- 23 Dec, 2021 1 commit
-
-
Peter Ujfalusi authored
Catch the cases when the stored sdev->dsp_oops_offset and the offset received via the panic message differs and print a warning, but keep using the dsp_oops_offset for the oops query. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211223113628.18582-2-peter.ujfalusi@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 22 Dec, 2021 4 commits
-
-
Vincent Knecht authored
Don't use enums for DACL/DACR Signal Invert controls, and change them into a stereo "DAC Signal Invert Switch" control. Signed-off-by:
Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20211222135403.2991657-1-vincent.knecht@mailoo.orgSigned-off-by:
-
Alexander Stein authored
This is used in meson-sm1 and meson-g12 .dtsi. Add the property to the binding. This fixes the dtschema warning: audio-controller@740: 'sound-name-prefix' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
Alexander Stein <alexander.stein@mailbox.org> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211218143423.18768-3-alexander.stein@mailbox.orgSigned-off-by:
-
Alexander Stein authored
This is used in meson-gxl and meson-g12-common .dtsi. Add the property to the binding. This fixes the dtschema warning: audio-controller@32000: 'sound-name-prefix' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
-
Alexander Stein authored
name-prefix.txt does not exist anymore, just reference the schema instead. Signed-off-by:
-
- 21 Dec, 2021 11 commits
-
-
Vincent Knecht authored
AK4375 is a 32-bit stereo DAC with headphones amplifier. There's no documentation for it on akm.com, and only a brief datasheet can be found floating on the internets [1]. Thanks to Oriane BAYERD <obayerd@eurocomposant.fr> for finally answering my inquiries through akm.com, if only to tell me that this chip is EOL following AKM factory burning in october 2020 and thus no detailed documentation is available anymore... AK4331 is advertised [2] as pin and register compatible with AK4375 so some scraps of its datasheet were used and this driver might be used as a base for it, but this is totally untested. So this driver is mainly based on downstream code [3] and [4] by Hu Jin from AKM (no known email). Tested on msm8916-alcatel-idol347 and msm8939-alcatel-idol3, which both use PLL driven clock with bypass of SRC (sample rate converter), so only this setup is supported for now. [1] https://datasheetspdf.com/pdf-file/1400317/AKM/AK4375A/1 [2] https://www.akm.com/content/dam/documents/products/audio/audio-dac/ak4331ecb/ak4331ecb-en-datasheet.pdf [3] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/alcatel-idol347/sound/soc/codecs/idol347/ak4375.c [4] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/alcatel-idol347/sound/soc/codecs/ak4375.cSigned-off-by:
-
Vincent Knecht authored
AK4375 is an audio DAC with headphones amplifier controlled via I2C. Add simple device tree bindings that describe how to set it up. Reviewed-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). While at it also drop "r_irq" member from struct bcm_i2s_priv as there are no users of it. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211221170100.27423-3-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
-
Ajit Kumar Pandey authored
Remove duplicate depends on statement in Kconfig file. Signed-off-by:
Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Link: https://lore.kernel.org/r/20211221171912.237792-1-AjitKumar.Pandey@amd.comSigned-off-by:
-
Dan Carpenter authored
This code frees "graph" and then dereferences to save the error code. Save the error code first and then use gotos to unwind the allocation. Fixes: 59716aa3 ("ASoC: qdsp6: Fix an IS_ERR() vs NULL bug") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211217150007.GB16611@kiliSigned-off-by:
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/sof/amd/acp.c:222:9: warning: Identical condition and return expression 'ret', return value is always 0 [identicalConditionAfterEarlyExit] return ret; ^ sound/soc/sof/amd/acp.c:213:6: note: If condition 'ret' is true, the function will return/exit if (ret) ^ sound/soc/sof/amd/acp.c:222:9: note: Returning identical expression 'ret' return ret; ^ Just return 0; on success. Signed-off-by:Ranjani Sridharan <ranjani.sridharan@intel.com> Reviewed-by:
-
Dmitry Osipenko authored
Remove non-existent properties from the example of the binding. These properties were borrower from the old txt binding, but they were never used in practice and aren't documented in the new binding. They aren't reported by the binding checker because dtschema needs extra patch that hasn't been upstreamed yet to make unevaluatedProperties work properly. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
-
Ajit Kumar Pandey authored
SOF machines support different codec end points and hence required different topologies configuration. Update tplg filename in machine struct to load different topology files for SOF machines. Signed-off-by:
Curtis Malainey <curtis@malainey.com> Reviewed-by:
-
Ajit Kumar Pandey authored
We need to support sof audio on different variants of Google boards. Add new entry in dmi table to enable SOF flag on Google chrome boards. Also add newer machines to sof_machines list with codecs and amps acpi id check to register sof sound cards on different variants. Signed-off-by:
Kai Vehmanen <kai.vehmanen@intel.com> Link: https://lore.kernel.org/r/20211221161814.236318-2-AjitKumar.Pandey@amd.comSigned-off-by:
-
Mark Brown authored
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: This patch-set tries to use dev_err_probe() helper function instead of manual dev_err() code. I hope ASoC will be more clean code by this patch-set.
-
- 20 Dec, 2021 24 commits
-
-
Tzung-Bi Shih authored
Eliminates error messages if snd_soc_register_card() failed. Kernel emits messages if device probe error anyway. This is mainly for removing the following error messages during boot. >>> snd_soc_register_card fail -517 Signed-off-by:Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20211220093408.207206-1-tzungbi@google.comSigned-off-by:
-
Ricard Wanderlof authored
New codec driver for Texas Instruments TLV320ADC3001 and TLV320ADC3101 audio ADCs. Signed-off-by:
Ricard Wanderlof <ricardw@axis.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2112151801370.27889@lap5cg0092dnk.se.axis.comSigned-off-by:
-
Ricard Wanderlof authored
DT bindings for Texas Instruments TLV320ADC3001 and TLV320ADC3101 audio ADCs. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20211214020843.2225831-23-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
Kuninori Morimoto authored
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by:
-
