- 22 May, 2024 28 commits
-
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-Id: <20240331-module-owner-virtio-v2-15-98f04bfaf46a@linaro.org> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Alexander Graf <graf@amazon.com>
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Acked-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com>
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com>
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
virtio core already sets the .owner, so driver does not need to. Signed-off-by:
-
David Stevens authored
Treat stats requests as wakeup events to ensure that the driver responds to device requests in a timely manner. Signed-off-by:
David Stevens <stevensd@chromium.org> Acked-by:
David Hildenbrand <david@redhat.com> Message-Id: <20240321012445.1593685-3-stevensd@google.com> Signed-off-by:
-
David Stevens authored
Wakeup sources don't support nesting multiple events, so sharing a single object between multiple drivers can result in one driver overriding the wakeup event processing period specified by another driver. Have the virtio balloon driver use the wakeup source of the device it is bound to rather than the wakeup source of the parent device, to avoid conflicts with the transport layer. Note that although the virtio balloon's virtio_device itself isn't what actually wakes up the device, it is responsible for processing wakeup events. In the same way that EPOLLWAKEUP uses a dedicated wakeup_source to prevent suspend when userspace is processing wakeup events, a dedicated wakeup_source is necessary when processing wakeup events in a higher layer in the kernel. Fixes: b12fbc3f ("virtio_balloon: stay awake while adjusting balloon") Signed-off-by:
-
David Hildenbrand authored
With virtio-mem, primarily hibernation is problematic: as the machine shuts down, the virtio-mem device loses its state. Powering the machine back up is like losing a bunch of DIMMs. While there would be ways to add limited support, suspend+resume is more commonly used for VMs and "easier" to support cleanly. s2idle can be supported without any device dependencies. Similarly, one would expect suspend-to-ram (i.e., S3) to work out of the box. However, QEMU currently unplugs all device memory when resuming the VM, using a cold reset on the "wakeup" path. In order to support S3, we need a feature flag for the device to tell us if memory remains plugged when waking up. In the future, QEMU will implement this feature. So let's always support s2idle and support S3 with plugged memory only if the device indicates support. Block hibernation early using the PM notifier. Trying to hibernate now fails early: # echo disk > /sys/power/state [ 26.455369] PM: hibernation: hibernation entry [ 26.458271] virtio_mem virtio0: hibernation is not supported. [ 26.462498] PM: hibernation: hibernation exit -bash: echo: write error: Operation not permitted s2idle works even without the new feature bit: # echo s2idle > /sys/power/mem_sleep # echo mem > /sys/power/state [ 52.083725] PM: suspend entry (s2idle) [ 52.095950] Filesystems sync: 0.010 seconds [ 52.101493] Freezing user space processes [ 52.104213] Freezing user space processes completed (elapsed 0.001 seconds) [ 52.106520] OOM killer disabled. [ 52.107655] Freezing remaining freezable tasks [ 52.110880] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 52.113296] printk: Suspending console(s) (use no_console_suspend to debug) S3 does not work without the feature bit when memory is plugged: # echo deep > /sys/power/mem_sleep # echo mem > /sys/power/state [ 32.788281] PM: suspend entry (deep) [ 32.816630] Filesystems sync: 0.027 seconds [ 32.820029] Freezing user space processes [ 32.823870] Freezing user space processes completed (elapsed 0.001 seconds) [ 32.827756] OOM killer disabled. [ 32.829608] Freezing remaining freezable tasks [ 32.833842] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 32.837953] printk: Suspending console(s) (use no_console_suspend to debug) [ 32.916172] virtio_mem virtio0: suspend+resume with plugged memory is not supported [ 32.916181] virtio-pci 0000:00:02.0: PM: pci_pm_suspend(): virtio_pci_freeze+0x0/0x50 returns -1 [ 32.916197] virtio-pci 0000:00:02.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x170 returns -1 [ 32.916210] virtio-pci 0000:00:02.0: PM: failed to suspend async: error -1 But S3 works with the new feature bit when memory is plugged (patched QEMU): # echo deep > /sys/power/mem_sleep # echo mem > /sys/power/state [ 33.983694] PM: suspend entry (deep) [ 34.009828] Filesystems sync: 0.024 seconds [ 34.013589] Freezing user space processes [ 34.016722] Freezing user space processes completed (elapsed 0.001 seconds) [ 34.019092] OOM killer disabled. [ 34.020291] Freezing remaining freezable tasks [ 34.023549] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 34.026090] printk: Suspending console(s) (use no_console_suspend to debug) Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by:
-
Mike Christie authored
This removes the signal/coredump hacks added for vhost_tasks in: Commit f9010dbd ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression") When that patch was added vhost_tasks did not handle SIGKILL and would try to ignore/clear the signal and continue on until the device's close function was called. In the previous patches vhost_tasks and the vhost drivers were converted to support SIGKILL by cleaning themselves up and exiting. The hacks are no longer needed so this removes them. Signed-off-by:
Mike Christie <michael.christie@oracle.com> Message-Id: <20240316004707.45557-10-michael.christie@oracle.com> Signed-off-by:
-
Mike Christie authored
Instead of lingering until the device is closed, this has us handle SIGKILL by: 1. marking the worker as killed so we no longer try to use it with new virtqueues and new flush operations. 2. setting the virtqueue to worker mapping so no new works are queued. 3. running all the exiting works. Suggested-by:
Edward Adam Davis <eadavis@qq.com> Reported-and-tested-by: syzbot+98edc2df894917b3431f@syzkaller.appspotmail.com Message-Id: <tencent_546DA49414E876EEBECF2C78D26D242EE50A@qq.com> Signed-off-by:
-
Mike Christie authored
In the next patches where the worker can be killed while in use, we need to be able to take the worker mutex and kill queued works for new IO and flushes, and set some new flags to prevent new __vhost_vq_attach_worker calls from swapping in/out killed workers. If we are holding the worker mutex during a flush and the flush's work is still in the queue, the worker code that will handle the SIGKILL cleanup won't be able to take the mutex and perform it's cleanup. So this patch has us drop the worker mutex while waiting for the flush to complete. Signed-off-by:
-
Mike Christie authored
__vhost_vq_attach_worker uses the vhost_dev mutex to serialize the swapping of a virtqueue's worker. This was done for simplicity because we are already holding that mutex. In the next patches where the worker can be killed while in use, we need finer grained locking because some drivers will hold the vhost_dev mutex while flushing. However in the SIGKILL handler in the next patches, we will need to be able to swap workers (set current one to NULL), kill queued works and stop new flushes while flushes are in progress. To prepare us, this has us use the virtqueue mutex for swapping workers instead of the vhost_dev one. Signed-off-by:
-
Mike Christie authored
vhost_vq_work_queue will never fail when queueing the TMF's response handling because a guest can only send us TMFs when the device is fully setup so there is always a worker at that time. In the next patches we will modify the worker code so it handles SIGKILL by exiting before outstanding commands/TMFs have sent their responses. In that case vhost_vq_work_queue can fail when we try to send a response. This has us just free the TMF's resources since at this time the guest won't be able to get a response even if we could send it. Signed-off-by:
-
Mike Christie authored
vhost_vq_flush is no longer used so remove it. Signed-off-by:
-
Mike Christie authored
We flush all the workers that are not also used by the ctl vq to make sure that responses queued by LIO before the TMF response are sent before the TMF response. This requires a special vhost_vq_flush function which, in the next patches where we handle SIGKILL killing workers while in use, will require extra locking/complexity. To avoid that, this patch has us flush the entire device from the system work queue, then queue up sending the response from there. This is a little less optimal since we now flush all workers but this will be ok since commands have already timed out and perf is not a concern. Signed-off-by:
-
Mike Christie authored
In the next patches we will support the vhost_task being killed while in use. The problem for vhost-scsi is that we can't free some structs until we get responses for commands we have submitted to the target layer and we currently process the responses from the vhost_task. This has just drop the responses and free the command's resources. When all commands have completed then operations like flush will be woken up and we can complete device release and endpoint cleanup. Signed-off-by:
-
Mike Christie authored
Currently, we can try to queue an event's work before the vhost_task is created. When this happens we just drop it in vhost_scsi_do_plug before even calling vhost_vq_work_queue. During a device shutdown we do the same thing after vhost_scsi_clear_endpoint has cleared the backends. In the next patches we will be able to kill the vhost_task before we have cleared the endpoint. In that case, vhost_vq_work_queue can fail and we will leak the event's memory. This has handle the failure by just freeing the event. This is safe to do, because vhost_vq_work_queue will only return failure for us when the vhost_task is killed and so userspace will not be able to handle events if we sent them. Signed-off-by:
-
Li Zhijian authored
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). sprintf() will be converted as weel if they have. Generally, this patch is generated by make coccicheck M=<path/to/file> MODE=patch \ COCCI=scripts/coccinelle/api/device_attr_show.cocci No functional change intended CC: "Michael S. Tsirkin" <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> CC: Xuan Zhuo <xuanzhuo@linux.alibaba.com> CC: virtualization@lists.linux.dev Signed-off-by:
Li Zhijian <lizhijian@fujitsu.com> Message-Id: <20240314095853.1326111-1-lizhijian@fujitsu.com> Signed-off-by:
-
Yuxue Liu authored
In the vp_vdpa_set_status function, when setting the device status to VIRTIO_CONFIG_S_DRIVER_OK, the vp_vdpa_request_irq function may fail. In such cases, the device status should not be set to DRIVER_OK. Add exception printing to remind the user. Signed-off-by:
Yuxue Liu <yuxue.liu@jaguarmicro.com> Message-Id: <20240325105448.235-1-gavin.liu@jaguarmicro.com> Signed-off-by:
-
- 01 May, 2024 2 commits
-
