This patch uses WRITE_ONCE() for all the pernet add_addr_signal_max,
add_addr_accept_max, local_addr_max and subflows_max fields in struct
pm_nl_pernet to avoid concurrency issues.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

According to the vendor driver, the new chip with XID 0x54b is
essentially the same as the one with XID 0x54a, but it doesn't need the
firmware.

So add support accordingly.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20210202044813.1304266-1-kai.heng.feng@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
Add notifications when route hardware flags change

Routes installed to the kernel can be programmed to capable devices, in
which case they are marked with one of two flags. RTM_F_OFFLOAD for
routes that offload traffic from the kernel and RTM_F_TRAP for routes
that trap packets to the kernel for processing (e.g., host routes).

These flags are of interest to routing daemons since they would like to
delay advertisement of routes until they are installed in hardware. This
allows them to avoid packet loss or misrouted packets. Currently,
routing daemons do not receive any notifications when these flags are
changed, requiring them to poll the kernel tables for changes which is
inefficient.

This series addresses the issue by having the kernel emit RTM_NEWROUTE
notifications whenever these flags change. The behavior is controlled by
two sysctls (net.ipv4.fib_notify_on_flag_change and
net.ipv6.fib_notify_on_flag_change) that default to 0 (no
notifications).

Note that even if route installation in hardware is improved to be more
synchronous, these notifications are still of interest. For example, a
multipath route can change from RTM_F_OFFLOAD to RTM_F_TRAP if its
neighbours become invalid. A routing daemon can choose to withdraw /
replace the route in that case. In addition, the deletion of a route
from the kernel can prompt the installation of an identical route
(already in kernel, with an higher metric) to hardware.

For testing purposes, netdevsim is aligned to simulate a "real" driver
that programs routes to hardware.

Series overview:

Patches #1-#2 align netdevsim to perform route programming in a
non-atomic context

Patches #3-#5 add sysctl to control IPv4 notifications

Patches #6-#8 add sysctl to control IPv6 notifications

Patch #9 extends existing fib tests to set sysctls before running tests

Patch #10 adds test for fib notifications over netdevsim
====================

Link: https://lore.kernel.org/r/20210201194757.3463461-1-idosch@idosch.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add test to check fib notifications behavior.

The test checks route addition, route deletion and route replacement for
both IPv4 and IPv6.

When fib_notify_on_flag_change=0, expect single notification for route
addition/deletion/replacement.

When fib_notify_on_flag_change=1, expect:
- two notification for route addition/replacement, first without RTM_F_TRAP
  and second with RTM_F_TRAP.
- single notification for route deletion.

$ ./fib_notifications.sh
TEST: IPv4 route addition                                           [ OK ]
TEST: IPv4 route deletion                                           [ OK ]
TEST: IPv4 route replacement                                        [ OK ]
TEST: IPv6 route addition                                           [ OK ]
TEST: IPv6 route deletion                                           [ OK ]
TEST: IPv6 route replacement                                        [ OK ]
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Run the test cases with both `fib_notify_on_flag_change` sysctls set to
'1', and then with both sysctls set to '0' to verify there are no
regressions in the test when notifications are added.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel,
but not necessarily in hardware.

The asynchronous nature of route installation in hardware can lead
to a routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.

It is also possible for a route already installed in hardware to change
its action and therefore its flags. For example, a host route that is
trapping packets can be "promoted" to perform decapsulation following
the installation of an IPinIP/VXLAN tunnel.

Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed. The aim is to provide an indication to user-space
(e.g., routing daemons) about the state of the route in hardware.

Introduce a sysctl that controls this behavior.

Keep the default value at 0 (i.e., do not emit notifications) for several
reasons:
- Multiple RTM_NEWROUTE notification per-route might confuse existing
  routing daemons.
- Convergence reasons in routing daemons.
- The extra notifications will negatively impact the insertion rate.
- Not all users are interested in these notifications.

