When operating in XInput mode, the 8bitdo SN30 Pro+ requires the same
quirk as the official Xbox One Bluetooth controllers for rumble to
function.

Other controllers like the N30 Pro 2, SF30 Pro, SN30 Pro, etc. probably
also need this quirk, but I do not have the hardware to test.
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Saitek X52 family of joysticks has a pair of axes that were
originally (by the Windows driver) used as mouse pointer controls. The
corresponding usage page is the Game Controls page, which is not
recognized by the generic HID driver, and therefore, both axes get
mapped to ABS_MISC. The quirk makes the second axis get mapped to
ABS_MISC+1, and therefore made available separately.

One Saitek X52 device is already fixed. This patch fixes the other two
known devices with VID/PID 06a3:0255 and 06a3:0762.
Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This reverts commit d3132792.

This patch causes a regression with quite a few devices, as probing fails
because of the race where the first IRQ is dropped on the floor (after
hid_device_io_start() happens, but before the 50ms timeout passess), and
report descriptor never gets parsed and populated.

As this is just a boot time micro-optimization, let's revert the
patch for 5.9 now, and fix this properly eventually for next merge
window.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=208935Reported-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Reported-by: Marius Zachmann <mail@mariuszachmann.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

`uref->usage_index` is not always being properly checked, causing
hiddev_ioctl_usage() to go out of bounds under some cases. Fix it.

Reported-by: syzbot+34ee1b45d88571c2fa8b@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=f2aebe90b8c56806b050a20b36f51ed6acabe802Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. One Lenovo PixArt
mouse is already fixed. Got two references for 17ef:602e and three
references for 17ef:6019 misbehaving like this. Got one direct bug
report for 17ef:6093 from Wyatt Ward (wyatt8740). So add
HID_QUIRK_ALWAYS_POLL for all of them.

Link: https://github.com/sriemer/fix-linux-mouse issue 22
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Before this commit i2c_hid_parse() consists of the following steps:

1. Send power on cmd
2. usleep_range(1000, 5000)
3. Send reset cmd
4. Wait for reset to complete (device interrupt, or msleep(100))
5. Send power on cmd
6. Try to read HID descriptor

Notice how there is an usleep_range(1000, 5000) after the first power-on
command, but not after the second power-on command.

Testing has shown that at least on the BMAX Y13 laptop's i2c-hid touchpad,
not having a delay after the second power-on command causes the HID
descriptor to read as all zeros.

In case we hit this on other devices too, the descriptor being all zeros
can be recognized by the following message being logged many, many times:

hid-generic 0018:0911:5288.0002: unknown main item tag 0x0

At the same time as the BMAX Y13's touchpad issue was debugged,
Kai-Heng was working on debugging some issues with Goodix i2c-hid
touchpads. It turns out that these need a delay after a PWR_ON command
too, otherwise they stop working after a suspend/resume cycle.
According to Goodix a delay of minimal 60ms is needed.

Having multiple cases where we need a delay after sending the power-on
command, seems to indicate that we should always sleep after the power-on
command.

This commit fixes the mentioned issues by moving the existing 1ms sleep to
the i2c_hid_set_power() function and changing it to a 60ms sleep.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208247Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-and-tested-by: Andrea Borgia <andrea@borgia.bo.it>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

macally_id_table is not modified and can be made const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

cougar_id_table[] is not changed and can be made const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - fix for some modern devices that return multi-byte battery report,
   from Grant Likely

 - fix for devices with Resolution Multiplier, from Peter Hutterer

 - device probing speed increase, from Dmitry Torokhov

 - ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede

 - other small assorted fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: quirks: add NOGET quirk for Logitech GROUP
  HID: Replace HTTP links with HTTPS ones
  HID: udraw-ps3: Replace HTTP links with HTTPS ones
  HID: mcp2221: Replace HTTP links with HTTPS ones
  HID: input: Fix devices that return multiple bytes in battery report
  HID: lenovo: Fix spurious F23 key press report during resume from suspend
  HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard fn_lock support
  HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support
  HID: lenovo: Rename fn_lock sysfs attr handlers to make them generic
  HID: lenovo: Factor out generic parts of the LED code
  HID: lenovo: Merge tpkbd and cptkbd data structures
  HID: intel-ish-hid: Replace PCI_DEV_FLAGS_NO_D3 with pci_save_state
  HID: Wiimote: Treat the d-pad as an analogue stick
  HID: input: do not run GET_REPORT unless there's a Resolution Multiplier
  HID: usbhid: remove redundant assignment to variable retval
  HID: usbhid: do not sleep when opening device

- ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede

- fix for some modern devices that return multi-byte battery report, from
  Grant Likely
- fix for devices with Resolution Multiplier, from Peter Hutterer
- device probing speed increase, from Dmitry Torokhov

Pull Kbuild updates from Masahiro Yamada:

 - run the checker (e.g. sparse) after the compiler

 - remove unneeded cc-option tests for old compiler flags

 - fix tar-pkg to install dtbs

 - introduce ccflags-remove-y and asflags-remove-y syntax

 - allow to trace functions in sub-directories of lib/

 - introduce hostprogs-always-y and userprogs-always-y syntax

 - various Makefile cleanups

* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
  kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
  kbuild: introduce hostprogs-always-y and userprogs-always-y
  kbuild: sort hostprogs before passing it to ifneq
  kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
  kbuild: Replace HTTP links with HTTPS ones
  kbuild: trace functions in subdirectories of lib/
  kbuild: introduce ccflags-remove-y and asflags-remove-y
  kbuild: do not export LDFLAGS_vmlinux
  kbuild: always create directories of targets
  powerpc/boot: add DTB to 'targets'
  kbuild: buildtar: add dtbs support
  kbuild: remove cc-option test of -ffreestanding
  kbuild: remove cc-option test of -fno-stack-protector
  Revert "kbuild: Create directory for target DTB"
  kbuild: run the checker after the compiler

Pull NFS server updates from Chuck Lever:
 "Highlights:
   - Support for user extended attributes on NFS (RFC 8276)
   - Further reduce unnecessary NFSv4 delegation recalls

  Notable fixes:
   - Fix recent krb5p regression
   - Address a few resource leaks and a rare NULL dereference

  Other:
   - De-duplicate RPC/RDMA error handling and other utility functions
   - Replace storage and display of kernel memory addresses by tracepoints"

* tag 'nfsd-5.9' of git://git.linux-nfs.org/projects/cel/cel-2.6: (38 commits)
  svcrdma: CM event handler clean up
  svcrdma: Remove transport reference counting
  svcrdma: Fix another Receive buffer leak
  SUNRPC: Refresh the show_rqstp_flags() macro
  nfsd: netns.h: delete a duplicated word
  SUNRPC: Fix ("SUNRPC: Add "@len" parameter to gss_unwrap()")
  nfsd: avoid a NULL dereference in __cld_pipe_upcall()
  nfsd4: a client's own opens needn't prevent delegations
  nfsd: Use seq_putc() in two functions
  svcrdma: Display chunk completion ID when posting a rw_ctxt
  svcrdma: Record send_ctxt completion ID in trace_svcrdma_post_send()
  svcrdma: Introduce Send completion IDs
  svcrdma: Record Receive completion ID in svc_rdma_decode_rqst
  svcrdma: Introduce Receive completion IDs
  svcrdma: Introduce infrastructure to support completion IDs
  svcrdma: Add common XDR encoders for RDMA and Read segments
  svcrdma: Add common XDR decoders for RDMA and Read segments
  SUNRPC: Add helpers for decoding list discriminators symbolically
  svcrdma: Remove declarations for functions long removed
  svcrdma: Clean up trace_svcrdma_send_failed() tracepoint
  ...

Pull regset conversion fix from Al Viro:
 "Fix a regression from an unnoticed bisect hazard in the regset series.

  A bunch of old (aout, originally) primitives used by coredumps became
  dead code after fdpic conversion to regsets. Removal of that dead code
  had been the first commit in the followups to regset series;
  unfortunately, it happened to hide the bisect hazard on sh (extern for
  fpregs_get() had not been updated in the main series when it should
  have been; followup simply made fpregs_get() static). And without that
  followup commit this bisect hazard became breakage in the mainline"
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  kill unused dump_fpu() instances

Pull pin control updates from Linus Walleij:
 "This is the bulk of the pin control changes for the v5.9 kernel
  series:

  Core changes:

   - The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range()
     macro" was put in an immutable branch and merged into the pinctrl
     tree as well. We see these changes also here.

   - Improved debug output for pins used as GPIO.

  New drivers:

   - Ocelot Sparx5 SoC driver.

   - Intel Emmitsburg SoC subdriver.

   - Intel Tiger Lake-H SoC subdriver.

   - Qualcomm PM660 SoC subdriver.

   - Renesas SH-PFC R8A774E1 subdriver.

