Skip to content

L
linux
Switch branch/tag
  1. 10 Sep, 2017 12 commits
  3. 01 Sep, 2017 8 commits
  5. 05 Aug, 2017 2 commits
  7. 31 Jul, 2017 18 commits
    • Sasha Levin's avatar
      ipvs: SNAT packet replies only for NATed connections · 28d8e1bc
      Sasha Levin authored 
      [ Upstream commit 3c5ab3f3 ]

We do not check if packet from real server is for NAT
connection before performing SNAT. This causes problems
for setups that use DR/TUN and allow local clients to
access the real server directly, for example:

- local client in director creates IPVS-DR/TUN connection
CIP->VIP and the request packets are routed to RIP.
Talks are finished but IPVS connection is not expired yet.

- second local client creates non-IPVS connection CIP->RIP
with same reply tuple RIP->CIP and when replies are received
on LOCAL_IN we wrongly assign them for the first client
connection because RIP->CIP matches the reply direction.
As result, IPVS SNATs replies for non-IPVS connections.

The problem is more visible to local UDP clients but in rare
cases it can happen also for TCP or remote clients when the
real server sends the reply traffic via the director.

So, better to be more precise for the reply traffic.
As replies are not expected for DR/TUN connections, better
to not touch them.
Reported-by: default avatarNick Moriarty <nick.moriarty@york.ac.uk>
Tested-by: default avatarNick Moriarty <nick.moriarty@york.ac.uk>
Signed-off-by: default avatarJulian Anastasov <ja@ssi.bg>
Signed-off-by: default avatarSimon Horman <horms@verge.net.au>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      28d8e1bc
    • Sasha Levin's avatar
      Revert "dmaengine: ep93xx: Don't drain the transfers in terminate_all()" · 4e8a4d30
      Sasha Levin authored 
      This reverts commit 81402e40.
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      4e8a4d30
    • Ian Abbott's avatar
      staging: comedi: ni_mio_common: fix E series ni_ai_insn_read() data · 947a97e2
      Ian Abbott authored 
      [ Upstream commit 857a6610 ]

Commit 0557344e ("staging: comedi: ni_mio_common: fix local var for
32-bit read") changed the type of local variable `d` from `unsigned
short` to `unsigned int` to fix a bug introduced in
commit 9c340ac9 ("staging: comedi: ni_stc.h: add read/write
callbacks to struct ni_private") when reading AI data for NI PCI-6110
and PCI-6111 cards.  Unfortunately, other parts of the function rely on
the variable being `unsigned short` when an offset value in local
variable `signbits` is added to `d` before writing the value to the
`data` array:

			d += signbits;
		  	data[n] = d;

The `signbits` variable will be non-zero in bipolar mode, and is used to
convert the hardware's 2's complement, 16-bit numbers to Comedi's
straight binary sample format (with 0 representing the most negative
voltage).  This breaks because `d` is now 32 bits wide instead of 16
bits wide, so after the addition of `signbits`, `data[n]` ends up being
set to values above 65536 for negative voltages.  This affects all
supported "E series" cards except PCI-6143 (and PXI-6143). Fix it by
ANDing the value written to the `data[n]` with the mask 0xffff.

Fixes: 0557344e ("staging: comedi: ni_mio_common: fix local var for 32-bit read")
Signed-off-by: default avatarIan Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      947a97e2
    • Jim Mattson's avatar
      kvm: vmx: Do not disable intercepts for BNDCFGS · 2717d19c
      Jim Mattson authored 
      [ Upstream commit a8b6fda3 ]

The MSR permission bitmaps are shared by all VMs. However, some VMs
may not be configured to support MPX, even when the host does. If the
host supports VMX and the guest does not, we should intercept accesses
to the BNDCFGS MSR, so that we can synthesize a #GP
fault. Furthermore, if the host does not support MPX and the
"ignore_msrs" kvm kernel parameter is set, then we should intercept
accesses to the BNDCFGS MSR, so that we can skip over the rdmsr/wrmsr
without raising a #GP fault.

Fixes: da8999d3 ("KVM: x86: Intel MPX vmx and msr handle")
Signed-off-by: default avatarJim Mattson <jmattson@google.com>
Signed-off-by: default avatarRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      2717d19c
    • Pavankumar Kondeti's avatar
      tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results · e532444e
      Pavankumar Kondeti authored 
      [ Upstream commit c59f29cb ]

The 's' flag is supposed to indicate that a softirq is running. This
can be detected by testing the preempt_count with SOFTIRQ_OFFSET.

The current code tests the preempt_count with SOFTIRQ_MASK, which
would be true even when softirqs are disabled but not serving a
softirq.

