- 26 Jan, 2017 19 commits
-
-
Jussi Laako authored
commit 995c6a7f upstream. Sampling rate changes after first set one are not reflected to the hardware, while driver and ALSA think the rate has been changed. Fix the problem by properly stopping the interface at the beginning of prepare call, allowing new rate to be set to the hardware. This keeps the hardware in sync with the driver. Signed-off-by:
Jussi Laako <jussi@sonarnerd.net> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Con Kolivas authored
commit 82ffb6fc upstream. The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the following warning. [ 6.778995] usb 2-1.2.2.2: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. [ 6.778996] usb 2-1.2.2.2: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1 Adding it to the list of devices in volume_control_quirks makes it work properly, fixing related typo. Signed-off-by:
Con Kolivas <kernel@kolivas.org> Signed-off-by:
-
Alan Stern authored
commit ccdb6be9 upstream. The UHCI controllers in Intel chipsets rely on a platform-specific non-PME mechanism for wakeup signalling. They can generate wakeup signals even though they don't support PME. We need to let the USB core know this so that it will enable runtime suspend for UHCI controllers. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Felipe Balbi authored
commit e8f29bb7 upstream. usb_endpoint_maxp() returns wMaxPacketSize in its raw form. Without taking into consideration that it also contains other bits reserved for isochronous endpoints. This patch fixes one occasion where this is a problem by making sure that we initialize ep->maxpacket only with lower 10 bits of the value returned by usb_endpoint_maxp(). Note that seperate patches will be necessary to audit all call sites of usb_endpoint_maxp() and make sure that usb_endpoint_maxp() only returns lower 10 bits of wMaxPacketSize. Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 37be6676 upstream. USB-3 does not have any link state that will avoid negotiating a connection with a plugged-in cable but will signal the host when the cable is unplugged. For USB-3 we used to first set the link to Disabled, then to RxDdetect to be able to detect cable connects or disconnects. But in RxDetect the connected device is detected again and eventually enabled. Instead set the link into U3 and disable remote wakeups for the device. This is what Windows does, and what Alan Stern suggested. Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Nathaniel Quillin authored
commit 30121604 upstream. Add device-id entry for GW Instek AFG-125, which has a byte swapped bInterfaceSubClass (0x20). Signed-off-by:
Nathaniel Quillin <ndq@google.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Johan Hovold authored
commit 6774d5f5 upstream. Kill urbs and disable read before returning from open on failure to retrieve the line state. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Giuseppe Lippolis authored
commit d8a12b71 upstream. Adding registration for 3G modem DWM-158 in usb-serial-option Signed-off-by:
Giuseppe Lippolis <giu.lippolis@gmail.com> Signed-off-by:
-
Daniele Palmas authored
commit 5b09eff0 upstream. This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A. Since the interface positions are the same than the ones used for other Telit compositions, previous defined blacklists are used. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Robbie Ko authored
commit 2a7bf53f upstream. If a log tree has a layout like the following: leaf N: ... item 240 key (282 DIR_LOG_ITEM 0) itemoff 8189 itemsize 8 dir log end 1275809046 leaf N + 1: item 0 key (282 DIR_LOG_ITEM 3936149215) itemoff 16275 itemsize 8 dir log end 18446744073709551615 ... When we pass the value 1275809046 + 1 as the parameter start_ret to the function tree-log.c:find_dir_range() (done by replay_dir_deletes()), we end up with path->slots[0] having the value 239 (points to the last item of leaf N, item 240). Because the dir log item in that position has an offset value smaller than *start_ret (1275809046 + 1) we need to move on to the next leaf, however the logic for that is wrong since it compares the current slot to the number of items in the leaf, which is smaller and therefore we don't lookup for the next leaf but instead we set the slot to point to an item that does not exist, at slot 240, and we later operate on that slot which has unexpected content or in the worst case can result in an invalid memory access (accessing beyond the last page of leaf N's extent buffer). So fix the logic that checks when we need to lookup at the next leaf by first incrementing the slot and only after to check if that slot is beyond the last item of the current leaf. Signed-off-by:
