- 13 Nov, 2015 40 commits
-
-
Roman Gushchin authored
commit b8a9d66d upstream. After commit 566c09c5 ("raid5: relieve lock contention in get_active_stripe()") __find_stripe() is called under conf->hash_locks + hash. But handle_stripe_clean_event() calls remove_hash() under conf->device_lock. Under some cirscumstances the hash chain can be circuited, and we get an infinite loop with disabled interrupts and locked hash lock in __find_stripe(). This leads to hard lockup on multiple CPUs and following system crash. I was able to reproduce this behavior on raid6 over 6 ssd disks. The devices_handle_discard_safely option should be set to enable trim support. The following script was used: for i in `seq 1 32`; do dd if=/dev/zero of=large$i bs=10M count=100 & done Signed-off-by:
Roman Gushchin <klamm@yandex-team.ru> Fixes: 566c09c5 ("raid5: relieve lock contention in get_active_stripe()") Signed-off-by:
NeilBrown <neilb@suse.com> Cc: Shaohua Li <shli@kernel.org> [ luis: backported to 3.16: used Roman's backport to 3.14 ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Ronny Hegewald authored
commit bae818ee upstream. rbd requires stable pages, as it performs a crc of the page data before they are send to the OSDs. But since kernel 3.9 (patch 1d1d1a76 "mm: only enforce stable page writes if the backing device requires it") it is not assumed anymore that block devices require stable pages. This patch sets the necessary flag to get stable pages back for rbd. In a ceph installation that provides multiple ext4 formatted rbd devices "bad crc" messages appeared regularly (ca 1 message every 1-2 minutes on every OSD that provided the data for the rbd) in the OSD-logs before this patch. After this patch this messages are pretty much gone (only ca 1-2 / month / OSD). Signed-off-by:
Ronny Hegewald <Ronny.Hegewald@online.de> [idryomov@gmail.com: require stable pages only in crc case, changelog] Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> [idryomov@gmail.com: backport to 3.9-3.17: context] Signed-off-by:
-
Will Deacon authored
commit 9702970c upstream. This reverts commit e306dfd0. With this patch applied, we were the only architecture making this sort of adjustment to the PC calculation in the unwinder. This causes problems for ftrace, where the PC values are matched against the contents of the stack frames in the callchain and fail to match any records after the address adjustment. Whilst there has been some effort to change ftrace to workaround this, those patches are not yet ready for mainline and, since we're the odd architecture in this regard, let's just step in line with other architectures (like arch/arm/) for now. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Will Deacon authored
commit 589cb22b upstream. If the STXR instruction fails in the SWP emulation code, we leave *data overwritten with the loaded value, therefore corrupting the data written by a subsequent, successful attempt. This patch re-jigs the code so that we only write back to *data once we know that the update has happened. Fixes: bd35a4ad ("arm64: Port SWP/SWPB emulation support from arm") Reported-by:
Shengjiu Wang <shengjiu.wang@freescale.com> Reported-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
-
Dāvis Mosāns authored
commit 22805217 upstream. When pci_pool_alloc fails in mvs_task_prep then task->lldd_task stays NULL but it's later used in mvs_abort_task as slot which is passed to mvs_slot_task_free causing NULL pointer dereference. Just return from mvs_slot_task_free when passed with NULL slot. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101891Signed-off-by:
Dāvis Mosāns <davispuh@gmail.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Alex Deucher authored
commit 49abb266 upstream. Fixes a harmless error message caused by: 51a4726bSigned-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Hezi Shahmoon authored
commit 0729a049 upstream. Commit 00d8689b ("i2c: mv64xxx: rework offload support to fix several problems") completely reworked the offload support, but left a debugging-related "return false" at the beginning of the mv64xxx_i2c_can_offload() function. This has the unfortunate consequence that offloading is in fact never used, which wasn't really the intention. This commit fixes that problem by removing the bogus "return false". Fixes: 00d8689b ("i2c: mv64xxx: rework offload support to fix several problems") Signed-off-by:
Hezi Shahmoon <hezi@marvell.com> [Thomas: reworked commit log and title.] Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Joerg Roedel authored
