- 13 May, 2013 40 commits
-
-
Thomas Gleixner authored
commit 6f7a05d7 upstream. Vitaliy reported that a per cpu HPET timer interrupt crashes the system during hibernation. What happens is that the per cpu HPET timer gets shut down when the nonboot cpus are stopped. When the nonboot cpus are onlined again the HPET code sets up the MSI interrupt which fires before the clock event device is registered. The event handler is still set to hrtimer_interrupt, which then crashes the machine due to highres mode not being active. See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=700333 There is no real good way to avoid that in the HPET code. The HPET code alrady has a mechanism to detect spurious interrupts when event handler == NULL for a similar reason. We can handle that in the clockevent/tick layer and replace the previous functional handler with a dummy handler like we do in tick_setup_new_device(). The original clockevents code did this in clockevents_exchange_device(), but that got removed by commit 7c1e7689 (clockevents: prevent clockevent event_handler ending up handler_noop) which forgot to fix it up in tick_shutdown(). Same issue with the broadcast device. Reported-by:
Vitaliy Fillipov <vitalif@yourcmc.ru> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: 700333@bugs.debian.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Takashi Iwai authored
commit 60af3d03 upstream. We've got strange errors in get_ctl_value() in mixer.c during probing, e.g. on Hercules RMX2 DJ Controller: ALSA mixer.c:352 cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xa00, type = 4 ALSA mixer.c:352 cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xa00, type = 4 .... It turned out that the culprit is autopm: snd_usb_autoresume() returns -ENODEV when called during card->probing = 1. Since the call itself during card->probing = 1 is valid, let's fix the return value of snd_usb_autoresume() as success. Reported-and-tested-by:
Daniel Schürmann <daschuer@mixxx.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Richard Cochran authored
commit cd4baaaa upstream. An early draft of the PHC patch series included an alarm in the gianfar driver. During the review process, the alarm code was dropped, but the capability removal was overlooked. This patch fixes the issue by advertising zero alarms. This patch should be applied to every 3.x stable kernel. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Reported-by:
Chris LaRocque <clarocq@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Daniel Mack authored
commit ebfc594c upstream. The USB_DT_CS_ENDPOINT class-specific endpoint descriptor is usually stuffed directly after the standard USB endpoint descriptor, and this is where the driver currently expects it to be. There are, however, devices in the wild that have it the other way around in their descriptor sets, so the USB_DT_CS_ENDPOINT comes *before* the standard enpoint. Devices known to implement it that way are "Sennheiser BTD-500" and Plantronics USB headsets. When the driver can't find the USB_DT_CS_ENDPOINT, it won't be able to change sample rates, as the bitmask for the validity of this command is storen in bmAttributes of that descriptor. Fix this by searching the entire interface instead of just the extra bytes of the first endpoint, in case the latter fails. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-and-tested-by:
Torstein Hegge <hegge@resisty.net> Reported-and-tested-by:
Yves G <alsa-user@vivigatt.com> Signed-off-by:
-
Adrian Thomasset authored
commit 71d9a2b9 upstream. The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports. The first two ports are reserved for the JTAG interface. We enable by default ports 2 and 3 as UARTs (where port 2 is a conventional RS-232 UART) Signed-off-by:
Adrian Thomasset <adrian.thomasset@st.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Michael Ellerman authored
commit 6747e832 upstream. In commit 85fe4025 (fs: do not assign default i_ino in new_inode), the initialisation of i_ino was removed from new_inode() and pushed down into the callers. However spufs_new_inode() was not updated. This exhibits as no files appearing in /spu, because all our dirents have a zero inode, which readdir() seems to dislike. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Mika Kuoppala authored
