In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20220922111228.36355-7-yuancan@huawei.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20220922111228.36355-4-yuancan@huawei.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

These two error paths need to call of_node_put(child_node) before
returning.

Fixes: edd473d4 ("phy: ti: phy-j721e-wiz: add support for j7200-wiz-10g")
Fixes: 7ae14cf5 ("phy: ti: j721e-wiz: Implement DisplayPort mode to the wiz driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/YyxFI8aW23IC/21U@kiliSigned-off-by: Vinod Koul <vkoul@kernel.org>

Remove private register access helpers, use the common ones instead.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-19-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use MediaTek phy's common helper to access registers, then we can remove
mipi-dsi's I/O helpers.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-18-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use GENMASK() macro to generate bits mask
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-17-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use MediaTek phy's common helper to access registers, then we can remove
mipi-dsi's I/O helpers.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-16-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use FIELD_PREP() macro to prepare bits field value, then no need define
macros of bits offset.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-15-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use GENMASK() macro to generate bits mask
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-14-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Remove private register access helpers, use the common ones instead.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-13-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use MediaTek phy's common helper to access registers, then we can remove
hdmi's I/O helpers.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-12-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use FIELD_PREP() macro to prepare bits field value, then no need define
macros of bits offset.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-11-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use GENMASK() macro to generate bits mask
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-10-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use MediaTek phy's common helper to access registers, then we can remove
hdmi's I/O helpers.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-9-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use FIELD_PREP() macro to prepare bits field value, then no need define
macros of bits offset.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-8-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use GENMASK() and BIT() macros to generate mask and bits
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-7-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The new helper will use FIELD_PREP() macro to prepare bits value
according to mask, then we no need do it anymore.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-6-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

No need define private register access helpers, use common ones defined
in phy-mtk-io.h
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220920090038.15133-5-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Prefer to make use of FIELD_PREP() macro to prepare bitfield value,
then no need local ones anymore.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220920090038.15133-4-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Prefer to make use of FIELD_PREP() macro to prepare bitfield value,
then no need local ones anymore.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220920090038.15133-3-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Due to FIELD_PREP() macro can be used to prepare a bitfield value,
local ones can be remove; add the new helper to make bitfield update
easier.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220920090038.15133-2-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Drop the DP_COM control block flag from the configuration data, which is
set for all combo PHYs and hence no longer needed since the QMP driver
split.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-18-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

For legacy reasons, there are two configuration parameters that appear
to describe the number of lanes a PHY has, even if "nlanes" was actually
used for a different purpose.

Replace them both with a new field simply named "lanes".
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-17-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

For legacy reasons, there are two configuration parameters that describe
the number of lanes a PHY has.

Replace them both with a new field simply named "lanes".
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-16-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

For legacy reasons, there are two configuration parameters that appear
to describe the number of lanes a PHY has, even if "nlanes" was actually
used for a different purpose.

Replace them both with a new field simply named "lanes".
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-15-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The nlanes configuration parameter is really the number of PHYs provided
by this QMP block on MSM8996. Rename it accordingly.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-14-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

For legacy reasons, there are two configuration parameters that describe
the number of lanes a PHY has.

Replace them both with a new field simply named "lanes".
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-13-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Only the MSM8996 PCIe QMP driver uses the index field so drop it from
the other drivers.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-12-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Drop the unused mask_com_pcs_ready field from struct qmp_phy_cfg.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-11-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Drop the unused mode field from struct qmp_phy.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-10-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Drop the removed mode field from the struct qmp_phy kernel doc.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-9-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Only the combo QMP driver needs a forward declaration of struct qmp_phy.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-8-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Drop the unnecessary PHY init and exit callback wrappers.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-7-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Drop the unnecessary PHY init and exit callback wrappers.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-6-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The configuration PHY type is no longer needed since the QMP driver
split so drop it from the configuration and suspend callbacks.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-5-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The configuration PHY type is no longer used since the QMP driver split
so drop it from the configuration.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-4-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The configuration PHY type is no longer used since the QMP driver split
so drop it from the configuration.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-3-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The configuration PHY type is no longer used since the QMP driver split
so drop it from the configurations.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-2-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

When multiple serdes instances are initialized the first will succeed but
additional will conflict over clocks names and probing fails.
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20220909200026.3422-1-mranostay@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The PHY type is not set if the index is non zero, prepare type
value according to the index, like as mask value.

Fixes: 39099a44 ("phy: phy-mtk-tphy: support type switch by pericfg")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220914060746.10004-7-chunfeng.yun@mediatek.comSigned-off-by: Vinod Koul <vkoul@kernel.org>