commit cbf3ccd0 upstream. During device assignment/deassignment the flags in the DTE get lost, which might cause spurious faults, for example when the device tries to access the system management range. Fix this by not clearing the flags with the rest of the DTE. Reported-by:
G. Richard Bellamy <rbellamy@pteradigm.com> Tested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Jes Sorensen authored
commit 681ab469 upstream. This was introduced with 9e882242 which changed the return value of submit_bio_wait() to return != 0 on error, but didn't update the caller accordingly. Fixes: 9e882242 ("block: Add submit_bio_wait(), remove from md") Reported-by:
Bill Kuzeja <William.Kuzeja@stratus.com> Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
-
Jes Sorensen authored
commit 203d27b0 upstream. This was introduced with 9e882242 which changed the return value of submit_bio_wait() to return != 0 on error, but didn't update the caller accordingly. Fixes: 9e882242 ("block: Add submit_bio_wait(), remove from md") Reported-by:
-
Herbert Xu authored
commit 3fc89adb upstream. Currently a number of Crypto API operations may fail when a signal occurs. This causes nasty problems as the caller of those operations are often not in a good position to restart the operation. In fact there is currently no need for those operations to be interrupted by user signals at all. All we need is for them to be killable. This patch replaces the relevant calls of signal_pending with fatal_signal_pending, and wait_for_completion_interruptible with wait_for_completion_killable, respectively. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David Howells authored
commit ab79efab upstream. In ovl_copy_up_locked(), newdentry is leaked if the function exits through out_cleanup as this just to out after calling ovl_cleanup() - which doesn't actually release the ref on newdentry. The out_cleanup segment should instead exit through out2 as certainly newdentry leaks - and possibly upper does also, though this isn't caught given the catch of newdentry. Without this fix, something like the following is seen: BUG: Dentry ffff880023e9eb20{i=f861,n=#ffff880023e82d90} still in use (1) [unmount of tmpfs tmpfs] BUG: Dentry ffff880023ece640{i=0,n=bigfile} still in use (1) [unmount of tmpfs tmpfs] when unmounting the upper layer after an error occurred in copyup. An error can be induced by creating a big file in a lower layer with something like: dd if=/dev/zero of=/lower/a/bigfile bs=65536 count=1 seek=$((0xf000)) to create a large file (4.1G). Overlay an upper layer that is too small (on tmpfs might do) and then induce a copy up by opening it writably. Reported-by:
Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
David Howells authored
commit 0480334f upstream. Open the lower file with O_LARGEFILE in ovl_copy_up(). Pass O_LARGEFILE unconditionally in ovl_copy_up_data() as it's purely for catching 32-bit userspace dealing with a file large enough that it'll be mishandled if the application isn't aware that there might be an integer overflow. Inside the kernel, there shouldn't be any problems. Reported-by:
-
Sasha Levin authored
commit 12669631 upstream. 63692df1 ("PCI: Allow numa_node override via sysfs") didn't check that the numa node provided by userspace is valid. Passing a node number too high would attempt to access invalid memory and trigger a kernel panic. Fixes: 63692df1 ("PCI: Allow numa_node override via sysfs") Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Peter Zijlstra authored
commit 275d7d44 upstream. Poma (on the way to another bug) reported an assertion triggering: [<ffffffff81150529>] module_assert_mutex_or_preempt+0x49/0x90 [<ffffffff81150822>] __module_address+0x32/0x150 [<ffffffff81150956>] __module_text_address+0x16/0x70 [<ffffffff81150f19>] symbol_put_addr+0x29/0x40 [<ffffffffa04b77ad>] dvb_frontend_detach+0x7d/0x90 [dvb_core] Laura Abbott <labbott@redhat.com> produced a patch which lead us to inspect symbol_put_addr(). This function has a comment claiming it doesn't need to disable preemption around the module lookup because it holds a reference to the module it wants to find, which therefore cannot go away. This is wrong (and a false optimization too, preempt_disable() is really rather cheap, and I doubt any of this is on uber critical paths, otherwise it would've retained a pointer to the actual module anyway and avoided the second lookup). While its true that the module cannot go away while we hold a reference on it, the data structure we do the lookup in very much _CAN_ change while we do the lookup. Therefore fix the comment and add the required preempt_disable(). Reported-by:
poma <pomidorabelisima@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Fixes: a6e6abd5 ("module: remove module_text_address()") Signed-off-by:
-
Doron Tsur authored
commit 0ca81a28 upstream. ib_send_cm_sidr_rep could sometimes erase the node from the sidr (depending on errors in the process). Since ib_send_cm_sidr_rep is called both from cm_sidr_req_handler and cm_destroy_id, cm_id_priv could be either erased from the rb_tree twice or not erased at all. Fixing that by making sure it's erased only once before freeing cm_id_priv. Fixes: a977049d ('[PATCH] IB: Add the kernel CM implementation') Signed-off-by:
Doron Tsur <doront@mellanox.com> Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Tomi Valkeinen authored
commit 7e381ec6 upstream. LDO1 regulator (VDD_SD) is connected to SoC's vddshv8. vddshv8 needs to be kept always powered (see commit 5a0f93c6 ("ARM: dts: Add am57xx-beagle-x15"), but at the moment VDD_SD is enabled/disabled depending on whether an SD card is inserted or not. This patch sets LDO1 regulator to always-on. This patch has a side effect of fixing another issue, HDMI DDC not working when SD card is not inserted: Why this happens is that the tpd12s015 (HDMI level shifter/ESD protection chip) has LS_OE GPIO input, which needs to be enabled for the HDMI DDC to work. LS_OE comes from gpio6_28. The pin that provides gpio6_28 is powered by vddshv8, and vddshv8 comes from VDD_SD. So when SD card is not inserted, VDD_SD is disabled, and LS_OE stays off. The proper fix for the HDMI DDC issue would be to maybe have the pinctrl framework manage the pin specific power. Apparently this fixes also a third issue (copy paste from Kishon's patch): ldo1_reg in addition to being connected to the io lines is also connected to the card detect line. On card removal, omap_hsmmc driver does a regulator_disable causing card detect line to be pulled down. This raises a card insertion interrupt and once the MMC core detects there is no card inserted, it does a regulator disable which again raises a card insertion interrupt. This happens in a loop causing infinite MMC interrupts. Fixes: 5a0f93c6 ("ARM: dts: Add am57xx-beagle-x15") Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by:
Louis McCarthy <compeoree@gmail.com> Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Daniel Borkmann authored
commit 93d08b69 upstream. When sockets have a native eBPF program attached through setsockopt(sk, SOL_SOCKET, SO_ATTACH_BPF, ...), and then try to dump these over getsockopt(sk, SOL_SOCKET, SO_GET_FILTER, ...), the following panic appears: [49904.178642] BUG: unable to handle kernel NULL pointer dereference at (null) [49904.178762] IP: [<ffffffff81610fd9>] sk_get_filter+0x39/0x90 [49904.182000] PGD 86fc9067 PUD 531a1067 PMD 0 [49904.185196] Oops: 0000 [#1] SMP [...] [49904.224677] Call Trace: [49904.226090] [<ffffffff815e3d49>] sock_getsockopt+0x319/0x740 [49904.227535] [<ffffffff812f59e3>] ? sock_has_perm+0x63/0x70 [49904.228953] [<ffffffff815e2fc8>] ? release_sock+0x108/0x150 [49904.230380] [<ffffffff812f5a43>] ? selinux_socket_getsockopt+0x23/0x30 [49904.231788] [<ffffffff815dff36>] SyS_getsockopt+0xa6/0xc0 [49904.233267] [<ffffffff8171b9ae>] entry_SYSCALL_64_fastpath+0x12/0x71 The underlying issue is the very same as in commit b382c086 ("sock, diag: fix panic in sock_diag_put_filterinfo"), that is, native eBPF programs don't store an original program since this is only needed in cBPF ones. However, sk_get_filter() wasn't updated to test for this at the time when eBPF could be attached. Just throw an error to the user to indicate that eBPF cannot be dumped over this interface. That way, it can also be known that a program _is_ attached (as opposed to just return 0), and a different (future) method needs to be consulted for a dump. Fixes: 89aa0758 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mike Snitzer authored
commit 4dcb8b57 upstream. btree_split_beneath()'s error path had an outstanding FIXME that speaks directly to the potential for _not_ cleaning up a previously allocated bufio-backed block. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Acked-by:
Joe Thornber <thornber@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 2871c69e upstream. Commit 4c7e3093 ("dm btree remove: fix bug in redistribute3") wasn't a complete fix for redistribute3(). The redistribute3 function takes 3 btree nodes and shares out the entries evenly between them. If the three nodes in total contained (MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in the center. Fix this issue by being more careful about calculating the target number of entries for the left and right nodes. Unit tested in userspace using this program: https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.cSigned-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit 6d69bb53 upstream. Mapping an image with a long parent chain (e.g. image foo, whose parent is bar, whose parent is baz, etc) currently leads to a kernel stack overflow, due to the following recursion in the reply path: rbd_osd_req_callback() rbd_obj_request_complete() rbd_img_obj_callback() rbd_img_parent_read_callback() rbd_obj_request_complete() ... Limit the parent chain to 16 images, which is ~5K worth of stack. When the above recursion is eliminated, this limit can be lifted. Fixes: http://tracker.ceph.com/issues/12538Signed-off-by:
Josh Durgin <jdurgin@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit 1f2c6651 upstream. Currently we leak parent_spec and trigger a "parent reference underflow" warning if rbd_dev_create() in rbd_dev_probe_parent() fails. The problem is we take the !parent out_err branch and that only drops refcounts; parent_spec that would've been freed had we called rbd_dev_unparent() remains and triggers rbd_warn() in rbd_dev_parent_put() - at that point we have parent_spec != NULL and parent_ref == 0, so counter ends up being -1 after the decrement. Redo rbd_dev_probe_parent() to fix this. Signed-off-by:
Alex Elder <elder@linaro.org> [idryomov@gmail.com: backport to < 4.2: rbd_dev->opts] Signed-off-by:
-
Ilya Dryomov authored
commit 3ebe138a upstream. If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name is freed twice: once in rbd_dev_probe_parent() and then in its caller rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to handle parent images). rbd_dev_probe_parent() is responsible for probing the parent, so it shouldn't muck with clone's fields. Signed-off-by:
-
Florian Westphal authored
commit bb387002 upstream. interval displays the probability and vice versa. Fixes: 6adc4a22 ("fault-inject: add ratelimit option") Acked-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jan Kara authored
commit 296291cd upstream. Currently a simple program below issues a sendfile(2) system call which takes about 62 days to complete in my test KVM instance. int fd; off_t off = 0; fd = open("file", O_RDWR | O_TRUNC | O_SYNC | O_CREAT, 0644); ftruncate(fd, 2); lseek(fd, 0, SEEK_END); sendfile(fd, fd, &off, 0xfffffff); Now you should not ask kernel to do a stupid stuff like copying 256MB in 2-byte chunks and call fsync(2) after each chunk but if you do, sysadmin should have a way to stop you. We actually do have a check for fatal_signal_pending() in generic_perform_write() which triggers in this path however because we always succeed in writing something before the check is done, we return value > 0 from generic_perform_write() and thus the information about signal gets lost. Fix the problem by doing the signal check before writing anything. That way generic_perform_write() returns -EINTR, the error gets propagated up and the sendfile loop terminates early. Signed-off-by:
Jan Kara <jack@suse.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Laura Abbott authored
commit 47810b43 upstream. When reading the firmware and sending commands, the length must be bounds checked to avoid overrunning the size of the command buffer and smashing the stack if the firmware is not in the expected format: si2168 11-0064: found a 'Silicon Labs Si2168-B40' si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' si2168 11-0064: firmware download failed -95 Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa085708f Add the proper check. Reported-by:
Stuart Auchterlonie <sauchter@redhat.com> Reviewed-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Vasant Hegde authored
commit 8832317f upstream. Currently we do not validate rtas.entry before calling enter_rtas(). This leads to a kernel oops when user space calls rtas system call on a powernv platform (see below). This patch adds code to validate rtas.entry before making enter_rtas() call. Oops: Exception in kernel mode, sig: 4 [#1] SMP NR_CPUS=1024 NUMA PowerNV task: c000000004294b80 ti: c0000007e1a78000 task.ti: c0000007e1a78000 NIP: 0000000000000000 LR: 0000000000009c14 CTR: c000000000423140 REGS: c0000007e1a7b920 TRAP: 0e40 Not tainted (3.18.17-340.el7_1.pkvm3_1_0.2400.1.ppc64le) MSR: 1000000000081000 <HV,ME> CR: 00000000 XER: 00000000 CFAR: c000000000009c0c SOFTE: 0 NIP [0000000000000000] (null) LR [0000000000009c14] 0x9c14 Call Trace: [c0000007e1a7bba0] [c00000000041a7f4] avc_has_perm_noaudit+0x54/0x110 (unreliable) [c0000007e1a7bd80] [c00000000002ddc0] ppc_rtas+0x150/0x2d0 [c0000007e1a7be30] [c000000000009358] syscall_exit+0x0/0x98 Fixes: 55190f88 ("powerpc: Add skeleton PowerNV platform") Reported-by:
NAGESWARA R. SASTRY <nasastry@in.ibm.com> Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Reword change log, trim oops, and add stable + fixes] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ilia Mirkin authored
commit 2a6c521b upstream. On nv50+, we restrict the valid domains to just the one where the buffer was originally created. However after the buffer is evicted to system memory, we might move it back to a different domain that was not originally valid. When sharing the buffer and retrieving its GEM_INFO data, we still want the domain that will be valid for this buffer in a pushbuf, not the one where it currently happens to be. This resolves fdo#92504 and several others. These are due to suspend evicting all buffers, making it more likely that they temporarily end up in the wrong place. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92504Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Adam Richter authored
commit 30730c7f upstream. In Linux 4.3-rc5, there is an error case in drm_dp_get_branch_device that returns without releasing mgr->lock, resulting a spew of kernel messages about a kernel work function possibly having leaked a mutex and presumably more serious adverse consequences later. This patch changes the error to "goto out" to unlock the mutex before returning. [airlied: grabbed from drm-next as it fixes something we've seen] Signed-off-by:
Adam J. Richter <adam_richter2004@yahoo.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Charles Keepax authored
commit 97aff2c0 upstream. There are 24 EQ registers not 25, I suspect this bug came about because the registers start at EQ1 not zero. The bug is relatively harmless as the extra register written is an unused one. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Laura Abbott authored
commit fd7cd061 upstream. We received several reports of systems rebooting and powering on after an attempted shutdown. Testing showed that setting XHCI_SPURIOUS_WAKEUP quirk in addition to the XHCI_SPURIOUS_REBOOT quirk allowed the system to shutdown as expected for LynxPoint-LP xHCI controllers. Set the quirk back. Note that the quirk was originally introduced for LynxPoint and LynxPoint-LP just for this same reason. See: commit 638298dc ("xhci: Fix spurious wakeups after S5 on Haswell") It was later limited to only concern HP machines as it caused regression on some machines, see both bug and commit: Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66171 commit 6962d914 ("xhci: Limit the spurious wakeup fix only to HP machines") Later it was discovered that the powering on after shutdown was limited to LynxPoint-LP (Haswell-ULT) and that some non-LP HP machine suffered from spontaneous resume from S3 (which should not be related to the SPURIOUS_WAKEUP quirk at all). An attempt to fix this then removed the SPURIOUS_WAKEUP flag usage completely. commit b45abacd ("xhci: no switching back on non-ULT Haswell") Current understanding is that LynxPoint-LP (Haswell ULT) machines need the SPURIOUS_WAKEUP quirk, otherwise they will restart, and plain Lynxpoint (Haswell) machines may _not_ have the quirk set otherwise they again will restart. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mathias Nyman authored
commit 3b4739b8 upstream. If a host fails to wake up a isochronous SuperSpeed device from U1/U2 in time for a isoch transfer it will generate a "No ping response error" Host will then move to the next transfer descriptor. Handle this case in the same way as missed service errors, tag the current TD as skipped and handle it on the next transfer event. Signed-off-by:
-
Mathias Nyman authored
commit e210c422 upstream. If the difference is big enough between the bytes asked and received in a bulk transfer we can get a short transfer event pointing to a TRB in the middle of the TD. We don't want to handle the TD yet as we will anyway receive a new event for the last TRB in the TD. Hold off from finishing the TD and removing it from the list until we receive an event for the last TRB in the TD Signed-off-by:
-
Charles Keepax authored
