- 27 Dec, 2022 2 commits
-
-
Sean Christopherson authored
Delete an unused struct definition in x86_64/vmx_tsc_adjust_test.c. Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20221213001653.3852042-3-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Define a literal '0' asm input constraint to aarch64/page_fault_test's guest_cas() as an unsigned long to make clang happy. tools/testing/selftests/kvm/aarch64/page_fault_test.c:120:16: error: value size does not match register size specified by the constraint and modifier [-Werror,-Wasm-operand-widths] :: "r" (0), "r" (TEST_DATA), "r" (guest_test_memory)); ^ tools/testing/selftests/kvm/aarch64/page_fault_test.c:119:15: note: use constraint modifier "w" "casal %0, %1, [%2]\n" ^~ %w0 Fixes: 35c58101 ("KVM: selftests: aarch64: Add aarch64/page_fault_test") Cc: Ricardo Koller <ricarkol@google.com> Signed-off-by:Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221213001653.3852042-2-seanjc@google.com> Signed-off-by:
-
- 23 Dec, 2022 13 commits
-
-
Sean Christopherson authored
Don't install a leaf TDP MMU SPTE if the parent page's level doesn't match the target level of the fault, and instead have the vCPU retry the faulting instruction after warning. Continuing on is completely unnecessary as the absolute worst case scenario of retrying is DoSing the vCPU, whereas continuing on all but guarantees bigger explosions, e.g. ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu/tdp_mmu.c:559! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #64 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__handle_changed_spte.cold+0x95/0x9c RSP: 0018:ffffc9000072faf8 EFLAGS: 00010246 RAX: 00000000000000c1 RBX: ffffc90000731000 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8 RBP: 0600000112400bf3 R08: ffff888277c5b4c0 R09: ffffc9000072f9a0 R10: 0000000000000001 R11: 0000000000000001 R12: 06000001126009f3 R13: 0000000000000002 R14: 0000000012600901 R15: 0000000012400b01 FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_mmu_map+0x3b0/0x510 kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> Modules linked in: kvm_intel ---[ end trace 0000000000000000 ]--- Signed-off-by:
-
Sean Christopherson authored
Re-check sp->nx_huge_page_disallowed under the tdp_mmu_pages_lock spinlock when adding a new shadow page in the TDP MMU. To ensure the NX reclaim kthread can't see a not-yet-linked shadow page, the page fault path links the new page table prior to adding the page to possible_nx_huge_pages. If the page is zapped by different task, e.g. because dirty logging is disabled, between linking the page and adding it to the list, KVM can end up triggering use-after-free by adding the zapped SP to the aforementioned list, as the zapped SP's memory is scheduled for removal via RCU callback. The bug is detected by the sanity checks guarded by CONFIG_DEBUG_LIST=y, i.e. the below splat is just one possible signature. ------------[ cut here ]------------ list_add corruption. prev->next should be next (ffffc9000071fa70), but was ffff88811125ee38. (prev=ffff88811125ee38). WARNING: CPU: 1 PID: 953 at lib/list_debug.c:30 __list_add_valid+0x79/0xa0 Modules linked in: kvm_intel CPU: 1 PID: 953 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #71 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__list_add_valid+0x79/0xa0 RSP: 0018:ffffc900006efb68 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888116cae8a0 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 0000000100001872 RDI: ffff888277c5b4c8 RBP: ffffc90000717000 R08: ffff888277c5b4c0 R09: ffffc900006efa08 R10: 0000000000199998 R11: 0000000000199a20 R12: ffff888116cae930 R13: ffff88811125ee38 R14: ffffc9000071fa70 R15: ffff88810b794f90 FS: 00007fc0415d2740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000115201006 CR4: 0000000000172ea0 Call Trace: <TASK> track_possible_nx_huge_page+0x53/0x80 kvm_tdp_mmu_map+0x242/0x2c0 kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> ---[ end trace 0000000000000000 ]--- Fixes: 61f94478 ("KVM: x86/mmu: Set disallowed_nx_huge_page in TDP MMU before setting SPTE") Reported-by:
Greg Thelen <gthelen@google.com> Analyzed-by:
David Matlack <dmatlack@google.com> Cc: David Matlack <dmatlack@google.com> Cc: Ben Gardon <bgardon@google.com> Cc: Mingwei Zhang <mizhang@google.com> Signed-off-by:
-
Sean Christopherson authored
Map the leaf SPTE when handling a TDP MMU page fault if and only if the target level is reached. A recent commit reworked the retry logic and incorrectly assumed that walking SPTEs would never "fail", as the loop either bails (retries) or installs parent SPs. However, the iterator itself will bail early if it detects a frozen (REMOVED) SPTE when stepping down. The TDP iterator also rereads the current SPTE before stepping down specifically to avoid walking into a part of the tree that is being removed, which means it's possible to terminate the loop without the guts of the loop observing the frozen SPTE, e.g. if a different task zaps a parent SPTE between the initial read and try_step_down()'s refresh. Mapping a leaf SPTE at the wrong level results in all kinds of badness as page table walkers interpret the SPTE as a page table, not a leaf, and walk into the weeds. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1025 at arch/x86/kvm/mmu/tdp_mmu.c:1070 kvm_tdp_mmu_map+0x481/0x510 Modules linked in: kvm_intel CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #64 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_tdp_mmu_map+0x481/0x510 RSP: 0018:ffffc9000072fba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffffc9000072fcc0 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8 RBP: ffff888107d45a10 R08: ffff888277c5b4c0 R09: ffffc9000072fa48 R10: 0000000000000001 R11: 0000000000000001 R12: ffffc9000073a0e0 R13: ffff88810fc54800 R14: ffff888107d1ae60 R15: ffff88810fc54f90 FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> ---[ end trace 0000000000000000 ]--- Invalid SPTE change: cannot replace a present leaf SPTE with another present leaf SPTE mapping a different PFN! as_id: 0 gfn: 100200 old_spte: 600000112400bf3 new_spte: 6000001126009f3 level: 2 ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu/tdp_mmu.c:559! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #64 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__handle_changed_spte.cold+0x95/0x9c RSP: 0018:ffffc9000072faf8 EFLAGS: 00010246 RAX: 00000000000000c1 RBX: ffffc90000731000 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8 RBP: 0600000112400bf3 R08: ffff888277c5b4c0 R09: ffffc9000072f9a0 R10: 0000000000000001 R11: 0000000000000001 R12: 06000001126009f3 R13: 0000000000000002 R14: 0000000012600901 R15: 0000000012400b01 FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_mmu_map+0x3b0/0x510 kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> Modules linked in: kvm_intel ---[ end trace 0000000000000000 ]--- Fixes: 63d28a25 ("KVM: x86/mmu: simplify kvm_tdp_mmu_map flow when guest has to retry") Cc: Robert Hoo <robert.hu@linux.intel.com> Signed-off-by:
-
Sean Christopherson authored
Hoist the is_removed_spte() check above the "level == goal_level" check when walking SPTEs during a TDP MMU page fault to avoid attempting to map a leaf entry if said entry is frozen by a different task/vCPU. ------------[ cut here ]------------ WARNING: CPU: 3 PID: 939 at arch/x86/kvm/mmu/tdp_mmu.c:653 kvm_tdp_mmu_map+0x269/0x4b0 Modules linked in: kvm_intel CPU: 3 PID: 939 Comm: nx_huge_pages_t Not tainted 6.1.0-rc4+ #67 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_tdp_mmu_map+0x269/0x4b0 RSP: 0018:ffffc9000068fba8 EFLAGS: 00010246 RAX: 00000000000005a0 RBX: ffffc9000068fcc0 RCX: 0000000000000005 RDX: ffff88810741f000 RSI: ffff888107f04600 RDI: ffffc900006a3000 RBP: 060000010b000bf3 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 000ffffffffff000 R12: 0000000000000005 R13: ffff888113670000 R14: ffff888107464958 R15: 0000000000000000 FS: 00007f01c942c740(0000) GS:ffff888277cc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000117013006 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> ---[ end trace 0000000000000000 ]--- Fixes: 63d28a25 ("KVM: x86/mmu: simplify kvm_tdp_mmu_map flow when guest has to retry") Cc: Robert Hoo <robert.hu@linux.intel.com> Signed-off-by:
Robert Hoo <robert.hu@linux.intel.com> Message-Id: <20221213033030.83345-2-seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