  Driver improvements:

   - Linear improvement and cleanups of the Intel drivers for
     Cherryview, Lynxpoint, Baytrail etc. Improved locking among other
     things.

   - Renesas SH-PFC has added support for RPC pins, groups, and
     functions to r8a77970 and r8a77980.

   - The newere Freescale (now NXP) i.MX8 pin controllers have been
     modularized. This is driven by the Google Android GKI initiative I
     think.

   - Open drain support for pins on the Qualcomm IPQ4019.

   - The Ingenic driver can handle both edges IRQ detection.

   - A big slew of documentation fixes all over the place.

   - A few irqchip template conversions by yours truly.

* tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
  dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC
  pinctrl: stmfx: Use irqchip template
  pinctrl: amd: Use irqchip template
  pinctrl: mediatek: fix build for tristate changes
  pinctrl: samsung: Use bank name as irqchip name
  pinctrl: core: print gpio in pins debugfs file
  pinctrl: mediatek: add mt6779 eint support
  pinctrl: mediatek: add pinctrl support for MT6779 SoC
  pinctrl: mediatek: avoid virtual gpio trying to set reg
  pinctrl: mediatek: update pinmux definitions for mt6779
  pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API
  pinctrl: mcp23s08: Use irqchip template
  pinctrl: sx150x: Use irqchip template
  dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes
  pinctrl: intel: Add Intel Emmitsburg pin controller support
  pinctl: ti: iodelay: Replace HTTP links with HTTPS ones
  Revert "gpio: omap: handle pin config bias flags"
  pinctrl: single: Use fallthrough pseudo-keyword
  pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword
  pinctrl: baytrail: Use fallthrough pseudo-keyword
  ...

Pull mtd updates from Miquel Raynal:
 "MTD core changes:
   - Spelling
   - http to https updates

  NAND core changes:
   - Drop useless 'depends on' in Kconfig
   - Add an extra level in the Kconfig hierarchy
   - Trivial spellings
   - Dynamic allocation of the interface configurations
   - Dropping the default ONFI timing mode
   - Various cleanup (types, structures, naming, comments)
   - Hide the chip->data_interface indirection
   - Add the generic rb-gpios property
   - Add the ->choose_interface_config() hook
   - Introduce nand_choose_best_sdr_timings()
   - Use default values for tPROG_max and tBERS_max
   - Avoid redefining tR_max and tCCS_min
   - Add a helper to find the closest ONFI mode
   - bcm63xx MTD parsers: simplify CFE detection

  Raw NAND controller drivers changes:
   - fsl-upm: Deprecation of specific DT properties
   - fsl_upm: Driver rework and cleanup in favor of ->exec_op()
   - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
   - brcmnand: ECC error handling on EDU transfers
   - brcmnand: Don't default to EDU transfers
   - qcom: Set BAM mode only if not set already
   - qcom: Avoid write to unavailable register
   - gpio: Driver rework in favor of ->exec_op()
   - tango: ->exec_op() conversion
   - mtk: ->exec_op() conversion

  Raw NAND chip drivers changes:
   - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4,
     TC58NVG0S3E, and TC58TEG5DCLTA00
   - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC

  SPI NOR core changes:
   - Disable Quad Mode in spi_nor_restore().
   - Don't abort BFPT parsing when QER reserved value is used.
   - Add support/update capabilities for few flashes.
   - Drop s70fl01gs flash: it does not support RDSR(05h) which is
     critical for erase/write.
   - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during
     the release cycle.

  SPI NOR controller drivers changes:
   - Move the cadence-quadspi driver to spi-mem. The series was taken
     through the SPI tree. Merge it also in spi-nor/next to avoid
     conflicts during the release cycle.
   - intel-spi:
      - Add new PCI IDs.
      - Ignore the Write Disable command, the controller doesn't support
        it.
      - Fix performance regression"

* tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits)
  MTD: pfow.h: drop a duplicated word
  MTD: mtd-abi.h: drop a duplicated word
  mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones
  mtd: Replace HTTP links with HTTPS ones
  mtd: hyperbus: Replace HTTP links with HTTPS ones
  mtd: revert "spi-nor: intel: provide a range for poll_timout"
  mtd: spi-nor: update read capabilities for w25q64 and s25fl064k
  mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g
  mtd: spi-nor: macronix: Add support for mx66u2g45g
  mtd: spi-nor: intel-spi: Simulate WRDI command
  mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()
  mtd: spi-nor: Add capability to disable flash quad mode
  mtd: spi-nor: spansion: Remove s70fl01gs from flash_info
  mtd: spi-nor: sfdp: do not make invalid quad enable fatal
  dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags
  mtd: rawnand: stm32_fmc2: get resources from parent node
  mtd: rawnand: stm32_fmc2: use regmap APIs
  memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
  dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation
  dt-bindings: mtd: update STM32 FMC2 NAND controller documentation
  ...

