AVR32 is gone. Now it's time to clean up the driver by removing
leftovers that was used by AVR32 related code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Only vgacon and sisusbcon did it right, the rest (via generic code) tried
underline (usually cyan).
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The vt copy_from/to_user cleanups were in a separate branch for others
to work off of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Done by copy_{from,to}_user().
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Again, a nice linear transfer that simplifies the code.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A nice big linear transfer, no need to flip stac/PAN/etc every half-entry.
Also, yay __put_user() after checking only read.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Only read access is checked before this call.

Actually, at the moment this is not an issue, as every in-tree arch does
the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU
to tell them apart, but this wasn't the case in the past and may happen
again on some odd arch in the future.

If anyone cares about 3.7 and earlier, this is a security hole (untested)
on real 80386 CPUs.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
CC: stable@vger.kernel.org # v3.7-
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linus wants to get rid of these functions, and these uses are especially
egregious: they copy a big linear array element by element.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the tty locking fix in here, so that maybe we can finally get it
fixed for real...
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes a problem with reading files larger than 2GB from a UFS-2
file system:

    https://bugzilla.kernel.org/show_bug.cgi?id=195721

The incorrect UFS s_maxsize limit became a problem as of commit
c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
which started using s_maxbytes to avoid a page index overflow in
do_generic_file_read().

That caused files to be truncated on UFS-2 file systems because the
default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it.

Here I simply increase the default to a common value used by other file
systems.
Signed-off-by: Richard Narron <comet.berkeley@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Will B <will.brokenbourgh2877@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: <stable@vger.kernel.org> # v4.9 and backports of c2a9737fSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull NFS client bugfixes from Trond Myklebust:
 "Bugfixes include:

   - Fix a typo in commit e0926934 ("NFS append COMMIT after
     synchronous COPY") that breaks copy offload

   - Fix the connect error propagation in xs_tcp_setup_socket()

   - Fix a lock leak in nfs40_walk_client_list

   - Verify that pNFS requests lie within the offset range of the layout
     segment"

* tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: Mark unnecessarily extern functions as static
  SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()
  NFSv4.0: Fix a lock leak in nfs40_walk_client_list
  pnfs: Fix the check for requests in range of layout segment
  xprtrdma: Delete an error message for a failed memory allocation in xprt_rdma_bc_setup()
  pNFS/flexfiles: missing error code in ff_layout_alloc_lseg()
  NFS fix COMMIT after COPY

Pull tty fix from Greg KH:
 "Here is a single tty core fix for 4.12-rc4. It reverts a patch that a
  lot of people reported as causing lockdep and other warnings.

  Right after I reverted this in my tree, it seems like another
  "correct" fix might have shown up, but it's too late in the release
  cycle to be messing with tty core locking, so let's just revert this
  for now to go back how things always have been and try it again for
  4.13.

  This has not been in linux-next as I only reverted it a few hours ago"

* tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "tty: fix port buffer locking"

Pull input subsystem fixes from Dmitry Torokhov:

 - a couple of regression fixes in synaptics and axp20x-pek drivers

 - try to ease transition from PS/2 to RMI for Synaptics touchpad users
   by ensuring we do not try to activate RMI mode when RMI SMBus support
   is not enabled, and nag users a bit to enable it

 - plus a couple of other changes that seemed worthwhile for this
   release

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too
  Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail
  Input: tm2-touchkey - use LEN_ON as boolean value instead of LED_FULL
  Input: synaptics - tell users to report when they should be using rmi-smbus
  Input: synaptics - warn the users when there is a better mode
  Input: synaptics - keep PS/2 around when RMI4_SMB is not enabled
  Input: synaptics - clear device info before filling in
  Input: silead - disable interrupt during suspend

Pull RTC fixlet from Alexandre Belloni:
 "A single patch, not really a fix but I don't think there is any reason
  to delay it.

  Change the mailing list address"

* tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  MAINTAINERS: update RTC mailing list

Pull SCSI fixes from James Bottomley:
 "This is nine fixes, seven of which are for the qedi driver (new as of
  4.10) the other two are a use after free in the cxgbi drivers and a
  potential NULL dereference in the rdac device handler"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: libcxgbi: fix skb use after free
  scsi: qedi: Fix endpoint NULL panic during recovery.
  scsi: qedi: set max_fin_rt default value
  scsi: qedi: Set firmware tcp msl timer value.
  scsi: qedi: Fix endpoint NULL panic in qedi_set_path.
  scsi: qedi: Set dma_boundary to 0xfff.
  scsi: qedi: Correctly set firmware max supported BDs.
  scsi: qedi: Fix bad pte call trace when iscsiuio is stopped.
  scsi: scsi_dh_rdac: Use ctlr directly in rdac_failover_get()

