Skip to content

L
linux
Switch branch/tag
  1. 09 Oct, 2015 9 commits
    • Simon Guinot's avatar
      net: mvneta: fix DMA buffer unmapping in mvneta_rx() · 72ec9d91
      Simon Guinot authored 
      commit daf158d0 upstream.

This patch fixes a regression introduced by the commit a84e3289
("net: mvneta: fix refilling for Rx DMA buffers"). Due to this commit
the newly allocated Rx buffers are DMA-unmapped in place of those passed
to the networking stack. Obviously, this causes data corruptions.

This patch fixes the issue by ensuring that the right Rx buffers are
DMA-unmapped.
Reported-by: default avatarOren Laskin <oren@igneous.io>
Signed-off-by: default avatarSimon Guinot <simon.guinot@sequanux.org>
Fixes: a84e3289 ("net: mvneta: fix refilling for Rx DMA buffers")
Tested-by: default avatarOren Laskin <oren@igneous.io>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      72ec9d91
    • Peter Chen's avatar
      usb: chipidea: udc: using the correct stall implementation · daf99005
      Peter Chen authored 
      commit 56ffa1d1 upstream.

According to spec, there are functional and protocol stalls.

For functional stall, it is for bulk and interrupt endpoints,
below are cases for it:
- Host sends SET_FEATURE request for Set-Halt, the udc driver
needs to set stall, and return true unconditionally.
- The gadget driver may call usb_ep_set_halt to stall certain
endpoints, if there is a transfer in pending, the udc driver
should not set stall, and return -EAGAIN accordingly.
These two kinds of stall need to be cleared by host using CLEAR_FEATURE
request (Clear-Halt).

For protocol stall, it is for control endpoint, this stall will
be set if the control request has failed. This stall will be
cleared by next setup request (hardware will do it).

It fixed usbtest (drivers/usb/misc/usbtest.c) Test 13 "set/clear halt"
test failure, meanwhile, this change has been verified by
USB2 CV Compliance Test and MSC Tests.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: default avatarPeter Chen <peter.chen@freescale.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      daf99005
    • Jeff Mahoney's avatar
      btrfs: skip waiting on ordered range for special files · 5e948e5d
      Jeff Mahoney authored 
      commit a30e577c upstream.

In btrfs_evict_inode, we properly truncate the page cache for evicted
inodes but then we call btrfs_wait_ordered_range for every inode as well.
It's the right thing to do for regular files but results in incorrect
behavior for device inodes for block devices.

filemap_fdatawrite_range gets called with inode->i_mapping which gets
resolved to the block device inode before getting passed to
wbc_attach_fdatawrite_inode and ultimately to inode_to_bdi.  What happens
next depends on whether there's an open file handle associated with the
inode.  If there is, we write to the block device, which is unexpected
behavior.  If there isn't, we through normally and inode->i_data is used.
We can also end up racing against open/close which can result in crashes
when i_mapping points to a block device inode that has been closed.

Since there can't be any page cache associated with special file inodes,
it's safe to skip the btrfs_wait_ordered_range call entirely and avoid
the problem.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100911Tested-by: default avatarChristoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: default avatarJeff Mahoney <jeffm@suse.com>
Reviewed-by: default avatarFilipe Manana <fdmanana@suse.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      5e948e5d
    • Filipe Manana's avatar
      Btrfs: fix read corruption of compressed and shared extents · 5c0284ae
      Filipe Manana authored 
      commit 005efedf upstream.

If a file has a range pointing to a compressed extent, followed by
another range that points to the same compressed extent and a read
operation attempts to read both ranges (either completely or part of
them), the pages that correspond to the second range are incorrectly
filled with zeroes.

Consider the following example:

  File layout
  [0 - 8K]                      [8K - 24K]
      |                             |
      |                             |
   points to extent X,         points to extent X,
   offset 4K, length of 8K     offset 0, length 16K

  [extent X, compressed length = 4K uncompressed length = 16K]

If a readpages() call spans the 2 ranges, a single bio to read the extent
is submitted - extent_io.c:submit_extent_page() would only create a new
bio to cover the second range pointing to the extent if the extent it
points to had a different logical address than the extent associated with
the first range. This has a consequence of the compressed read end io
handler (compression.c:end_compressed_bio_read()) finish once the extent
is decompressed into the pages covering the first range, leaving the
remaining pages (belonging to the second range) filled with zeroes (done
by compression.c:btrfs_clear_biovec_end()).

