When TLB flush hypercalls (HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX are
issued in 'XMM fast' mode, the maximum number of allowed sparse_banks is
not 'HV_HYPERCALL_MAX_XMM_REGISTERS - 1' (5) but twice as many (10) as each
XMM register is 128 bit long and can hold two 64 bit long banks.

Cc: stable@vger.kernel.org # 5.14.x
Fixes: 5974565b ("KVM: x86: kvm_hv_flush_tlb use inputs from XMM registers")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220222154642.684285-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

'struct kvm_hv_hcall' has all the required information already,
there's no need to pass 'ex' additionally.

No functional change intended.

Cc: stable@vger.kernel.org # 5.14.x
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220222154642.684285-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

'struct kvm_hv_hcall' has all the required information already,
there's no need to pass 'ex' additionally.

No functional change intended.

Cc: stable@vger.kernel.org # 5.14.x
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220222154642.684285-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull input fix from Dmitry Torokhov:
 "A small fixup to the Zinitix touchscreen driver to avoid enabling the
  IRQ line before we successfully requested it"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: zinitix - make sure the IRQ is allocated before it gets enabled

Pull ARM SoC fix from Olof Johansson:
 "One more fix for 5.16

  I had missed one patch when I sent up what I thought was the last
  batch of fixes for this release. This one fixes issues on the
  Raspberry Pi platforms due to gpio init changes this release, so
  hopefully we can get it merged before final release is cut"

* tag 'soc-fixes-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: gpio-ranges property is now required

Merge tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Revert "libtraceevent: Increase libtraceevent logging when verbose",
   breaks the build with libtraceevent-1.3.0, i.e. when building with
   'LIBTRACEEVENT_DYNAMIC=1'.

 - Avoid early exit in 'perf trace' due to running SIGCHLD handler
   before it makes sense to. It can happen when using a BPF source code
   event that have to be first built into an object file.

* tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  Revert "libtraceevent: Increase libtraceevent logging when verbose"
  perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to

This reverts commit f7d6779d.

This bisected regression has impacted suspend-resume stability
since 5.15-rc1. It regressed -stable via 5.14.10.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215315
Fixes: f7d6779d ("drm/amdgpu: stop scheduler when calling hw_fini (v2)")
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # 5.14+
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since irq request is the last thing in the driver probe, it happens
later than the input device registration. This means that there is a
small time window where if the open method is called the driver will
attempt to enable not yet available irq.

Fix that by moving the irq request before the input device registration.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 26822652 ("Input: add zinitix touchscreen driver")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20220106072840.36851-2-nikita@trvn.ruSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Since [1], added in 5.7, the absence of a gpio-ranges property has
prevented GPIOs from being restored to inputs when released.
Add those properties for BCM283x and BCM2711 devices.

[1] commit 2ab73c6d ("gpio: Support GPIO controllers without
    pin-ranges")

Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org
Fixes: 2ab73c6d ("gpio: Support GPIO controllers without pin-ranges")
Fixes: 266423e6 ("pinctrl: bcm2835: Change init order for gpio hogs")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206092237.4105895-3-phil@raspberrypi.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull ARM SoC fixes from Olof Johansson:
 "A few more fixes have come in, nothing overly severe but would be good
  to get in by final release:

   - More specific compatible fields on the qspi controller for socfpga,
     to enable quirks in the driver

   - A runtime PM fix for Renesas to fix mismatched reference counts on
     errors"

* tag 'soc-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: socfpga: change qspi to "intel,socfpga-qspi"
  dt-bindings: spi: cadence-quadspi: document "intel,socfpga-qspi"
  reset: renesas: Fix Runtime PM usage

Pull i2c fixes from Wolfram Sang:
 "Fix the regression with AMD GPU suspend by reverting the
  handling of bus regulators in the I2C core.