Pull rdma fixes from Doug Ledford:
 "For the most part this is just a minor -rc cycle for the rdma
  subsystem. Even given that this is all of the -rc patches since the
  merge window closed, it's still only about 25 patches:

   - Multiple i40iw, nes, iw_cxgb4, hfi1, qib, mlx4, mlx5 fixes

   - A few upper layer protocol fixes (IPoIB, iSER, SRP)

   - A modest number of core fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (26 commits)
  RDMA/SA: Fix kernel panic in CMA request handler flow
  RDMA/umem: Fix missing mmap_sem in get umem ODP call
  RDMA/core: not to set page dirty bit if it's already set.
  RDMA/uverbs: Declare local function static and add brackets to sizeof
  RDMA/netlink: Reduce exposure of RDMA netlink functions
  RDMA/srp: Fix NULL deref at srp_destroy_qp()
  RDMA/IPoIB: Limit the ipoib_dev_uninit_default scope
  RDMA/IPoIB: Replace netdev_priv with ipoib_priv for ipoib_get_link_ksettings
  RDMA/qedr: add null check before pointer dereference
  RDMA/mlx5: set UMR wqe fence according to HCA cap
  net/mlx5: Define interface bits for fencing UMR wqe
  RDMA/mlx4: Fix MAD tunneling when SRIOV is enabled
  RDMA/qib,hfi1: Fix MR reference count leak on write with immediate
  RDMA/hfi1: Defer setting VL15 credits to link-up interrupt
  RDMA/hfi1: change PCI bar addr assignments to Linux API functions
  RDMA/hfi1: fix array termination by appending NULL to attr array
  RDMA/iw_cxgb4: fix the calculation of ipv6 header size
  RDMA/iw_cxgb4: calculate t4_eq_status_entries properly
  RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers
  RDMA/nes: ACK MPA Reply frame
  ...

This reverts commit 925bb1ce.

It causes lots of warnings and problems so for now, let's just revert
it.

Reported-by: <valdis.kletnieks@vt.edu>
Reported-by: Russell King <linux@armlinux.org.uk>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfs_initialise_sb() and nfs_clone_super() are declared as extern even
though they are used only in fs/nfs/super.c. Mark them as static.

Also remove explicit 'inline' directive from nfs_initialise_sb() and
leave it upto compiler to decide whether inlining is worth it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Merge tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "A couple of patches for the aspeed pwm fan driver"

* tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1
  hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimed
  hwmon: (aspeed-pwm-tacho) On read failure return -ETIMEDOUT
  hwmon: (aspeed-pwm-tacho) Select REGMAP

Pull MTD fixes from Brian Norris:
 "NAND updates from Boris:

  tango fixes:
   - Add missing MODULE_DEVICE_TABLE() in tango_nand.c
   - Update the number of corrected bitflips

  core fixes:
   - Fix a long standing memory leak in nand_scan_tail()
   - Fix several bugs introduced by the per-vendor init/detection
     infrastructure (introduced in 4.12)
   - Add a static specifier to nand_ooblayout_lp_hamming_ops definition"

* tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd:
  mtd: nand: make nand_ooblayout_lp_hamming_ops static
  mtd: nand: tango: Update ecc_stats.corrected
  mtd: nand: tango: Export OF device ID table as module aliases
  mtd: nand: samsung: warn about un-parseable ECC info
  mtd: nand: free vendor-specific resources in init failure paths
  mtd: nand: drop unneeded module.h include
  mtd: nand: don't leak buffers when ->scan_bbt() fails

Make fan and pwm names in sysfs start with index 1 in accordance to
Documentation/hwmon/sysfs-interface conventions.

Current implementation starts with index 0, making tools such as
sensors(1) skip the first fan.
Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com>
Fixes: 2d7a548a ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Call of_node_put() on a node claimed with of_node_get() or by any other
means such as for_each_child_of_node().
Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com>
Fixes: 2d7a548a ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This patch fixes the kernel doc warnings in the driver.
Signed-off-by: Nava kishore Manne <navam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds the hooks for an optional reset controller in the 8250 device
tree node.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gsm_cleanup_mux() is called in the line discipline close path which
is called at tty_release() time. At this stage the tty is no longer
operational enough to send any frames. Sending close frames is
therefore not possible and waiting for their answers always times
out.

This patch removes sending close messages and waiting for their answers
from the tty_release path.

