ 2326.990504] ? memset+0x31/0x40 [ 2326.994007] ? mutex_lock+0x12/0x40 [ 2326.997900] __inet_diag_dump+0x57/0xb0 [inet_diag] [ 2327.003340] ? __sys_sendmsg+0x150/0x150 [ 2327.007715] inet_diag_dump+0x4d/0x80 [inet_diag] [ 2327.012979] netlink_dump+0x1e6/0x490 [ 2327.017064] __netlink_dump_start+0x28e/0x2c0 [ 2327.021924] inet_diag_handler_cmd+0x189/0x1a0 [inet_diag] [ 2327.028045] ? inet_diag_rcv_msg_compat+0x1b0/0x1b0 [inet_diag] [ 2327.034651] ? inet_diag_dump_compat+0x190/0x190 [inet_diag] [ 2327.040965] ? __netlink_lookup+0x1b9/0x260 [ 2327.045631] sock_diag_rcv_msg+0x18b/0x1e0 [ 2327.050199] netlink_rcv_skb+0x14b/0x180 [ 2327.054574] ? sock_diag_bind+0x60/0x60 [ 2327.058850] sock_diag_rcv+0x28/0x40 [ 2327.062837] netlink_unicast+0x2e7/0x3b0 [ 2327.067212] ? netlink_attachskb+0x330/0x330 [ 2327.071975] ? kasan_check_write+0x14/0x20 [ 2327.076544] netlink_sendmsg+0x5be/0x730 [ 2327.080918] ? netlink_unicast+0x3b0/0x3b0 [ 2327.085486] ? kasan_check_write+0x14/0x20 [ 2327.090057] ? selinux_socket_sendmsg+0x24/0x30 [ 2327.095109] ? netlink_unicast+0x3b0/0x3b0 [ 2327.099678] sock_sendmsg+0x74/0x80 [ 2327.103567] ___sys_sendmsg+0x520/0x530 [ 2327.107844] ? __get_locked_pte+0x178/0x200 [ 2327.112510] ? copy_msghdr_from_user+0x270/0x270 [ 2327.117660] ? vm_insert_page+0x360/0x360 [ 2327.122133] ? vm_insert_pfn_prot+0xb4/0x150 [ 2327.126895] ? vm_insert_pfn+0x32/0x40 [ 2327.131077] ? vvar_fault+0x71/0xd0 [ 2327.134968] ? special_mapping_fault+0x69/0x110 [ 2327.140022] ? __do_fault+0x42/0x120 [ 2327.144008] ? __handle_mm_fault+0x1062/0x17a0 [ 2327.148965] ? __fget_light+0xa7/0xc0 [ 2327.153049] __sys_sendmsg+0xcb/0x150 [ 2327.157133] ? __sys_sendmsg+0xcb/0x150 [ 2327.161409] ? SyS_shutdown+0x140/0x140 [ 2327.165688] ? exit_to_usermode_loop+0xd0/0xd0 [ 2327.170646] ? __do_page_fault+0x55d/0x620 [ 2327.175216] ? __sys_sendmsg+0x150/0x150 [ 2327.179591] SyS_sendmsg+0x12/0x20 [ 2327.183384] do_syscall_64+0xe3/0x230 [ 2327.187471] entry_SYSCALL64_slow_path+0x25/0x25 [ 2327.192622] RIP: 0033:0x7f41d18fa3b0 [ 2327.196608] RSP: 002b:00007ffc3b731218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 2327.205055] RAX: ffffffffffffffda RBX: 00007ffc3b731380 RCX: 00007f41d18fa3b0 [ 2327.213017] RDX: 0000000000000000 RSI: 00007ffc3b731340 RDI: 0000000000000003 [ 2327.220978] RBP: 0000000000000002 R08: 0000000000000004 R09: 0000000000000040 [ 2327.228939] R10: 00007ffc3b730f30 R11: 0000000000000246 R12: 0000000000000003 [ 2327.236901] R13: 00007ffc3b731340 R14: 00007ffc3b7313d0 R15: 0000000000000084 [ 2327.244865] Object at ffff881be87797e0, in cache kmalloc-64 size: 64 [ 2327.251953] Allocated: [ 2327.254581] PID = 9484 [ 2327.257215] save_stack_trace+0x1b/0x20 [ 2327.261485] save_stack+0x46/0xd0 [ 2327.265179] kasan_kmalloc+0xad/0xe0 [ 2327.269165] kmem_cache_alloc_trace+0xe6/0x1d0 [ 2327.274138] sctp_add_bind_addr+0x58/0x180 [sctp] [ 2327.279400] sctp_do_bind+0x208/0x310 [sctp] [ 2327.284176] sctp_bind+0x61/0xa0 [sctp] [ 2327.288455] inet_bind+0x5f/0x3a0 [ 2327.292151] SYSC_bind+0x1a4/0x1e0 [ 2327.295944] SyS_bind+0xe/0x10 [ 2327.299349] do_syscall_64+0xe3/0x230 [ 2327.303433] return_from_SYSCALL_64+0x0/0x6a [ 2327.308194] Freed: [ 2327.310434] PID = 4131 [ 2327.313065] save_stack_trace+0x1b/0x20 [ 2327.317344] save_stack+0x46/0xd0 [ 2327.321040] kasan_slab_free+0x73/0xc0 [ 2327.325220] kfree+0x96/0x1a0 [ 2327.328530] dynamic_kobj_release+0x15/0x40 [ 2327.333195] kobject_release+0x99/0x1e0 [ 2327.337472] kobject_put+0x38/0x70 [ 2327.341266] free_notes_attrs+0x66/0x80 [ 2327.345545] mod_sysfs_teardown+0x1a5/0x270 [ 2327.350211] free_module+0x20/0x2a0 [ 2327.354099] SyS_delete_module+0x2cb/0x2f0 [ 2327.358667] do_syscall_64+0xe3/0x230 [ 2327.362750] return_from_SYSCALL_64+0x0/0x6a [ 2327.367510] Memory state around the buggy address: [ 2327.372855] ffff881be8779700: fc fc fc fc 00 00 00 00 00 00 00 00 fc fc fc fc [ 2327.380914] ffff881be8779780: fb fb fb fb fb fb fb fb fc fc fc fc 00 00 00 00 [ 2327.388972] >ffff881be8779800: 00 00 00 00 fc fc fc fc fb fb fb fb fb fb fb fb [ 2327.397031] ^ [ 2327.401792] ffff881be8779880: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc [ 2327.409850] ffff881be8779900: 00 00 00 00 00 04 fc fc fc fc fc fc 00 00 00 00 [ 2327.417907] ================================================================== This fixes CVE-2017-7558. References: https://bugzilla.redhat.com/show_bug.cgi?id=1480266 Fixes: 8f840e47 ("sctp: add the sctp_diag.c file") Cc: Xin Long <lucien.xin@gmail.