commit 34198710 upstream. SX_TLV controls are intended for situations where the register behind the control has some non-zero value indicating the minimum gain and then gains increasing from there and eventually overflowing through zero. Currently every CODEC implementing these controls specifies the minimum as the non-zero value for the minimum and the maximum as the number of gain settings available. This means when the info callback subtracts the minimum value from the maximum value to calculate the number of gain levels available it is actually under reporting the available levels. This patch fixes this issue by adding a new snd_soc_info_volsw_sx callback that does not subtract the minimum value. Fixes: 1d99f243 ("ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLV") Signed-off-by:
Brian Austin <brian.austin@cirrus.com> Tested-by:
-
Kővágó, Zoltán authored
commit 8a53554e upstream. When multiple GOP devices exists, but none of them implements ConOut, the code should just choose the first GOP (according to the comments). But currently 'fb_base' will refer to the last GOP, while other parameters to the first GOP, which will likely result in a garbled display. I can reliably reproduce this bug using my ASRock Z87M Extreme4 motherboard with CSM and integrated GPU disabled, and two PCIe video cards (NVidia GT640 and GTX980), booting from efi-stub (booting from grub works fine). On the primary display the ASRock logo remains and on the secondary screen it is garbled up completely. Signed-off-by:
Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1444659236-24837-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Christian Zander authored
commit ba2374fd upstream. In preparation for the installation of a large page, any small page tables that may still exist in the target IOV address range are removed. However, if a scatter/gather list entry is large enough to fit more than one large page, the address space for any subsequent large pages is not cleared of conflicting small page tables. This can cause legitimate mapping requests to fail with errors of the form below, potentially followed by a series of IOMMU faults: ERROR: DMA PTE for vPFN 0xfde00 already set (to 7f83a4003 not 7e9e00083) In this example, a 4MiB scatter/gather list entry resulted in the successful installation of a large page @ vPFN 0xfdc00, followed by a failed attempt to install another large page @ vPFN 0xfde00, due to the presence of a pointer to a small page table @ 0x7f83a4000. To address this problem, compute the number of large pages that fit into a given scatter/gather list entry, and use it to derive the last vPFN covered by the large page(s). Signed-off-by:
Christian Zander <christian@nervanasys.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Chris Wilson authored
commit cc917ab4 upstream. Pinning a userptr onto the hardware raises interesting questions about the lifetime of such a surface as the framebuffer extends that life beyond the client's address space. That is the hardware will need to keep scanning out from the backing storage even after the client wants to remap its address space. As the hardware pins the backing storage, the userptr becomes invalid and this raises a WARN when the clients tries to unmap its address space. The situation can be even more complicated when the buffer is passed between processes, between a client and display server, where the lifetime and hardware access is even more confusing. Deny it. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit 8e7a65aa upstream. We accidentally lost the initial DPLL register write in 1c4e0274 drm/i915: Fix DVO 2x clock enable on 830M The "three times for luck" hack probably saved us from a total disaster. But anyway, bring the initial write back so that the code actually makes some sense. Reported-and-tested-by:
Nick Bowler <nbowler@draconx.ca> References: http://mid.gmane.org/CAN_QmVyMaArxYgEcVVsGvsMo7-6ohZr8HmF5VhkkL4i9KOmrhw@mail.gmail.com Cc: Nick Bowler <nbowler@draconx.ca> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
commit 40a24488 upstream. In order to flush the results from in-batch pipecontrol writes (used for example in glQuery) before declaring the batch complete (and so declaring the query results coherent), we need to set the FlushEnable bit in our flushing pipecontrol. The FlushEnable bit "waits until all previous writes of immediate data from post-sync circles are complete before executing the next command". I get GPU hangs on byt without flushing these writes (running ue4). piglit has examples where the flush is required for correct rendering. Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
David Henningsson authored
commit e8d65a8d upstream. Add the appropriate quirk to indicate the Lenovo G50-80 has a stereo mic input where one channel has reverse polarity. Alsa-info available at: https://launchpadlibrarian.net/220846272/AlsaInfo.txt BugLink: https://bugs.launchpad.net/bugs/1504778Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
