The namespace disk names must be unique for the lifetime of the
subsystem. This was accomplished by using their parent subsystems'
instances which were allocated independently from the controllers
connected to that subsystem. This allowed name prefixes assigned to
namespaces to match a controller from an unrelated subsystem, and has
created confusion among users examining device nodes.

Ensure a namespace's subsystem instance never clashes with a controller
instance of another subsystem by transferring the instance ownership
to the parent subsystem from the first controller discovered in that
subsystem.
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

The variable ret is being initialized with a value that is never read
and is being re-assigned immediately afterwards. The assignment is
redundant and hence can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

nvme_sync_queues currently syncs all namespace queues, but should
also sync the admin queue, if present.
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

Current code matches subnqn and collapses all controllers to the
same subnqn to a single subsystem structure. This is good for
recognizing multiple controllers for the same subsystem. But with
the well-known discovery subnqn, the subsystems aren't truly the
same subsystem. As such, subsystem specific rules, such as no
overlap of controller id, do not apply. With today's behavior, the
check for overlap of controller id can fail, preventing the new
discovery controller from being created.

When searching for like subsystem nqn, exclude the discovery nqn
from matching. This will result in each discovery controller being
attached to a unique subsystem structure.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

If a controller reset is racing with a namespace revalidation, the
revalidation (admin) I/O will surely fail, but we should not remove the
namespace as we will execute the I/O when the controller is back up.
Same for spurious allocation errors (return -ENOMEM).

Fix this by checking the specific error code in nvme_revalidate_disk and
if it is a transient error (for example non DNR nvme statuses or
a negative ENOMEM as allocation failure), do not remove the namespace as
it will either recover when the controller is back up and schedule
a subsequent scan, or the controller is going away and the namespaces
will be removed anyways.

This fixes a hang namespace scanning racing with a controller reset and
also sporious I/O errors in path failover coditions where the
controller reset is racing with the namespace scan work with multipath
enabled.
Reported-by: Hannes Reinecke  <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

Make the callers check the return status and propagate
back accordingly (casting to errno from a positive nvme status).
Also print the return status in nvme_report_ns_ids.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

right now callers of nvme_identify_ns only know that it failed,
but don't know why. Make nvme_identify_ns propagate the error back.
Because nvme_submit_sync_cmd may return a positive status code, we
make nvme_identify_ns receive the id by reference and return that
status up the call chain, but make sure not to leak positive nvme
status codes to the upper layers.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

No need for the full blown request structure.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

NVME_SC_INTERNAL should indicate an internal controller errors
and not host transport errors. These errors will propagate to
upper layers (essentially nvme core) and be interpereted as
transport errors which should not be taken into account for
namespace state or condition.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

This is a more appropriate error status for a transport error
detected by us (the host).
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

NVME_SC_ABORT_REQ means that the request was aborted due to
an abort command received. In our case, this is a transport
cancellation, so host pathing error is much more appropriate.

Also, convert NVME_SC_HOST_PATH_ERROR to BLK_STS_TRANSPORT for
such that callers can understand that the status is a transport
related error. This will be used by the ns scanning code to
understand if it got an error from the controller or that the
controller happens to be unreachable by the transport.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

cecf5d87 ("block: split .sysfs_lock into two locks") starts to
release & actuire sysfs_lock again during switching elevator. So it
isn't enough to prevent switching elevator from happening by simply
clearing QUEUE_FLAG_REGISTERED with holding sysfs_lock, because
in-progress switch still can move on after re-acquiring the lock,
meantime the flag of QUEUE_FLAG_REGISTERED won't get checked.

Fixes this issue by checking 'q->elevator' directly & locklessly after
q->kobj is removed in blk_unregister_queue(), this way is safe because
q->elevator can't be changed at that time.

Fixes: cecf5d87 ("block: split .sysfs_lock into two locks")
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Currently blk_set_runtime_active() is checking if q->dev is null by
itself, thus remove the same checking in its user: scsi_dev_type_resume().
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Some devices may skip blk_pm_runtime_init() and have null pointer
in its request_queue->dev. For example, SCSI devices of UFS Well-Known
LUNs.