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit d26e9414 ("kbuild: no gcc-plugins during cc-option tests")
was neeeded because scripts/Makefile.gcc-plugins was too early.

This is unneeded by including scripts/Makefile.gcc-plugins last,
and being careful to not add cc-option tests after it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Currently, the top Makefile includes all of scripts/Makefile.<feature>
even if the associated CONFIG option is disabled.

Do not include unneeded Makefiles in order to slightly optimize the
parse stage.

Include $(include-y), and ignore $(include-).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

To build host programs, you need to add the program names to 'hostprogs'
to use the necessary build rule, but it is not enough to build them
because there is no dependency.

There are two types of host programs: built as the prerequisite of
another (e.g. gen_crc32table in lib/Makefile), or always built when
Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile).

The latter is typical in Makefiles under scripts/, which contains host
programs globally used during the kernel build. To build them, you need
to add them to both 'hostprogs' and 'always-y'.

This commit adds hostprogs-always-y as a shorthand.

The same applies to user programs. net/bpfilter/Makefile builds
bpfilter_umh on demand, hence always-y is unneeded. In contrast,
programs under samples/ are added to both 'userprogs' and 'always-y'
so they are always built when Kbuild visits the Makefiles.

userprogs-always-y works as a shorthand.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

The conditional:

  ifneq ($(hostprogs),)

... is evaluated to true if $(hostprogs) does not contain any word but
whitespace characters.

  ifneq ($(strip $(hostprogs)),)

... is a safe way to avoid interpreting whitespace as a non-empty value,
but I'd rather want to use the side-effect of $(sort ...) to do the
equivalent.

$(sort ...) is used in scripts/Makefile.host in order to drop duplication
in $(hostprogs). It is also useful to strip excessive spaces.

Move $(sort ...) before evaluating the ifneq.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The host shared library rules are currently implemented in
scripts/Makefile.host, but actually GCC-plugin is the only user of
them. (The VDSO .so files are built for the target by different
build rules) Hence, they do not need to be treewide available.

Move all the relevant build rules to scripts/gcc-plugins/Makefile.

I also optimized the build steps so *.so is directly built from .c
because every upstream plugin is compiled from a single source file.

I am still keeping the multi-file plugin support, which Kees Cook
mentioned might be needed by out-of-tree plugins.
(https://lkml.org/lkml/2019/1/11/1107)

If the plugin, foo.so, is compiled from two files foo.c and foo2.c,
then you can do like follows:

  foo-objs := foo.o foo2.o

Single-file plugins do not need the *-objs notation.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

ccflags-remove-$(CONFIG_FUNCTION_TRACER) += $(CC_FLAGS_FTRACE)

exists here in sub-directories of lib/ to keep the behavior of
commit 2464a609 ("ftrace: do not trace library functions").

Since that commit, not only the objects in lib/ but also the ones in
the sub-directories are excluded from ftrace (although the commit
description did not explicitly mention this).

However, most of library functions in sub-directories are not so hot.
Re-add them to ftrace.

Going forward, only the objects right under lib/ will be excluded.

Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular
object, but there is no convenient way to do that for every object in
a directory.

Add ccflags-remove-y and asflags-remove-y to make it easily.

Use ccflags-remove-y to clean up some Makefiles.

The add/remove order works as follows:

 [1] KBUILD_CFLAGS specifies compiler flags used globally

 [2] ccflags-y adds compiler flags for all objects in the
     current Makefile

 [3] ccflags-remove-y removes compiler flags for all objects in the
     current Makefile (New feature)

 [4] CFLAGS_<file> adds compiler flags per file.

 [5] CFLAGS_REMOVE_<file> removes compiler flags per file.

Having [3] before [4] allows us to remove flags from most (but not all)
objects in the current Makefile.

For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE)
from all objects in the directory, then adds it back to
trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o

The same applies to lib/livepatch/Makefile.

Please note ccflags-remove-y has no effect to the sub-directories.
In contrast, the previous notation got rid of compiler flags also from
all the sub-directories.