When stuffing the allowed secondary execution controls for nested VMX in response to CPUID updates, don't set the allowed-1 bit for a feature that isn't supported by KVM, i.e. isn't allowed by the canonical vmcs_config. WARN if KVM attempts to manipulate a feature that isn't supported. All features that are currently stuffed are always advertised to L1 for nested VMX if they are supported in KVM's base configuration, and no additional features should ever be added to the CPUID-induced stuffing (updating VMX MSRs in response to CPUID updates is a long-standing KVM flaw that is slowly being fixed). Signed-off-by:
-
Sean Christopherson authored
Set ENABLE_USR_WAIT_PAUSE in KVM's supported VMX MSR configuration if the feature is supported in hardware and enabled in KVM's base, non-nested configuration, i.e. expose ENABLE_USR_WAIT_PAUSE to L1 if it's supported. This fixes a bug where saving/restoring, i.e. migrating, a vCPU will fail if WAITPKG (the associated CPUID feature) is enabled for the vCPU, and obviously allows L1 to enable the feature for L2. KVM already effectively exposes ENABLE_USR_WAIT_PAUSE to L1 by stuffing the allowed-1 control ina vCPU's virtual MSR_IA32_VMX_PROCBASED_CTLS2 when updating secondary controls in response to KVM_SET_CPUID(2), but (a) that depends on flawed code (KVM shouldn't touch VMX MSRs in response to CPUID updates) and (b) runs afoul of vmx_restore_control_msr()'s restriction that the guest value must be a strict subset of the supported host value. Although no past commit explicitly enabled nested support for WAITPKG, doing so is safe and functionally correct from an architectural perspective as no additional KVM support is needed to virtualize TPAUSE, UMONITOR, and UMWAIT for L2 relative to L1, and KVM already forwards VM-Exits to L1 as necessary (commit bf653b78, "KVM: vmx: Introduce handle_unexpected_vmexit and handle WAITPKG vmexit"). Note, KVM always keeps the hosts MSR_IA32_UMWAIT_CONTROL resident in hardware, i.e. always runs both L1 and L2 with the host's power management settings for TPAUSE and UMWAIT. See commit bf09fb6c ("KVM: VMX: Stop context switching MSR_IA32_UMWAIT_CONTROL") for more details. Fixes: e69e72fa ("KVM: x86: Add support for user wait instructions") Cc: stable@vger.kernel.org Reported-by:
Aaron Lewis <aaronlewis@google.com> Reported-by:
Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Message-Id: <20221213062306.667649-2-seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
Explicitly drop the result of kvm_vcpu_write_guest() when writing the "launch state" as part of VMCLEAR emulation, and add a comment to call out that KVM's behavior is architecturally valid. Intel's pseudocode effectively says that VMCLEAR is a nop if the target VMCS address isn't in memory, e.g. if the address points at MMIO. Add a FIXME to call out that suppressing failures on __copy_to_user() is wrong, as memory (a memslot) does exist in that case. Punt the issue to the future as open coding kvm_vcpu_write_guest() just to make sure the guest dies with -EFAULT isn't worth the extra complexity. The flaw will need to be addressed if KVM ever does something intelligent on uaccess failures, e.g. to support post-copy demand paging, but in that case KVM will need a more thorough overhaul, i.e. VMCLEAR shouldn't need to open code a core KVM helper. No functional change intended. Reported-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527765 ("Error handling issues") Fixes: 587d7e72 ("kvm: nVMX: VMCLEAR should not cause the vCPU to shut down") Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
-
Sean Christopherson authored
Zero out the valid_bank_mask when using the fast variant of HVCALL_SEND_IPI_EX to send IPIs to all vCPUs. KVM requires the "var_cnt" and "valid_bank_mask" inputs to be consistent even when targeting all vCPUs. See commit bd1ba573 ("KVM: x86: Get the number of Hyper-V sparse banks from the VARHEAD field"). Fixes: 99848924 ("KVM: selftests: Hyper-V PV IPI selftest") Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Add a sanity check in kvm_handle_memory_failure() to assert that a valid x86_exception structure is provided if the memory "failure" wants to propagate a fault into the guest. If a memory failure happens during a direct guest physical memory access, e.g. for nested VMX, KVM hardcodes the failure to X86EMUL_IO_NEEDED and doesn't provide an exception pointer (because the exception struct would just be filled with garbage). Signed-off-by:
-
Peng Hao authored
kvm_apic_hw_enabled() only needs to return bool, there is no place to use the return value of MSR_IA32_APICBASE_ENABLE. Signed-off-by:
Peng Hao <flyingpeng@tencent.com> Message-Id: <CAPm50aJ=BLXNWT11+j36Dd6d7nz2JmOBk4u7o_NPQ0N61ODu1g@mail.gmail.com> Signed-off-by:
-
Vitaly Kuznetsov authored
In kvm_hv_flush_tlb(), 'data_offset' and 'consumed_xmm_halves' variables are used in a mutually exclusive way: in 'hc->fast' we count in 'XMM halves' and increase 'data_offset' otherwise. Coverity discovered, that in one case both variables are incremented unconditionally. This doesn't seem to cause any issues as the only user of 'data_offset'/'consumed_xmm_halves' data is kvm_hv_get_tlb_flush_entries() -> kvm_hv_get_hc_data() which also takes into account 'hc->fast' but is still worth fixing. To make things explicit, put 'data_offset' and 'consumed_xmm_halves' to 'struct kvm_hv_hcall' as a union and use at call sites. This allows to remove explicit 'data_offset'/'consumed_xmm_halves' parameters from kvm_hv_get_hc_data()/kvm_get_sparse_vp_set()/kvm_hv_get_tlb_flush_entries() helpers. Note: 'struct kvm_hv_hcall' is allocated on stack in kvm_hv_hypercall() and is not zeroed, consumers are supposed to initialize the appropriate field if needed. Reported-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
-
Adamos Ttofari authored
When scanning userspace I/OAPIC entries, intercept EOI for level-triggered IRQs if the current vCPU has a pending and/or in-service IRQ for the vector in its local API, even if the vCPU doesn't match the new entry's destination. This fixes a race between userspace I/OAPIC reconfiguration and IRQ delivery that results in the vector's bit being left set in the remote IRR due to the eventual EOI not being forwarded to the userspace I/OAPIC. Commit 0fc5a36d ("KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race") fixed the in-kernel IOAPIC, but not the userspace IOAPIC configuration, which has a similar race. Fixes: 0fc5a36d ("KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race") Signed-off-by:
Adamos Ttofari <attofari@amazon.de> Reviewed-by:
-
Like Xu authored
The current vPMU can reuse the same pmc->perf_event for the same hardware event via pmc_pause/resume_counter(), but this optimization does not apply to a portion of the TSX events (e.g., "event=0x3c,in_tx=1, in_tx_cp=1"), where event->attr.sample_period is legally zero at creation, thus making the perf call to perf_event_period() meaningless (no need to adjust sample period in this case), and instead causing such reusable perf_events to be repeatedly released and created. Avoid releasing zero sample_period events by checking is_sampling_event() to follow the previously enable/disable optimization. Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20221207071506.15733-2-likexu@tencent.com> Signed-off-by:
-
- 14 Dec, 2022 1 commit
-
-
Sean Christopherson authored
Add ReST formatting to the set of userspace MSR exits/flags so that the resulting HTML docs generate a table instead of malformed gunk. This also fixes a warning that was introduced by a recent cleanup of the relevant documentation (yay copy+paste). >> Documentation/virt/kvm/api.rst:7287: WARNING: Block quote ends without a blank line; unexpected unindent. Fixes: 1ae09954 ("KVM: x86: Allow deflecting unknown MSR accesses to user space") Fixes: 1f158147 ("KVM: x86: Clean up KVM_CAP_X86_USER_SPACE_MSR documentation") Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
-
- 12 Dec, 2022 1 commit
-
-
Paolo Bonzini authored
x86 Xen-for-KVM: * Allow the Xen runstate information to cross a page boundary * Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured * add support for 32-bit guests in SCHEDOP_poll x86 fixes: * One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0). * Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few years back when eliminating unnecessary barriers when switching between vmcs01 and vmcs02. * Clean up the MSR filter docs. * Clean up vmread_error_trampoline() to make it more obvious that params must be passed on the stack, even for x86-64. * Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective of the current guest CPUID. * Fudge around a race with TSC refinement