Move fib6_info_hw_flags_set() to C file because it is no longer a short
function.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

With the next patch mlxsw and netdevsim will fail in compilation if
CONFIG_IPV6 is disabled.

Do not call fib6_info_hw_flags_set() when IPv6 is disabled.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The next patch will emit notification when hardware flags are changed,
in case that fib_notify_on_flag_change sysctl is set to 1.

To know sysctl values, net struct is needed.
This change is consistent with the IPv4 version, which gets 'net' struct
as its first argument.

Currently, the only callers of this function are mlxsw and netdevsim.
Patch the callers to pass net.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel,
but not necessarily in hardware.

The asynchronous nature of route installation in hardware can lead to a
routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.

It is also possible for a route already installed in hardware to change
its action and therefore its flags. For example, a host route that is
trapping packets can be "promoted" to perform decapsulation following
the installation of an IPinIP/VXLAN tunnel.

Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed. The aim is to provide an indication to user-space
(e.g., routing daemons) about the state of the route in hardware.

Introduce a sysctl that controls this behavior.

Keep the default value at 0 (i.e., do not emit notifications) for several
reasons:
- Multiple RTM_NEWROUTE notification per-route might confuse existing
  routing daemons.
- Convergence reasons in routing daemons.
- The extra notifications will negatively impact the insertion rate.
- Not all users are interested in these notifications.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Publish fib_nlmsg_size() to allow it to be used later on from
fib_alias_hw_flags_set().

Remove the inline keyword since it shouldn't be used inside C files.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

fib_dump_info() does not change 'fri', so pass it as 'const'.
It will later allow us to invoke fib_dump_info() from
fib_alias_hw_flags_set().
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, netdevsim implements dummy FIB offload and marks notified
routes with RTM_F_TRAP flag. netdevsim does not defer route notifications
to a work queue because it does not need to program any hardware.

Given that netdevsim's purpose is to both give an example implementation
and allow developers to test their code, align netdevsim to a "real"
hardware device driver like mlxsw and have it also perform the route
"programming" in a non-atomic context.

It will be used to test route flags notifications which will be added in
the next patches.

The following changes are needed when route handling is performed in WQ:
- Handle the accounting in the main context, to be able to return an
  error for adding route when all the routes are used.
  For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling
  the delayed work, and in case that this event replaces an existing route,
  decrease the counter as part of the delayed work.

- For IPv6, cannot use fen6_info->rt->fib6_siblings list because it
  might be changed during handling the delayed work.
  Save an array with the nexthops as part of fib6_event struct, and take
  a reference for each nexthop to prevent them from being freed while
  event is queued.

- Change GFP_ATOMIC allocations to GFP_KERNEL.

- Use single work item that is handling a list of ordered routes.
  Handling routes must be processed in the order they were submitted to
  avoid logical errors that could lead to unexpected failures.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When route is added/deleted, the appropriate counter is increased/decreased
to maintain number of routes.

User can limit the number of routes and then according to the appropriate
counter, adding more routes than the limitation is forbidden.

Currently, there is one lock which protects hashtable, list and accounting.

Handling the counters will be performed from both atomic context and
non-atomic context, while the hashtable and the list will be used only from
non-atomic context and therefore will be protected by a separate lock.

Protect accounting by using an atomic variable, so lock is not needed.

v2:
* Use atomic64_sub() in nsim_nexthop_account()'s error path
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: don't disable NAPI in suspend

This is version 2 of a series that reworks the order in which things
happen during channel stop and suspend (and start and resume), in
order to address a hang that has been observed during suspend.
The introductory message on the first version of the series gave
some history which is omitted here.

The end result of this series is that we only enable NAPI and the
I/O completion interrupt on a channel when we start the channel for
the first time.  And we only disable them when stopping the channel
"for good."  In other words, NAPI and the completion interrupt
remain enabled while a channel is stopped for suspend.

One comment on version 1 of the series suggested *not* returning
early on success in a function, instead having both success and
error paths return from the same point at the end of the function
block.  This has been addressed in this version.