Currently the null pointer is checked by the user of
blk_set_runtime_active(), i.e., scsi_dev_type_resume(). It is better to
check it by blk_set_runtime_active() itself instead of by its users.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

A negative number of devices is nonsensical, so change the type to
unsigned. If the number of devices is 0, it is impossible for userspace
to interact with the module, so refuse loading the driver for that case.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The name of the module is "null_blk", not "null". Make `pr_info()` follow
the pattern of `pr_err()` log messages.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use proper ReST syntax for chapters. Add more information to enhance
standardization in the file and to make the rendering more homogeneous.
Add a SPDX identifier. Mark single-queue mode as deprecated.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Report debt and rename del_ms row to delay for consistency.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When outputting json:

* Don't truncate numbers.

* Report address of iocg to ease drilling down further.

When outputting table:

* Use math.ceil() for delay_ms so that small delays don't read as 0.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Json has limited accuracy for numbers and can silently truncate 64bit
values, which can be extremely confusing.  Let's consistently use
string encapsulated values for json output.

While at it, convert an unnecesary f-string to str().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merges have the same problem that forced-bios had which is fixed by
the previous patch.  The cost of a merge is calculated at the time of
issue and force-advances vtime into the future.  Until global vtime
catches up, how the cgroup's hweight changes in the meantime doesn't
matter and it often leads to situations where the cost is calculated
at one hweight and paid at a very different one.  See the previous
patch for more details.

Fix it by never advancing vtime into the future for merges.  If budget
is available, vtime is advanced.  Otherwise, the cost is charged as
debt.

This brings merge cost handling in line with issue cost handling in
ioc_rqos_throttle().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Currently, when a bio needs to be force-charged and there isn't enough
budget, vtime is simply pushed into the future.  This means that the
cost of the whole bio is scaled using the current hweight and then
charged immediately.  Until the global vtime advances beyond this
future vtime, the cgroup won't be allowed to issue normal IOs.

This is incorrect and can lead to, for example, exploding vrate or
extended stalls if vrate range is constrained.  Consider the following
scenario.

1. A cgroup with a very low hweight runs out of budget.

2. A storm of swap-out happens on it.  All of them are scaled
   according to the current low hweight and charged to vtime pushing
   it to a far future.

3. All other cgroups go idle and now the above cgroup has access to
   the whole device.  However, because vtime is already wound using
   the past low hweight, what its current hweight is doesn't matter
   until global vtime catches up to the local vtime.

4. As a result, either vrate gets ramped up extremely or the IOs stall
   while the underlying device is idle.

This is because the hweight the overage is calculated at is different
from the hweight that it's being paid at.

Fix it by remembering the overage in absoulte vtime and continuously
paying with the actual budget according to the current hweight at each
period.

Note that non-forced bios which wait already remembers the cost in
absolute vtime.  This brings forced-bio accounting in line.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ioc_pd_free() first cancels the hrtimers and then deactivates the
iocg.  However, the iocg timer can run inbetween and reschedule the
hrtimers which will end up running after the iocg is freed leading to
crashes like the following.

  general protection fault: 0000 [#1] SMP
  ...
  RIP: 0010:iocg_kick_delay+0xbe/0x1b0
  RSP: 0018:ffffc90003598ea0 EFLAGS: 00010046
  RAX: 1cee00fd69512b54 RBX: ffff8881bba48400 RCX: 00000000000003e8
  RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881bba48400
  RBP: 0000000000004e20 R08: 0000000000000002 R09: 00000000000003e8
  R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90003598ef0
  R13: 00979f3810ad461f R14: ffff8881bba4b400 R15: 25439f950d26e1d1
  FS:  0000000000000000(0000) GS:ffff88885f800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f64328c7e40 CR3: 0000000002409005 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   <IRQ>
   iocg_delay_timer_fn+0x3d/0x60
   __hrtimer_run_queues+0xfe/0x270
   hrtimer_interrupt+0xf4/0x210
   smp_apic_timer_interrupt+0x5e/0x120
   apic_timer_interrupt+0xf/0x20
   </IRQ>

Fix it by canceling hrtimers after deactivating the iocg.