So fix this by submitting the current bio whenever we find a range
pointing to a compressed extent that was preceded by a range with a
different extent map. This is the simplest solution for this corner
case. Making the end io callback populate both ranges (or more, if we
have multiple pointing to the same extent) is a much more complex
solution since each bio is tightly coupled with a single extent map and
the extent maps associated to the ranges pointing to the shared extent
can have different offsets and lengths.

The following test case for fstests triggers the issue:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_cloner

  rm -f $seqres.full

  test_clone_and_read_compressed_extent()
  {
      local mount_opts=$1

      _scratch_mkfs >>$seqres.full 2>&1
      _scratch_mount $mount_opts

      # Create a test file with a single extent that is compressed (the
      # data we write into it is highly compressible no matter which
      # compression algorithm is used, zlib or lzo).
      $XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 4K"        \
                      -c "pwrite -S 0xbb 4K 8K"        \
                      -c "pwrite -S 0xcc 12K 4K"       \
                      $SCRATCH_MNT/foo | _filter_xfs_io

      # Now clone our extent into an adjacent offset.
      $CLONER_PROG -s $((4 * 1024)) -d $((16 * 1024)) -l $((8 * 1024)) \
          $SCRATCH_MNT/foo $SCRATCH_MNT/foo

      # Same as before but for this file we clone the extent into a lower
      # file offset.
      $XFS_IO_PROG -f -c "pwrite -S 0xaa 8K 4K"         \
                      -c "pwrite -S 0xbb 12K 8K"        \
                      -c "pwrite -S 0xcc 20K 4K"        \
                      $SCRATCH_MNT/bar | _filter_xfs_io

      $CLONER_PROG -s $((12 * 1024)) -d 0 -l $((8 * 1024)) \
          $SCRATCH_MNT/bar $SCRATCH_MNT/bar

      echo "File digests before unmounting filesystem:"
      md5sum $SCRATCH_MNT/foo | _filter_scratch
      md5sum $SCRATCH_MNT/bar | _filter_scratch

      # Evicting the inode or clearing the page cache before reading
      # again the file would also trigger the bug - reads were returning
      # all bytes in the range corresponding to the second reference to
      # the extent with a value of 0, but the correct data was persisted
      # (it was a bug exclusively in the read path). The issue happened
      # only if the same readpages() call targeted pages belonging to the
      # first and second ranges that point to the same compressed extent.
      _scratch_remount

      echo "File digests after mounting filesystem again:"
      # Must match the same digests we got before.
      md5sum $SCRATCH_MNT/foo | _filter_scratch
      md5sum $SCRATCH_MNT/bar | _filter_scratch
  }

  echo -e "\nTesting with zlib compression..."
  test_clone_and_read_compressed_extent "-o compress=zlib"

  _scratch_unmount

  echo -e "\nTesting with lzo compression..."
  test_clone_and_read_compressed_extent "-o compress=lzo"

  status=0
  exit
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo<quwenruo@cn.fujitsu.com>
Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      5c0284ae
    • Carl Frederik Werner's avatar
      ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again · 2a440b8f
      Carl Frederik Werner authored 
      commit 3a2fa775 upstream.

Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio.

According to the OMAP35x Technical Reference Manual
  CONTROL_PADCONF_I2C3_SDA[15:0]  0x480021C4 mode0: i2c3_sda
  CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170
the pinmux address of gpio 170 must be 0x480021C6.

The former wrong address broke i2c3 (used by hdmi ddc), resulting in
kernel message:
  omap_i2c 48060000.i2c: controller timed out

Fixes: 8cecf52b ("ARM: omap3-beagle.dts: add display information")
Signed-off-by: default avatarCarl Frederik Werner <frederik@cfbw.eu>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      2a440b8f
    • Thomas Hellstrom's avatar
      drm/vmwgfx: Fix up user_dmabuf refcounting · 3c0e3ab2
      Thomas Hellstrom authored 
      commit 54c12bc3 upstream.