  Also, there is a fix for the MPC driver to prevent an
  out-of-bound-access"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Revert "i2c: core: support bus regulator controlling in adapter"
  i2c: mpc: Avoid out of bounds memory access

Pull power supply fixes from Sebastian Reichel:
 "Three fixes for the 5.16 cycle:

   - Avoid going beyond last capacity in the power-supply core

   - Replace 1E6L with NSEC_PER_MSEC to avoid floating point calculation
     in LLVM resulting in a build failure

   - Fix ADC measurements in bq25890 charger driver"

* tag 'for-v5.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: reset: ltc2952: Fix use of floating point literals
  power: bq25890: Enable continuous conversion for ADC at charging
  power: supply: core: Break capacity loop

Pull xfs fix from Darrick Wong:

 - Make the old ALLOCSP ioctl behave in a consistent manner with newer
   syscalls like fallocate.

* tag 'xfs-5.16-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: map unwritten blocks in XFS_IOC_{ALLOC,FREE}SP just like fallocate

Pull cgroup fixes from Tejun Heo:
 "This contains the cgroup.procs permission check fixes so that they use
  the credentials at the time of open rather than write, which also
  fixes the cgroup namespace lifetime bug"

* 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  selftests: cgroup: Test open-time cgroup namespace usage for migration checks
  selftests: cgroup: Test open-time credential usage for migration checks
  selftests: cgroup: Make cg_create() use 0755 for permission instead of 0644
  cgroup: Use open-time cgroup namespace for process migration perm checks
  cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv
  cgroup: Use open-time credentials for process migraton perm checks

Pull block fix from Jens Axboe:
 "Just the md bitmap regression this time"

* tag 'block-5.16-2022-01-07' of git://git.kernel.dk/linux-block:
  md/raid1: fix missing bitmap update w/o WriteMostly devices

Pull EDAC fix from Tony Luck:
 "Fix 10nm EDAC driver to release and unmap resources on systems without
  HBM"

* tag 'edac_urgent_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/i10nm: Release mdev/mbase when failing to detect HBM

This largely reverts commit 5a7b95fb. It
breaks suspend with AMD GPUs, and we couldn't incrementally fix it. So,
let's remove the code and go back to the drawing board. We keep the
header extension to not break drivers already populating the regulator.
We expect to re-add the code handling it soon.

Fixes: 5a7b95fb ("i2c: core: support bus regulator controlling in adapter")
Reported-by: "Tareque Md.Hanif" <tarequemd.hanif@yahoo.com>
Link: https://lore.kernel.org/r/1295184560.182511.1639075777725@mail.yahoo.comReported-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Link: https://lore.kernel.org/r/7143a7147978f4104171072d9f5225d2ce355ec1.camel@yandex.ru
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1850Tested-by: "Tareque Md.Hanif" <tarequemd.hanif@yahoo.com>
Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: <stable@vger.kernel.org> # 5.14+

This reverts commit 08efcb4a.

This breaks the build as it will prefer using libbpf-devel header files,
even when not using LIBBPF_DYNAMIC=1, breaking the build.

This was detected on OpenSuSE Tumbleweed with libtraceevent-devel 1.3.0,
as described by Jiri Slaby:

=======================================================================
It breaks build with LIBTRACEEVENT_DYNAMIC and version 1.3.0:
> util/debug.c: In function ‘perf_debug_option’:
> util/debug.c:243:17: error: implicit declaration of function
‘tep_set_loglevel’ [-Werror=implicit-function-declaration]
>   243 |                 tep_set_loglevel(TEP_LOG_INFO);
>       |                 ^~~~~~~~~~~~~~~~
> util/debug.c:243:34: error: ‘TEP_LOG_INFO’ undeclared (first use in this
function); did you mean ‘TEP_PRINT_INFO’?
>   243 |                 tep_set_loglevel(TEP_LOG_INFO);
>       |                                  ^~~~~~~~~~~~
>       |                                  TEP_PRINT_INFO
> util/debug.c:243:34: note: each undeclared identifier is reported only once
for each function it appears in
> util/debug.c:245:34: error: ‘TEP_LOG_DEBUG’ undeclared (first use in this
function)
>   245 |                 tep_set_loglevel(TEP_LOG_DEBUG);
>       |                                  ^~~~~~~~~~~~~
> util/debug.c:247:34: error: ‘TEP_LOG_ALL’ undeclared (first use in this
function)
>   247 |                 tep_set_loglevel(TEP_LOG_ALL);
>       |                                  ^~~~~~~~~~~