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Message-Id: <ef71f955531d5e41b20d801e1149bb08d155679a.1709886922.git.u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Zhu Lingshan authored
This commit applies maintainer role of Intel vDPA driver for myself. I am the author of this driver and have been contributing to it for long time, I would like to help this solution evolve in future. This driver is still under virtio maintenance. Signed-off-by:
Zhu Lingshan <lingshan.zhu@intel.com> Message-Id: <20240227144519.555554-1-lingshan.zhu@intel.com> Signed-off-by:
Jason Wang <jasowang@redhat.com>
-
- 30 Apr, 2024 5 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fix from Paolo Bonzini: "A pretty straightforward fix for a NULL pointer dereference, plus the accompanying reproducer" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: Add test for uaccesses to non-existent vgic-v2 CPUIF KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.9, part #2 - Fix + test for a NULL dereference resulting from unsanitised user input in the vgic-v2 device attribute accessors
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply fixes from Sebastian Reichel: - mt6360_charger: Fix of_match for usb-otg-vbus regulator - rt9455: Fix unused-const-variable for !CONFIG_USB_PHY * tag 'for-v6.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: mt6360_charger: Fix of_match for usb-otg-vbus regulator power: rt9455: hide unused rt9455_boost_voltage_values
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fix from Ilpo Järvinen: - Add Grand Ridge to HPM CPU list * tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: ISST: Add Grand Ridge to HPM CPU list
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: - Fix a double-free in the pinctrl_enable() errorpath - Fix a refcount leak in pinctrl_dt_to_map() - Fix selecting the GPIO pin control state and the UART3 pin config group in the Intel Baytrail driver - Fix readback of schmitt trigger status in the Mediatek Paris driver, along with some semantic pin config issues in this driver - Fix a pin suffix typo in the Meson A1 driver - Fix an erroneous register offset in he Aspeed G6 driver - Fix an inconsistent lock state and the interrupt type on resume in the Renesas RZG2L driver - Fix some minor confusion in the Renesas DT bindings * tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: renesas: rzg2l: Configure the interrupt type on resume pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map() pinctrl: baytrail: Add pinconf group for uart3 pinctrl: baytrail: Fix selecting gpio pinctrl state pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback pinctrl: core: delete incorrect free in pinctrl_enable() pinctrl/meson: fix typo in PDM's pin name pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties
-
- 29 Apr, 2024 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fixes from Tejun Heo: "Two doc update patches and the following three fixes: - On single node systems, the default pool is used but the node_nr_active for the default pool was set to min_active. This effectively limited the max concurrency of unbound pools on single node systems to 8 causing performance regressions on some workloads. Fixed by setting the default pool's node_nr_active to max_active. - wq_update_node_max_active() could trigger divide-by-zero if the intersection between the allowed CPUs for an unbound workqueue and online CPUs becomes empty. - When kick_pool() was trying to repatriate a worker to a CPU in its pod by setting task->wake_cpu, it didn't consider whether the CPU being selected is online or not which obviously can lead to subobtimal behaviors. On s390, this triggered a crash in arch code. The workqueue patch removes the gross misbehavior but doesn't fix the crash completely as there's a race window in which CPUs can go down after wake_cpu is set. Need to decide whether the fix should be on the core or arch side" * tag 'wq-for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Fix divide error in wq_update_node_max_active() workqueue: The default node_nr_active should have its max set to max_active workqueue: Fix selection of wake_cpu in kick_pool() docs/zh_CN: core-api: Update translation of workqueue.rst to 6.9-rc1 Documentation/core-api: Update events_freezable_power references. -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fix from James Bottomley: "Minor core fix to prevent the sd driver printing the stream count every time we rescan and instead print only if it's changed" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Only print updates to permanent stream count
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fix from Chuck Lever: - Avoid freeing unallocated memory (v6.7 regression) * tag 'nfsd-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: Fix nfsd4_encode_fattr4() crasher
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Trond Myklebust: - Fix an Oops in xs_tcp_tls_setup_socket - Fix an Oops due to missing error handling in nfs_net_init() * tag 'nfs-for-6.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: Handle error of rpc_proc_register() in nfs_net_init(). SUNRPC: add a missing rpc_stat for TCP TLS
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull bcachefs fixes from Kent Overstreet: "Tiny set of fixes this time" * tag 'bcachefs-2024-04-29' of https://evilpiepirate.org/git/bcachefs: bcachefs: fix integer conversion bug bcachefs: btree node scan now fills in sectors_written bcachefs: Remove accidental debug assert
-