commit e6637d54 upstream. commit ae128786 Author: Dave Airlie <airlied@redhat.com> Date: Thu Jan 24 16:12:41 2013 +1000 fbcon: don't lose the console font across generic->chip driver switch uses a pointer in vc->vc_font.data to load font into the new driver. However if the font is actually freed, we need to clear the data so that we don't reload font from dangling pointer. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=892340Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Bryan Schumaker authored
commit bf8d9097 upstream. The seconds field of an nfstime4 structure is 64bit, but we are assuming that the first 32bits are zero-filled. So if the client tries to set atime to a value before the epoch (touch -t 196001010101), then the server will save the wrong value on disk. Signed-off-by:
Bryan Schumaker <bjschuma@netapp.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Steven A. Falco authored
commit c39e8e43 upstream. The TX_FIFO register is 10 bits wide. The lower 8 bits are the data to be written, while the upper two bits are flags to indicate stop/start. The driver apparently attempted to optimize write access, by only writing a byte in those cases where the stop/start bits are zero. However, we have seen cases where the lower byte is duplicated onto the upper byte by the hardware, which causes inadvertent stop/starts. This patch changes the write access to the transmit FIFO to always be 16 bits wide. Signed off by: Steven A. Falco <sfalco@harris.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Tormod Volden authored
commit 671b4b2b upstream. Many cards based on CY7C68300A/B/C use the USB ID 04b4:6830 but only the B and C variants (EZ-USB AT2LP) support the ATA Command Block functionality, according to the data sheets. The A variant (EZ-USB AT2) locks up if ATACB is attempted, until a typical 30 seconds timeout runs out and a USB reset is performed. https://bugs.launchpad.net/bugs/428469 It seems that one way to spot a CY7C68300A (at least where the card manufacturer left Cypress' EEPROM default vaules, against Cypress' recommendations) is to look at the USB string descriptor indices. A http://media.digikey.com/pdf/Data%20Sheets/Cypress%20PDFs/CY7C68300A.pdf B http://www.farnell.com/datasheets/43456.pdf C http://www.cypress.com/?rID=14189 Note that a CY7C68300B/C chip appears as CY7C68300A if it is running in Backward Compatibility Mode, and if ATACB would be supported in this case there is anyway no way to tell which chip it really is. For 5 years my external USB drive has been locking up for half a minute when plugged in and ata_id is run by udev, or anytime hdparm or similar is run on it. Finally looking at the /correct/ datasheet I think I found the reason. I am aware the quirk in this patch is a bit hacky, but the hardware manufacturers haven't made it easy for us. Signed-off-by:
Tormod Volden <debian.tormod@gmail.com> Signed-off-by:
-
Filippo Turato authored
commit d19bf5ce upstream. This adds PID for Olivetti Olicard 145 in option.c Signed-off-by:
Filippo Turato <nnj7585@gmail.com> Signed-off-by:
-
Adrian Thomasset authored
commit 9f06d15f upstream. The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB UART FTDI chip. It is also possible to drive STM reference targets populated with an on-board JTAG debugger based on the FT2232H chip with the same STMicroelectronics tools. For this reason, the ST Micro Connect Lite PIDs should be ST_STMCLT_2232_PID: 0x3746 ST_STMCLT_4232_PID: 0x3747 Signed-off-by:
-
Alex Deucher authored
commit dcb85290 upstream. These chips were previously skipped since they are pre-R600. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Theodore Ts'o authored
commit 7f3e3c7c upstream. Fox the Kconfig documentation for CONFIG_EXT4_DEBUG to match the change made by commit a0b30c12: ext4: use module parameters instead of debugfs for mballoc_debug Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Trond Myklebust authored