Link: http://lkml.kernel.org/r/1481300417-3564-1-git-send-email-pkondeti@codeaurora.orgSigned-off-by: default avatarPavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      e532444e
    • Dan Carpenter's avatar
      PM / QoS: return -EINVAL for bogus strings · cf86f4f6
      Dan Carpenter authored 
      [ Upstream commit 2ca30331 ]

In the current code, if the user accidentally writes a bogus command to
this sysfs file, then we set the latency tolerance to an uninitialized
variable.

Fixes: 2d984ad1 (PM / QoS: Introcuce latency tolerance device PM QoS type)
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Acked-by: default avatarPavel Machek <pavel@ucw.cz>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      cf86f4f6
    • Lauro Ramos Venancio's avatar
      sched/topology: Optimize build_group_mask() · 94987721
      Lauro Ramos Venancio authored 
      [ Upstream commit f32d782e ]

The group mask is always used in intersection with the group CPUs. So,
when building the group mask, we don't have to care about CPUs that are
not part of the group.
Signed-off-by: default avatarLauro Ramos Venancio <lvenanci@redhat.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lwang@redhat.com
Cc: riel@redhat.com
Link: http://lkml.kernel.org/r/1492717903-5195-2-git-send-email-lvenanci@redhat.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      94987721
    • Peter Zijlstra's avatar
      sched/topology: Fix overlapping sched_group_mask · 87de53ef
      Peter Zijlstra authored 
      [ Upstream commit 73bb059f ]

The point of sched_group_mask is to select those CPUs from
sched_group_cpus that can actually arrive at this balance domain.

The current code gets it wrong, as can be readily demonstrated with a
topology like:

  node   0   1   2   3
    0:  10  20  30  20
    1:  20  10  20  30
    2:  30  20  10  20
    3:  20  30  20  10

Where (for example) domain 1 on CPU1 ends up with a mask that includes
CPU0:

  [] CPU1 attaching sched-domain:
  []  domain 0: span 0-2 level NUMA
  []   groups: 1 (mask: 1), 2, 0
  []   domain 1: span 0-3 level NUMA
  []    groups: 0-2 (mask: 0-2) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072)

This causes sched_balance_cpu() to compute the wrong CPU and
consequently should_we_balance() will terminate early resulting in
missed load-balance opportunities.

The fixed topology looks like:

  [] CPU1 attaching sched-domain:
  []  domain 0: span 0-2 level NUMA
  []   groups: 1 (mask: 1), 2, 0
  []   domain 1: span 0-3 level NUMA
  []    groups: 0-2 (mask: 1) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072)

(note: this relies on OVERLAP domains to always have children, this is
 true because the regular topology domains are still here -- this is
 before degenerate trimming)
Debugged-by: default avatarLauro Ramos Venancio <lvenanci@redhat.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: e3589f6c ("sched: Allow for overlapping sched_domain spans")
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      87de53ef
    • Horia Geantă's avatar
      crypto: caam - fix signals handling · 36feca8c
      Horia Geantă authored 
      [ Upstream commit 7459e1d2 ]

Driver does not properly handle the case when signals interrupt
wait_for_completion_interruptible():
-it does not check for return value
-completion structure is allocated on stack; in case a signal interrupts
the sleep, it will go out of scope, causing the worker thread
(caam_jr_dequeue) to fail when it accesses it

wait_for_completion_interruptible() is replaced with uninterruptable
wait_for_completion().
We choose to block all signals while waiting for I/O (device executing
the split key generation job descriptor) since the alternative - in
order to have a deterministic device state - would be to flush the job
ring (aborting *all* in-progress jobs).

Cc: <stable@vger.kernel.org>
Fixes: 045e3678 ("crypto: caam - ahash hmac support")
Fixes: 4c1ec1f9 ("crypto: caam - refactor key_gen, sg")
Signed-off-by: default avatarHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      36feca8c
    • Gilad Ben-Yossef's avatar
      crypto: atmel - only treat EBUSY as transient if backlog · f04dc46b
      Gilad Ben-Yossef authored 
      [ Upstream commit 1606043f ]

The Atmel SHA driver was treating -EBUSY as indication of queueing
to backlog without checking that backlog is enabled for the request.

Fix it by checking request flags.

Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      f04dc46b
    • Martin Hicks's avatar
      crypto: talitos - Extend max key length for SHA384/512-HMAC and AEAD · 05398f6d
      Martin Hicks authored 
      [ Upstream commit 03d2c511 ]

An updated patch that also handles the additional key length requirements
for the AEAD algorithms.

The max keysize is not 96.  For SHA384/512 it's 128, and for the AEAD
algorithms it's longer still.  Extend the max keysize for the
AEAD size for AES256 + HMAC(SHA512).