If user space calls unreference on a user_dmabuf it will typically
kill the struct ttm_base_object member which is responsible for the
user-space visibility. However the dmabuf part may still be alive and
refcounted. In some situations, like for shared guest-backed surface
referencing/opening, the driver may try to reference the
struct ttm_base_object member again, causing an immediate kernel warning
and a later kernel NULL pointer dereference.

Fix this by always maintaining a reference on the struct
ttm_base_object member, in situations where it might subsequently be
referenced.
Signed-off-by: default avatarThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: default avatarBrian Paul <brianp@vmware.com>
Reviewed-by: default avatarSinclair Yeh <syeh@vmware.com>
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      3c0e3ab2
    • Liu.Zhao's avatar
      USB: option: add ZTE PIDs · c918c41d
      Liu.Zhao authored 
      commit 19ab6bc5 upstream.

This is intended to add ZTE device PIDs on kernel.
Signed-off-by: default avatarLiu.Zhao <lzsos369@163.com>
[johan: sort the new entries ]
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      c918c41d
    • Guenter Roeck's avatar
      spi: Fix documentation of spi_alloc_master() · 2b43a460
      Guenter Roeck authored 
      commit a394d635 upstream.

Actually, spi_master_put() after spi_alloc_master() must _not_ be followed
by kfree(). The memory is already freed with the call to spi_master_put()
through spi_master_class, which registers a release function. Calling both
spi_master_put() and kfree() results in often nasty (and delayed) crashes
elsewhere in the kernel, often in the networking stack.

This reverts commit eb4af0f5.

Link to patch and concerns: https://lkml.org/lkml/2012/9/3/269
or
http://lkml.iu.edu/hypermail/linux/kernel/1209.0/00790.html

Alexey Klimov: This revert becomes valid after
94c69f76 when spi-imx.c
has been fixed and there is no need to call kfree() so comment
for spi_alloc_master() should be fixed.
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarAlexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      2b43a460
    • Tan, Jui Nee's avatar
      spi: spi-pxa2xx: Check status register to determine if SSSR_TINT is disabled · 6e32c6db
      Tan, Jui Nee authored 
      commit 02bc933e upstream.

On Intel Baytrail, there is case when interrupt handler get called, no SPI
message is captured. The RX FIFO is indeed empty when RX timeout pending
interrupt (SSSR_TINT) happens.

Use the BIOS version where both HSUART and SPI are on the same IRQ. Both
drivers are using IRQF_SHARED when calling the request_irq function. When
running two separate and independent SPI and HSUART application that
generate data traffic on both components, user will see messages like
below on the console:

  pxa2xx-spi pxa2xx-spi.0: bad message state in interrupt handler

This commit will fix this by first checking Receiver Time-out Interrupt,
if it is disabled, ignore the request and return without servicing.
Signed-off-by: default avatarTan, Jui Nee <jui.nee.tan@intel.com>
Acked-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      6e32c6db
  3. 06 Oct, 2015 24 commits
  5. 30 Sep, 2015 7 commits
    • Helge Deller's avatar
      parisc: Filter out spurious interrupts in PA-RISC irq handler · 634a6a28
      Helge Deller authored 
      commit b1b4e435 upstream.

When detecting a serial port on newer PA-RISC machines (with iosapic) we have a
long way to go to find the right IRQ line, registering it, then registering the
serial port and the irq handler for the serial port. During this phase spurious
interrupts for the serial port may happen which then crashes the kernel because
the action handler might not have been set up yet.

So, basically it's a race condition between the serial port hardware and the
CPU which sets up the necessary fields in the irq sructs. The main reason for
this race is, that we unmask the serial port irqs too early without having set
up everything properly before (which isn't easily possible because we need the
IRQ number to register the serial ports).

This patch is a work-around for this problem. It adds checks to the CPU irq
handler to verify if the IRQ action field has been initialized already. If not,
we just skip this interrupt (which isn't critical for a serial port at bootup).
The real fix would probably involve rewriting all PA-RISC specific IRQ code
(for CPU, IOSAPIC, GSC and EISA) to use IRQ domains with proper parenting of
the irq chips and proper irq enabling along this line.