In addition, this version consolidates things a little bit, but the
net result of the series is exactly the same as version 1 (with the
exception of the return fix mentioned above).

First, patch 6 in the first version was a small step to make patch 7
easier to understand.  The two have been combined now.

Second, previous version moved (and for suspend/resume, eliminated)
I/O completion interrupt and NAPI disable/enable control in separate
steps (patches).  Now both are moved around together in patch 5 and
6, which eliminates the need for the final (NAPI-only) patch.

I won't repeat the patch summaries provided in v1:
  https://lore.kernel.org/netdev/20210129202019.2099259-1-elder@linaro.org/

Many thanks to Willem de Bruijn for his thoughtful input.
====================

Link: https://lore.kernel.org/r/20210201172850.2221624-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Transactions to send data for a network device can be allocated at
any time up until the point the TX queue is stopped.  It is possible
for ipa_start_xmit() to be called in one context just before a
the transmit queue is stopped in another.

Update gsi_channel_trans_last() so that for TX channels the
allocated and pending transaction lists are checked--in addition
to the completed and polled lists--to determine the "last"
transaction.  This means any transaction that has been allocated
before the TX queue is stopped will be allowed to complete before
we conclude the channel is quiesced.

Rework the function a bit to use a list pointer and gotos.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

No completion interrupts will occur while an endpoint is suspended,
nor when a channel has been stopped for suspend.  So there's no need
to disable the interrupt during suspend and re-enable it when
resuming.  Without any interrupts occurring, there is no need to
disable/re-enable NAPI for channel suspend/resume either.

We'll only enable NAPI and the interrupt when we first start the
channel, and disable it again only when it's "really" stopped.

To accomplish this, move the enable/disable calls out of
__gsi_channel_start() and __gsi_channel_stop(), and into
gsi_channel_start() and gsi_channel_stop() instead.

Add a call to napi_synchronize() to gsi_channel_suspend(), to ensure
NAPI polling is done before moving on.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Disable both the I/O completion interrupt and NAPI polling on a
channel *after* we successfully stop it rather than before.  This
ensures a completion occurring just before the channel is stopped
gets processed.

Enable NAPI polling and the interrupt *before* starting a channel
rather than after, to be symmetric.  A stopped channel won't
generate any completion interrupts anyway.

Enable NAPI before the interrupt and disable it afterward.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Open-code gsi_channel_freeze() and gsi_channel_thaw() in all callers
and get rid of these two functions.  This is part of reworking the
sequence of things done during channel suspend/resume and start/stop.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Create a new function that does most of the work of starting a
channel.  What's different is that it takes a flag indicating
whether the channel should really be started or not.  Create
another new function __gsi_channel_stop() that behaves similarly.

IPA v3.5.1 implements suspend using a special SUSPEND endpoint
setting.  If the endpoint is suspended when an I/O completes on the
underlying GSI channel, a SUSPEND interrupt is generated.

Newer versions of IPA do not implement the SUSPEND endpoint mode.
Instead, endpoint suspend is implemented by simply stopping the
underlying GSI channel.  In this case, a completing I/O on a
*stopped* channel causes the SUSPEND interrupt condition.

These new functions put all activity related to starting or stopping
a channel (including "thawing/freezing" the channel) in one place,
whether or not the channel is actually started or stopped.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Create a new helper function that encapsulates issuing a set of
channel stop commands, retrying if appropriate, with a short delay
between attempts.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If an error occurs starting a channel, don't "thaw" it.
We should assume the channel remains in a non-started state.

Update the comment in gsi_channel_stop(); calls to this function
are no longer retried.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Avoid the assumption that ksize(kmalloc(S)) == ksize(kmalloc(S)): when
cloning an skb, save and restore truesize after pskb_expand_head(). This
can occur if the allocator decides to service an allocation of the same
size differently (e.g. use a different size class, or pass the
allocation on to KFENCE).

