- 08 Jul, 2021 10 commits
-
-
Jason Wang authored
For split virtqueue, we used to depend on the address, length and flags stored in the descriptor ring for DMA unmapping. This is unsafe for the case since the device can manipulate the behavior of virtio driver, IOMMU drivers and swiotlb. For safety, maintain the DMA address, DMA length, descriptor flags and next filed of the non indirect descriptors in vring_desc_state_extra when DMA API is used for virtio as we did for packed virtqueue and use those metadata for performing DMA operations. Indirect descriptors should be safe since they are using streaming mappings. With this the descriptor ring is write only form the view of the driver. This slight increase the footprint of the drive but it's not noticed through pktgen (64B) test and netperf test in the case of virtio-net. Signed-off-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210604055350.58753-8-jasowang@redhat.comSigned-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Jason Wang authored
Using error label for unwind in __vring_new_virtqueue. This is useful for future refacotring. Signed-off-by:
-
Jason Wang authored
This patch introduces a helper for storing descriptor in the descriptor table for split virtqueue. Signed-off-by:
-
Jason Wang authored
We should not depend on the DMA address, length and flag of descriptor table since they could be wrote with arbitrary value by the device. So this patch switches to use the stored one in desc_extra. Note that the indirect descriptors are fine since they are read-only streaming mappings. Signed-off-by:
-
Jason Wang authored
A helper is introduced for the logic of allocating the descriptor extra data. This will be reused by split virtqueue. Signed-off-by:
-
Jason Wang authored
Rename vring_desc_extra_packed to vring_desc_extra since the structure are pretty generic which could be reused by split virtqueue as well. Signed-off-by:
-
Jason Wang authored
This patch moves next from vring_desc_state_packed to vring_desc_desc_extra_packed. This makes it simpler to let extra state to be reused by split virtqueue. Signed-off-by:
-
Eli Cohen authored
After device reset, the virtqueues are not ready so clear the ready field. Failing to do so can result in virtio_vdpa failing to load if the device was previously used by vhost_vdpa and the old values are ready. virtio_vdpa expects to find VQs in "not ready" state. Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by:
Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210606053128.170399-1-elic@nvidia.comSigned-off-by:
-
Eli Cohen authored
Implement mlx5_get_vq_notification() to return the doorbell address. Since the notification area is mapped to userspace, make sure that the BAR size is at least PAGE_SIZE large. Signed-off-by:
-
Michael S. Tsirkin authored
There are currently two cases where we poll TX vq not in response to a callback: start xmit and rx napi. We currently do this with callbacks enabled which can cause extra interrupts from the card. Used not to be a big issue as we run with interrupts disabled but that is no longer the case, and in some cases the rate of spurious interrupts is so high linux detects this and actually kills the interrupt. Fix up by disabling the callbacks before polling the tx vq. Signed-off-by:
-
- 03 Jul, 2021 27 commits
-
-
Michael S. Tsirkin authored
virtio_disable_cb is currently a nop for split ring with event index. This is because it used to be always called from a callback when we know device won't trigger more events until we update the index. However, now that we run with interrupts enabled a lot we also poll without a callback so that is different: disabling callbacks will help reduce the number of spurious interrupts. Further, if using event index with a packed ring, and if being called from a callback, we actually do disable interrupts which is unnecessary. Fix both issues by tracking whenever we get a callback. If that is the case disabling interrupts with event index can be a nop. If not the case disable interrupts. Note: with a split ring there's no explicit "no interrupts" value. For now we write a fixed value so our chance of triggering an interupt is 1/ring size. It's probably better to write something related to the last used index there to reduce the chance even further. For now I'm keeping it simple. Signed-off-by: -
Michael S. Tsirkin authored
We currently check num_free outside tx q lock which is unsafe: new packets can arrive meanwhile and there won't be space in the queue. Thus a spurious queue wakeup causing overhead and even packet drops. Move the check under the lock to fix that. Signed-off-by: -
Michael S. Tsirkin authored
It's unsafe to operate a vq from multiple threads. Unfortunately this is exactly what we do when invoking clean tx poll from rx napi. Same happens with napi-tx even without the opportunistic cleaning from the receive interrupt: that races with processing the vq in start_xmit. As a fix move everything that deals with the vq to under tx lock. Fixes: b92f1e67 ("virtio-net: transmit napi") Signed-off-by:
-
Eli Cohen authored