This patch makes explicit what previously implicitly had been the case
already: We are not able to tell the modem that we are about to close
the multiplexer on our side. This means the modem will stay in
multiplexer mode and re-establishing the multiplexer later fails. The
only way for userspace to work around this is to manually send a close
frame in N_TTY mode after closing the mux.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sccnxp driver doesn't get the correct uart clock rate, if CONFIG_HAVE_CLOCK
is disabled. Correct usage of clk API to make it work with/without it.

Fixes: 90efa75f (serial: sccnxp: Using CLK API for getting UART clock)
Suggested-by: Russell King - ARM Linux <linux@armlinux.org.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Historically the N_TTY driver could never fail but this has become broken over
time. Rather than trying to rewrite half the ldisc layer to fix the breakage
introduce a second level of fallback with an N_NULL ldisc which cannot fail,
and thus restore the guarantees required by the ldisc layer.

We still try and fail to N_TTY first. It's much more useful to find yourself
back in your old ldisc (first attempt) or in N_TTY (second attempt), and while
I'm not aware of any code out there that makes those assumptions it's good to
drive(r) defensively.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Over in the staging tree, N_SPEAKUP is added, so to make life easier for
merging and other development, also reserve it in the tty tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

acpi_dev_found checks that there is a matching ACPI node, but it
may be disabled (_STA method returns 0) in which case the
soc_button_array driver will not bind to it and axp20x-pek should
handle the power-button.

This commit switches from acpi_dev_found to acpi_dev_present to
avoid not registering an input-dev for the powerbutton when there
is a disabled PNP0C40 device.

The ACPI-6.0 standard defines a standard gpio button device using
the ACPI0011 HID replacing the custom PNP0C40 gpio device, many
newer devices define both PNP0C40 and ACPI0011 devices enabling one
or the other depending on whether the BIOS thinks it is going to boot
Android or Windows.

This commit adds a check for the ACPI0011 device, so that if
either device is present *and* enabled we don't register an input-dev
for the powerbutton.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Commit 9b13a4ca ("Input: axp20x-pek - do not register input device
on some systems") added a check for the INTCFD9 ACPI device which also
handles the powerbutton as on some systems the powerbutton is connected
to both the PMIC, handled by axp20x-pek, and to a gpio on the SoC, handled
by soc_button_array which attaches itself to the INTCFD9 ACPI device.

Testing + comparing DSDTs has shown that this only happens on Cherry
Trail devices with an AXP288 PMIC, the AXP288 PMIC is also used on
Bay Trail devices but there the power button is only connected to
the PMIC and not handled by soc_button_array.

This means that the INTCFD9 check has caused a regression on Bay Trail
devices, causing power-button presses to no longer be seen.

This commit fixes this by limiting the check to devices where the ACPI
node for the AXP288 contains a _HRV (hardware revision) attribute with
a value of 3 which indicates we are dealing with a Cherry Trail platform.

Fixes: 9b13a4ca ("Input: axp20x-pek - do not register input ...")
Reported-by: Сергей Трусов <t.rus76@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge with mainline to get acpi_dev_present() needed by patches to
axp20x-pek driver.

Pull ACPI fixes from Rafael Wysocki:
 "These revert one more problematic commit related to the ACPI-based
  handling of laptop lids and make some unuseful error messages coming
  from ACPICA go away.

  Specifics:

   - Revert one more commit related to the ACPI-based handling of laptop
     lids that changed the default behavior on laptops that booted with
     closed lids and introduced a regression there (Benjamin Tissoires).

   - Add a missing acpi_put_table() to the code implementing the
     /sys/firmware/acpi/tables interface to prevent a counter in the
     ACPICA core from overflowing (Dan Williams).

   - Drop error messages printed by ACPICA on acpi_get_table() reference
     counting mismatches as they need not indicate real errors at this
     point (Lv Zheng)"

* tag 'acpi-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Tables: Fix regression introduced by a too early mechanism enabling
  Revert "ACPI / button: Change default behavior to lid_init_state=open"
  ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of service

Pull power management fixes from Rafael Wysocki:
 "These fix two bugs in error code paths in the cpufreq core and in the
  kirkwood-cpufreq driver.

  Specifics:

   - Make cpufreq_register_driver() return an error if the ->init()
     calls fail for all CPUs to prevent non-functional drivers from
     hanging around for no reason (David Arcari).