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit a1a50c8e ] Junote Cai reported that he was not able to get a DSA setup involving the Freescale DPAA/FMAN driver to work and narrowed it down to of_find_net_device_by_node(). This function requires the network device's device reference to be correctly set which is the case here, though we have lost any device_node association there. The problem is that dpaa_eth_add_device() allocates a "dpaa-ethernet" platform device, and later on dpaa_eth_probe() is called but SET_NETDEV_DEV() won't be propagating &pdev->dev.of_node properly. Fix this by inherenting both the parent device and the of_node when dpaa_eth_add_device() creates the platform device. Fixes: 39339616 ("fsl/fman: Add FMan MAC driver") Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 33ba43ed ] Currently, iproute2's BPF ELF loader works fine with array of maps when retrieving the fd from a pinned node and doing a selfcheck against the provided map attributes from the object file, but we fail to do the same for hash of maps and thus refuse to get the map from pinned node. Reason is that when allocating hash of maps, fd_htab_map_alloc() will set the value size to sizeof(void *), and any user space map creation requests are forced to set 4 bytes as value size. Thus, selfcheck will complain about exposed 8 bytes on 64 bit archs vs. 4 bytes from object file as value size. Contract is that fdinfo or BPF_MAP_GET_FD_BY_ID returns the value size used to create the map. Fix it by handling it the same way as we do for array of maps, which means that we leave value size at 4 bytes and in the allocation phase round up value size to 8 bytes. alloc_htab_elem() needs an adjustment in order to copy rounded up 8 bytes due to bpf_fd_htab_map_update_elem() calling into htab_map_update_elem() with the pointer of the map pointer as value. Unlike array of maps where we just xchg(), we're using the generic htab_map_update_elem() callback also used from helper calls, which published the key/value already on return, so we need to ensure to memcpy() the right size. Fixes: bcc6b1b7 ("bpf: Add hash of maps support") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit fd6055a8 ] When peeking, if a bad csum is discovered, the skb is unlinked from the queue with __sk_queue_drop_skb and the peek operation restarted. __sk_queue_drop_skb only drops packets that match the queue head. This fails if the skb was found after the head, using SO_PEEK_OFF socket option. This causes an infinite loop. We MUST drop this problematic skb, and we can simply check if skb was already removed by another thread, by looking at skb->next : This pointer is set to NULL by the __skb_unlink() operation, that might have happened only under the spinlock protection. Many thanks to syzkaller team (and particularly Dmitry Vyukov who provided us nice C reproducers exhibiting the lockup) and Willem de Bruijn who provided first version for this patch and a test program. Fixes: 627d2d6b ("udp: enable MSG_PEEK at non-zero offset") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 78362998 ] This helps tools such as wpa_supplicant can start even if the macsec module isn't loaded yet. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Wei Wang authored
[ Upstream commit 4e587ea7 ] Commit c5cff856 adds rcu grace period before freeing fib6_node. This generates a new sparse warning on rt->rt6i_node related code: net/ipv6/route.c:1394:30: error: incompatible types in comparison expression (different address spaces) ./include/net/ip6_fib.h:187:14: error: incompatible types in comparison expression (different address spaces) This commit adds "__rcu" tag for rt6i_node and makes sure corresponding rcu API is used for it. After this fix, sparse no longer generates the above warning. Fixes: c5cff856 ("ipv6: add rcu grace period before freeing fib6_node") Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
-
Wei Wang authored