In order to support running vdpa using vritio_vdpa driver, we need to create a different kind of MR, one that has 1:1 mapping, since the addresses referring to virtqueues are dma addresses. We create the 1:1 MR in mlx5_vdpa_dev_add() only in case firmware supports the general capability umem_uid_0. The reason for that is that 1:1 MRs must be created with uid == 0 while virtqueue objects can be created with uid == 0 only when the firmware capability is on. If the set_map() callback is called with new translations provided through iotlb, the driver will destroy the 1:1 MR and create a regular one. Signed-off-by:
-
Eli Cohen authored
Before SF support was introduced, the DMA device was equal to mdev->device which was in essence equal to pdev->dev. With SF introduction this is no longer true. It has already been handled for vhost_vdpa since the reference to the dma device can from within mlx5_vdpa. With virtio_vdpa this broke. To fix this we set the real dma device when initializing the device. In addition, for the sake of consistency, previous references in the code to the dma device are changed to vdev->dma_dev. Fixes: d13a15d5 ("vdpa/mlx5: Use the correct dma device when registering memory") Signed-off-by:
-
Eli Cohen authored
Currently all resources must be created with uid != 0 which is essential when userspace processes are allocating virtquueue resources. Since this is a kernel implementation, it is perfectly legal to open resources with uid == 0. In case firmware supports, avoid allocating user context. Signed-off-by:
-
Eli Cohen authored
umem size is a 32 bit unsigned value so assigning it to an int could cause false failures. Set the calculated value inside the function and modify function name to reflect the fact it updates the size. This bug was found during code review but never had real impact to this date. Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by:
-
Eli Cohen authored
Fix copy paste bug assigning umem1 size to umem2 and umem3. The issue was discovered when trying to use a 1:1 MR that covers the entire address space where firmware complained that provided sizes are not large enough. 1:1 MRs are required to support virtio_vdpa. Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by:
-
Yang Li authored
Fix function name in virtio_ring.c kernel-doc comment to remove a warning found by clang_w1. drivers/virtio/virtio_ring.c:1903: warning: expecting prototype for virtqueue_get_buf(). Prototype was for virtqueue_get_buf_ctx() instead Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1621998731-17445-1-git-send-email-yang.lee@linux.alibaba.comSigned-off-by:
-
Mike Christie authored
Switch from a mix of tabs and spaces to just tabs. Signed-off-by:
Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20210525174733.6212-6-michael.christie@oracle.comReviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Mike Christie authored
We use 3 coding styles in this struct. Switch to just tabs. Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Acked-by:
-
Mike Christie authored
vhost_scsi_flush will flush everything, so we can clear the backends then flush, then destroy. We don't need to flush before each vq destruction because after the flush we will have made sure there can be no new cmds started and there are no running cmds. Signed-off-by:
-
Mike Christie authored
The vhost work flush function was flushing the entire work queue, so there is no need for the double vhost_work_dev_flush calls in vhost_scsi_flush. And we do not need to call vhost_poll_flush for each poller because that call also ends up flushing the same work queue thread the vhost_work_dev_flush call flushed. Signed-off-by:
-
Mike Christie authored
vhost_work_flush doesn't do anything with the work arg. This patch drops it and then renames vhost_work_flush to vhost_work_dev_flush to reflect that the function flushes all the works in the dev and not just a specific queue or work item. Signed-off-by:
-
Xie Yongji authored
The buf->len might come from an untrusted device. This ensures the value would not exceed the size of the buffer to avoid data corruption or loss. Signed-off-by:
Xie Yongji <xieyongji@bytedance.com> Acked-by:
-
Stefan Hajnoczi authored
The struct virtio_blk_config seg_max value is read from the device and incremented by 2 to account for the request header and status byte descriptors added by the driver. In preparation for supporting untrusted virtio-blk devices, protect against integer overflow and limit the value to a safe maximum. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Shaokun Zhang authored
Function 'vhost_vring_ioctl' is declared twice, remove the repeated declaration. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1621857884-19964-1-git-send-email-zhangshaokun@hisilicon.comAcked-by:
-
Jason Wang authored
We forget to assign a error value when we fail to map the notification during prove. This patch fixes it. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 11d8ffed ("vp_vdpa: switch to use vp_modern_map_vq_notify()") Signed-off-by:
-
Xie Yongji authored
Do some cleanups in virtnet_restore() when virtnet_cpu_notif_add() failed. Signed-off-by:
-
Xie Yongji authored