The following are not affected because they have no sub-directories:

  arch/arm/boot/compressed/
  arch/powerpc/xmon/
  arch/sh/
  kernel/trace/

However, lib/ has several sub-directories.

To keep the behavior, I added ccflags-remove-y to all Makefiles
in subdirectories of lib/, except the following:

  lib/vdso/Makefile        - Kbuild does not descend into this Makefile
  lib/raid/test/Makefile   - This is not used for the kernel build

I think commit 2464a609 ("ftrace: do not trace library functions")
excluded too much. In the next commit, I will remove ccflags-remove-y
from the sub-directories of lib/.
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Brendan Higgins <brendanhiggins@google.com> (KUnit)
Tested-by: Anders Roxell <anders.roxell@linaro.org>

When you clean the build tree for ARCH=arm, you may see the following
error message from 'nm' command:

$ make -j24 ARCH=arm clean
  CLEAN   arch/arm/crypto
  CLEAN   arch/arm/kernel
  CLEAN   arch/arm/mach-at91
  CLEAN   arch/arm/mach-omap2
  CLEAN   arch/arm/vdso
  CLEAN   certs
  CLEAN   lib
  CLEAN   usr
  CLEAN   net/wireless
  CLEAN   drivers/firmware/efi/libstub
nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file
/bin/sh: 1: arithmetic expression: expecting primary: " "
  CLEAN   arch/arm/boot/compressed
  CLEAN   drivers/scsi
  CLEAN   drivers/tty/vt
  CLEAN   arch/arm/boot
  CLEAN   vmlinux.symvers modules.builtin modules.builtin.modinfo

Even if you rerun the same command, the error message will not be
shown despite vmlinux is already gone.

To reproduce it, the parallel option -j is needed. Single thread
cleaning always executes 'archclean', 'vmlinuxclean' in this order,
so vmlinux still exists when arch/arm/boot/compressed/ is cleaned.

Looking at arch/arm/boot/compressed/Makefile does not help understand
the reason of the error message. Both KBSS_SZ and LDFLAGS_vmlinux are
assigned with '=' operator, hence, they are not expanded unless used.
Obviously, 'make clean' does not use them.

In fact, the root cause exists in the top Makefile:

  export LDFLAGS_vmlinux

Since LDFLAGS_vmlinux is an exported variable, LDFLAGS_vmlinux in
arch/arm/boot/compressed/Makefile is expanded when scripts/Makefile.clean
has a command to execute. This is why the error message shows up only
when there exist build artifacts in arch/arm/boot/compressed/.

Adding 'unexport LDFLAGS_vmlinux' to arch/arm/boot/compressed/Makefile
will fix it as far as ARCH=arm is concerned, but I think the proper fix
is to get rid of 'export LDFLAGS_vmlinux' from the top Makefile.

LDFLAGS_vmlinux in the top Makefile contains linker flags for the top
vmlinux. LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is for
arch/arm/boot/compressed/vmlinux. They just happen to have the same
variable name, but are used for different purposes. Stop shadowing
LDFLAGS_vmlinux.

This commit passes LDFLAGS_vmlinux to scripts/link-vmlinux.sh via a
command line parameter instead of via an environment variable. LD and
KBUILD_LDFLAGS are exported, but I did the same for consistency. Anyway,
they must be included in cmd_link-vmlinux to allow if_changed to detect
the changes in LD or KBUILD_LDFLAGS.

The following Makefiles are not affected:

  arch/arm/boot/compressed/Makefile
  arch/h8300/boot/compressed/Makefile
  arch/nios2/boot/compressed/Makefile
  arch/parisc/boot/compressed/Makefile
  arch/s390/boot/compressed/Makefile
  arch/sh/boot/compressed/Makefile
  arch/sh/boot/romimage/Makefile
  arch/x86/boot/compressed/Makefile

They use ':=' or '=' to clear the LDFLAGS_vmlinux inherited from the
top Makefile.

We need to take a closer look at the impact to unicore32 and xtensa.

arch/unicore32/boot/compressed/Makefile only uses '+=' operator for
LDFLAGS_vmlinux. So, the decompressor previously inherited the linker
flags from the top Makefile.

However, commit 70fac51f ("unicore32 additional architecture files:
boot process") was merged before commit 1f2bfbd0 ("kbuild: link of
vmlinux moved to a script"). So, I rather consider this is a bug fix of
1f2bfbd0.

arch/xtensa/boot/boot-elf/Makefile is also affected, but this is also
considered a fix for the same reason. It did not inherit LDFLAGS_vmlinux
when commit 4bedea94 ("[PATCH] xtensa: Architecture support for
Tensilica Xtensa Part 2") was merged. I deleted $(LDFLAGS_vmlinux),
which is now empty.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>

Currently, the directories of objects are automatically created
only for O= builds.