[ Upstream commit c5cff856 ] We currently keep rt->rt6i_node pointing to the fib6_node for the route. And some functions make use of this pointer to dereference the fib6_node from rt structure, e.g. rt6_check(). However, as there is neither refcount nor rcu taken when dereferencing rt->rt6i_node, it could potentially cause crashes as rt->rt6i_node could be set to NULL by other CPUs when doing a route deletion. This patch introduces an rcu grace period before freeing fib6_node and makes sure the functions that dereference it takes rcu_read_lock(). Note: there is no "Fixes" tag because this bug was there in a very early stage. Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit 3de33e1b ] A packet length of exactly IPV6_MAXPLEN is allowed, we should refuse parsing options only if the size is 64KiB or more. While at it, remove one extra variable and one assignment which were also introduced by the commit that introduced the size check. Checking the sum 'offset + len' and only later adding 'len' to 'offset' doesn't provide any advantage over directly summing to 'offset' and checking it. Fixes: 6399f1fa ("ipv6: avoid overflow of offset in ip6_find_1stfragopt") Signed-off-by:
-
- 13 Sep, 2017 24 commits
-
-
Greg Kroah-Hartman authored
-
Richard Wareing authored
commit b31ff3cd upstream. If using a kernel with CONFIG_XFS_RT=y and we set the RHINHERIT flag on a directory in a filesystem that does not have a realtime device and create a new file in that directory, it gets marked as a real time file. When data is written and a fsync is issued, the filesystem attempts to flush a non-existent rt device during the fsync process. This results in a crash dereferencing a null buftarg pointer in xfs_blkdev_issue_flush(): BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xfs_blkdev_issue_flush+0xd/0x20 ..... Call Trace: xfs_file_fsync+0x188/0x1c0 vfs_fsync_range+0x3b/0xa0 do_fsync+0x3d/0x70 SyS_fsync+0x10/0x20 do_syscall_64+0x4d/0xb0 entry_SYSCALL64_slow_path+0x25/0x25 Setting RT inode flags does not require special privileges so any unprivileged user can cause this oops to occur. To reproduce, confirm kernel is compiled with CONFIG_XFS_RT=y and run: # mkfs.xfs -f /dev/pmem0 # mount /dev/pmem0 /mnt/test # mkdir /mnt/test/foo # xfs_io -c 'chattr +t' /mnt/test/foo # xfs_io -f -c 'pwrite 0 5m' -c fsync /mnt/test/foo/bar Or just run xfstests with MKFS_OPTIONS="-d rtinherit=1" and wait. Kernels built with CONFIG_XFS_RT=n are not exposed to this bug. Fixes: f538d4da ("[XFS] write barrier support") Signed-off-by:
Richard Wareing <rwareing@fb.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Trond Myklebust authored
commit 14abcb0b upstream. There are a number of callers of nfs_pageio_complete() that want to continue using the nfs_pageio_descriptor without needing to call nfs_pageio_init() again. Examples include nfs_pageio_resend() and nfs_pageio_cond_complete(). The problem is that nfs_pageio_complete() also calls nfs_pageio_cleanup_mirroring(), which frees up the array of mirrors. This can lead to writeback errors, in the next call to nfs_pageio_setup_mirroring(). Fix by simply moving the allocation of the mirrors to nfs_pageio_setup_mirroring(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=196709Reported-by:
JianhongYin <yin-jianhong@163.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
tarangg@amazon.com authored
commit e973b1a5 upstream. Since commit 18290650 ("NFS: Move buffered I/O locking into nfs_file_write()") nfs_file_write() has not flushed the correct byte range during synchronous writes. generic_write_sync() expects that iocb->ki_pos points to the right edge of the range rather than the left edge. To replicate the problem, open a file with O_DSYNC, have the client write at increasing offsets, and then print the successful offsets. Block port 2049 partway through that sequence, and observe that the client application indicates successful writes in advance of what the server received. Fixes: 18290650 ("NFS: Move buffered I/O locking into nfs_file_write()") Signed-off-by:
Jacob Strauss <jsstraus@amazon.com> Signed-off-by:
Tarang Gupta <tarangg@amazon.com> Tested-by:
-
Trond Myklebust authored
commit 196639eb upstream. The writeback code wants to send a commit after processing the pages, which is why we want to delay releasing the struct path until after that's done. Also, the layout code expects that we do not free the inode before we've put the layout segments in pnfs_writehdr_free() and pnfs_readhdr_free() Fixes: 919e3bd9 ("NFS: Ensure we commit after writeback is complete") Fixes: 4714fb51 ("nfs: remove pgio_header refcount, related cleanup") Signed-off-by:
-
Mark Rutland authored
commit 746a272e upstream. When there's a fatal signal pending, arm's do_page_fault() implementation returns 0. The intent is that we'll return to the faulting userspace instruction, delivering the signal on the way. However, if we take a fatal signal during fixing up a uaccess, this results in a return to the faulting kernel instruction, which will be instantly retried, resulting in the same fault being taken forever. As the task never reaches userspace, the signal is not delivered, and the task is left unkillable. While the task is stuck in this state, it can inhibit the forward progress of the system. To avoid this, we must ensure that when a fatal signal is pending, we apply any necessary fixup for a faulting kernel instruction. Thus we will return to an error path, and it is up to that code to make forward progress towards delivering the fatal signal. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Reviewed-by:
Steve Capper <steve.capper@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Marc Zyngier authored
commit 95696d29 upstream. The GIC-500 integrated in the Armada-37xx SoCs is compliant with the GICv3 architecture, and thus provides a maintenance interrupt that is required for hypervisors to function correctly. With the interrupt provided in the DT, KVM now works as it should. Tested on an Espressobin system. Fixes: adbc3695 ("arm64: dts: add the Marvell Armada 3700 family and a development board") Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Ben Seri authored
commit e860d2c9 upstream. Validate the output buffer length for L2CAP config requests and responses to avoid overflowing the stack buffer used for building the option blocks. Signed-off-by:
Ben Seri <ben@armis.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Stanislaw Gruszka authored
commit 83ec4891 upstream. Since commit 41977e86 ("rt2x00: add support for MT7620") we do not initialize TX_PIN_CFG setting. This cause breakage at least on some RT3573 devices. To fix the problem patch restores previous behaviour for non MT7620 chips. Fixes: 41977e86 ("rt2x00: add support for MT7620") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1480829Reported-and-tested-by:
Jussi Eloranta <jussi.eloranta@csun.edu> Cc: Daniel Golle <daniel@makrotopia.org> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Brijesh Singh authored
commit 64531a3b upstream. Commit 14727754 ("kvm: svm: Add support for additional SVM NPF error codes", 2016-11-23) added a new error code to aid nested page fault handling. The commit unprotects (kvm_mmu_unprotect_page) the page when we get a NPF due to guest page table walk where the page was marked RO. However, if an L0->L2 shadow nested page table can also be marked read-only when a page is read only in L1's nested page table. If such a page is accessed by L2 while walking page tables it can cause a nested page fault (page table walks are write accesses). However, after kvm_mmu_unprotect_page we may get another page fault, and again in an endless stream. To cover this use case, we qualify the new error_code check with vcpu->arch.mmu_direct_map so that the error_code check would run on L1 guest, and not the L2 guest. This avoids hitting the above scenario. Fixes: 14727754 Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Brijesh Singh <brijesh.singh@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Takashi Iwai authored
commit 20e2b791 upstream. The ISA msnd drivers have loops fetching the ring-buffer head, tail and size values inside the loops. Such codes are inefficient and fragile. This patch optimizes it, and also adds the sanity check to avoid the endless loops. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196131 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196133Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
grygorii tertychnyi <gtertych@cisco.com> Signed-off-by:
-
Laurent Dufour authored
commit de0c799b upstream. Seen while reading the code, in handle_mm_fault(), in the case arch_vma_access_permitted() is failing the call to mem_cgroup_oom_disable() is not made. To fix that, move the call to mem_cgroup_oom_enable() after calling arch_vma_access_permitted() as it should not have entered the memcg OOM. Link: http://lkml.kernel.org/r/1504625439-31313-1-git-send-email-ldufour@linux.vnet.ibm.com Fixes: bae473a4 ("mm: introduce fault_env") Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Acked-by:
Kirill A. Shutemov <kirill@shutemov.name> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
David Rientjes authored
commit b6b1fd2a upstream. Free frontswap_map if an error is encountered before enable_swap_info(). Signed-off-by:
David Rientjes <rientjes@google.com> Reviewed-by:
"Huang, Ying" <ying.huang@intel.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Darrick J. Wong authored
commit 8606a1a9 upstream. If initializing a small swap file fails because the swap file has a problem (holes, etc.) then we need to free the cluster info as part of cleanup. Unfortunately a previous patch changed the code to use kvzalloc but did not change all the vfree calls to use kvfree. Found by running generic/357 from xfstests. Link: http://lkml.kernel.org/r/20170831233515.GR3775@magnolia Fixes: 54f180d3 ("mm, swap: use kvzalloc to allocate some swap data structures") Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
-
Andy Lutomirski authored
commit 23d98c20 upstream. Those are funny cases. Make sure they work. (Something is screwy with signal handling if a selector is 1, 2, or 3. Anyone who wants to dive into that rabbit hole is welcome to do so.) Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chang Seok <chang.seok.bae@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Eric Dumazet authored
commit bc9ae224 upstream. __radix_tree_preload() only disables preemption if no error is returned. So we really need to make sure callers always check the return value. idr_preload() contract is to always disable preemption, so we need to add a missing preempt_disable() if an error happened. Similarly, ida_pre_get() only needs to call preempt_enable() in the case no error happened. Link: http://lkml.kernel.org/r/1504637190.15310.62.camel@edumazet-glaptop3.roam.corp.google.com Fixes: 0a835c4f ("Reimplement IDR and IDA using the radix tree") Fixes: 7ad3d4d8 ("ida: Move ida_bitmap to a percpu variable") Signed-off-by:
-
Larry Finger authored
commit a33fcba6 upstream. In commit bcd37f4a ("rtlwifi: btcoex: 23b 2ant: let bt transmit when hw initialisation done"), there is an additional error when the module parameter ant_sel is used to select the auxilary antenna. The error is that the antenna selection is not checked when writing the antenna selection register. Fixes: bcd37f4a ("rtlwifi: btcoex: 23b 2ant: let bt transmit when hw initialisation done") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
-
Aleksa Sarai authored
commit 6c6b5a39 upstream. Several distributions mount the "proper root" as ro during initrd and then remount it as rw before pivot_root(2). Thus, if a rescan had been aborted by a previous shutdown, the rescan would never be resumed. This issue would manifest itself as several btrfs ioctl(2)s causing the entire machine to hang when btrfs_qgroup_wait_for_completion was hit (due to the fs_info->qgroup_rescan_running flag being set but the rescan itself not being resumed). Notably, Docker's btrfs storage driver makes regular use of BTRFS_QUOTA_CTL_DISABLE and BTRFS_IOC_QUOTA_RESCAN_WAIT (causing this problem to be manifested on boot for some machines). Cc: Jeff Mahoney <jeffm@suse.com> Fixes: b382a324 ("Btrfs: fix qgroup rescan resume on mount") Signed-off-by:
Aleksa Sarai <asarai@suse.de> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Tested-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Daniel Verkamp authored
commit 40a5fce4 upstream. The default host NQN, which is generated based on the host's UUID, does not follow the UUID-based NQN format laid out in the NVMe 1.3 specification. Remove the "NVMf:" portion of the NQN to match the spec. Signed-off-by:
Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Abhishek Sahu authored
commit 10777de5 upstream. The configuration for BCH is not correct in the current driver. The ECC_CFG_ECC_DISABLE bit defines whether to enable or disable the BCH ECC in which 0x1 : BCH_DISABLED 0x0 : BCH_ENABLED But currently host->bch_enabled is being assigned to BCH_DISABLED. Fixes: c76b78d8 ("mtd: nand: Qualcomm NAND controller driver") Signed-off-by:
Abhishek Sahu <absahu@codeaurora.org> Reviewed-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Abhishek Sahu authored