It is because the gcc's command line looks like:
gcc
...
-I/home/abuild/rpmbuild/BUILD/tools/lib/
...
-DLIBTRACEEVENT_VERSION=65790
...
=======================================================================

The proper way to fix this is more involved and so not suitable for this
late in the 5.16-rc stage.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/lkml/bc2b0786-8965-1bcd-2316-9d9bb37b9c31@kernel.org
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/lkml/YddGjjmlMZzxUZbN@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When running 'perf trace' with an BPF object like:

  # perf trace -e openat,tools/perf/examples/bpf/hello.c

the event parsing eventually calls llvm__get_kbuild_opts() that runs a
script and that ends up with SIGCHLD delivered to the 'perf trace'
handler, which assumes the workload process is done and quits 'perf
trace'.

Move the SIGCHLD handler setup directly to trace__run(), where the event
is parsed and the object is already compiled.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Christy Lee <christyc.y.lee@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220106222030.227499-1-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull kvm fixes from Paolo Bonzini:
 "Two small fixes for x86:

   - lockdep WARN due to missing lock nesting annotation

   - NULL pointer dereference when accessing debugfs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Check for rmaps allocation
  KVM: SEV: Mark nested locking of kvm->lock

Pull drm fixes from Dave Airlie:
 "There is only the amdgpu runtime pm regression fix in here:

  amdgpu:

   - suspend/resume fix

   - fix runtime PM regression"

* tag 'drm-fixes-2022-01-07' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: disable runpm if we are the primary adapter
  fbdev: fbmem: add a helper to determine if an aperture is used by a fw fb
  drm/amd/pm: keep the BACO feature enabled for suspend

With TDP MMU being the default now, access to mmu_rmaps_stat debugfs
file causes following oops:

BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 PID: 3185 Comm: cat Not tainted 5.16.0-rc4+ #204
RIP: 0010:pte_list_count+0x6/0x40
 Call Trace:
  <TASK>
  ? kvm_mmu_rmaps_stat_show+0x15e/0x320
  seq_read_iter+0x126/0x4b0
  ? aa_file_perm+0x124/0x490
  seq_read+0xf5/0x140
  full_proxy_read+0x5c/0x80
  vfs_read+0x9f/0x1a0
  ksys_read+0x67/0xe0
  __x64_sys_read+0x19/0x20
  do_syscall_64+0x3b/0xc0
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7fca6fc13912

Return early when rmaps are not present.
Reported-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220105040337.4234-1-nikunj@amd.com>
Cc: stable@vger.kernel.org
Fixes: 3bcd0662 ("KVM: X86: Introduce mmu_rmaps_stat per-vm debugfs file")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Both source and dest vms' kvm->locks are held in sev_lock_two_vms.
Mark one with a different subtype to avoid false positives from lockdep.

Fixes: c9d61dcb (KVM: SEV: accept signals in sev_lock_two_vms)
Reported-by: Yiru Xu <xyru1999@gmail.com>
Tested-by: Jinrong Liang <cloudliang@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1641364863-26331-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull rdma fixes from Jason Gunthorpe:
 "Last pull for 5.16, the reversion has been known for a while now but
  didn't get a proper fix in time. Looks like we will have several
  info-leak bugs to take care of going foward.