that results in KVM incorrectly thinking a guest needs TSC scaling when running on a CPU with a constant TSC, but no hardware-enumerated TSC frequency. * Advertise (on AMD) that the SMM_CTL MSR is not supported * Remove unnecessary exports Selftests: * Fix an inverted check in the access tracking perf test, and restore support for asserting that there aren't too many idle pages when running on bare metal. * Fix an ordering issue in the AMX test introduced by recent conversions to use kvm_cpu_has(), and harden the code to guard against similar bugs in the future. Anything that tiggers caching of KVM's supported CPUID, kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if the caching occurs before the test opts in via prctl(). * Fix build errors that occur in certain setups (unsure exactly what is unique about the problematic setup) due to glibc overriding static_assert() to a variant that requires a custom message. * Introduce actual atomics for clear/set_bit() in selftests Documentation: * Remove deleted ioctls from documentation * Various fixes
-
- 09 Dec, 2022 3 commits
-
-
Oliver Upton authored
MEM_REGION_TEST_DATA is meant to hold data explicitly used by a selftest, not implicit allocations due to the selftests infrastructure. Allocate the ucall pool from MEM_REGION_DATA much like the rest of the selftests library allocations. Fixes: 426729b2 ("KVM: selftests: Add ucall pool based implementation") Signed-off-by:
Oliver Upton <oliver.upton@linux.dev> Message-Id: <20221207214809.489070-5-oliver.upton@linux.dev> Signed-off-by:
-
Oliver Upton authored
An interesting feature of the Arm architecture is that the stage-1 MMU supports two distinct VA regions, controlled by TTBR{0,1}_EL1. As KVM selftests on arm64 only uses TTBR0_EL1, the VA space is constrained to [0, 2^(va_bits-1)). This is different from other architectures that allow for addressing low and high regions of the VA space from a single page table. KVM selftests' VA space allocator presumes the valid address range is split between low and high memory based the MSB, which of course is a poor match for arm64's TTBR0 region. Allow architectures to override the default VA space layout. Make use of the override to align vpages_valid with the behavior of TTBR0 on arm64. Signed-off-by: -
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarmPaolo Bonzini authored
KVM/arm64 updates for 6.2 - Enable the per-vcpu dirty-ring tracking mechanism, together with an option to keep the good old dirty log around for pages that are dirtied by something other than a vcpu. - Switch to the relaxed parallel fault handling, using RCU to delay page table reclaim and giving better performance under load. - Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option, which multi-process VMMs such as crosvm rely on. - Merge the pKVM shadow vcpu state tracking that allows the hypervisor to have its own view of a vcpu, keeping that state private. - Add support for the PMUv3p5 architecture revision, bringing support for 64bit counters on systems that support it, and fix the no-quite-compliant CHAIN-ed counter support for the machines that actually exist out there. - Fix a handful of minor issues around 52bit VA/PA support (64kB pages only) as a prefix of the oncoming support for 4kB and 16kB pages. - Add/Enable/Fix a bunch of selftests covering memslots, breakpoints, stage-2 faults and access tracking. You name it, we got it, we probably broke it. - Pick a small set of documentation and spelling fixes, because no good merge window would be complete without those. As a side effect, this tag also drags: - The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring series - A shared branch with the arm64 tree that repaints all the system registers to match the ARM ARM's naming, and resulting in interesting conflicts
-
- 05 Dec, 2022 14 commits
-
-
Marc Zyngier authored
Merge arm64's sysreg repainting branch to avoid too many ugly conflicts... Signed-off-by:Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