commit d8a9b320 upstream. The NAND page read fails without complete boot chain since NAND_DEV_CMD_VLD value is not proper. The default power on reset value for this register is 0xe - ERASE_START_VALID | WRITE_START_VALID | READ_STOP_VALID The READ_START_VALID should be enabled for sending PAGE_READ command. READ_STOP_VALID should be cleared since normal NAND page read does not require READ_STOP command. Fixes: c76b78d8 ("mtd: nand: Qualcomm NAND controller driver") Reviewed-by:
-
Boris Brezillon authored
commit 3bff08df upstream. Commit a894cf6c ("mtd: nand: mxc: switch to mtd_ooblayout_ops") introduced a bug in the OOB layout description. Even if the driver claims that 3 ECC bytes are reserved to protect 512 bytes of data, it's actually 5 ECC bytes to protect 512+6 bytes of data (some OOB bytes are also protected using extra ECC bytes). Fix the mxc_v1_ooblayout_{free,ecc}() functions to reflect this behavior. Signed-off-by:
-
Martin Blumenstingl authored
commit fd213b5b upstream. According to the datasheet of the H27UCG8T2BTR the NAND Technology field (6th byte of the "Device Identifier Description", bits 0-2) the following values are possible: - 0x0 = 48nm - 0x1 = 41nm - 0x2 = 32nm - 0x3 = 26nm - 0x4 = 20nm - (all others are reserved) Fix this by extending the mask for this field to allow detecting value 0x4 (20nm) as valid NAND technology. Without this the detection of the ECC requirements fails, because the code assumes that the device is a 48nm device (0x4 & 0x3 = 0x0) and aborts with "Invalid ECC requirements" because it cannot map the "ECC Level". Extending the mask makes the ECC requirement detection code recognize this chip as <= 26nm and sets up the ECC step size and ECC strength correctly. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Fixes: 78f3482d ("mtd: nand: hynix: Rework NAND ID decoding to extract more information") Signed-off-by:
-
Lothar Waßmann authored
commit 69fc0129 upstream. commit c51d0ac5 ("mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c") introduced a regression for Samsung SLC NAND chips. Prior to this commit chip->bits_per_cell was initialized by calling nand_get_bits_per_cell() before using nand_is_slc(). With the offending commit this call is skipped, leaving chip->bits_per_cell cleared to zero when the manufacturer specific '.detect' function calls nand_is_slc() which in turn interprets bits_per_cell != 1 as indication for an MLC chip. The effect is that e.g. a K9F1G08U0F NAND chip is falsely detected as MLC NAND with 4KiB page size rather than SLC with 2KiB page size. Add a call to nand_get_bits_per_cell() before calling the .detect hook function in nand_manufacturer_detect(), so that the nand_is_slc() calls in the manufacturer specific code will return correct results. Fixes: c51d0ac5 ("mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c") Signed-off-by:
Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by:
-
- 10 Sep, 2017 1 commit
-
-
Greg Kroah-Hartman authored
-
- 09 Sep, 2017 3 commits
-
-
Sven Joachim authored
commit 1d9b168d upstream. Commit f70e4df2 ("rtlwifi: Add code to read new versions of firmware") added code to load an old firmware file if the new one is not available. Unfortunately that code is never reached because request_firmware_nowait() does not wait for the firmware to show up and returns 0 even if the file is not there. Use the existing fallback mechanism introduced by commit 62009b7f ("rtlwifi: rtl8192cu: Add new firmware") instead. Fixes: f70e4df2 ("rtlwifi: Add code to read new versions of firmware") Signed-off-by:
Sven Joachim <svenjoac@gmx.de> Signed-off-by:
-
Souptick Joarder authored
commit f2764f61 upstream. This patch will fix memory leak when firmware request fails Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Acked-by:
-
Bjorn Andersson authored
commit 08ab58d9 upstream. As of_device_get_modalias() returns the number of bytes that would have been written to the target string, regardless of how much did fit in the buffer, it's possible that the returned index points beyond the buffer passed to of_device_modalias() - causing memory beyond the buffer to be null terminated. Fixes: 0634c295 ("of: Add function for generating a DT modalias with a newline") Cc: Rob Herring <robh@kernel.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
