- 06 Feb, 2015 1 commit
-
-
Ross Lagerwall authored
Commit 61a734d3 ("xen/manage: Always freeze/thaw processes when suspend/resuming") ensured that userspace processes were always frozen before suspending to reduce interaction issues when resuming devices. However, freeze_processes() does not freeze kernel threads. Freeze kernel threads as well to prevent deadlocks with the khubd thread when resuming devices. This is what native suspend and resume does. Example deadlock: [ 7279.648010] [<ffffffff81446bde>] ? xen_poll_irq_timeout+0x3e/0x50 [ 7279.648010] [<ffffffff81448d60>] xen_poll_irq+0x10/0x20 [ 7279.648010] [<ffffffff81011723>] xen_lock_spinning+0xb3/0x120 [ 7279.648010] [<ffffffff810115d1>] __raw_callee_save_xen_lock_spinning+0x11/0x20 [ 7279.648010] [<ffffffff815620b6>] ? usb_control_msg+0xe6/0x120 [ 7279.648010] [<ffffffff81747e50>] ? _raw_spin_lock_irq+0x50/0x60 [ 7279.648010] [<ffffffff8174522c>] wait_for_completion+0xac/0x160 [ 7279.648010] [<ffffffff8109c520>] ? try_to_wake_up+0x2c0/0x2c0 [ 7279.648010] [<ffffffff814b60f2>] dpm_wait+0x32/0x40 [ 7279.648010] [<ffffffff814b6eb0>] device_resume+0x90/0x210 [ 7279.648010] [<ffffffff814b7d71>] dpm_resume+0x121/0x250 [ 7279.648010] [<ffffffff8144c570>] ? xenbus_dev_request_and_reply+0xc0/0xc0 [ 7279.648010] [<ffffffff814b80d5>] dpm_resume_end+0x15/0x30 [ 7279.648010] [<ffffffff81449fba>] do_suspend+0x10a/0x200 [ 7279.648010] [<ffffffff8144a2f0>] ? xen_pre_suspend+0x20/0x20 [ 7279.648010] [<ffffffff8144a1d0>] shutdown_handler+0x120/0x150 [ 7279.648010] [<ffffffff8144c60f>] xenwatch_thread+0x9f/0x160 [ 7279.648010] [<ffffffff810ac510>] ? finish_wait+0x80/0x80 [ 7279.648010] [<ffffffff8108d189>] kthread+0xc9/0xe0 [ 7279.648010] [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80 [ 7279.648010] [<ffffffff8175087c>] ret_from_fork+0x7c/0xb0 [ 7279.648010] [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80 [ 7441.216287] INFO: task khubd:89 blocked for more than 120 seconds. [ 7441.219457] Tainted: G X 3.13.11-ckt12.kz #1 [ 7441.222176] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 7441.225827] khubd D ffff88003f433440 0 89 2 0x00000000 [ 7441.229258] ffff88003ceb9b98 0000000000000046 ffff88003ce83000 0000000000013440 [ 7441.232959] ffff88003ceb9fd8 0000000000013440 ffff88003cd13000 ffff88003ce83000 [ 7441.236658] 0000000000000286 ffff88003d3e0000 ffff88003ceb9bd0 00000001001aa01e [ 7441.240415] Call Trace: [ 7441.241614] [<ffffffff817442f9>] schedule+0x29/0x70 [ 7441.243930] [<ffffffff81743406>] schedule_timeout+0x166/0x2c0 [ 7441.246681] [<ffffffff81075b80>] ? call_timer_fn+0x110/0x110 [ 7441.249339] [<ffffffff8174357e>] schedule_timeout_uninterruptible+0x1e/0x20 [ 7441.252644] [<ffffffff81077710>] msleep+0x20/0x30 [ 7441.254812] [<ffffffff81555f00>] hub_port_reset+0xf0/0x580 [ 7441.257400] [<ffffffff81558465>] hub_port_init+0x75/0xb40 [ 7441.259981] [<ffffffff814bb3c9>] ? update_autosuspend+0x39/0x60 [ 7441.262817] [<ffffffff814bb4f0>] ? pm_runtime_set_autosuspend_delay+0x50/0xa0 [ 7441.266212] [<ffffffff8155a64a>] hub_thread+0x71a/0x1750 [ 7441.268728] [<ffffffff810ac510>] ? finish_wait+0x80/0x80 [ 7441.271272] [<ffffffff81559f30>] ? usb_port_resume+0x670/0x670 [ 7441.274067] [<ffffffff8108d189>] kthread+0xc9/0xe0 [ 7441.276305] [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80 [ 7441.279131] [<ffffffff8175087c>] ret_from_fork+0x7c/0xb0 [ 7441.281659] [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80 Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Cc: stable@vger.kernel.org Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
- 05 Feb, 2015 1 commit
-
-
Jennifer Herbert authored
If Xenstore sends back a XS_ERROR for TRANSACTION_END, the driver BUGs because it cannot find the matching transaction in the list. For TRANSACTION_START, it leaks memory. Check the message as returned from xenbus_dev_request_and_reply(), and clean up for TRANSACTION_START or discard the error for TRANSACTION_END. Signed-off-by:
Jennifer Herbert <Jennifer.Herbert@citrix.com> Signed-off-by:
-
- 28 Jan, 2015 19 commits
-
-
David Vrabel authored
For a PV guest, use the find_special_page op to find the right page. To handle VMAs being split, remember the start of the original VMA so the correct index in the pages array can be calculated. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com>