   - Revert the patch fixing the DM related crash causing a widespread
     regression for kernel ULPs. A proper fix just didn't appear this
     cycle due to the holidays

   - Missing NULL check on alloc in uverbs

   - Double free in rxe error paths

   - Fix a new kernel-infoleak report when forming ah_attr's without
     GRH's in ucma"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/core: Don't infoleak GRH fields
  RDMA/uverbs: Check for null return of kmalloc_array
  Revert "RDMA/mlx5: Fix releasing unallocated memory in dereg MR flow"
  RDMA/rxe: Prevent double freeing rxe_map_set()

Pull tracing fixes from Steven Rostedt:
 "Three minor tracing fixes:

   - Fix missing prototypes in sample module for direct functions

   - Fix check of valid buffer in get_trace_buf()

   - Fix annotations of percpu pointers"

* tag 'trace-v5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Tag trace_percpu_buffer as a percpu pointer
  tracing: Fix check for trace_percpu_buffer validity in get_trace_buf()
  ftrace/samples: Add missing prototypes direct functions

When a task is writing to an fd opened by a different task, the perm check
should use the cgroup namespace of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

When a task is writing to an fd opened by a different task, the perm check
should use the credentials of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

0644 is an odd perm to create a cgroup which is a directory. Use the regular
0755 instead. This is necessary for euid switching test case.
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

cgroup process migration permission checks are performed at write time as
whether a given operation is allowed or not is dependent on the content of
the write - the PID. This currently uses current's cgroup namespace which is
a potential security weakness as it may allow scenarios where a less
privileged process tricks a more privileged one into writing into a fd that
it created.

This patch makes cgroup remember the cgroup namespace at the time of open
and uses it for migration permission checks instad of current's. Note that
this only applies to cgroup2 as cgroup1 doesn't have namespace support.

This also fixes a use-after-free bug on cgroupns reported in

 https://lore.kernel.org/r/00000000000048c15c05d0083397@google.com

Note that backporting this fix also requires the preceding patch.
Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reported-by: syzbot+50f5cf33a284ce738b62@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/00000000000048c15c05d0083397@google.com
Fixes: 5136f636 ("cgroup: implement "nsdelegate" mount option")
Signed-off-by: Tejun Heo <tj@kernel.org>

of->priv is currently used by each interface file implementation to store
private information. This patch collects the current two private data usages
into struct cgroup_file_ctx which is allocated and freed by the common path.
This allows generic private data which applies to multiple files, which will
be used to in the following patch.

Note that cgroup_procs iterator is now embedded as procs.iter in the new
cgroup_file_ctx so that it doesn't need to be allocated and freed
separately.

v2: union dropped from cgroup_file_ctx and the procs iterator is embedded in
    cgroup_file_ctx as suggested by Linus.

v3: Michal pointed out that cgroup1's procs pidlist uses of->priv too.
    Converted. Didn't change to embedded allocation as cgroup1 pidlists get
    stored for caching.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>

cgroup process migration permission checks are performed at write time as
whether a given operation is allowed or not is dependent on the content of
the write - the PID. This currently uses current's credentials which is a
potential security weakness as it may allow scenarios where a less
privileged process tricks a more privileged one into writing into a fd that
it created.

This patch makes both cgroup2 and cgroup1 process migration interfaces to
use the credentials saved at the time of open (file->f_cred) instead of
current's.
Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Fixes: 187fe840 ("cgroup: require write perm on common ancestor when moving processes on the default hierarchy")
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Merge tag 'amd-drm-fixes-5.16-2021-12-31' of ssh://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.16-2021-12-31:

amdgpu:
- Suspend/resume fix
- Restore runtime pm behavior with efifb
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211231143825.11479-1-alexander.deucher@amd.com

When performing an I2C transfer where the last message was a write KASAN
would complain:

  BUG: KASAN: slab-out-of-bounds in mpc_i2c_do_action+0x154/0x630
  Read of size 2 at addr c814e310 by task swapper/2/0