This bug has been in the PA-RISC port since the beginning, but the crashes
happened very rarely with currently used hardware.  But on the latest machine
which I bought (a C8000 workstation), which uses the fastest CPUs (4 x PA8900,
1GHz) and which has the largest possible L1 cache size (64MB each), the kernel
crashed at every boot because of this race. So, without this patch the machine
would currently be unuseable.

For the record, here is the flow logic:
1. serial_init_chip() in 8250_gsc.c calls iosapic_serial_irq().
2. iosapic_serial_irq() calls txn_alloc_irq() to find the irq.
3. iosapic_serial_irq() calls cpu_claim_irq() to register the CPU irq
4. cpu_claim_irq() unmasks the CPU irq (which it shouldn't!)
5. serial_init_chip() then registers the 8250 port.
Problems:
- In step 4 the CPU irq shouldn't have been registered yet, but after step 5
- If serial irq happens between 4 and 5 have finished, the kernel will crash

Cc: linux-parisc@vger.kernel.org
Signed-off-by: default avatarHelge Deller <deller@gmx.de>
[ luis: backported to 3.16: used Helge's backport ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      634a6a28
    • Wilson Kok's avatar
      fib_rules: fix fib rule dumps across multiple skbs · de090271
      Wilson Kok authored 
      commit 41fc0143 upstream.

dump_rules returns skb length and not error.
But when family == AF_UNSPEC, the caller of dump_rules
assumes that it returns an error. Hence, when family == AF_UNSPEC,
we continue trying to dump on -EMSGSIZE errors resulting in
incorrect dump idx carried between skbs belonging to the same dump.
This results in fib rule dump always only dumping rules that fit
into the first skb.

This patch fixes dump_rules to return error so that we exit correctly
and idx is correctly maintained between skbs that are part of the
same dump.
Signed-off-by: default avatarWilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      de090271
    • Jesse Gross's avatar
      openvswitch: Zero flows on allocation. · 6d2b5595
      Jesse Gross authored 
      commit ae5f2fb1 upstream.

When support for megaflows was introduced, OVS needed to start
installing flows with a mask applied to them. Since masking is an
expensive operation, OVS also had an optimization that would only
take the parts of the flow keys that were covered by a non-zero
mask. The values stored in the remaining pieces should not matter
because they are masked out.

While this works fine for the purposes of matching (which must always
look at the mask), serialization to netlink can be problematic. Since
the flow and the mask are serialized separately, the uninitialized
portions of the flow can be encoded with whatever values happen to be
present.

In terms of functionality, this has little effect since these fields
will be masked out by definition. However, it leaks kernel memory to
userspace, which is a potential security vulnerability. It is also
possible that other code paths could look at the masked key and get
uninitialized data, although this does not currently appear to be an
issue in practice.

This removes the mask optimization for flows that are being installed.
This was always intended to be the case as the mask optimizations were
really targetting per-packet flow operations.

Fixes: 03f0d916 ("openvswitch: Mega flow implementation")
Signed-off-by: default avatarJesse Gross <jesse@nicira.com>
Acked-by: default avatarPravin B Shelar <pshelar@nicira.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      6d2b5595
    • Marcelo Ricardo Leitner's avatar
      sctp: fix race on protocol/netns initialization · eb084bd1
      Marcelo Ricardo Leitner authored 
      commit 8e2d61e0 upstream.

Consider sctp module is unloaded and is being requested because an user
is creating a sctp socket.

During initialization, sctp will add the new protocol type and then
initialize pernet subsys:

        status = sctp_v4_protosw_init();
        if (status)
                goto err_protosw_init;

        status = sctp_v6_protosw_init();
        if (status)
                goto err_v6_protosw_init;

        status = register_pernet_subsys(&sctp_net_ops);

The problem is that after those calls to sctp_v{4,6}_protosw_init(), it
is possible for userspace to create SCTP sockets like if the module is
already fully loaded. If that happens, one of the possible effects is
that we will have readers for net->sctp.local_addr_list list earlier
than expected and sctp_net_init() does not take precautions while
dealing with that list, leading to a potential panic but not limited to
that, as sctp_sock_init() will copy a bunch of blank/partially
initialized values from net->sctp.