-
David Vrabel authored
In an x86 PV guest, get_user_pages_fast() on a userspace address range containing foreign mappings does not work correctly because the M2P lookup of the MFN from a userspace PTE may return the wrong page. Force get_user_pages_fast() to fail on such addresses by marking the PTEs as special. If Xen has XENFEAT_gnttab_map_avail_bits (available since at least 4.0), we can do so efficiently in the grant map hypercall. Otherwise, it needs to be done afterwards. This is both inefficient and racy (the mapping is visible to the task before we fixup the PTEs), but will be fine for well-behaved applications that do not use the mapping until after the mmap() system call returns. Guests with XENFEAT_auto_translated_physmap (ARM and x86 HVM or PVH) do not need this since get_user_pages() has always worked correctly for them. Signed-off-by:
-
Jennifer Herbert authored
Use gnttab_unmap_refs_async() to wait until the mapped pages are no longer in use before unmapping them. This allows blkback to use network storage which may retain refs to pages in queued skbs after the block I/O has completed. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Acked-by:
Jens Axboe <axboe@kernel.de> Signed-off-by:
-
Jennifer Herbert authored
Use gnttab_unmap_refs_async() to wait until the mapped pages are no longer in use before unmapping them. This allows userspace programs to safely use Direct I/O and AIO to a network filesystem which may retain refs to pages in queued skbs after the filesystem I/O has completed. Signed-off-by:
-
David Vrabel authored
Unmapping may require sleeping and we unmap while holding priv->lock, so convert it to a mutex. Signed-off-by:
-
Jennifer Herbert authored
Introduce gnttab_unmap_refs_async() that can be used to safely unmap pages that may be in use (ref count > 1). If the pages are in use the unmap is deferred and retried later. This polling is not very clever but it should be good enough if the cases where the delay is necessary are rare. The initial delay is 5 ms and is increased linearly on each subsequent retry (to reduce load if the page is in use for a long time). This is needed to allow block backends using grant mapping to safely use network storage (block or filesystem based such as iSCSI or NFS). The network storage driver may complete a block request whilst there is a queued network packet retry (because the ack from the remote end races with deciding to queue the retry). The pages for the retried packet would be grant unmapped and the network driver (or hardware) would access the unmapped page. Signed-off-by:
-
Jennifer Herbert authored
Use the foreign page flag in netback to get the domid and grant ref needed for the grant copy. This signficiantly simplifies the netback code and makes netback work with foreign pages from other backends (e.g., blkback). This allows blkback to use iSCSI disks provided by domUs running on the same host. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jennifer Herbert authored
Use the "foreign" page flag to mark pages that have a grant map. Use page->private to store information of the grant (the granting domain and the grant reference). Signed-off-by:
-
David Vrabel authored
Add gnttab_alloc_pages() and gnttab_free_pages() to allocate/free pages suitable to for granted maps. Signed-off-by:
-
Jennifer Herbert authored
Ballooned pages are always used for grant maps which means the original frame does not need to be saved in page->index nor restored after the grant unmap. This allows the workaround in netback for the conflicting use of the (unionized) page->index and page->pfmemalloc to be removed. Signed-off-by:
-
David Vrabel authored
The scratch frame mappings for ballooned pages and the m2p override are broken. Remove them in preparation for replacing them with simpler mechanisms that works. The scratch pages did not ensure that the page was not in use. In particular, the foreign page could still be in use by hardware. If the guest reused the frame the hardware could read or write that frame. The m2p override did not handle the same frame being granted by two different grant references. Trying an M2P override lookup in this case is impossible. With the m2p override removed, the grant map/unmap for the kernel mappings (for x86 PV) can be easily batched in set_foreign_p2m_mapping() and clear_foreign_p2m_mapping(). Signed-off-by:
-
David Vrabel authored
When unmapping grants, instead of converting the kernel map ops to unmap ops on the fly, pre-populate the set of unmap ops. This allows the grant unmap for the kernel mappings to be trivially batched in the future. Signed-off-by:
-
Jennifer Herbert authored
The foreign page flag will be used by Xen guests to mark pages that have grant mappings of frames from other (foreign) guests. The foreign flag is an alias for the existing (Xen-specific) pinned flag. This is safe because pinned is only used on pages used for page tables and these cannot also be foreign. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
David Vrabel authored
The optional find_special_page VMA operation is used to lookup the pages backing a VMA. This is useful in cases where the normal mechanisms for finding the page don't work. This is only called if the PTE is special. One use case is a Xen PV guest mapping foreign pages into userspace. In a Xen PV guest, the PTEs contain MFNs so get_user_pages() (for example) must do an MFN to PFN (M2P) lookup before it can get the page. For foreign pages (those owned by another guest) the M2P lookup returns the PFN as seen by the foreign guest (which would be completely the wrong page for the local guest). This cannot be fixed up improving the M2P lookup since one MFN may be mapped onto two or more pages so getting the right page is impossible given just the MFN. Signed-off-by:
-
Juergen Gross authored
Remove a nested ifdef. Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Juergen Gross authored
The file arch/x86/xen/mmu.c has some functions that can be annotated with "__init". Signed-off-by:
-
Juergen Gross authored
Some more functions in arch/x86/xen/setup.c can be made "__init". xen_ignore_unusable() can be made "static". Signed-off-by:
-
Juergen Gross authored
In many places in arch/x86/xen/setup.c wrong types are used for physical addresses (u64 or unsigned long long). Use phys_addr_t instead. Use macros already defined instead of open coding them. Correct some other type mismatches. Signed-off-by:
-
Juergen Gross authored
Remove extern declarations in arch/x86/xen/setup.c which are either not used or redundant. Move needed other extern declarations to xen-ops.h Signed-off-by:
-
- 26 Jan, 2015 1 commit
-
-
Davidlohr Bueso authored
Call __set_current_state() instead of assigning the new state directly. These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping track of who changed the state. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
- 23 Jan, 2015 1 commit
-
-
Jan Beulich authored
As a module_init() function, this should have been this way from the beginning. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
- 20 Jan, 2015 2 commits
-
-
Palik, Imre authored
In Dom0's the use of the TSC clocksource (whenever it is stable enough to be used) instead of the Xen clocksource should not cause any issues, as Dom0 VMs never live-migrated. The TSC clocksource is somewhat more efficient than the Xen paravirtualised clocksource, thus it should have higher rating. This patch decreases the rating of the Xen clocksource in Dom0s to 275. Which is half-way between the rating of the TSC clocksource (300) and the hpet clocksource (250). Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by:
Imre Palik <imrep@amazon.de> Signed-off-by:
-
Chuck Tuffli authored
With Xen configured into the arm64 kernel, any driver allocating DMA'able memory for PCI operations, must be GPL compatible, regardless of its interaction with Xen. This patch relaxes the GPL requirement of xen_dma_ops and its dependencies to allow open source drivers to be compiled for the arm64 architecture. Signed-off-by:Chuck Tuffli <chuck.tuffli@emulex.com>
-