It should not hurt to cater to this for in-tree builds too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull arm64 fixes from Catalin Marinas:

 - Fix tegra194-cpufreq module build failure caused by __cpu_logical_map
   not being exported.

 - Improve fixed_addresses comment regarding the fixmap buffer sizes.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix __cpu_logical_map undefined issue
  arm64/fixmap: make notes of fixed_addresses more precisely

The __cpu_logical_map undefined issue occued when the new
tegra194-cpufreq drvier building as a module.

ERROR: modpost: "__cpu_logical_map" [drivers/cpufreq/tegra194-cpufreq.ko] undefined!

The driver using cpu_logical_map() macro which will expand to
__cpu_logical_map, we can't access it in a drvier. Let's turn
cpu_logical_map() into a C wrapper and export it to fix the
build issue.

Also create a function set_cpu_logical_map(cpu, hwid) when assign
a value to cpu_logical_map(cpu).
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

These 'compile-time allocated' memory buffers can occupy more than one
page and each enum increment is page-sized. So improve the note about it.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1596460720-19243-1-git-send-email-kernelfans@gmail.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull IPMI updates from Corey Minyard:
 "Minor cleanups to the IPMI driver for 5.9

  Nothing of any major consequence. Duplicate code, some missing \n's in
  sysfs files, some documentation and comment changes"

* tag 'for-linus-5.9-1' of git://github.com/cminyard/linux-ipmi:
  ipmi/watchdog: add missing newlines when printing parameters by sysfs
  ipmi: remve duplicate code in __ipmi_bmc_register()
  ipmi: ssif: Remove finished TODO comment about SMBus alert
  Doc: driver-api: ipmi: Add description of alerts_broken module param

Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - add COOL/WARM/HOT state from JEITA JISC8712:2015 specification
   - convert simple-battery DT binding to YAML
   - add long-life charging mode

 Battery/charger drivers:
   - bq25150: new charger driver
   - bq27xxx: add support for BQ27z561 and BQ28z610
   - max17040: support CAPACITY_ALERT_MIN
   - sbs-battery: add PEC support
   - wilco-ec: support long-life charging mode
   - bq25890: fix DT binding
   - misc. fixes and cleanups

 Reset drivers:
   - linkstation: new reset driver"

* tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
  power: supply: wilco_ec: Add long life charging mode
  power: supply: bq27xxx_battery: Add the BQ28z610 Battery monitor
  dt-bindings: power: Add BQ28z610 compatible
  power: supply: bq27xxx_battery: Add the BQ27Z561 Battery monitor
  dt-bindings: power: Add BQ27Z561 compatible
  power: supply: test_power: Fix battery_current initial value
  power: supply: Fix kerneldoc of power_supply_temp2resist_simple()
  power: supply: cpcap-battery: Fix kerneldoc of cpcap_battery_read_accumulated()
  dt-bindings: power: Convert battery.txt to battery.yaml
  power: supply: rt5033_battery: Fix error code in rt5033_battery_probe()
  power: supply: max17040: Add POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN
  power: supply: check if calc_soc succeeded in pm860x_init_battery
  power: supply: bq2xxxx: Replace HTTP links with HTTPS ones
  power: reset: add driver for LinkStation power off
  power: supply: sc27xx: prevent adc * 1000 from overflow
  math64: New DIV_S64_ROUND_CLOSEST helper
  power: fix duplicated words in bq2415x_charger.h
  power: Convert to DEFINE_SHOW_ATTRIBUTE
  power: reset: keystone-reset: Replace HTTP links with HTTPS ones
  power: supply: bq25150 introduce the bq25150
  ...