* kvm-arm64/misc-6.2: : . : Misc fixes for 6.2: : : - Fix formatting for the pvtime documentation : : - Fix a comment in the VHE-specific Makefile : . KVM: arm64: Fix typo in comment KVM: arm64: Fix pvtime documentation Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/pmu-unchained: : . : PMUv3 fixes and improvements: : : - Make the CHAIN event handling strictly follow the architecture : : - Add support for PMUv3p5 (64bit counters all the way) : : - Various fixes and cleanups : . KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow KVM: arm64: PMU: Sanitise PMCR_EL0.LP on first vcpu run KVM: arm64: PMU: Simplify PMCR_EL0 reset handling KVM: arm64: PMU: Replace version number '0' with ID_AA64DFR0_EL1_PMUVer_NI KVM: arm64: PMU: Make kvm_pmc the main data structure KVM: arm64: PMU: Simplify vcpu computation on perf overflow notification KVM: arm64: PMU: Allow PMUv3p5 to be exposed to the guest KVM: arm64: PMU: Implement PMUv3p5 long counter support KVM: arm64: PMU: Allow ID_DFR0_EL1.PerfMon to be set from userspace KVM: arm64: PMU: Allow ID_AA64DFR0_EL1.PMUver to be set from userspace KVM: arm64: PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation KVM: arm64: PMU: Do not let AArch32 change the counters' top 32 bits KVM: arm64: PMU: Simplify setting a counter to a specific value KVM: arm64: PMU: Add counter_index_to_*reg() helpers KVM: arm64: PMU: Only narrow counters that are not 64bit wide KVM: arm64: PMU: Narrow the overflow checking when required KVM: arm64: PMU: Distinguish between 64bit counter and 64bit overflow KVM: arm64: PMU: Always advertise the CHAIN event KVM: arm64: PMU: Align chained counter implementation with architecture pseudocode arm64: Add ID_DFR0_EL1.PerfMon values for PMUv3p7 and IMP_DEF Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/mte-map-shared: : . : Update the MTE support to allow the VMM to use shared mappings : to back the memslots exposed to MTE-enabled guests. : : Patches courtesy of Catalin Marinas and Peter Collingbourne. : . : Fix a number of issues with MTE, such as races on the tags : being initialised vs the PG_mte_tagged flag as well as the : lack of support for VM_SHARED when KVM is involved. : : Patches from Catalin Marinas and Peter Collingbourne. : . Documentation: document the ABI changes for KVM_CAP_ARM_MTE KVM: arm64: permit all VM_MTE_ALLOWED mappings with MTE enabled KVM: arm64: unify the tests for VMAs in memslots when MTE is enabled arm64: mte: Lock a page for MTE tag initialisation mm: Add PG_arch_3 page flag KVM: arm64: Simplify the sanitise_mte_tags() logic arm64: mte: Fix/clarify the PG_mte_tagged semantics mm: Do not enable PG_arch_2 for all 64-bit architectures Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/pkvm-vcpu-state: (25 commits) : . : Large drop of pKVM patches from Will Deacon and co, adding : a private vm/vcpu state at EL2, managed independently from : the EL1 state. From the cover letter: : : "This is version six of the pKVM EL2 state series, extending the pKVM : hypervisor code so that it can dynamically instantiate and manage VM : data structures without the host being able to access them directly. : These structures consist of a hyp VM, a set of hyp vCPUs and the stage-2 : page-table for the MMU. The pages used to hold the hypervisor structures : are returned to the host when the VM is destroyed." : . KVM: arm64: Use the pKVM hyp vCPU structure in handle___kvm_vcpu_run() KVM: arm64: Don't unnecessarily map host kernel sections at EL2 KVM: arm64: Explicitly map 'kvm_vgic_global_state' at EL2 KVM: arm64: Maintain a copy of 'kvm_arm_vmid_bits' at EL2 KVM: arm64: Unmap 'kvm_arm_hyp_percpu_base' from the host KVM: arm64: Return guest memory from EL2 via dedicated teardown memcache KVM: arm64: Instantiate guest stage-2 page-tables at EL2 KVM: arm64: Consolidate stage-2 initialisation into a single function KVM: arm64: Add generic hyp_memcache helpers KVM: arm64: Provide I-cache invalidation by virtual address at EL2 KVM: arm64: Initialise hypervisor copies of host symbols unconditionally KVM: arm64: Add per-cpu fixmap infrastructure at EL2 KVM: arm64: Instantiate pKVM hypervisor VM and vCPU structures from EL1 KVM: arm64: Add infrastructure to create and track pKVM instances at EL2 KVM: arm64: Rename 'host_kvm' to 'host_mmu' KVM: arm64: Add hyp_spinlock_t static initializer KVM: arm64: Include asm/kvm_mmu.h in nvhe/mem_protect.h KVM: arm64: Add helpers to pin memory shared with the hypervisor at EL2 KVM: arm64: Prevent the donation of no-map pages KVM: arm64: Implement do_donate() helper for donating memory ... Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/parallel-faults: : . : Parallel stage-2 fault handling, courtesy of Oliver Upton. : From the cover letter: : : "Presently KVM only takes a read lock for stage 2 faults if it believes : the fault can be fixed by relaxing permissions on a PTE (write unprotect : for dirty logging). Otherwise, stage 2 faults grab the write lock, which : predictably can pile up all the vCPUs in a sufficiently large VM. : : Like the TDP MMU for x86, this series loosens the locking around : manipulations of the stage 2 page tables to allow parallel faults. RCU : and atomics are exploited to safely build/destroy the stage 2 page : tables in light of multiple software observers." : . KVM: arm64: Reject shared table walks in the hyp code KVM: arm64: Don't acquire RCU read lock for exclusive table walks KVM: arm64: Take a pointer to walker data in kvm_dereference_pteref() KVM: arm64: Handle stage-2 faults in parallel KVM: arm64: Make table->block changes parallel-aware KVM: arm64: Make leaf->leaf PTE changes parallel-aware KVM: arm64: Make block->table PTE changes parallel-aware KVM: arm64: Split init and set for table PTE KVM: arm64: Atomically update stage 2 leaf attributes in parallel walks KVM: arm64: Protect stage-2 traversal with RCU KVM: arm64: Tear down unlinked stage-2 subtree after break-before-make KVM: arm64: Use an opaque type for pteps KVM: arm64: Add a helper to tear down unlinked stage-2 subtrees KVM: arm64: Don't pass kvm_pgtable through kvm_pgtable_walk_data KVM: arm64: Pass mm_ops through the visitor context KVM: arm64: Stash observed pte value in visitor context KVM: arm64: Combine visitor arguments into a context structure Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/dirty-ring: : . : Add support for the "per-vcpu dirty-ring tracking with a bitmap : and sprinkles on top", courtesy of Gavin Shan. : : This branch drags the kvmarm-fixes-6.1-3 tag which was already : merged in 6.1-rc4 so that the branch is in a working state. : . KVM: Push dirty information unconditionally to backup bitmap KVM: selftests: Automate choosing dirty ring size in dirty_log_test KVM: selftests: Clear dirty ring states between two modes in dirty_log_test KVM: selftests: Use host page size to map ring buffer in dirty_log_test KVM: arm64: Enable ring-based dirty memory tracking KVM: Support dirty ring in conjunction with bitmap KVM: Move declaration of kvm_cpu_dirty_log_size() to kvm_dirty_ring.h KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULL Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/52bit-fixes: : . : 52bit PA fixes, courtesy of Ryan Roberts. From the cover letter: : : "I've been adding support for FEAT_LPA2 to KVM and as part of that work have been : testing various (84) configurations of HW, host and guest kernels on FVP. This : has thrown up a couple of pre-existing bugs, for which the fixes are provided." : . KVM: arm64: Fix benign bug with incorrect use of VA_BITS KVM: arm64: Fix PAR_TO_HPFAR() to work independently of PA_BITS. KVM: arm64: Fix kvm init failure when mode!=vhe and VA_BITS=52. Signed-off-by: -
Ryan Roberts authored
get_user_mapping_size() uses kvm's pgtable library to walk a user space page table created by the kernel, and in doing so, passes metadata that the library needs, including ia_bits, which defines the size of the input address. For the case where the kernel is compiled for 52 VA bits but runs on HW that does not support LVA, it will fall back to 48 VA bits at runtime. Therefore we must use vabits_actual rather than VA_BITS to get the true address size. This is benign in the current code base because the pgtable library only uses it for error checking. Fixes: 6011cf68 ("KVM: arm64: Walk userspace page tables to compute the THP mapping size") Signed-off-by:
Ryan Roberts <ryan.roberts@arm.com> Signed-off-by:
-
Marc Zyngier authored