commit 1dfd89af upstream. After a server reboot, the reclaimer thread will recover all the existing locks. For locks that are blocked, however, it will change the value of block->b_status to nlm_lck_denied_grace_period in order to signal that they need to wake up and resend the original blocking lock request. Due to a bug, however, the block->b_status never gets reset after the blocked locks have been woken up, and so the process goes into an infinite loop of resends until the blocked lock is satisfied. Reported-by:
Marc Eshel <eshel@us.ibm.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
David Müller (ELSOFT AG) authored
commit e4bfff54 upstream. As discussed in this thread http://lists.freedesktop.org/archives/dri-devel/2013-April/037411.html GMBUS based DVO transmitter detection seems to be unreliable which could result in an unusable DVO port. The attached patch fixes this by falling back to bit banging mode for the time DVO transmitter detection is in progress. Signed-off-by:
David Müller <d.mueller@elsoft.ch> Tested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Emmanuel Grumbach authored
commit 63b77bf4 upstream. When the stations are being restored because of unassoc RXON, the LQ cmd may not have been initialized because it is initialized only after association. Sending zeroed LQ_CMD makes the fw unhappy: it raises SYSASSERT_2078. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by:
Johannes Berg <johannes.berg@intel.com> [move zero_lq and make static const] Signed-off-by:
-
Jani Nikula authored
commit dc652f90 upstream. Backlight cleanup in the eDP connector destroy callback caused the backlight device to be removed on some systems that first initialized LVDS and then attempted to initialize eDP. Prevent multiple backlight initializations, and ensure backlight cleanup is only done once by moving it to modeset cleanup. A small wrinkle is the introduced asymmetry in backlight setup/cleanup. This could be solved by adding refcounting, but it seems overkill considering that there should only ever be one backlight device. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55701Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Tested-by:
Peter Verthez <peter.verthez@skynet.be> Signed-off-by:
-
Chris Wilson authored
commit 25ff1195 upstream. In order to fully serialize access to the fenced region and the update to the fence register we need to take extreme measures on SNB+, and manually flush writes to memory prior to writing the fence register in conjunction with the memory barriers placed around the register write. Fixes i-g-t/gem_fence_thrash v2: Bring a bigger gun v3: Switch the bigger gun for heavier bullets (Arjan van de Ven) v4: Remove changes for working generations. v5: Reduce to a per-cpu wbinvd() call prior to updating the fences. v6: Rewrite comments to ellide forgotten history. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62191Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Tested-by: Jon Bloomfield <jon.bloomfield@intel.com> (v2) Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Hans de Goede authored
commit 1361bf4b upstream. When usbfs receives a ctrl-request from userspace it calls check_ctrlrecip, which for a request with USB_RECIP_ENDPOINT tries to map this to an interface to see if this interface is claimed, except for ctrl-requests with a type of USB_TYPE_VENDOR. When trying to use this device: http://www.akaipro.com/eiepro redirected to a Windows vm running on qemu on top of Linux. The windows driver makes a ctrl-req with USB_TYPE_CLASS and USB_RECIP_ENDPOINT with index 0, and the mapping of the endpoint (0) to the interface fails since ep 0 is the ctrl endpoint and thus never is part of an interface. This patch fixes this ctrl-req failing by skipping the checkintf call for USB_RECIP_ENDPOINT ctrl-reqs on the ctrl endpoint. Reported-by:
Dave Stikkolorum <d.r.stikkolorum@hhs.nl> Tested-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Dylan Reid authored
commit 98682063 upstream. The hardware revision of the codec is based at 0x40. Subtract that before convering to ASCII. The same as it is done for 98095. Signed-off-by:
Dylan Reid <dgreid@chromium.org> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 7918c92a upstream. When we online the CPU, we get this splat: smpboot: Booting Node 0 Processor 1 APIC 0x2 installing Xen timer for CPU 1 BUG: sleeping function called from invalid context at /home/konrad/ssd/konrad/linux/mm/slab.c:3179 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/1 Pid: 0, comm: swapper/1 Not tainted 3.9.0-rc6upstream-00001-g3884fad #1 Call Trace: [<ffffffff810c1fea>] __might_sleep+0xda/0x100 [<ffffffff81194617>] __kmalloc_track_caller+0x1e7/0x2c0 [<ffffffff81303758>] ? kasprintf+0x38/0x40 [<ffffffff813036eb>] kvasprintf+0x5b/0x90 [<ffffffff81303758>] kasprintf+0x38/0x40 [<ffffffff81044510>] xen_setup_timer+0x30/0xb0 [<ffffffff810445af>] xen_hvm_setup_cpu_clockevents+0x1f/0x30 [<ffffffff81666d0a>] start_secondary+0x19c/0x1a8 The solution to that is use kasprintf in the CPU hotplug path that 'online's the CPU. That is, do it in in xen_hvm_cpu_notify, and remove the call to in xen_hvm_setup_cpu_clockevents. Unfortunatly the later is not a good idea as the bootup path does not use xen_hvm_cpu_notify so we would end up never allocating timer%d interrupt lines when booting. As such add the check for atomic() to continue. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 66ff0fe9 upstream. While we don't use the spinlock interrupt line (see for details commit f10cd522 - xen: disable PV spinlocks on HVM) - we should still do the proper init / deinit sequence. We did not do that correctly and for the CPU init for PVHVM guest we would allocate an interrupt line - but failed to deallocate the old interrupt line. This resulted in leakage of an irq_desc but more importantly this splat as we online an offlined CPU: genirq: Flags mismatch irq 71. 0002cc20 (spinlock1) vs. 0002cc20 (spinlock1) Pid: 2542, comm: init.late Not tainted 3.9.0-rc6upstream #1 Call Trace: [<ffffffff811156de>] __setup_irq+0x23e/0x4a0 [<ffffffff81194191>] ? kmem_cache_alloc_trace+0x221/0x250 [<ffffffff811161bb>] request_threaded_irq+0xfb/0x160 [<ffffffff8104c6f0>] ? xen_spin_trylock+0x20/0x20 [<ffffffff813a8423>] bind_ipi_to_irqhandler+0xa3/0x160 [<ffffffff81303758>] ? kasprintf+0x38/0x40 [<ffffffff8104c6f0>] ? xen_spin_trylock+0x20/0x20 [<ffffffff810cad35>] ? update_max_interval+0x15/0x40 [<ffffffff816605db>] xen_init_lock_cpu+0x3c/0x78 [<ffffffff81660029>] xen_hvm_cpu_notify+0x29/0x33 [<ffffffff81676bdd>] notifier_call_chain+0x4d/0x70 [<ffffffff810bb2a9>] __raw_notifier_call_chain+0x9/0x10 [<ffffffff8109402b>] __cpu_notify+0x1b/0x30 [<ffffffff8166834a>] _cpu_up+0xa0/0x14b [<ffffffff816684ce>] cpu_up+0xd9/0xec [<ffffffff8165f754>] store_online+0x94/0xd0 [<ffffffff8141d15b>] dev_attr_store+0x1b/0x20 [<ffffffff81218f44>] sysfs_write_file+0xf4/0x170 [<ffffffff811a2864>] vfs_write+0xb4/0x130 [<ffffffff811a302a>] sys_write+0x5a/0xa0 [<ffffffff8167ada9>] system_call_fastpath+0x16/0x1b cpu 1 spinlock event irq -16 smpboot: Booting Node 0 Processor 1 APIC 0x2 And if one looks at the /proc/interrupts right after offlining (CPU1): 70: 0 0 xen-percpu-ipi spinlock0 71: 0 0 xen-percpu-ipi spinlock1 77: 0 0 xen-percpu-ipi spinlock2 There is the oddity of the 'spinlock1' still being present. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 888b65b4 upstream. In the PVHVM path when we do CPU online/offline path we would leak the timer%d IRQ line everytime we do a offline event. The online path (xen_hvm_setup_cpu_clockevents via x86_cpuinit.setup_percpu_clockev) would allocate a new interrupt line for the timer%d. But we would still use the old interrupt line leading to: kernel BUG at /home/konrad/ssd/konrad/linux/kernel/hrtimer.c:1261! invalid opcode: 0000 [#1] SMP RIP: 0010:[<ffffffff810b9e21>] [<ffffffff810b9e21>] hrtimer_interrupt+0x261/0x270 .. snip.. <IRQ> [<ffffffff810445ef>] xen_timer_interrupt+0x2f/0x1b0 [<ffffffff81104825>] ? stop_machine_cpu_stop+0xb5/0xf0 [<ffffffff8111434c>] handle_irq_event_percpu+0x7c/0x240 [<ffffffff811175b9>] handle_percpu_irq+0x49/0x70 [<ffffffff813a74a3>] __xen_evtchn_do_upcall+0x1c3/0x2f0 [<ffffffff813a760a>] xen_evtchn_do_upcall+0x2a/0x40 [<ffffffff8167c26d>] xen_hvm_callback_vector+0x6d/0x80 <EOI> [<ffffffff81666d01>] ? start_secondary+0x193/0x1a8 [<ffffffff81666cfd>] ? start_secondary+0x18f/0x1a8 There is also the oddity (timer1) in the /proc/interrupts after offlining CPU1: 64: 1121 0 xen-percpu-virq timer0 78: 0 0 xen-percpu-virq timer1 84: 0 2483 xen-percpu-virq timer2 This patch fixes it. Signed-off-by:
-
Johannes Berg authored
commit 990de49f upstream. When a full scan 2.4 and 5 GHz scan is scheduled, but then the 2.4 GHz part of the scan disables a 5.2 GHz channel due to, e.g. receiving country or frequency information, that 5.2 GHz channel might already be in the list of channels to scan next. Then, when the driver checks if it should do a passive scan, that will return false and attempt an active scan. This is not only wrong but can also lead to the iwlwifi device firmware crashing since it checks regulatory as well. Fix this by not setting the channel flags to just disabled but rather OR'ing in the disabled flag. That way, even if the race happens, the channel will be scanned passively which is still (mostly) correct. Signed-off-by:
-
Rafael J. Wysocki authored
commit 769ba721 upstream. Commit b51306c6 (PCI: Set device power state to PCI_D0 for device without native PM support) modified pci_platform_power_transition() by adding code causing dev->current_state for devices that don't support native PCI PM but are power-manageable by the platform to be changed to PCI_D0 regardless of the value returned by the preceding platform_pci_set_power_state(). In particular, that also is done if the platform_pci_set_power_state() has been successful, which causes the correct power state of the device set by pci_update_current_state() in that case to be overwritten by PCI_D0. Fix that mistake by making the fallback to PCI_D0 only happen if the platform_pci_set_power_state() has returned an error. [bhelgaas: folded in Yinghai's simplification, added URL & stable info] Reference: http://lkml.kernel.org/r/27806FC4E5928A408B78E88BBC67A2306F466BBA@ORSMSX101.amr.corp.intel.comReported-by:
Chris J. Benenati <chris.j.benenati@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Federico Vaga authored
commit 5a65dcc0 upstream. The serial core uses device_find_child() but does not drop the reference to the retrieved child after using it. This patch add the missing put_device(). What I have done to test this issue. I used a machine with an AMBA PL011 serial driver. I tested the patch on next-20120408 because the last branch [next-20120415] does not boot on this board. For test purpose, I added some pr_info() messages to print the refcount after device_find_child() (lines: 1937,2009), and after put_device() (lines: 1947, 2021). Boot the machine *without* put_device(). Then: echo reboot > /sys/power/disk echo disk > /sys/power/state [ 87.058575] uart_suspend_port:1937 refcount 4 [ 87.058582] uart_suspend_port:1947 refcount 4 [ 87.098083] uart_resume_port:2009refcount 5 [ 87.098088] uart_resume_port:2021 refcount 5 echo disk > /sys/power/state [ 103.055574] uart_suspend_port:1937 refcount 6 [ 103.055580] uart_suspend_port:1947 refcount 6 [ 103.095322] uart_resume_port:2009 refcount 7 [ 103.095327] uart_resume_port:2021 refcount 7 echo disk > /sys/power/state [ 252.459580] uart_suspend_port:1937 refcount 8 [ 252.459586] uart_suspend_port:1947 refcount 8 [ 252.499611] uart_resume_port:2009 refcount 9 [ 252.499616] uart_resume_port:2021 refcount 9 The refcount continuously increased. Boot the machine *with* this patch. Then: echo reboot > /sys/power/disk echo disk > /sys/power/state [ 159.333559] uart_suspend_port:1937 refcount 4 [ 159.333566] uart_suspend_port:1947 refcount 3 [ 159.372751] uart_resume_port:2009 refcount 4 [ 159.372755] uart_resume_port:2021 refcount 3 echo disk > /sys/power/state [ 185.713614] uart_suspend_port:1937 refcount 4 [ 185.713621] uart_suspend_port:1947 refcount 3 [ 185.752935] uart_resume_port:2009 refcount 4 [ 185.752940] uart_resume_port:2021 refcount 3 echo disk > /sys/power/state [ 207.458584] uart_suspend_port:1937 refcount 4 [ 207.458591] uart_suspend_port:1947 refcount 3 [ 207.498598] uart_resume_port:2009 refcount 4 [ 207.498605] uart_resume_port:2021 refcount 3 The refcount correctly handled. Signed-off-by:
Federico Vaga <federico.vaga@gmail.com> Signed-off-by:
-
Alex Deucher authored
commit 0cd9cb76 upstream. If we fail to map the mmio BAR, skip driver tear down that requires mmio. Should fix: https://bugzilla.kernel.org/show_bug.cgi?id=56541Signed-off-by:
-
Alex Deucher authored
commit 2e97be73 upstream. Avoids potential interrupt storms when the display is disabled. May fix: https://bugzilla.kernel.org/show_bug.cgi?id=56041Signed-off-by:
-
Clemens Ladisch authored
commit cbc200bc upstream. Commit 88a8516a (ALSA: usbaudio: implement USB autosuspend) introduced autopm for all USB audio/MIDI devices. However, many MIDI devices, such as synthesizers, do not merely transmit MIDI messages but use their MIDI inputs to control other functions. With autopm, these devices would get powered down as soon as the last MIDI port device is closed on the host. Even some plain MIDI interfaces could get broken: they automatically send Active Sensing messages while powered up, but as soon as these messages cease, the receiving device would interpret this as an accidental disconnection. Commit f5f16541 (ALSA: usb-audio: Fix missing autopm for MIDI input) introduced another regression: some devices (e.g. the Roland GAIA SH-01) are self-powered but do a reset whenever the USB interface's power state changes. To work around all this, just disable autopm for all USB MIDI devices. Reported-by: Laurens Holst Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Calvin Owens authored
commit 1539d4f8 upstream. When recording at 176.2KHz or 192Khz, the device adds a 32-bit length header to the capture packets, which obviously needs to be ignored for recording to work properly. Userspace expected: L0 L1 L2 R0 R1 R2 ...but actually got: R2 L0 L1 L2 R0 R1 Also, the last byte of the length header being interpreted as L0 of the first sample caused spikes every 0.5ms, resulting in a loud 16KHz tone (about the highest 'B' on a piano) being present throughout captures. Tested at all sample rates on an E-Mu 0404USB, and tested for regressions on a generic USB headset. Signed-off-by:
Calvin Owens <jcalvinowens@gmail.com> Signed-off-by:
-
Namhyung Kim authored
commit ed6f1c99 upstream. Check return value and bail out if it's NULL. Link: http://lkml.kernel.org/r/1365553093-10180-2-git-send-email-namhyung@kernel.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Namhyung Kim authored
commit 9f50afcc upstream. The ftrace_graph_count can be decreased with a "!" pattern, so that the enabled flag should be updated too. Link: http://lkml.kernel.org/r/1365663698-2413-1-git-send-email-namhyung@kernel.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by:
-
Bjørn Mork authored
commit a2a2d6c7 upstream. Adding support for a Mediatek based device labelled as D-Link Model: DWM-156, H/W Ver: A7 Also adding two other device IDs found in the Debian(!) packages included on the embedded device driver CD. This is a composite MBIM + serial ports + card reader device: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7d01 Rev= 3.00 S: Manufacturer=D-Link,Inc S: Product=D-Link DWM-156 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Namhyung Kim authored
commit 39e30cd1 upstream. The first page was allocated separately, so no need to start from 0. Link: http://lkml.kernel.org/r/1364820385-32027-2-git-send-email-namhyung@kernel.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by:
-
J. Bruce Fields authored
commit 0c7c3e67 upstream. Don't actually close any opens until we don't need them at all. This means being left with write access when it's not really necessary, but that's better than putting a file that might still have posix locks held on it, as we have been. Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
-
David Engraf authored
commit 51fd36f3 upstream. One can trigger an overflow when using ktime_add_ns() on a 32bit architecture not supporting CONFIG_KTIME_SCALAR. When passing a very high value for u64 nsec, e.g. 7881299347898368000 the do_div() function converts this value to seconds (7881299347) which is still to high to pass to the ktime_set() function as long. The result in is a negative value. The problem on my system occurs in the tick-sched.c, tick_nohz_stop_sched_tick() when time_delta is set to timekeeping_max_deferment(). The check for time_delta < KTIME_MAX is valid, thus ktime_add_ns() is called with a too large value resulting in a negative expire value. This leads to an endless loop in the ticker code: time_delta: 7881299347898368000 expires = ktime_add_ns(last_update, time_delta) expires: negative value This fix caps the value to KTIME_MAX. This error doesn't occurs on 64bit or architectures supporting CONFIG_KTIME_SCALAR (e.g. ARM, x86-32). Signed-off-by:
David Engraf <david.engraf@sysgo.com> [jstultz: Minor tweaks to commit message & header] Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Prarit Bhargava authored
commit 8f294b5a upstream. The settimeofday01 test in the LTP testsuite effectively does gettimeofday(current time); settimeofday(Jan 1, 1970 + 100 seconds); settimeofday(current time); This test causes a stack trace to be displayed on the console during the setting of timeofday to Jan 1, 1970 + 100 seconds: [ 131.066751] ------------[ cut here ]------------ [ 131.096448] WARNING: at kernel/time/clockevents.c:209 clockevents_program_event+0x135/0x140() [ 131.104935] Hardware name: Dinar [ 131.108150] Modules linked in: sg nfsv3 nfs_acl nfsv4 auth_rpcgss nfs dns_resolver fscache lockd sunrpc nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tables kvm_amd kvm sp5100_tco bnx2 i2c_piix4 crc32c_intel k10temp fam15h_power ghash_clmulni_intel amd64_edac_mod pcspkr serio_raw edac_mce_amd edac_core microcode xfs libcrc32c sr_mod sd_mod cdrom ata_generic crc_t10dif pata_acpi radeon i2c_algo_bit drm_kms_helper ttm drm ahci pata_atiixp libahci libata usb_storage i2c_core dm_mirror dm_region_hash dm_log dm_mod [ 131.176784] Pid: 0, comm: swapper/28 Not tainted 3.8.0+ #6 [ 131.182248] Call Trace: [ 131.184684] <IRQ> [<ffffffff810612af>] warn_slowpath_common+0x7f/0xc0 [ 131.191312] [<ffffffff8106130a>] warn_slowpath_null+0x1a/0x20 [ 131.197131] [<ffffffff810b9fd5>] clockevents_program_event+0x135/0x140 [ 131.203721] [<ffffffff810bb584>] tick_program_event+0x24/0x30 [ 131.209534] [<ffffffff81089ab1>] hrtimer_interrupt+0x131/0x230 [ 131.215437] [<ffffffff814b9600>] ? cpufreq_p4_target+0x130/0x130 [ 131.221509] [<ffffffff81619119>] smp_apic_timer_interrupt+0x69/0x99 [ 131.227839] [<ffffffff8161805d>] apic_timer_interrupt+0x6d/0x80 [ 131.233816] <EOI> [<ffffffff81099745>] ? sched_clock_cpu+0xc5/0x120 [ 131.240267] [<ffffffff814b9ff0>] ? cpuidle_wrap_enter+0x50/0xa0 [ 131.246252] [<ffffffff814b9fe9>] ? cpuidle_wrap_enter+0x49/0xa0 [ 131.252238] [<ffffffff814ba050>] cpuidle_enter_tk+0x10/0x20 [ 131.257877] [<ffffffff814b9c89>] cpuidle_idle_call+0xa9/0x260 [ 131.263692] [<ffffffff8101c42f>] cpu_idle+0xaf/0x120 [ 131.268727] [<ffffffff815f8971>] start_secondary+0x255/0x257 [ 131.274449] ---[ end trace 1151a50552231615 ]--- When we change the system time to a low value like this, the value of timekeeper->offs_real will be a negative value. It seems that the WARN occurs because an hrtimer has been started in the time between the releasing of the timekeeper lock and the IPI call (via a call to on_each_cpu) in clock_was_set() in the do_settimeofday() code. The end result is that a REALTIME_CLOCK timer has been added with softexpires = expires = KTIME_MAX. The hrtimer_interrupt() fires/is called and the loop at kernel/hrtimer.c:1289 is executed. In this loop the code subtracts the clock base's offset (which was set to timekeeper->offs_real in do_settimeofday()) from the current hrtimer_cpu_base->expiry value (which was KTIME_MAX): KTIME_MAX - (a negative value) = overflow A simple check for an overflow can resolve this problem. Using KTIME_MAX instead of the overflow value will result in the hrtimer function being run, and the reprogramming of the timer after that. Cc: Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Prarit Bhargava <prarit@redhat.com> [jstultz: Tweaked commit subject] Signed-off-by:
-
Stefani Seibold authored
commit 58f8b6c4 upstream. This patch add a missing usb device id for the GDMBoost V1.x device The patch is against 3.9-rc5 Signed-off-by:
Stefani Seibold <stefani@seibold.net> Signed-off-by:
-
Christian Lamparter authored
commit 9e9dd0e8 upstream. The "Mobile Sandy Bridge CPUs" in the Fujitsu Esprimo Q900 mini desktop PCs are probably misleading the LVDS detection code in intel_lvds_supported. Nothing is connected to the LVDS ports in these systems. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