  CPU: 2 PID: 0 Comm: swapper/2 Tainted: G    B             5.16.0-rc8 #1
  Call Trace:
  [e5ee9d50] [c08418e8] dump_stack_lvl+0x4c/0x6c (unreliable)
  [e5ee9d70] [c02f8a14] print_address_description.constprop.13+0x64/0x3b0
  [e5ee9da0] [c02f9030] kasan_report+0x1f0/0x204
  [e5ee9de0] [c0c76ee4] mpc_i2c_do_action+0x154/0x630
  [e5ee9e30] [c0c782c4] mpc_i2c_isr+0x164/0x240
  [e5ee9e60] [c00f3a04] __handle_irq_event_percpu+0xf4/0x3b0
  [e5ee9ec0] [c00f3d40] handle_irq_event_percpu+0x80/0x110
  [e5ee9f40] [c00f3e48] handle_irq_event+0x78/0xd0
  [e5ee9f60] [c00fcfec] handle_fasteoi_irq+0x19c/0x370
  [e5ee9fa0] [c00f1d84] generic_handle_irq+0x54/0x80
  [e5ee9fc0] [c0006b54] __do_irq+0x64/0x200
  [e5ee9ff0] [c0007958] __do_IRQ+0xe8/0x1c0
  [c812dd50] [e3eaab20] 0xe3eaab20
  [c812dd90] [c0007a4c] do_IRQ+0x1c/0x30
  [c812dda0] [c0000c04] ExternalInput+0x144/0x160
  --- interrupt: 500 at arch_cpu_idle+0x34/0x60
  NIP:  c000b684 LR: c000b684 CTR: c0019688
  REGS: c812ddb0 TRAP: 0500   Tainted: G    B              (5.16.0-rc8)
  MSR:  00029002 <CE,EE,ME>  CR: 22000488  XER: 20000000

  GPR00: c10ef7fc c812de90 c80ff200 c2394718 00000001 00000001 c10e3f90 00000003
  GPR08: 00000000 c0019688 c2394718 fc7d625b 22000484 00000000 21e17000 c208228c
  GPR16: e3e99284 00000000 ffffffff c2390000 c001bac0 c2082288 c812df60 c001ba60
  GPR24: c23949c0 00000018 00080000 00000004 c80ff200 00000002 c2348ee4 c2394718
  NIP [c000b684] arch_cpu_idle+0x34/0x60
  LR [c000b684] arch_cpu_idle+0x34/0x60
  --- interrupt: 500
  [c812de90] [c10e3f90] rcu_eqs_enter.isra.60+0xc0/0x110 (unreliable)
  [c812deb0] [c10ef7fc] default_idle_call+0xbc/0x230
  [c812dee0] [c00af0e8] do_idle+0x1c8/0x200
  [c812df10] [c00af3c0] cpu_startup_entry+0x20/0x30
  [c812df20] [c001e010] start_secondary+0x5d0/0xba0
  [c812dff0] [c00028a0] __secondary_start+0x90/0xdc

This happened because we would overrun the i2c->msgs array on the final
interrupt for the I2C STOP. This didn't happen if the last message was a
read because there is no interrupt in that case. Ensure that we only
access the current message if we are not processing a I2C STOP
condition.

Fixes: 1538d82f ("i2c: mpc: Interrupt driven transfer")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'socfpga_fix_for_v5.16_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes

SoCFPGA dts updates for v5.16, part 3
- Change the SoCFPGA compatible to "intel,socfpga-qspi"
- Update dt-bindings document to include "intel,socfpga-qspi"