Because truesize is used for bookkeeping (such as sk_wmem_queued), a
modified truesize of a cloned skb may result in corrupt bookkeeping and
relevant warnings (such as in sk_stream_kill_queues()).

Link: https://lkml.kernel.org/r/X9JR/J6dMMOy1obu@elver.google.com
Reported-by: syzbot+7b99aafdcc2eedea6178@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210201160420.2826895-1-elver@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With version 0 of the protocol it was legal to encode the 'Subflow Id' in
the MP_PRIO suboption, to specify which subflow would change its 'Backup'
flag. This has been removed from v1 specification: thus, according to RFC
8684 §3.3.8, the resulting 'Length' for MP_PRIO changed from 4 to 3 byte.

Current Linux generates / parses MP_PRIO according to the old spec, using
'Length' equal to 4, and hardcoding 1 as 'Subflow Id'; RFC compliance can
improve if we change 'Length' in other to become 3, leaving a 'Nop' after
the MP_PRIO suboption. In this way the kernel will emit and accept *only*
MP_PRIO suboptions that are compliant to version 1 of the MPTCP protocol.

 unpatched 5.11-rc kernel:
 [root@bottarga ~]# tcpdump -tnnr unpatched.pcap | grep prio
 reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1)
 dropped privs to tcpdump
 IP 10.0.3.2.48433 > 10.0.1.1.10006: Flags [.], ack 1, win 502, options [nop,nop,TS val 4032325513 ecr 1876514270,mptcp prio non-backup id 1,mptcp dss ack 14084896651682217737], length 0

 patched 5.11-rc kernel:
 [root@bottarga ~]# tcpdump -tnnr patched.pcap | grep prio
 reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1)
 dropped privs to tcpdump
 IP 10.0.3.2.49735 > 10.0.1.1.10006: Flags [.], ack 1, win 502, options [nop,nop,TS val 1276737699 ecr 2686399734,mptcp prio non-backup,nop,mptcp dss ack 18433038869082491686], length 0

Changes since v2:
 - when accounting for option space, don't increment 'TCPOLEN_MPTCP_PRIO'
   and use 'TCPOLEN_MPTCP_PRIO_ALIGN' instead, thanks to Matthieu Baerts.
Changes since v1:
 - refactor patch to avoid using 'TCPOLEN_MPTCP_PRIO' with its old value,
   thanks to Geliang Tang.

Fixes: 06706542 ("mptcp: add the outgoing MP_PRIO support")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Matteo Croce <mcroce@linux.microsoft.com>
Link: https://lore.kernel.org/r/846cdd41e6ad6ec88ef23fee1552ab39c2f5a3d1.1612184361.git.dcaratti@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Emil Renner Berthing says:

====================
drivers: net: update tasklet_init callers

This updates the remaining callers of tasklet_init() in drivers/net
to the new API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")

All changes are done by coccinelle using the following semantic patch.
Coccinelle needs a little help parsing drivers/net/arcnet/arcnet.c

@ match @
type T;
T *container;
identifier tasklet;
identifier callback;
@@
	tasklet_init(&container->tasklet, callback, (unsigned long)container);

@ patch1 depends on match @
type match.T;
identifier match.tasklet;
identifier match.callback;
identifier data;
identifier container;
@@
-void callback(unsigned long data)
+void callback(struct tasklet_struct *t)
{
	...
-	T *container = (T *)data;
+	T *container = from_tasklet(container, t, tasklet);
	...
}

@ patch2 depends on match @
type match.T;
identifier match.tasklet;
identifier match.callback;
identifier data;
identifier container;
@@
-void callback(unsigned long data)
+void callback(struct tasklet_struct *t)
{
	...
-	T *container;
+	T *container = from_tasklet(container, t, tasklet);
	...
-	container = (T *)data;
	...
}

@ depends on (patch1 || patch2) @
match.T *container;
identifier match.tasklet;
identifier match.callback;
@@
-	tasklet_init(&container->tasklet, callback, (unsigned long)container);
+	tasklet_setup(&container->tasklet, callback);
====================