Robbie Ko <robbieko@synology.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> Fixes: e02119d5 (Btrfs: Add a write ahead tree log to optimize synchronous operations) Signed-off-by:
-
Jeff Mahoney authored
This reverts commit 644d1071, upstream commit 6f896054. The original patch for mainline, 6f896054 (Btrfs: don't delay inode ref updates during log replay) lists 1d52c78a (Btrfs: try not to ENOSPC on log replay) as the only pre-3.18 dependency, but it also depends on 67de1176 (Btrfs: introduce the delayed inode ref deletion for the single link inode), which was introduced in 3.14 and isn't in 3.12.y. The -stable commit added the check to btrfs_delayed_update_inode, which may look similar to btrfs_delayed_delete_inode_ref, but it's only superficial. The tops of both functions handle typical delayed node boilerplate. The upshot is that the patch is harmless since the caller already checks to see if we're doing log recovery, so we're not breaking anything. It should be reverted because it makes it appear as if this issue was fixed for users who did backport 67de1176, when it is not. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Michal Hocko authored
commit 777c6e0d upstream. Yu Zhao has noticed that __unregister_cpu_notifier only unregisters its notifiers when HOTPLUG_CPU=y while the registration might succeed even when HOTPLUG_CPU=n if MODULE is enabled. This means that e.g. zswap might keep a stale notifier on the list on the manual clean up during the pool tear down and thus corrupt the list. Resulting in the following [ 144.964346] BUG: unable to handle kernel paging request at ffff880658a2be78 [ 144.971337] IP: [<ffffffffa290b00b>] raw_notifier_chain_register+0x1b/0x40 <snipped> [ 145.122628] Call Trace: [ 145.125086] [<ffffffffa28e5cf8>] __register_cpu_notifier+0x18/0x20 [ 145.131350] [<ffffffffa2a5dd73>] zswap_pool_create+0x273/0x400 [ 145.137268] [<ffffffffa2a5e0fc>] __zswap_param_set+0x1fc/0x300 [ 145.143188] [<ffffffffa2944c1d>] ? trace_hardirqs_on+0xd/0x10 [ 145.149018] [<ffffffffa2908798>] ? kernel_param_lock+0x28/0x30 [ 145.154940] [<ffffffffa2a3e8cf>] ? __might_fault+0x4f/0xa0 [ 145.160511] [<ffffffffa2a5e237>] zswap_compressor_param_set+0x17/0x20 [ 145.167035] [<ffffffffa2908d3c>] param_attr_store+0x5c/0xb0 [ 145.172694] [<ffffffffa290848d>] module_attr_store+0x1d/0x30 [ 145.178443] [<ffffffffa2b2b41f>] sysfs_kf_write+0x4f/0x70 [ 145.183925] [<ffffffffa2b2a5b9>] kernfs_fop_write+0x149/0x180 [ 145.189761] [<ffffffffa2a99248>] __vfs_write+0x18/0x40 [ 145.194982] [<ffffffffa2a9a412>] vfs_write+0xb2/0x1a0 [ 145.200122] [<ffffffffa2a9a732>] SyS_write+0x52/0xa0 [ 145.205177] [<ffffffffa2ff4d97>] entry_SYSCALL_64_fastpath+0x12/0x17 This can be even triggered manually by changing /sys/module/zswap/parameters/compressor multiple times. Fix this issue by making unregister APIs symmetric to the register so there are no surprises. [js] backport to 3.12 Fixes: 47e627bc ("[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if !CONFIG_HOTPLUG_CPU") Reported-and-tested-by:
Yu Zhao <yuzhao@google.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Cc: linux-mm@kvack.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Streetman <ddstreet@ieee.org> Link: http://lkml.kernel.org/r/20161207135438.4310-1-mhocko@kernel.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Boris Brezillon authored
commit 7e251bb2 upstream. The current ndelay() macro definition has an extra semi-colon at the end of the line thus leading to a compilation error when ndelay is used in a conditional block without curly braces like this one: if (cond) ndelay(t); else ... which, after the preprocessor pass gives: if (cond) m68k_ndelay(t);; else ... thus leading to the following gcc error: error: 'else' without a previous 'if' Remove this extra semi-colon. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: c8ee038b ("m68k: Implement ndelay() based on the existing udelay() logic") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
추지호 authored
commit b67d0dd7 upstream. Fix for bad memory access while disconnecting. netdev is freed before private data free, and dev is accessed after freeing netdev. This makes a slub problem, and it raise kernel oops with slub debugger config. Signed-off-by:
Jiho Chu <jiho.chu@samsung.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Marc Kleine-Budde authored
commit 332b05ca upstream. This patch adds a check to limit the number of can_filters that can be set via setsockopt on CAN_RAW sockets. Otherwise allocations > MAX_ORDER are not prevented resulting in a warning. Reference: https://lkml.org/lkml/2016/12/2/230Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
-
Peter Zijlstra (Intel) authored
commit 7f612a7f upstream. Lukasz reported that perf stat counters overflow handling is broken on KNL/SLM. Both these parts have full_width_write set, and that does indeed have a problem. In order to deal with counter wrap, we must sample the counter at at least half the counter period (see also the sampling theorem) such that we can unambiguously reconstruct the count. However commit: 069e0c3c ("perf/x86/intel: Support full width counting") sets the sampling interval to the full period, not half. Fixing that exposes another issue, in that we must not sign extend the delta value when we shift it right; the counter cannot have decremented after all. With both these issues fixed, counter overflow functions correctly again. Reported-by:
Lukasz Odzioba <lukasz.odzioba@intel.com> Tested-by:
Liang, Kan <kan.liang@intel.com> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 069e0c3c ("perf/x86/intel: Support full width counting") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Thomas Gleixner authored
commit 1be5d4fa upstream. While debugging the rtmutex unlock vs. dequeue race Will suggested to use READ_ONCE() in rt_mutex_owner() as it might race against the cmpxchg_release() in unlock_rt_mutex_safe(). Will: "It's a minor thing which will most likely not matter in practice" Careful search did not unearth an actual problem in todays code, but it's better to be safe than surprised. Suggested-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Thomas Gleixner authored
commit dbb26055 upstream. David reported a futex/rtmutex state corruption. It's caused by the following problem: CPU0 CPU1 CPU2 l->owner=T1 rt_mutex_lock(l) lock(l->wait_lock) l->owner = T1 | HAS_WAITERS; enqueue(T2) boost() unlock(l->wait_lock) schedule() rt_mutex_lock(l) lock(l->wait_lock) l->owner = T1 | HAS_WAITERS; enqueue(T3) boost() unlock(l->wait_lock) schedule() signal(->T2) signal(->T3) lock(l->wait_lock) dequeue(T2) deboost() unlock(l->wait_lock) lock(l->wait_lock) dequeue(T3) ===> wait list is now empty deboost() unlock(l->wait_lock) lock(l->wait_lock) fixup_rt_mutex_waiters() if (wait_list_empty(l)) { owner = l->owner & ~HAS_WAITERS; l->owner = owner ==> l->owner = T1 } lock(l->wait_lock) rt_mutex_unlock(l) fixup_rt_mutex_waiters() if (wait_list_empty(l)) { owner = l->owner & ~HAS_WAITERS; cmpxchg(l->owner, T1, NULL) ===> Success (l->owner = NULL) l->owner = owner ==> l->owner = T1 } That means the problem is caused by fixup_rt_mutex_waiters() which does the RMW to clear the waiters bit unconditionally when there are no waiters in the rtmutexes rbtree. This can be fatal: A concurrent unlock can release the rtmutex in the fastpath because the waiters bit is not set. If the cmpxchg() gets in the middle of the RMW operation then the previous owner, which just unlocked the rtmutex is set as the owner again when the write takes place after the successfull cmpxchg(). The solution is rather trivial: verify that the owner member of the rtmutex has the waiters bit set before clearing it. This does not require a cmpxchg() or other atomic operations because the waiters bit can only be set and cleared with the rtmutex wait_lock held. It's also safe against the fast path unlock attempt. The unlock attempt via cmpxchg() will either see the bit set and take the slowpath or see the bit cleared and release it atomically in the fastpath. It's remarkable that the test program provided by David triggers on ARM64 and MIPS64 really quick, but it refuses to reproduce on x86-64, while the problem exists there as well. That refusal might explain that this got not discovered earlier despite the bug existing from day one of the rtmutex implementation more than 10 years ago. Thanks to David for meticulously instrumenting the code and providing the information which allowed to decode this subtle problem. Reported-by:
David Daney <ddaney@caviumnetworks.com> Tested-by:
David Daney <david.daney@cavium.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
-
Jan Kara authored
commit 06bd3c36 upstream. Huang has reported that in his powerfail testing he is seeing stale block contents in some of recently allocated blocks although he mounts ext4 in data=ordered mode. After some investigation I have found out that indeed when delayed allocation is used, we don't add inode to transaction's list of inodes needing flushing before commit. Originally we were doing that but commit f3b59291 removed the logic with a flawed argument that it is not needed. The problem is that although for delayed allocated blocks we write their contents immediately after allocating them, there is no guarantee that the IO scheduler or device doesn't reorder things and thus transaction allocating blocks and attaching them to inode can reach stable storage before actual block contents. Actually whenever we attach freshly allocated blocks to inode using a written extent, we should add inode to transaction's ordered inode list to make sure we properly wait for block contents to be written before committing the transaction. So that is what we do in this patch. This also handles other cases where stale data exposure was possible - like filling hole via mmap in data=ordered,nodelalloc mode. The only exception to the above rule are extending direct IO writes where blkdev_direct_IO() waits for IO to complete before increasing i_size and thus stale data exposure is not possible. For now we don't complicate the code with optimizing this special case since the overhead is pretty low. In case this is observed to be a performance problem we can always handle it using a special flag to ext4_map_blocks(). Fixes: f3b59291Reported-by:
"HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com> Tested-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
- 15 Dec, 2016 2 commits
-
-
Ming Lei authored
commit cebf8fd1 upstream. The global mutex of 'gdp_mutex' is used to serialize creating/querying glue dir and its cleanup. Turns out it isn't a perfect way because part(kobj_kset_leave()) of the actual cleanup action() is done inside the release handler of the glue dir kobject. That means gdp_mutex has to be held before releasing the last reference count of the glue dir kobject. This patch moves glue dir's cleanup after kobject_del() in device_del() for avoiding the race. Cc: Yijing Wang <wangyijing@huawei.com> Reported-by:
Chandra Sekhar Lingutla <clingutla@codeaurora.org> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
Markus Elfring authored
commit 5f0163a5 upstream. The put_device() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
- 13 Dec, 2016 13 commits
-
-
Jiri Slaby authored
-
Thomas Tai authored
[ Upstream commit 87a349f9 ] A compile warning is introduced by a commit to fix the find_node(). This patch fix the compile warning by moving find_node() into __init section. Because find_node() is only used by memblock_nid_range() which is only used by a __init add_node_ranges(). find_node() and memblock_nid_range() should also be inside __init section. Signed-off-by:
Thomas Tai <thomas.tai@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Thomas Tai authored
[ Upstream commit 74a5ed5c ] When booting up LDOM, find_node() warns that a physical address doesn't match a NUMA node. WARNING: CPU: 0 PID: 0 at arch/sparc/mm/init_64.c:835 find_node+0xf4/0x120 find_node: A physical address doesn't match a NUMA node rule. Some physical memory will be owned by node 0.Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.0-rc3 #4 Call Trace: [0000000000468ba0] __warn+0xc0/0xe0 [0000000000468c74] warn_slowpath_fmt+0x34/0x60 [00000000004592f4] find_node+0xf4/0x120 [0000000000dd0774] add_node_ranges+0x38/0xe4 [0000000000dd0b1c] numa_parse_mdesc+0x268/0x2e4 [0000000000dd0e9c] bootmem_init+0xb8/0x160 [0000000000dd174c] paging_init+0x808/0x8fc [0000000000dcb0d0] setup_arch+0x2c8/0x2f0 [0000000000dc68a0] start_kernel+0x48/0x424 [0000000000dcb374] start_early_boot+0x27c/0x28c [0000000000a32c08] tlb_fixup_done+0x4c/0x64 [0000000000027f08] 0x27f08 It is because linux use an internal structure node_masks[] to keep the best memory latency node only. However, LDOM mdesc can contain single latency-group with multiple memory latency nodes. If the address doesn't match the best latency node within node_masks[], it should check for an alternative via mdesc. The warning message should only be printed if the address doesn't match any node_masks[] nor within mdesc. To minimize the impact of searching mdesc every time, the last matched mask and index is stored in a variable. Signed-off-by:
Chris Hyser <chris.hyser@oracle.com> Reviewed-by:
Liam Merwick <liam.merwick@oracle.com> Signed-off-by:
-
Andreas Larsson authored
[ Upstream commit 07b5ab3f ] Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
-
Kees Cook authored
[ Upstream commit 0eab121e ] Prior to commit c0371da6 ("put iov_iter into msghdr") in v3.19, there was no check that the iovec contained enough bytes for an ICMP header, and the read loop would walk across neighboring stack contents. Since the iov_iter conversion, bad arguments are noticed, but the returned error is EFAULT. Returning EINVAL is a clearer error and also solves the problem prior to v3.19. This was found using trinity with KASAN on v3.18: BUG: KASAN: stack-out-of-bounds in memcpy_fromiovec+0x60/0x114 at addr ffffffc071077da0 Read of size 8 by task trinity-c2/9623 page:ffffffbe034b9a08 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x0() page dumped because: kasan: bad access detected CPU: 0 PID: 9623 Comm: trinity-c2 Tainted: G BU 3.18.0-dirty #15 Hardware name: Google Tegra210 Smaug Rev 1,3+ (DT) Call trace: [<ffffffc000209c98>] dump_backtrace+0x0/0x1ac arch/arm64/kernel/traps.c:90 [<ffffffc000209e54>] show_stack+0x10/0x1c arch/arm64/kernel/traps.c:171 [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffc000f18dc4>] dump_stack+0x7c/0xd0 lib/dump_stack.c:50 [< inline >] print_address_description mm/kasan/report.c:147 [< inline >] kasan_report_error mm/kasan/report.c:236 [<ffffffc000373dcc>] kasan_report+0x380/0x4b8 mm/kasan/report.c:259 [< inline >] check_memory_region mm/kasan/kasan.c:264 [<ffffffc00037352c>] __asan_load8+0x20/0x70 mm/kasan/kasan.c:507 [<ffffffc0005b9624>] memcpy_fromiovec+0x5c/0x114 lib/iovec.c:15 [< inline >] memcpy_from_msg include/linux/skbuff.h:2667 [<ffffffc000ddeba0>] ping_common_sendmsg+0x50/0x108 net/ipv4/ping.c:674 [<ffffffc000dded30>] ping_v4_sendmsg+0xd8/0x698 net/ipv4/ping.c:714 [<ffffffc000dc91dc>] inet_sendmsg+0xe0/0x12c net/ipv4/af_inet.c:749 [< inline >] __sock_sendmsg_nosec net/socket.c:624 [< inline >] __sock_sendmsg net/socket.c:632 [<ffffffc000cab61c>] sock_sendmsg+0x124/0x164 net/socket.c:643 [< inline >] SYSC_sendto net/socket.c:1797 [<ffffffc000cad270>] SyS_sendto+0x178/0x1d8 net/socket.c:1761 CVE-2016-8399 Reported-by:
Qidan He <i@flanker017.me> Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b98b0bc8 ] CAP_NET_ADMIN users should not be allowed to set negative sk_sndbuf or sk_rcvbuf values, as it can lead to various memory corruptions, crashes, OOM... Note that before commit 82981930 ("net: cleanups in sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF and SO_RCVBUF were vulnerable. This needs to be backported to all known linux kernels. Again, many thanks to syzkaller team for discovering this gem. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
-
Philip Pettersson authored
[ Upstream commit 84ac7260 ] When packet_set_ring creates a ring buffer it will initialize a struct timer_list if the packet version is TPACKET_V3. This value can then be raced by a different thread calling setsockopt to set the version to TPACKET_V1 before packet_set_ring has finished. This leads to a use-after-free on a function pointer in the struct timer_list when the socket is closed as the previously initialized timer will not be deleted. The bug is fixed by taking lock_sock(sk) in packet_setsockopt when changing the packet version while also taking the lock at the start of packet_set_ring. Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by:
Philip Pettersson <philip.pettersson@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 648f0c28 ] pskb_may_pull() can reallocate skb->head, we need to reload dh pointer in dccp_invalid_packet() or risk use after free. Bug found by Andrey Konovalov using syzkaller. Signed-off-by:
-
Amir Vadai authored