The race happens like this:

     CPU 0                           |  CPU 1
  socket()                           |
   __sock_create                     | socket()
    inet_create                      |  __sock_create
     list_for_each_entry_rcu(        |
        answer, &inetsw[sock->type], |
        list) {                      |   inet_create
      /* no hits */                  |
     if (unlikely(err)) {            |
      ...                            |
      request_module()               |
      /* socket creation is blocked  |
       * the module is fully loaded  |
       */                            |
       sctp_init                     |
        sctp_v4_protosw_init         |
         inet_register_protosw       |
          list_add_rcu(&p->list,     |
                       last_perm);   |
                                     |  list_for_each_entry_rcu(
                                     |     answer, &inetsw[sock->type],
        sctp_v6_protosw_init         |     list) {
                                     |     /* hit, so assumes protocol
                                     |      * is already loaded
                                     |      */
                                     |  /* socket creation continues
                                     |   * before netns is initialized
                                     |   */
        register_pernet_subsys       |

Simply inverting the initialization order between
register_pernet_subsys() and sctp_v4_protosw_init() is not possible
because register_pernet_subsys() will create a control sctp socket, so
the protocol must be already visible by then. Deferring the socket
creation to a work-queue is not good specially because we loose the
ability to handle its errors.

So, as suggested by Vlad, the fix is to split netns initialization in
two moments: defaults and control socket, so that the defaults are
already loaded by when we register the protocol, while control socket
initialization is kept at the same moment it is today.

Fixes: 4db67e80 ("sctp: Make the address lists per network namespace")
Signed-off-by: default avatarVlad Yasevich <vyasevich@gmail.com>
Signed-off-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      eb084bd1
    • Daniel Borkmann's avatar
      netlink, mmap: transform mmap skb into full skb on taps · ce90dd09
      Daniel Borkmann authored 
      commit 1853c949 upstream.

Ken-ichirou reported that running netlink in mmap mode for receive in
combination with nlmon will throw a NULL pointer dereference in
__kfree_skb() on nlmon_xmit(), in my case I can also trigger an "unable
to handle kernel paging request". The problem is the skb_clone() in
__netlink_deliver_tap_skb() for skbs that are mmaped.

I.e. the cloned skb doesn't have a destructor, whereas the mmap netlink
skb has it pointed to netlink_skb_destructor(), set in the handler
netlink_ring_setup_skb(). There, skb->head is being set to NULL, so
that in such cases, __kfree_skb() doesn't perform a skb_release_data()
via skb_release_all(), where skb->head is possibly being freed through
kfree(head) into slab allocator, although netlink mmap skb->head points
to the mmap buffer. Similarly, the same has to be done also for large
netlink skbs where the data area is vmalloced. Therefore, as discussed,
make a copy for these rather rare cases for now. This fixes the issue
on my and Ken-ichirou's test-cases.

Reference: http://thread.gmane.org/gmane.linux.network/371129
Fixes: bcbde0d4 ("net: netlink: virtual tap device management")
Reported-by: default avatarKen-ichirou MATSUZAWA <chamaken@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Tested-by: default avatarKen-ichirou MATSUZAWA <chamaken@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      ce90dd09
    • Richard Laing's avatar
      net/ipv6: Correct PIM6 mrt_lock handling · 0fdc68d7
      Richard Laing authored 
      commit 25b4a44c upstream.

In the IPv6 multicast routing code the mrt_lock was not being released
correctly in the MFC iterator, as a result adding or deleting a MIF would
cause a hang because the mrt_lock could not be acquired.

This fix is a copy of the code for the IPv4 case and ensures that the lock
is released correctly.
Signed-off-by: default avatarRichard Laing <richard.laing@alliedtelesis.co.nz>
Acked-by: default avatarCong Wang <cwang@twopensource.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      0fdc68d7
    • Eugene Shatokhin's avatar
      usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared · 781a95d3
      Eugene Shatokhin authored 
      commit f50791ac upstream.

It is needed to check EVENT_NO_RUNTIME_PM bit of dev->flags in
usbnet_stop(), but its value should be read before it is cleared
when dev->flags is set to 0.

The problem was spotted and the fix was provided by
Oliver Neukum <oneukum@suse.de>.
Signed-off-by: default avatarEugene Shatokhin <eugene.shatokhin@rosalab.ru>
Acked-by: default avatarOliver Neukum <oneukum@suse.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      781a95d3
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7