Cc: <stable@vger.kernel.org> # 3.6+
Fixes: 357fb605 ("crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms")
Signed-off-by: default avatarMartin Hicks <mort@bork.org>
Acked-by: default avatarHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      05398f6d
    • Josh Zimmerman's avatar
      Add "shutdown" to "struct class". · 570bc1b5
      Josh Zimmerman authored 
      [ Upstream commit f77af151 ]

The TPM class has some common shutdown code that must be executed for
all drivers. This adds some needed functionality for that.
Signed-off-by: default avatarJosh Zimmerman <joshz@google.com>
Acked-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Fixes: 74d6b3ce ("tpm: fix suspend/resume paths for TPM 2.0")
Reviewed-by: default avatarJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: default avatarJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: default avatarJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: default avatarJames Morris <james.l.morris@oracle.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      570bc1b5
    • Eric W. Biederman's avatar
      mnt: Make propagate_umount less slow for overlapping mount propagation trees · 295f2370
      Eric W. Biederman authored 
      [ Upstream commit 296990de ]

Andrei Vagin pointed out that time to executue propagate_umount can go
non-linear (and take a ludicrious amount of time) when the mount
propogation trees of the mounts to be unmunted by a lazy unmount
overlap.

Make the walk of the mount propagation trees nearly linear by
remembering which mounts have already been visited, allowing
subsequent walks to detect when walking a mount propgation tree or a
subtree of a mount propgation tree would be duplicate work and to skip
them entirely.

Walk the list of mounts whose propgatation trees need to be traversed
from the mount highest in the mount tree to mounts lower in the mount
tree so that odds are higher that the code will walk the largest trees
first, allowing later tree walks to be skipped entirely.

Add cleanup_umount_visitation to remover the code's memory of which
mounts have been visited.

Add the functions last_slave and skip_propagation_subtree to allow
skipping appropriate parts of the mount propagation tree without
needing to change the logic of the rest of the code.

A script to generate overlapping mount propagation trees:

$ cat runs.h
set -e
mount -t tmpfs zdtm /mnt
mkdir -p /mnt/1 /mnt/2
mount -t tmpfs zdtm /mnt/1
mount --make-shared /mnt/1
mkdir /mnt/1/1

iteration=10
if [ -n "$1" ] ; then
	iteration=$1
fi

for i in $(seq $iteration); do
	mount --bind /mnt/1/1 /mnt/1/1
done

mount --rbind /mnt/1 /mnt/2

TIMEFORMAT='%Rs'
nr=$(( ( 2 ** ( $iteration + 1 ) ) + 1 ))
echo -n "umount -l /mnt/1 -> $nr        "
time umount -l /mnt/1

nr=$(cat /proc/self/mountinfo | grep zdtm | wc -l )
time umount -l /mnt/2

$ for i in $(seq 9 19); do echo $i; unshare -Urm bash ./run.sh $i; done

Here are the performance numbers with and without the patch:

     mhash |  8192   |  8192  | 1048576 | 1048576
    mounts | before  | after  |  before | after
    ------------------------------------------------
      1025 |  0.040s | 0.016s |  0.038s | 0.019s
      2049 |  0.094s | 0.017s |  0.080s | 0.018s
      4097 |  0.243s | 0.019s |  0.206s | 0.023s
      8193 |  1.202s | 0.028s |  1.562s | 0.032s
     16385 |  9.635s | 0.036s |  9.952s | 0.041s
     32769 | 60.928s | 0.063s | 44.321s | 0.064s
     65537 |         | 0.097s |         | 0.097s
    131073 |         | 0.233s |         | 0.176s
    262145 |         | 0.653s |         | 0.344s
    524289 |         | 2.305s |         | 0.735s
   1048577 |         | 7.107s |         | 2.603s

Andrei Vagin reports fixing the performance problem is part of the
work to fix CVE-2016-6213.

Cc: stable@vger.kernel.org
Fixes: a05964f3 ("[PATCH] shared mounts handling: umount")
Reported-by: default avatarAndrei Vagin <avagin@openvz.org>
Reviewed-by: default avatarAndrei Vagin <avagin@virtuozzo.com>
Signed-off-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      295f2370
    • Eric W. Biederman's avatar
      mnt: In propgate_umount handle visiting mounts in any order · dc5ce95b
      Eric W. Biederman authored 
      [ Upstream commit 99b19d16 ]

While investigating some poor umount performance I realized that in
the case of overlapping mount trees where some of the mounts are locked
the code has been failing to unmount all of the mounts it should
have been unmounting.