[ Upstream commit 95c2027b ] Add a validation function to make sure offset is valid: 1. Not below skb head (could happen when offset is negative). 2. Validate both 'offset' and 'at'. Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 32c23116 ] Lock socket before checking the SOCK_ZAPPED flag in l2tp_ip6_bind(). Without lock, a concurrent call could modify the socket flags between the sock_flag(sk, SOCK_ZAPPED) test and the lock_sock() call. This way, a socket could be inserted twice in l2tp_ip6_bind_table. Releasing it would then leave a stale pointer there, generating use-after-free errors when walking through the list or modifying adjacent entries. BUG: KASAN: use-after-free in l2tp_ip6_close+0x22e/0x290 at addr ffff8800081b0ed8 Write of size 8 by task syz-executor/10987 CPU: 0 PID: 10987 Comm: syz-executor Not tainted 4.8.0+ #39 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 ffff880031d97838 ffffffff829f835b ffff88001b5a1640 ffff8800081b0ec0 ffff8800081b15a0 ffff8800081b6d20 ffff880031d97860 ffffffff8174d3cc ffff880031d978f0 ffff8800081b0e80 ffff88001b5a1640 ffff880031d978e0 Call Trace: [<ffffffff829f835b>] dump_stack+0xb3/0x118 lib/dump_stack.c:15 [<ffffffff8174d3cc>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 [< inline >] print_address_description mm/kasan/report.c:194 [<ffffffff8174d666>] kasan_report_error+0x1f6/0x4d0 mm/kasan/report.c:283 [< inline >] kasan_report mm/kasan/report.c:303 [<ffffffff8174db7e>] __asan_report_store8_noabort+0x3e/0x40 mm/kasan/report.c:329 [< inline >] __write_once_size ./include/linux/compiler.h:249 [< inline >] __hlist_del ./include/linux/list.h:622 [< inline >] hlist_del_init ./include/linux/list.h:637 [<ffffffff8579047e>] l2tp_ip6_close+0x22e/0x290 net/l2tp/l2tp_ip6.c:239 [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570 [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017 [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208 [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244 [<ffffffff813774f9>] task_work_run+0xf9/0x170 [<ffffffff81324aae>] do_exit+0x85e/0x2a00 [<ffffffff81326dc8>] do_group_exit+0x108/0x330 [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307 [<ffffffff811b49af>] do_signal+0x7f/0x18f0 [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Object at ffff8800081b0ec0, in cache L2TP/IPv6 size: 1448 Allocated: PID = 10987 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0 [ 1116.897025] [<ffffffff8174c9ad>] kasan_kmalloc+0xad/0xe0 [ 1116.897025] [<ffffffff8174cee2>] kasan_slab_alloc+0x12/0x20 [ 1116.897025] [< inline >] slab_post_alloc_hook mm/slab.h:417 [ 1116.897025] [< inline >] slab_alloc_node mm/slub.c:2708 [ 1116.897025] [< inline >] slab_alloc mm/slub.c:2716 [ 1116.897025] [<ffffffff817476a8>] kmem_cache_alloc+0xc8/0x2b0 mm/slub.c:2721 [ 1116.897025] [<ffffffff84c4f6a9>] sk_prot_alloc+0x69/0x2b0 net/core/sock.c:1326 [ 1116.897025] [<ffffffff84c58ac8>] sk_alloc+0x38/0xae0 net/core/sock.c:1388 [ 1116.897025] [<ffffffff851ddf67>] inet6_create+0x2d7/0x1000 net/ipv6/af_inet6.c:182 [ 1116.897025] [<ffffffff84c4af7b>] __sock_create+0x37b/0x640 net/socket.c:1153 [ 1116.897025] [< inline >] sock_create net/socket.c:1193 [ 1116.897025] [< inline >] SYSC_socket net/socket.c:1223 [ 1116.897025] [<ffffffff84c4b46f>] SyS_socket+0xef/0x1b0 net/socket.c:1203 [ 1116.897025] [<ffffffff85e4d685>] entry_SYSCALL_64_fastpath+0x23/0xc6 Freed: PID = 10987 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0 [ 1116.897025] [<ffffffff8174cf61>] kasan_slab_free+0x71/0xb0 [ 1116.897025] [< inline >] slab_free_hook mm/slub.c:1352 [ 1116.897025] [< inline >] slab_free_freelist_hook mm/slub.c:1374 [ 1116.897025] [< inline >] slab_free mm/slub.c:2951 [ 1116.897025] [<ffffffff81748b28>] kmem_cache_free+0xc8/0x330 mm/slub.c:2973 [ 1116.897025] [< inline >] sk_prot_free net/core/sock.c:1369 [ 1116.897025] [<ffffffff84c541eb>] __sk_destruct+0x32b/0x4f0 net/core/sock.c:1444 [ 1116.897025] [<ffffffff84c5aca4>] sk_destruct+0x44/0x80 net/core/sock.c:1452 [ 1116.897025] [<ffffffff84c5ad33>] __sk_free+0x53/0x220 net/core/sock.c:1460 [ 1116.897025] [<ffffffff84c5af23>] sk_free+0x23/0x30 net/core/sock.c:1471 [ 1116.897025] [<ffffffff84c5cb6c>] sk_common_release+0x28c/0x3e0 ./include/net/sock.h:1589 [ 1116.897025] [<ffffffff8579044e>] l2tp_ip6_close+0x1fe/0x290 net/l2tp/l2tp_ip6.c:243 [ 1116.897025] [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [ 1116.897025] [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [ 1116.897025] [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570 [ 1116.897025] [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017 [ 1116.897025] [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208 [ 1116.897025] [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244 [ 1116.897025] [<ffffffff813774f9>] task_work_run+0xf9/0x170 [ 1116.897025] [<ffffffff81324aae>] do_exit+0x85e/0x2a00 [ 1116.897025] [<ffffffff81326dc8>] do_group_exit+0x108/0x330 [ 1116.897025] [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307 [ 1116.897025] [<ffffffff811b49af>] do_signal+0x7f/0x18f0 [ 1116.897025] [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [ 1116.897025] [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [ 1116.897025] [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [ 1116.897025] [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Memory state around the buggy address: ffff8800081b0d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800081b0e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8800081b0e80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8800081b0f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8800081b0f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== The same issue exists with l2tp_ip_bind() and l2tp_ip_bind_table. Fixes: c51ce497 ("l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case") Reported-by:
Baozeng Ding <sploving1@gmail.com> Reported-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Jeremy Linton authored
[ Upstream commit 06ba3b21 ] The sky2 frequently crashes during machine shutdown with: sky2_get_stats+0x60/0x3d8 [sky2] dev_get_stats+0x68/0xd8 rtnl_fill_stats+0x54/0x140 rtnl_fill_ifinfo+0x46c/0xc68 rtmsg_ifinfo_build_skb+0x7c/0xf0 rtmsg_ifinfo.part.22+0x3c/0x70 rtmsg_ifinfo+0x50/0x5c netdev_state_change+0x4c/0x58 linkwatch_do_dev+0x50/0x88 __linkwatch_run_queue+0x104/0x1a4 linkwatch_event+0x30/0x3c process_one_work+0x140/0x3e0 worker_thread+0x60/0x44c kthread+0xdc/0xf0 ret_from_fork+0x10/0x50 This is caused by the sky2 being called after it has been shutdown. A previous thread about this can be found here: https://lkml.org/lkml/2016/4/12/410 An alternative fix is to assure that IFF_UP gets cleared by calling dev_close() during shutdown. This is similar to what the bnx2/tg3/xgene and maybe others are doing to assure that the driver isn't being called following _shutdown(). Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit b5c2d495 ] If an ip6 tunnel is configured to inherit the traffic class from the inner header, the dst_cache must be disabled or it will foul the policy routing. The issue is apprently there since at leat Linux-2.6.12-rc2. Reported-by:
Liam McBirnie <liam.mcbirnie@boeing.com> Cc: Liam McBirnie <liam.mcbirnie@boeing.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Takashi Iwai authored
commit 3aa02cb6 upstream. Currently kill_fasync() is called outside the stream lock in snd_pcm_period_elapsed(). This is potentially racy, since the stream may get released even during the irq handler is running. Although snd_pcm_release_substream() calls snd_pcm_drop(), this doesn't guarantee that the irq handler finishes, thus the kill_fasync() call outside the stream spin lock may be invoked after the substream is detached, as recently reported by KASAN. As a quick workaround, move kill_fasync() call inside the stream lock. The fasync is rarely used interface, so this shouldn't have a big impact from the performance POV. Ideally, we should implement some sync mechanism for the proper finish of stream and irq handler. But this oneliner should suffice for most cases, so far. Reported-by:
-
- 12 Dec, 2016 6 commits
-
-
Eli Cooper authored
commit f4180439 upstream. When xfrm is applied to TSO/GSO packets, it follows this path: xfrm_output() -> xfrm_output_gso() -> skb_gso_segment() where skb_gso_segment() relies on skb->protocol to function properly. This patch sets skb->protocol to ETH_P_IP before dst_output() is called, fixing a bug where GSO packets sent through a sit tunnel are dropped when xfrm is involved. Signed-off-by:
Eli Cooper <elicooper@gmx.com> Signed-off-by:
-
Eli Cooper authored
commit b4e479a9 upstream. When xfrm is applied to TSO/GSO packets, it follows this path: xfrm_output() -> xfrm_output_gso() -> skb_gso_segment() where skb_gso_segment() relies on skb->protocol to function properly. This patch sets skb->protocol to ETH_P_IPV6 before dst_output() is called, fixing a bug where GSO packets sent through an ipip6 tunnel are dropped when xfrm is involved. Signed-off-by:
-
Johan Hovold authored
commit 0e1614ac upstream. Make sure to drop the reference to the parent device taken by class_find_device() after "unexporting" any children when deregistering a PWM chip. Fixes: 0733424c ("pwm: Unexport children before chip removal") Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Brian Norris authored