Pull misc vfs updates from Al Viro:
 "No common topic whatsoever in those, sorry"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: define inode flags using bit numbers
  iov_iter: Move unnecessary inclusion of crypto/hash.h
  dlmfs: clean up dlmfs_file_{read,write}() a bit

Pull mount leak fix from Al Viro:
 "Regression fix for the syscalls-for-init series - fix a leak of a 'struct path'"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: fix a struct path leak in path_umount

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas)
   - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi
     Saheed)
   - Align PCIe capability and PCI accessor return values (Bolarinwa
     Olayemi Saheed)
   - Fix pci_create_slot() reference count leak (Qiushi Wu)
   - Announce device after early fixups (Tiezhu Yang)

  PCI device hotplug:
   - Make rpadlpar functions static (Wei Yongjun)

  Driver binding:
   - Add device even if driver attach failed (Rajat Jain)

  Virtualization:
   - xen: Remove redundant initialization of irq (Colin Ian King)

  IOMMU:
   - Add pci_pri_supported() to check device or associated PF (Ashok Raj)
   - Release IVRS table in AMD ACS quirk (Hanjun Guo)
   - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng)
   - Treat "external-facing" devices themselves as internal (Rajat Jain)

  MSI:
   - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr
     Stankiewicz)

  Error handling:
   - Clear PCIe Device Status errors only if OS owns AER (Jonathan
     Cameron)
   - Log correctable errors as warning, not error (Matt Jolly)
   - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc
     Van Oostenryck)

  Peer-to-peer DMA:
   - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe)

  ASPM:
   - Add missing newline in sysfs 'policy' (Xiongfeng Wang)

  Native PCIe controllers:
   - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng)
   - Convert to devm_platform_ioremap_resource() (Dejin Zheng)
   - Remove duplicate error message from devm_pci_remap_cfg_resource()
     callers (Dejin Zheng)
   - Fix runtime PM imbalance on error (Dinghao Liu)
   - Remove dev_err() when handing an error from platform_get_irq()
     (Krzysztof Wilczyński)
   - Use pci_host_bridge.windows list directly instead of splicing in a
     temporary list for cadence, mvebu, host-common (Rob Herring)
   - Use pci_host_probe() instead of open-coding all the pieces for
     altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3,
     versatile, xgene, xilinx, xilinx-nwl (Rob Herring)
   - Default host bridge parent device to the platform device (Rob
     Herring)
   - Use pci_is_root_bus() instead of tracking root bus number
     separately in aardvark, designware (imx6, keystone,
     designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob
     Herring)
   - Set host bridge bus number in pci_scan_root_bus_bridge() instead of
     each driver for aardvark, designware-host, host-common, mediatek,
     rcar, tegra, v3-semi (Rob Herring)
   - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob
     Herring)
   - Set bridge map_irq and swizzle_irq to default functions; drivers
     that don't support legacy IRQs (iproc) need to undo this (Rob
     Herring)

  ARM Versatile PCIe controller driver:
   - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring)

  Cadence PCIe controller driver:
   - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property
     (Kishon Vijay Abraham I)
   - Remove "mem" from reg binding (Kishon Vijay Abraham I)
   - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I)
   - Convert all r/w accessors to perform only 32-bit accesses (Kishon
     Vijay Abraham I)
   - Add support to start link and verify link status (Kishon Vijay
     Abraham I)
   - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I)
   - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I)
   - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon
     Vijay Abraham I)
   - Use bridge resources for outbound window setup (Rob Herring)
   - Remove private bus number and range storage (Rob Herring)

  Cadence PCIe endpoint driver:
   - Add MSI-X support (Alan Douglas)

  HiSilicon PCIe controller driver:
   - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring)

  Intel VMD host bridge driver:
   - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick)

  Loongson PCIe controller driver:
   - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang)

  Marvell Aardvark PCIe controller driver:
   - Indicate error in 'val' when config read fails (Pali Rohár)
   - Don't touch PCIe registers if no card connected (Pali Rohár)

  Marvell MVEBU PCIe controller driver:
   - Setup BAR0 in order to fix MSI (Shmuel Hazan)

  Microsoft Hyper-V host bridge driver:
   - Fix a timing issue which causes kdump to fail occasionally (Wei Hu)
   - Make some functions static (Wei Yongjun)

  NVIDIA Tegra PCIe controller driver:
   - Revert tegra124 raw_violation_fixup (Nicolas Chauvet)
   - Remove PLL power supplies (Thierry Reding)

  Qualcomm PCIe controller driver:
   - Change duplicate PCI reset to phy reset (Abhishek Sahu)
   - Add missing ipq806x clocks in PCIe driver (Ansuel Smith)
   - Add missing reset for ipq806x (Ansuel Smith)
   - Add ext reset (Ansuel Smith)
   - Use bulk clk API and assert on error (Ansuel Smith)
   - Add support for tx term offset for rev 2.1.0 (Ansuel Smith)
   - Define some PARF params needed for ipq8064 SoC (Ansuel Smith)
   - Add ipq8064 rev2 variant (Ansuel Smith)
   - Support PCI speed set for ipq806x (Sham Muthayyan)