The vblk->vqs should be freed before we call init_vqs() in virtblk_restore(). Signed-off-by:
-
Zhu Lingshan authored
This commit would reuse pre-defined macros for ifcvf device ids and vendor ids Signed-off-by:
Zhu Lingshan <lingshan.zhu@intel.com> Link: https://lore.kernel.org/r/20210510081015.4212-3-lingshan.zhu@intel.comSigned-off-by:
-
Zhu Lingshan authored
This commit updates virtio id table by adding transitional device ids Signed-off-by:
-
Zhu Lingshan authored
This commit implements doorbell mapping feature for ifcvf. This feature maps the notify page to userspace, to eliminate vmexit when kick a vq. Signed-off-by:
-
Zhu Lingshan authored
This commit records virtio notify base physical addr and calculate doorbell physical address for vqs. Signed-off-by:
-
Wan Jiabing authored
In commit 7d189f61 ("vdpa_sim_blk: implement ramdisk behaviour") linux/blkdev.h was included here causing the duplicate include. Remove the later duplicate include. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20210510024307.7143-1-wanjiabing@vivo.comReviewed-by:
-
Stefano Garzarella authored
Trivial change for the vhost_iotlb_del_range() documentation, fixing the function name in the comment block. Discovered with `make C=2 M=drivers/vhost`: ../drivers/vhost/iotlb.c:92: warning: expecting prototype for vring_iotlb_del_range(). Prototype was for vhost_iotlb_del_range() instead Signed-off-by:
-
Sohaib authored
Prior to 72deb455 ("block: remove CONFIG_LBDAF"), it was optional if the 32-bit kernel support block device and/or file sizes larger than 2 TiB (considering the sector size is 512 bytes) But now sector_t and blkcnt_t are always 64-bit in size. Suggested-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
Sohaib Mohammed <sohaib.amhmd@gmail.com> Link: https://lore.kernel.org/r/20210430103611.77345-1-sohaib.amhmd@gmail.comReviewed-by:
-
- 02 Jul, 2021 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup updates from Tejun Heo: - cgroup.kill is added which implements atomic killing of the whole subtree. Down the line, this should be able to replace the multiple userland implementations of "keep killing till empty". - PSI can now be turned off at boot time to avoid overhead for configurations which don't care about PSI. * 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: make per-cgroup pressure stall tracking configurable cgroup: Fix kernel-doc cgroup: inline cgroup_task_freeze() tests/cgroup: test cgroup.kill tests/cgroup: move cg_wait_for(), cg_prepare_for_wait() tests/cgroup: use cgroup.kill in cg_killall() docs/cgroup: add entry for cgroup.kill cgroup: introduce cgroup.kill
-
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpuLinus Torvalds authored
Pull percpu updates from Dennis Zhou: - percpu chunk depopulation - depopulate backing pages for chunks with empty pages when we exceed a global threshold without those pages. This lets us reclaim a portion of memory that would previously be lost until the full chunk would be freed (possibly never). - memcg accounting cleanup - previously separate chunks were managed for normal allocations and __GFP_ACCOUNT allocations. These are now consolidated which cleans up the code quite a bit. - a few misc clean ups for clang warnings * 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: optimize locking in pcpu_balance_workfn() percpu: initialize best_upa variable percpu: rework memcg accounting mm, memcg: introduce mem_cgroup_kmem_disabled() mm, memcg: mark cgroup_memory_nosocket, nokmem and noswap as __ro_after_init percpu: make symbol 'pcpu_free_slot' static percpu: implement partial chunk depopulation percpu: use pcpu_free_slot instead of pcpu_nr_slots - 1 percpu: factor out pcpu_check_block_hint() percpu: split __pcpu_balance_workfn() percpu: fix a comment about the chunks ordering
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS updates from Thomas Bogendoerfer: - add support for OpeneEmbed SOM9331 board - Ingenic fixes/improvments - other fixes and cleanups * tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (39 commits) MIPS: Fix PKMAP with 32-bit MIPS huge page support MIPS: CI20: Add second percpu timer for SMP. MIPS: CI20: Reduce clocksource to 750 kHz. MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs. dt-bindings: clock: Add documentation for MAC PHY control bindings. MIPS: X1830: Respect cell count of common properties. MIPS: set mips32r5 for virt extensions MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops MIPS: MT extensions are not available on MIPS32r1 mips/kvm: Use BUG_ON instead of if condition followed by BUG MIPS: OCTEON: octeon-usb: Use devm_platform_get_and_ioremap_resource() MIPS: add PMD table accounting into MIPS'pmd_alloc_one MIPS: Loongson64: fix spelling of SPDX tag MIPS: ingenic: rs90: Add dedicated VRAM memory region MIPS: ingenic: gcw0: Set codec to cap-less mode for FM radio MIPS: ingenic: jz4780: Fix I2C nodes to match DT doc MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER MIPS: Kconfig: ingenic: Ensure MACH_INGENIC_GENERIC selects all SoCs MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B) MIPS: boot: Support specifying UART port on Ingenic SoCs ...
-