This failure to unmount all of the necessary
mounts can be reproduced with:

$ cat locked_mounts_test.sh

mount -t tmpfs test-base /mnt
mount --make-shared /mnt
mkdir -p /mnt/b

mount -t tmpfs test1 /mnt/b
mount --make-shared /mnt/b
mkdir -p /mnt/b/10

mount -t tmpfs test2 /mnt/b/10
mount --make-shared /mnt/b/10
mkdir -p /mnt/b/10/20

mount --rbind /mnt/b /mnt/b/10/20

unshare -Urm --propagation unchaged /bin/sh -c 'sleep 5; if [ $(grep test /proc/self/mountinfo | wc -l) -eq 1 ] ; then echo SUCCESS ; else echo FAILURE ; fi'
sleep 1
umount -l /mnt/b
wait %%

$ unshare -Urm ./locked_mounts_test.sh

This failure is corrected by removing the prepass that marks mounts
that may be umounted.

A first pass is added that umounts mounts if possible and if not sets
mount mark if they could be unmounted if they weren't locked and adds
them to a list to umount possibilities.  This first pass reconsiders
the mounts parent if it is on the list of umount possibilities, ensuring
that information of umoutability will pass from child to mount parent.

A second pass then walks through all mounts that are umounted and processes
their children unmounting them or marking them for reparenting.

A last pass cleans up the state on the mounts that could not be umounted
and if applicable reparents them to their first parent that remained
mounted.

While a bit longer than the old code this code is much more robust
as it allows information to flow up from the leaves and down
from the trunk making the order in which mounts are encountered
in the umount propgation tree irrelevant.

Cc: stable@vger.kernel.org
Fixes: 0c56fe31 ("mnt: Don't propagate unmounts to locked mounts")
Reviewed-by: default avatarAndrei Vagin <avagin@virtuozzo.com>
Signed-off-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      dc5ce95b
    • Eric W. Biederman's avatar
      mnt: In umount propagation reparent in a separate pass · 8a012b92
      Eric W. Biederman authored 
      [ Upstream commit 570487d3 ]

It was observed that in some pathlogical cases that the current code
does not unmount everything it should.  After investigation it
was determined that the issue is that mnt_change_mntpoint can
can change which mounts are available to be unmounted during mount
propagation which is wrong.

The trivial reproducer is:
$ cat ./pathological.sh

mount -t tmpfs test-base /mnt
cd /mnt
mkdir 1 2 1/1
mount --bind 1 1
mount --make-shared 1
mount --bind 1 2
mount --bind 1/1 1/1
mount --bind 1/1 1/1
echo
grep test-base /proc/self/mountinfo
umount 1/1
echo
grep test-base /proc/self/mountinfo

$ unshare -Urm ./pathological.sh

The expected output looks like:
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

The output without the fix looks like:
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

That last mount in the output was in the propgation tree to be unmounted but
was missed because the mnt_change_mountpoint changed it's parent before the walk
through the mount propagation tree observed it.

Cc: stable@vger.kernel.org
Fixes: 1064f874 ("mnt: Tuck mounts under others instead of creating shadow/side mounts.")
Acked-by: default avatarAndrei Vagin <avagin@virtuozzo.com>
Reviewed-by: default avatarRam Pai <linuxram@us.ibm.com>
Signed-off-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      8a012b92
    • Adam Borowski's avatar
      vt: fix unchecked __put_user() in tioclinux ioctls · e3400a3c
      Adam Borowski authored 
      [ Upstream commit 6987dc8a ]

Only read access is checked before this call.

Actually, at the moment this is not an issue, as every in-tree arch does
the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU
to tell them apart, but this wasn't the case in the past and may happen
again on some odd arch in the future.

If anyone cares about 3.7 and earlier, this is a security hole (untested)
on real 80386 CPUs.
Signed-off-by: default avatarAdam Borowski <kilobyte@angband.pl>
CC: stable@vger.kernel.org # v3.7-
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      e3400a3c
    • Kees Cook's avatar
      exec: Limit arg stack to at most 75% of _STK_LIM · d5e990d9
      Kees Cook authored 
      [ Upstream commit da029c11 ]

To avoid pathological stack usage or the need to special-case setuid
execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB).
Signed-off-by: default avatarKees Cook <keescook@chromium.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      d5e990d9
    • Kees Cook's avatar
      s390: reduce ELF_ET_DYN_BASE · 8c14bc2e
      Kees Cook authored 
      [ Upstream commit a73dc537 ]

Now that explicitly executed loaders are loaded in the mmap region, we
have more freedom to decide where we position PIE binaries in the
address space to avoid possible collisions with mmap or stack regions.

For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit
address space for 32-bit pointers.  On 32-bit use 4MB, which is the
traditional x86 minimum load location, likely to avoid historically
requiring a 4MB page table entry when only a portion of the first 4MB
would be used (since the NULL address is avoided).  For s390 the
position could be 0x10000, but that is needlessly close to the NULL
address.

Link: http://lkml.kernel.org/r/1498154792-49952-5-git-send-email-keescook@chromium.orgSigned-off-by: default avatarKees Cook <keescook@chromium.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      8c14bc2e
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7