* tag 'socfpga_fix_for_v5.16_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (361 commits)
  ARM: dts: socfpga: change qspi to "intel,socfpga-qspi"
  dt-bindings: spi: cadence-quadspi: document "intel,socfpga-qspi"
  Linux 5.16-rc7
  mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()
  mm/damon/dbgfs: protect targets destructions with kdamond_lock
  mm/page_alloc: fix __alloc_size attribute for alloc_pages_exact_nid
  mm: delete unsafe BUG from page_cache_add_speculative()
  mm, hwpoison: fix condition in free hugetlb page path
  MAINTAINERS: mark more list instances as moderated
  kernel/crash_core: suppress unknown crashkernel parameter warning
  mm: mempolicy: fix THP allocations escaping mempolicy restrictions
  kfence: fix memory leak when cat kfence objects
  platform/x86: intel_pmc_core: fix memleak on registration failure
  net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M
  r8152: sync ocp base
  r8152: fix the force speed doesn't work for RTL8156
  net: bridge: fix ioctl old_deviceless bridge argument
  net: stmmac: ptp: fix potentially overflowing expression
  net: dsa: tag_ocelot: use traffic class to map priority on injected header
  veth: ensure skb entering GRO are not cloned.
  ...

Link: https://lore.kernel.org/r/20211227103644.566694-1-dinguyen@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Reset controller fixes for v5.16, part 2

Fix pm_runtime_resume_and_get() error handling in the
reset-rzg2l-usbphy-ctrl driver.

* tag 'reset-fixes-for-v5.16-2' of git://git.pengutronix.de/pza/linux:
  reset: renesas: Fix Runtime PM usage
  reset: tegra-bpmp: Revert Handle errors in BPMP response

Link: https://lore.kernel.org/r/20220105172515.273947-1-p.zabel@pengutronix.deSigned-off-by: Olof Johansson <olof@lixom.net>

Tag trace_percpu_buffer as a percpu pointer to resolve warnings
reported by sparse:
  /linux/kernel/trace/trace.c:3218:46: warning: incorrect type in initializer (different address spaces)
  /linux/kernel/trace/trace.c:3218:46:    expected void const [noderef] __percpu *__vpp_verify
  /linux/kernel/trace/trace.c:3218:46:    got struct trace_buffer_struct *
  /linux/kernel/trace/trace.c:3234:9: warning: incorrect type in initializer (different address spaces)
  /linux/kernel/trace/trace.c:3234:9:    expected void const [noderef] __percpu *__vpp_verify
  /linux/kernel/trace/trace.c:3234:9:    got int *

Link: https://lkml.kernel.org/r/ebabd3f23101d89cb75671b68b6f819f5edc830b.1640255304.git.naveen.n.rao@linux.vnet.ibm.com

Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 07d777fe ("tracing: Add percpu buffers for trace_printk()")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

With the new osnoise tracer, we are seeing the below splat:
    Kernel attempted to read user page (c7d880000) - exploit attempt? (uid: 0)
    BUG: Unable to handle kernel data access on read at 0xc7d880000
    Faulting instruction address: 0xc0000000002ffa10
    Oops: Kernel access of bad area, sig: 11 [#1]
    LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
    ...
    NIP [c0000000002ffa10] __trace_array_vprintk.part.0+0x70/0x2f0
    LR [c0000000002ff9fc] __trace_array_vprintk.part.0+0x5c/0x2f0
    Call Trace:
    [c0000008bdd73b80] [c0000000001c49cc] put_prev_task_fair+0x3c/0x60 (unreliable)
    [c0000008bdd73be0] [c000000000301430] trace_array_printk_buf+0x70/0x90
    [c0000008bdd73c00] [c0000000003178b0] trace_sched_switch_callback+0x250/0x290
    [c0000008bdd73c90] [c000000000e70d60] __schedule+0x410/0x710
    [c0000008bdd73d40] [c000000000e710c0] schedule+0x60/0x130
    [c0000008bdd73d70] [c000000000030614] interrupt_exit_user_prepare_main+0x264/0x270
    [c0000008bdd73de0] [c000000000030a70] syscall_exit_prepare+0x150/0x180
    [c0000008bdd73e10] [c00000000000c174] system_call_vectored_common+0xf4/0x278

osnoise tracer on ppc64le is triggering osnoise_taint() for negative
duration in get_int_safe_duration() called from
trace_sched_switch_callback()->thread_exit().