   - Make kirkwood-cpufreq check the return value of
     clk_prepare_enable() (which may fail) as appropriate (Arvind
     Yadav)"

* tag 'pm-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable()
  cpufreq: cpufreq_register_driver() should return -ENODEV if init fails

Pull /dev/random bug fix from Ted Ts'o:
 "Fix a race on architectures with prioritized interrupts (such as m68k)
  which can causes crashes in drivers/char/random.c:get_reg()"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  fix race in drivers/char/random.c:get_reg()

Merge misc fixes from Andrew Morton:
 "15 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  scripts/gdb: make lx-dmesg command work (reliably)
  mm: consider memblock reservations for deferred memory initialization sizing
  mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified
  mlock: fix mlock count can not decrease in race condition
  mm/migrate: fix refcount handling when !hugepage_migration_supported()
  dax: fix race between colliding PMD & PTE entries
  mm: avoid spurious 'bad pmd' warning messages
  mm/page_alloc.c: make sure OOM victim can try allocations with no watermarks once
  pcmcia: remove left-over %Z format
  slub/memcg: cure the brainless abuse of sysfs attributes
  initramfs: fix disabling of initramfs (and its compression)
  mm: clarify why we want kmalloc before falling backto vmallock
  frv: declare jiffies to be located in the .data section
  include/linux/gfp.h: fix ___GFP_NOLOCKDEP value
  ksm: prevent crash after write_protect_page fails

lx-dmesg needs access to the log_buf symbol from printk.c.
Unfortunately, the symbol log_buf also exists in BPF's verifier.c and
hence gdb can pick one or the other.  If it happens to pick BPF's
log_buf, lx-dmesg doesn't work:

  (gdb) lx-dmesg
  Python Exception <class 'gdb.MemoryError'> Cannot access memory at address 0x0:
  Error occurred in Python command: Cannot access memory at address 0x0
  (gdb) p log_buf
  $15 = 0x0

Luckily, GDB has a way to deal with this, see
  https://sourceware.org/gdb/onlinedocs/gdb/Symbols.html

  (gdb) info variables ^log_buf$
  All variables matching regular expression "^log_buf$":

  File <linux.git>/kernel/bpf/verifier.c:
  static char *log_buf;

  File <linux.git>/kernel/printk/printk.c:
  static char *log_buf;
  (gdb) p 'verifier.c'::log_buf
  $1 = 0x0
  (gdb) p 'printk.c'::log_buf
  $2 = 0x811a6aa0 <__log_buf> ""
  (gdb) p &log_buf
  $3 = (char **) 0x8120fe40 <log_buf>
  (gdb) p &'verifier.c'::log_buf
  $4 = (char **) 0x8120fe40 <log_buf>
  (gdb) p &'printk.c'::log_buf
  $5 = (char **) 0x8048b7d0 <log_buf>

By being explicit about the location of the symbol, we can make lx-dmesg
work again.  While at it, do the same for the other symbols we need from
printk.c

Link: http://lkml.kernel.org/r/20170526112222.3414-1-git@andred.netSigned-off-by: André Draszik <git@andred.net>
Tested-by: Kieran Bingham <kieran@bingham.xyz>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have seen an early OOM killer invocation on ppc64 systems with
crashkernel=4096M:

	kthreadd invoked oom-killer: gfp_mask=0x16040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK), nodemask=7, order=0, oom_score_adj=0
	kthreadd cpuset=/ mems_allowed=7
	CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.4.68-1.gd7fe927-default #1
	Call Trace:
	  dump_stack+0xb0/0xf0 (unreliable)
	  dump_header+0xb0/0x258
	  out_of_memory+0x5f0/0x640
	  __alloc_pages_nodemask+0xa8c/0xc80
	  kmem_getpages+0x84/0x1a0
	  fallback_alloc+0x2a4/0x320
	  kmem_cache_alloc_node+0xc0/0x2e0
	  copy_process.isra.25+0x260/0x1b30
	  _do_fork+0x94/0x470
	  kernel_thread+0x48/0x60
	  kthreadd+0x264/0x330
	  ret_from_kernel_thread+0x5c/0xa4

	Mem-Info:
	active_anon:0 inactive_anon:0 isolated_anon:0
	 active_file:0 inactive_file:0 isolated_file:0
	 unevictable:0 dirty:0 writeback:0 unstable:0
	 slab_reclaimable:5 slab_unreclaimable:73
	 mapped:0 shmem:0 pagetables:0 bounce:0
	 free:0 free_pcp:0 free_cma:0
	Node 7 DMA free:0kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:52428800kB managed:110016kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:320kB slab_unreclaimable:4672kB kernel_stack:1152kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
	lowmem_reserve[]: 0 0 0 0
	Node 7 DMA: 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 0kB
	0 total pagecache pages
	0 pages in swap cache
	Swap cache stats: add 0, delete 0, find 0/0
	Free swap  = 0kB
	Total swap = 0kB
	819200 pages RAM
	0 pages HighMem/MovableOnly
	817481 pages reserved
	0 pages cma reserved
	0 pages hwpoisoned

the reason is that the managed memory is too low (only 110MB) while the
rest of the the 50GB is still waiting for the deferred intialization to
be done.  update_defer_init estimates the initial memoty to initialize
to 2GB at least but it doesn't consider any memory allocated in that
range.  In this particular case we've had

	Reserving 4096MB of memory at 128MB for crashkernel (System RAM: 51200MB)

so the low 2GB is mostly depleted.