Fixes: 7caa4715 ("blkcg: implement blk-iocost")
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This adds to BFQ the missing per-device weight interfaces:
blkio.bfq.weight_device on legacy and io.bfq.weight on unified. The
implementation pretty closely resembles what we had in CFQ and the parsing code
is basically reused.

Tests
=====

Using two cgroups and three block devices, having weights setup as:

Cgroup          test1           test2
============================================
default         100             500
sda             500             100
sdb             default         default
sdc             200             200

cgroup v1 runs
--------------

    sda.test1.out:   READ: bw=913MiB/s
    sda.test2.out:   READ: bw=183MiB/s

    sdb.test1.out:   READ: bw=213MiB/s
    sdb.test2.out:   READ: bw=1054MiB/s

    sdc.test1.out:   READ: bw=650MiB/s
    sdc.test2.out:   READ: bw=650MiB/s

cgroup v2 runs
--------------

    sda.test1.out:   READ: bw=915MiB/s
    sda.test2.out:   READ: bw=184MiB/s

    sdb.test1.out:   READ: bw=216MiB/s
    sdb.test2.out:   READ: bw=1069MiB/s

    sdc.test1.out:   READ: bw=621MiB/s
    sdc.test2.out:   READ: bw=622MiB/s
Signed-off-by: Fam Zheng <zhengfeiran@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This function will be useful when we update weight from the soon-coming
per-device interface.
Signed-off-by: Fam Zheng <zhengfeiran@bytedance.com>
Reviewed-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The comment of bfq_group_set_weight says the reading of prio_changed
should happen before the reading of weight, but a memory barrier is
missing here. Add it now, to match the smp_wmb() there.
Signed-off-by: Fam Zheng <zhengfeiran@bytedance.com>
Reviewed-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The lookup logic is broken - 'e' will never be NULL, even if the
list is empty. Maintain lookup hit in a separate variable instead.

Fixes: a0958ba7 ("block: Improve default elevator selection")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Using the helper blk_queue_required_elevator_features(), set the
elevator feature ELEVATOR_F_ZBD_SEQ_WRITE as required for the request
queue of SCSI ZBC disks.

This feature requirement can always be satisfied as the mq-deadline
elevator is always selected for in-kernel compilation when
CONFIG_BLK_DEV_ZONED (zoned block device support) is enabled.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Using the helper blk_queue_required_elevator_features(), set the
elevator feature ELEVATOR_F_ZBD_SEQ_WRITE as required for the request
queue of null_blk devices created with zoned mode enabled.

This feature requirement can always be satisfied as the mq-deadline
elevator is always selected for in-kernel compilation when
CONFIG_BLK_DEV_ZONED (zoned block device support) is enabled.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When elevator_init_mq() is called from blk_mq_init_allocated_queue(),
the only information known about the device is the number of hardware
queues as the block device scan by the device driver is not completed
yet for most drivers. The device type and elevator required features
are not set yet, preventing to correctly select the default elevator
most suitable for the device.

This currently affects all multi-queue zoned block devices which default
to the "none" elevator instead of the required "mq-deadline" elevator.
These drives currently include host-managed SMR disks connected to a
smartpqi HBA and null_blk block devices with zoned mode enabled.
Upcoming NVMe Zoned Namespace devices will also be affected.

Fix this by adding the boolean elevator_init argument to
blk_mq_init_allocated_queue() to control the execution of
elevator_init_mq(). Two cases exist:
1) elevator_init = false is used for calls to
   blk_mq_init_allocated_queue() within blk_mq_init_queue(). In this
   case, a call to elevator_init_mq() is added to __device_add_disk(),
   resulting in the delayed initialization of the queue elevator
   after the device driver finished probing the device information. This
   effectively allows elevator_init_mq() access to more information
   about the device.
2) elevator_init = true preserves the current behavior of initializing
   the elevator directly from blk_mq_init_allocated_queue(). This case
   is used for the special request based DM devices where the device
   gendisk is created before the queue initialization and device
   information (e.g. queue limits) is already known when the queue
   initialization is executed.