- 18 Jan, 2015 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "We've been sitting on our fixes branch for a while, so this batch is unfortunately on the large side. A lot of these are tweaks and fixes to device trees, fixing various bugs around clocks, reg ranges, etc. There's also a few defconfig updates (which are on the late side, no more of those). All in all the diffstat is bigger than ideal at this time, but nothing in here seems particularly risky" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) reset: sunxi: fix spinlock initialization ARM: dts: disable CCI on exynos5420 based arndale-octa drivers: bus: check cci device tree node status ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288 ARM: nomadik: fix up leftover device tree pins ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree ARM: at91/dt: sam9263: Add missing clocks to lcdc node ARM: at91: sama5d3: dt: correct the sound route ARM: at91/dt: sama5d4: fix the timer reg length ARM: exynos_defconfig: Enable LM90 driver ARM: exynos_defconfig: Enable options for display panel support arm: dts: Use pmu_system_controller phandle for dp phy ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances ARM: dts: berlin: correct BG2Q's SM GPIO location. ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host ARM: dts: Revert disabling of smc91x for n900 ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling ARM: dts: dra7-evm: fix qspi device tree partition size ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT ...
-
git://git.linaro.org/people/mike.turquette/linuxLinus Torvalds authored
Pull clock driver fixes from Mike Turquette: "Small number of fixes for clock drivers and a single null pointer dereference fix in the framework core code. The driver fixes vary from fixing section mismatch warnings to preventing machines from hanging (and preventing developers from crying)" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: fix possible null pointer dereference Revert "clk: ppc-corenet: Fix Section mismatch warning" clk: rockchip: fix deadlock possibility in cpuclk clk: berlin: bg2q: remove non-exist "smemc" gate clock clk: at91: keep slow clk enabled to prevent system hang clk: rockchip: fix rk3288 cpuclk core dividers clk: rockchip: fix rk3066 pll lock bit location clk: rockchip: Fix clock gate for rk3188 hclk_emem_peri clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB Host
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is one fix for a Multiqueue sleeping in invalid context problem and a MAINTAINER file update for Qlogic" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ->queue_rq can't sleep MAINTAINERS: Update maintainer list for qla4xxx
-
- 17 Jan, 2015 11 commits
-
-
Stanimir Varbanov authored
The commit 646cafc6 (clk: Change clk_ops->determine_rate to return a clk_hw as the best parent) opens a possibility for null pointer dereference, fix this. Signed-off-by:
Stanimir Varbanov <svarbanov@mm-sol.com> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Michael Turquette <mturquette@linaro.org>
-
Kevin Hao authored
This reverts commit da788acb. That commit tried to fix the section mismatch warning by moving the ppc_corenet_clk_driver struct to init section. This is definitely wrong because the kernel would free the memories occupied by this struct after boot while this driver is still registered in the driver core. The kernel would panic when accessing this driver struct. Cc: stable@vger.kernel.org # 3.17 Signed-off-by:
Kevin Hao <haokexin@gmail.com> Acked-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Heiko Stübner authored
Lockdep reported a possible deadlock between the cpuclk lock and for example the i2c driver. CPU0 CPU1 ---- ---- lock(clk_lock); local_irq_disable(); lock(&(&i2c->lock)->rlock); lock(clk_lock); <Interrupt> lock(&(&i2c->lock)->rlock); *** DEADLOCK *** The generic clock-types of the core ccf already use spin_lock_irqsave when touching clock registers, so do the same for the cpuclk. Signed-off-by:Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "Two patches, the first by Andy to fix dw dmac runtime pm and second one by me to fix the dmaengine headers in MAINTAINERS" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dw: balance PM runtime calls MAINTAINERS: dmaengine: fix the header file for dmaengine