commit fcd2042e upstream. SSIDs aren't guaranteed to be 0-terminated. Let's cap the max length when we print them out. This can be easily noticed by connecting to a network with a 32-octet SSID: [ 3903.502925] mwifiex_pcie 0000:01:00.0: info: trying to associate to '0123456789abcdef0123456789abcdef <uninitialized mem>' bssid xx:xx:xx:xx:xx:xx Fixes: 5e6e3a92 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by:
Brian Norris <briannorris@chromium.org> Acked-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Johannes Thumshirn authored
commit e784930b upstream. Export pcie_find_root_port() so we can use it outside of PCIe-AER error injection. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Ding Tianhong authored
commit bedc1969 upstream. Carrying out the following steps results in a softlockup in the RCU callback-offload (rcuo) kthreads: 1. Connect to ixgbevf, and set the speed to 10Gb/s. 2. Use ifconfig to bring the nic up and down repeatedly. [ 317.005148] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 368.106005] BUG: soft lockup - CPU#1 stuck for 22s! [rcuos/1:15] [ 368.106005] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 368.106005] task: ffff88057dd8a220 ti: ffff88057dd9c000 task.ti: ffff88057dd9c000 [ 368.106005] RIP: 0010:[<ffffffff81579e04>] [<ffffffff81579e04>] fib_table_lookup+0x14/0x390 [ 368.106005] RSP: 0018:ffff88061fc83ce8 EFLAGS: 00000286 [ 368.106005] RAX: 0000000000000001 RBX: 00000000020155c0 RCX: 0000000000000001 [ 368.106005] RDX: ffff88061fc83d50 RSI: ffff88061fc83d70 RDI: ffff880036d11a00 [ 368.106005] RBP: ffff88061fc83d08 R08: 0000000000000001 R09: 0000000000000000 [ 368.106005] R10: ffff880036d11a00 R11: ffffffff819e0900 R12: ffff88061fc83c58 [ 368.106005] R13: ffffffff816154dd R14: ffff88061fc83d08 R15: 00000000020155c0 [ 368.106005] FS: 0000000000000000(0000) GS:ffff88061fc80000(0000) knlGS:0000000000000000 [ 368.106005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 368.106005] CR2: 00007f8c2aee9c40 CR3: 000000057b222000 CR4: 00000000000407e0 [ 368.106005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 368.106005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 368.106005] Stack: [ 368.106005] 00000000010000c0 ffff88057b766000 ffff8802e380b000 ffff88057af03e00 [ 368.106005] ffff88061fc83dc0 ffffffff815349a6 ffff88061fc83d40 ffffffff814ee146 [ 368.106005] ffff8802e380af00 00000000e380af00 ffffffff819e0900 020155c0010000c0 [ 368.106005] Call Trace: [ 368.106005] <IRQ> [ 368.106005] [ 368.106005] [<ffffffff815349a6>] ip_route_input_noref+0x516/0xbd0 [ 368.106005] [<ffffffff814ee146>] ? skb_release_data+0xd6/0x110 [ 368.106005] [<ffffffff814ee20a>] ? kfree_skb+0x3a/0xa0 [ 368.106005] [<ffffffff8153698f>] ip_rcv_finish+0x29f/0x350 [ 368.106005] [<ffffffff81537034>] ip_rcv+0x234/0x380 [ 368.106005] [<ffffffff814fd656>] __netif_receive_skb_core+0x676/0x870 [ 368.106005] [<ffffffff814fd868>] __netif_receive_skb+0x18/0x60 [ 368.106005] [<ffffffff814fe4de>] process_backlog+0xae/0x180 [ 368.106005] [<ffffffff814fdcb2>] net_rx_action+0x152/0x240 [ 368.106005] [<ffffffff81077b3f>] __do_softirq+0xef/0x280 [ 368.106005] [<ffffffff8161619c>] call_softirq+0x1c/0x30 [ 368.106005] <EOI> [ 368.106005] [ 368.106005] [<ffffffff81015d95>] do_softirq+0x65/0xa0 [ 368.106005] [<ffffffff81077174>] local_bh_enable+0x94/0xa0 [ 368.106005] [<ffffffff81114922>] rcu_nocb_kthread+0x232/0x370 [ 368.106005] [<ffffffff81098250>] ? wake_up_bit+0x30/0x30 [ 368.106005] [<ffffffff811146f0>] ? rcu_start_gp+0x40/0x40 [ 368.106005] [<ffffffff8109728f>] kthread+0xcf/0xe0 [ 368.106005] [<ffffffff810971c0>] ? kthread_create_on_node+0x140/0x140 [ 368.106005] [<ffffffff816147d8>] ret_from_fork+0x58/0x90 [ 368.106005] [<ffffffff810971c0>] ? kthread_create_on_node+0x140/0x140 ==================================cut here============================== It turns out that the rcuos callback-offload kthread is busy processing a very large quantity of RCU callbacks, and it is not reliquishing the CPU while doing so. This commit therefore adds an cond_resched_rcu_qs() within the loop to allow other tasks to run. [js] use onlu cond_resched() in 3.12 Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> [ paulmck: Substituted cond_resched_rcu_qs for cond_resched. ] Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Dhaval Giani <dhaval.giani@oracle.com> Signed-off-by:
-