The problem though is that the check for a valid trace_percpu_buffer is
incorrect in get_trace_buf(). The check is being done after calculating
the pointer for the current cpu, rather than on the main percpu pointer.
Fix the check to be against trace_percpu_buffer.

Link: https://lkml.kernel.org/r/a920e4272e0b0635cf20c444707cbce1b2c8973d.1640255304.git.naveen.n.rao@linux.vnet.ibm.com

Cc: stable@vger.kernel.org
Fixes: e2ace001 ("tracing: Choose static tp_printk buffer by explicit nesting count")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

There's another compilation fail (first here [1]) reported by kernel
test robot for W=1 clang build:

  >> samples/ftrace/ftrace-direct-multi-modify.c:7:6: warning: no previous
  prototype for function 'my_direct_func1' [-Wmissing-prototypes]
     void my_direct_func1(unsigned long ip)

Direct functions in ftrace direct sample modules need to have prototypes
defined. They are already global in order to be visible for the inline
assembly, so there's no problem.

The kernel test robot reported just error for ftrace-direct-multi-modify,
but I got same errors also for the rest of the modules touched by this patch.

[1] 67d4f6e3 ftrace/samples: Add missing prototype for my_direct_func

Link: https://lkml.kernel.org/r/20211219135317.212430-1-jolsa@kernel.orgReported-by: kernel test robot <lkp@intel.com>
Fixes: e1067a07 ("ftrace/samples: Add module to test multi direct modify interface")
Fixes: ae0cc3b7 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()")
Fixes: 156473a0 ("ftrace: Add another example of register_ftrace_direct() use case")
Fixes: b06457c8 ("ftrace: Add sample module that uses register_ftrace_direct()")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pull networking fixes from Jakub Kicinski"
 "Networking fixes, including fixes from bpf, and WiFi. One last pull
  request, turns out some of the recent fixes did more harm than good.

  Current release - regressions:

   - Revert "xsk: Do not sleep in poll() when need_wakeup set", made the
     problem worse

   - Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
     __fixed_phy_register", broke EPROBE_DEFER handling

   - Revert "net: usb: r8152: Add MAC pass-through support for more
     Lenovo Docks", broke setups without a Lenovo dock

  Current release - new code bugs:

   - selftests: set amt.sh executable

  Previous releases - regressions:

   - batman-adv: mcast: don't send link-local multicast to mcast routers

  Previous releases - always broken:

   - ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY

   - sctp: hold endpoint before calling cb in
     sctp_transport_lookup_process

   - mac80211: mesh: embed mesh_paths and mpp_paths into
     ieee80211_if_mesh to avoid complicated handling of sub-object
     allocation failures

   - seg6: fix traceroute in the presence of SRv6

   - tipc: fix a kernel-infoleak in __tipc_sendmsg()"

* tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
  selftests: set amt.sh executable
  Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
  sfc: The RX page_ring is optional
  iavf: Fix limit of total number of queues to active queues of VF
  i40e: Fix incorrect netdev's real number of RX/TX queues
  i40e: Fix for displaying message regarding NVM version
  i40e: fix use-after-free in i40e_sync_filters_subtask()
  i40e: Fix to not show opcode msg on unsuccessful VF MAC change
  ieee802154: atusb: fix uninit value in atusb_set_extended_addr
  mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
  mac80211: initialize variable have_higher_than_11mbit
  sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
  netrom: fix copying in user data in nr_setsockopt
  udp6: Use Segment Routing Header for dest address if present
  icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
  seg6: export get_srh() for ICMP handling
  Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
  ipv6: Do cleanup if attribute validation fails in multipath route
  ipv6: Continue processing multipath route even if gateway attribute is invalid
  net/fsl: Remove leftover definition in xgmac_mdio
  ...