Link: https://lore.kernel.org/r/20210130234730.26565-1-kernel@esmil.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the async and synctty drivers to use the new tasklet API n
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This converts the driver to use the new tasklet API introduced in
commit 12cc923f ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull clang-format update from Miguel Ojeda:
 "Update with the latest for_each macro list"

* tag 'clang-format-for-linux-v5.11-rc7' of git://github.com/ojeda/linux:
  clang-format: Update with the latest for_each macro list

Pull dma-mapping fix from Christoph Hellwig:
 "Fix a kernel crash in the new dma-mapping benchmark test (Barry Song)"

* tag 'dma-mapping-5.11-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: benchmark: fix kernel crash when dma_map_single fails

Pull vdpa fix from Michael Tsirkin:
 "A single mlx bugfix"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa/mlx5: Fix memory key MTT population

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.11-rc7, including fixes from bpf and mac80211
  trees.

  Current release - regressions:

   - ip_tunnel: fix mtu calculation

   - mlx5: fix function calculation for page trees

  Previous releases - regressions:

   - vsock: fix the race conditions in multi-transport support

   - neighbour: prevent a dead entry from updating gc_list

   - dsa: mv88e6xxx: override existent unicast portvec in port_fdb_add

  Previous releases - always broken:

   - bpf, cgroup: two copy_{from,to}_user() warn_on_once splats for BPF
     cgroup getsockopt infra when user space is trying to race against
     optlen, from Loris Reiff.

   - bpf: add missing fput() in BPF inode storage map update helper

   - udp: ipv4: manipulate network header of NATed UDP GRO fraglist

   - mac80211: fix station rate table updates on assoc

   - r8169: work around RTL8125 UDP HW bug

   - igc: report speed and duplex as unknown when device is runtime
     suspended

   - rxrpc: fix deadlock around release of dst cached on udp tunnel"

* tag 'net-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
  net: hsr: align sup_multicast_addr in struct hsr_priv to u16 boundary
  net: ipa: fix two format specifier errors
  net: ipa: use the right accessor in ipa_endpoint_status_skip()
  net: ipa: be explicit about endianness
  net: ipa: add a missing __iomem attribute
  net: ipa: pass correct dma_handle to dma_free_coherent()
  r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is set
  net/rds: restrict iovecs length for RDS_CMSG_RDMA_ARGS
  net: mvpp2: TCAM entry enable should be written after SRAM data
  net: lapb: Copy the skb before sending a packet
  net/mlx5e: Release skb in case of failure in tc update skb
  net/mlx5e: Update max_opened_tc also when channels are closed
  net/mlx5: Fix leak upon failure of rule creation
  net/mlx5: Fix function calculation for page trees
  docs: networking: swap words in icmp_errors_use_inbound_ifaddr doc
  udp: ipv4: manipulate network header of NATed UDP GRO fraglist
  net: ip_tunnel: fix mtu calculation
  vsock: fix the race conditions in multi-transport support
  net: sched: replaced invalid qdisc tree flush helper in qdisc_replace
  ibmvnic: device remove has higher precedence over reset
  ...

sup_multicast_addr is passed to ether_addr_equal for address comparison
which casts the address inputs to u16 leading to an unaligned access.
Aligning the sup_multicast_addr to u16 boundary fixes the issue.
Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com>
Link: https://lore.kernel.org/r/20210202090304.2740471-1-ennoerlangen@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 fixes 2021-02-01

Please note the first patch in this series
("Fix function calculation for page trees") is fixing a regression
due to previous fix in net which you didn't include in your previous
rc pr. So I hope this series will make it into your next rc pr,
so mlx5 won't be broken in the next rc.

* tag 'mlx5-fixes-2021-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Release skb in case of failure in tc update skb
  net/mlx5e: Update max_opened_tc also when channels are closed
  net/mlx5: Fix leak upon failure of rule creation
  net/mlx5: Fix function calculation for page trees
====================

Link: https://lore.kernel.org/r/20210202070703.617251-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>