Additionally, to make sure that the elevator initialization is never
done while requests are in-flight (there should be none when the device
driver calls device_add_disk()), freeze and quiesce the device request
queue before calling blk_mq_init_sched() in elevator_init_mq().
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For block devices that do not specify required features, preserve the
current default elevator selection (mq-deadline for single queue
devices, none for multi-queue devices). However, for devices specifying
required features (e.g. zoned block devices ELEVATOR_F_ZBD_SEQ_WRITE
feature), select the first available elevator providing the required
features.

In all cases, default to "none" if no elevator is available or if the
initialization of the default elevator fails.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Introduce the definition of elevator features through the
elevator_features flags in the elevator_type structure. Each flag can
represent a feature supported by an elevator. The first feature defined
by this patch is support for zoned block device sequential write
constraint with the flag ELEVATOR_F_ZBD_SEQ_WRITE, which is implemented
by the mq-deadline elevator using zone write locking.

Other possible features are IO priorities, write hints, latency targets
or single-LUN dual-actuator disks (for which the elevator could maintain
one LBA ordered list per actuator).

The required_elevator_features field is also added to the request_queue
structure to allow a device driver to specify elevator feature flags
that an elevator must support for the correct operation of the device
(e.g. device drivers for zoned block devices can have the
ELEVATOR_F_ZBD_SEQ_WRITE flag as a required feature).
The helper function blk_queue_required_elevator_features() is
defined for setting this new field.

With these two new fields in place, the elevator functions
elevator_match() and elevator_find() are modified to allow a user to set
only an elevator with a set of features that satisfies the device
required features. Elevators not matching the device requirements are
not shown in the device sysfs queue/scheduler file to prevent their use.

The "none" elevator can always be selected as before.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If the default elevator chosen is mq-deadline, elevator_init_mq() may
return an error if mq-deadline initialization fails, leading to
blk_mq_init_allocated_queue() returning an error, which in turn will
cause the block device initialization to fail and the device not being
exposed.

Instead of taking such extreme measure, handle mq-deadline
initialization failures in the same manner as when mq-deadline is not
available (no module to load), that is, default to the "none" scheduler.
With this change, elevator_init_mq() return type can be changed to void.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Instead of checking a queue tag_set BLK_MQ_F_NO_SCHED flag before
calling elevator_init_mq() to make sure that the queue supports IO
scheduling, use the elevator.c function elv_support_iosched() in
elevator_init_mq(). This does not introduce any functional change but
ensure that elevator_init_mq() does the right thing based on the queue
settings.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If userspace requests target to be removed, nvm_remove_tgt() will
iterate the nvm_devices to find out the given target, but if not
found, then it should print out an error.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Updated output string and patch description.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

all the pr_() family can have this prefix by pr_fmt.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If alloc_disk fails in pcd_init_units, cd->disk & pi are empty, we need
to check if cd->disk is null in pcd_detect.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In pcd_init_units, if blk_mq_init_sq_queue fails, need to set queue to
NULL before put_disk, otherwise null-ptr-deref Read will occur.

put_disk
  kobject_put
    disk_release
      blk_put_queue(disk->queue)

Fixes: f0d17625 ("paride/pcd: Fix potential NULL pointer dereference and mem leak")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In pf_init_units, if blk_mq_init_sq_queue fails, need to set queue to
NULL before put_disk, otherwise null-ptr-deref Read will occur.

put_disk
  kobject_put
    disk_release
      blk_put_queue(disk->queue)

Fixes: 77218ddf ("paride: convert pf to blk-mq")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull MD fixes from Song.

* 'md-next' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md/raid5: use bio_end_sector to calculate last_sector
  md/raid1: fail run raid1 array when active disk less than one
  md raid0/linear: Mark array as 'broken' and fail BIOs if a member is gone