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also two PMU driver fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools powerpc: Use dwfl_report_elf() instead of offline. perf tools: Fix segfault for symbol annotation on TUI perf test: Fix dwarf unwind using libunwind. perf tools: Avoid build splat for syscall numbers with uclibc perf tools: Elide strlcpy warning with uclibc perf tools: Fix statfs.f_type data type mismatch build error with uclibc tools: Remove bitops/hweight usage of bits in tools/perf perf machine: Fix __machine__findnew_thread() error path perf tools: Fix building error in x86_64 when dwarf unwind is on perf probe: Propagate error code when write(2) failed perf/x86/intel: Fix bug for "cycles:p" and "cycles:pp" on SLM perf/rapl: Fix sysfs_show() initialization for RAPL PMU
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix segfault when using both the map symtab viewer and annotation in the TUI (Namhyung Kim). - uClibc build fixes (Alexey Brodkin, Vineet Gupta). - bitops/hweight were moved from tools/perf/ too tools/include, move some leftovers (Arnaldo Carvalho de Melo) - Fix dwarf unwind x86_64 build error (Namhyung Kim) - Fix __machine__findnew_thread() error path (Namhyung Kim) - Propagate error code when write(2) failed in 'perf probe' (Namhyung Kim) - Use dwfl_report_elf() instead of offline in powerpc bits to properly handle non prelinked DSOs (Sukadev Bhattiprolu). - Fix dwarf unwind using libunwind in 'perf test' (Wang Nan) Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Olof Johansson authored
Merge tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes for v3.19" from Kukjin Kim: Samsung fixes for v3.19 - exynos_defconfig: enable LM90 driver and display panel support - HWMON - SENSORS_LM90 - Direct Rendering Manager (DRM) - DRM bridge registration and lookup framework - Parade ps8622/ps8625 eDP/LVDS bridge - NXP ptn3460 eDP/LVDS bridge - Exynos Fully Interactive Mobile Display controller (FIMD) - Panel registration and lookup framework - Simple panels - Backlight & LCD device support - use pmu_system_controller phandle for dp phy : DP PHY requires pmu_system_controller to handle PMU reg. now * tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos_defconfig: Enable LM90 driver ARM: exynos_defconfig: Enable options for display panel support arm: dts: Use pmu_system_controller phandle for dp phy Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Tyler Baker authored
Call spin_lock_init() before the spinlocks are used, both in early init and probe functions preventing a lockdep splat. I have been observing lockdep complaining [1] during boot on my a80 optimus [2] when CONFIG_PROVE_LOCKING has been enabled. This patch resolves the splat, and has been tested on a few other sunxi platforms without issue. [1] http://storage.kernelci.org/next/next-20150107/arm-multi_v7_defconfig+CONFIG_PROVE_LOCKING=y/lab-tbaker/boot-sun9i-a80-optimus.html [2] http://kernelci.org/boot/?a80-optimusSigned-off-by:
Tyler Baker <tyler.baker@linaro.org> Cc: <stable@vger.kernel.org> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Renesas ARM Based SoC Fixes for v3.19" from Simon Horman: Renesas ARM Based SoC Fixes for v3.19 This pull request is based on the last round of SoC updates for v3.19, Fourth Round of Renesas ARM Based SoC Updates for v3.19, tagged as renesas-soc3-for-v3.19, merged into your next/soc branch and included in v3.19-rc1. - ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds Set .control_parent for all irqpin instances for sh73a0 SoC when booting using legacy C. - ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds This fixes a long standing problem which has been present since the sh73a0 SoC started using the INTC External IRQ pin driver. The patch that introduced the problem is 341eb546 ("ARM: shmobile: INTC External IRQ pin driver on sh73a0") which was included in v3.10. * tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
-
Abhilash Kesavan authored
The arndale-octa board was giving "imprecise external aborts" during boot-up with MCPM enabled. CCI enablement of the boot cluster was found to be the cause of these aborts (possibly because the secure f/w was not allowing it). Hence, disable CCI for the arndale-octa board. Signed-off-by:
Abhilash Kesavan <a.kesavan@samsung.com> Tested-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
-
Abhilash Kesavan authored
The arm-cci driver completes the probe sequence even if the cci node is marked as disabled. Add a check in the driver to honour the cci status in the device tree. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Nicolas Pitre <nico@linaro.org> Tested-by:
-