Fix this by considering memblock allocations in the initial static
initialization estimation.  Move the max_initialise to
reset_deferred_meminit and implement a simple memblock_reserved_memory
helper which iterates all reserved blocks and sums the size of all that
start below the given address.  The cumulative size is than added on top
of the initial estimation.  This is still not ideal because
reset_deferred_meminit doesn't consider holes and so reservation might
be above the initial estimation whihch we ignore but let's make the
logic simpler until we really need to handle more complicated cases.

Fixes: 3a80a7fa ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Link: http://lkml.kernel.org/r/20170531104010.GI27783@dhcp22.suse.czSigned-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>	[4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KVM uses get_user_pages() to resolve its stage2 faults.  KVM sets the
FOLL_HWPOISON flag causing faultin_page() to return -EHWPOISON when it
finds a VM_FAULT_HWPOISON.  KVM handles these hwpoison pages as a
special case.  (check_user_page_hwpoison())

When huge pages are involved, this doesn't work so well.
get_user_pages() calls follow_hugetlb_page(), which stops early if it
receives VM_FAULT_HWPOISON from hugetlb_fault(), eventually returning
-EFAULT to the caller.  The step to map this to -EHWPOISON based on the
FOLL_ flags is missing.  The hwpoison special case is skipped, and
-EFAULT is returned to user-space, causing Qemu or kvmtool to exit.

Instead, move this VM_FAULT_ to errno mapping code into a header file
and use it from faultin_page() and follow_hugetlb_page().

With this, KVM works as expected.

This isn't a problem for arm64 today as we haven't enabled
MEMORY_FAILURE, but I can't see any reason this doesn't happen on x86
too, so I think this should be a fix.  This doesn't apply earlier than
stable's v4.11.1 due to all sorts of cleanup.

[james.morse@arm.com: add vm_fault_to_errno() call to faultin_page()]
suggested.
  Link: http://lkml.kernel.org/r/20170525171035.16359-1-james.morse@arm.com
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170524160900.28786-1-james.morse@arm.comSigned-off-by: James Morse <james.morse@arm.com>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>	[4.11.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Kefeng reported that when running the follow test, the mlock count in
meminfo will increase permanently:

 [1] testcase
 linux:~ # cat test_mlockal
 grep Mlocked /proc/meminfo
  for j in `seq 0 10`
  do
 	for i in `seq 4 15`
 	do
 		./p_mlockall >> log &
 	done
 	sleep 0.2
 done
 # wait some time to let mlock counter decrease and 5s may not enough
 sleep 5
 grep Mlocked /proc/meminfo

 linux:~ # cat p_mlockall.c
 #include <sys/mman.h>
 #include <stdlib.h>
 #include <stdio.h>

 #define SPACE_LEN	4096

 int main(int argc, char ** argv)
 {
	 	int ret;
	 	void *adr = malloc(SPACE_LEN);
	 	if (!adr)
	 		return -1;

	 	ret = mlockall(MCL_CURRENT | MCL_FUTURE);
	 	printf("mlcokall ret = %d\n", ret);

	 	ret = munlockall();
	 	printf("munlcokall ret = %d\n", ret);

	 	free(adr);
	 	return 0;
	 }

In __munlock_pagevec() we should decrement NR_MLOCK for each page where
we clear the PageMlocked flag.  Commit 1ebb7cc6 ("mm: munlock: batch
NR_MLOCK zone state updates") has introduced a bug where we don't
decrement NR_MLOCK for pages where we clear the flag, but fail to
isolate them from the lru list (e.g.  when the pages are on some other
cpu's percpu pagevec).  Since PageMlocked stays cleared, the NR_MLOCK
accounting gets permanently disrupted by this.

Fix it by counting the number of page whose PageMlock flag is cleared.

Fixes: 1ebb7cc6 (" mm: munlock: batch NR_MLOCK zone state updates")
Link: http://lkml.kernel.org/r/1495678405-54569-1-git-send-email-xieyisheng1@huawei.comSigned-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Joern Engel <joern@logfs.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: zhongjiang <zhongjiang@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>