  Renesas R-Car PCIe controller driver:
   - Use devm_pci_alloc_host_bridge() (Rob Herring)
   - Use struct pci_host_bridge.windows list directly (Rob Herring)
   - Convert rcar-gen2 to use modern host bridge probe functions (Rob
     Herring)

  TI J721E PCIe driver:
   - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I)

  Xilinx Versal CPM PCIe controller driver:
   - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar
     Gogada)

  MicroSemi Switchtec management driver:
   - Add missing __iomem and __user tags to fix sparse warnings (Logan
     Gunthorpe)

  Miscellaneous:
   - Replace http:// links with https:// (Alexander A. Klimov)
   - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn
     Helgaas)
   - Remove unused pci_lost_interrupt() (Heiner Kallweit)
   - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen)
   - Fix kerneldoc warnings (Krzysztof Kozlowski)"

* tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
  PCI: Fix kerneldoc warnings
  PCI: xilinx-cpm: Add Versal CPM Root Port driver
  PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port
  PCI: Set bridge map_irq and swizzle_irq to default functions
  PCI: Move DT resource setup into devm_pci_alloc_host_bridge()
  PCI: rcar-gen2: Convert to use modern host bridge probe functions
  PCI: Remove dev_err() when handing an error from platform_get_irq()
  MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
  misc: pci_endpoint_test: Add J721E in pci_device_id table
  PCI: j721e: Add TI J721E PCIe driver
  PCI: switchtec: Add missing __iomem tag to fix sparse warnings
  PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings
  PCI: rpadlpar: Make functions static
  PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs
  PCI: Release IVRS table in AMD ACS quirk
  PCI: Announce device after early fixups
  PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken
  PCI: Remove unused pci_lost_interrupt()
  dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
  dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
  ...

Pull tracing updates from Steven Rostedt:

 - The biggest news in that the tracing ring buffer can now time events
   that interrupted other ring buffer events.

   Before this change, if an interrupt came in while recording another
   event, and that interrupt also had an event, those events would all
   have the same time stamp as the event it interrupted.

   Now, with the new design, those events will have a unique time stamp
   and rightfully display the time for those events that were recorded
   while interrupting another event.

 - Bootconfig how has an "override" operator that lets the users have a
   default config, but then add options to override the default.

 - A fix was made to properly filter function graph tracing to the
   ftrace PIDs. This came in at the end of the -rc cycle, and needs to
   be backported.

 - Several clean ups, performance updates, and minor fixes as well.

* tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (39 commits)
  tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers
  kprobes: Fix compiler warning for !CONFIG_KPROBES_ON_FTRACE
  tracing: Use trace_sched_process_free() instead of exit() for pid tracing
  bootconfig: Fix to find the initargs correctly
  Documentation: bootconfig: Add bootconfig override operator
  tools/bootconfig: Add testcases for value override operator
  lib/bootconfig: Add override operator support
  kprobes: Remove show_registers() function prototype
  tracing/uprobe: Remove dead code in trace_uprobe_register()
  kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler
  ftrace: Fix ftrace_trace_task return value
  tracepoint: Use __used attribute definitions from compiler_attributes.h
  tracepoint: Mark __tracepoint_string's __used
  trace : Have tracing buffer info use kvzalloc instead of kzalloc
  tracing: Remove outdated comment in stack handling
  ftrace: Do not let direct or IPMODIFY ftrace_ops be added to module and set trampolines
  ftrace: Setup correct FTRACE_FL_REGS flags for module
  tracing/hwlat: Honor the tracing_cpumask
  tracing/hwlat: Drop the duplicate assignment in start_kthread()
  tracing: Save one trace_event->type by using __TRACE_LAST_TYPE
  ...

The merge resolution in commit 25d8d4ee left ret no longer used,
leading to:

  arch/powerpc/kernel/ptrace/ptrace-view.c: In function ‘pkey_get’:
  arch/powerpc/kernel/ptrace/ptrace-view.c:473:6: error: unused variable ‘ret’
    473 |  int ret;

Fix it by removing ret.

Fixes: 25d8d4ee ("Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make sure we also put the dentry and vfsmnt in the illegal flags
and !may_umount cases.

Fixes: 41525f56 ("fs: refactor ksys_umount")
Reported-by: Vikas Kumar <vikas.kumar2@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>