* kvm-arm64/selftest/access-tracking: : . : Small series to add support for arm64 to access_tracking_perf_test and : correct a couple bugs along the way. : : Patches courtesy of Oliver Upton. : . KVM: selftests: Build access_tracking_perf_test for arm64 KVM: selftests: Have perf_test_util signal when to stop vCPUs Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/selftest/s2-faults: : . : New KVM/arm64 selftests exercising various sorts of S2 faults, courtesy : of Ricardo Koller. From the cover letter: : : "This series adds a new aarch64 selftest for testing stage 2 fault handling : for various combinations of guest accesses (e.g., write, S1PTW), backing : sources (e.g., anon), and types of faults (e.g., read on hugetlbfs with a : hole, write on a readonly memslot). Each test tries a different combination : and then checks that the access results in the right behavior (e.g., uffd : faults with the right address and write/read flag). [...]" : . KVM: selftests: aarch64: Add mix of tests into page_fault_test KVM: selftests: aarch64: Add readonly memslot tests into page_fault_test KVM: selftests: aarch64: Add dirty logging tests into page_fault_test KVM: selftests: aarch64: Add userfaultfd tests into page_fault_test KVM: selftests: aarch64: Add aarch64/page_fault_test KVM: selftests: Use the right memslot for code, page-tables, and data allocations KVM: selftests: Fix alignment in virt_arch_pgd_alloc() and vm_vaddr_alloc() KVM: selftests: Add vm->memslots[] and enum kvm_mem_region_type KVM: selftests: Stash backing_src_type in struct userspace_mem_region tools: Copy bitfield.h from the kernel sources KVM: selftests: aarch64: Construct DEFAULT_MAIR_EL1 using sysreg.h macros KVM: selftests: Add missing close and munmap in __vm_mem_region_delete() KVM: selftests: aarch64: Add virt_get_pte_hva() library function KVM: selftests: Add a userfaultfd library Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/selftest/linked-bps: : . : Additional selftests for the arm64 breakpoints/watchpoints, : courtesy of Reiji Watanabe. From the cover letter: : : "This series adds test cases for linked {break,watch}points to the : debug-exceptions test, and expands {break,watch}point tests to : use non-zero {break,watch}points (the current test always uses : {break,watch}point#0)." : . KVM: arm64: selftests: Test with every breakpoint/watchpoint KVM: arm64: selftests: Add a test case for a linked watchpoint KVM: arm64: selftests: Add a test case for a linked breakpoint KVM: arm64: selftests: Change debug_version() to take ID_AA64DFR0_EL1 KVM: arm64: selftests: Stop unnecessary test stage tracking of debug-exceptions KVM: arm64: selftests: Add helpers to enable debug exceptions KVM: arm64: selftests: Remove the hard-coded {b,w}pn#0 from debug-exceptions KVM: arm64: selftests: Add write_dbg{b,w}{c,v}r helpers in debug-exceptions KVM: arm64: selftests: Use FIELD_GET() to extract ID register fields Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/selftest/memslot-fixes: : . : KVM memslot selftest fixes for non-4kB page sizes, courtesy : of Gavin Shan. From the cover letter: : : "kvm/selftests/memslots_perf_test doesn't work with 64KB-page-size-host : and 4KB-page-size-guest on aarch64. In the implementation, the host and : guest page size have been hardcoded to 4KB. It's ovbiously not working : on aarch64 which supports 4KB, 16KB, 64KB individually on host and guest. : : This series tries to fix it. After the series is applied, the test runs : successfully with 64KB-page-size-host and 4KB-page-size-guest." : . KVM: selftests: memslot_perf_test: Report optimal memory slots KVM: selftests: memslot_perf_test: Consolidate memory KVM: selftests: memslot_perf_test: Support variable guest page size KVM: selftests: memslot_perf_test: Probe memory slots for once KVM: selftests: memslot_perf_test: Consolidate loop conditions in prepare_vm() KVM: selftests: memslot_perf_test: Use data->nslots in prepare_vm() Signed-off-by: -
Marc Zyngier authored
Fix the bogus masking when computing the period of a 64bit counter with 32bit overflow. It really should be treated like a 32bit counter for the purpose of the period. Reported-by:
Ricardo Koller <ricarkol@google.com> Signed-off-by:
-
- 02 Dec, 2022 6 commits
-
-
git://git.infradead.org/users/dwmw2/linuxPaolo Bonzini authored
Pull Xen-for-KVM changes from David Woodhouse: * add support for 32-bit guests in SCHEDOP_poll * the rest of the gfn-to-pfn cache API cleanup "I still haven't reinstated the last of those patches to make gpc->len immutable." Signed-off-by: -
Jim Mattson authored
CPUID.80000021H:EAX[bit 9] indicates that the SMM_CTL MSR (0xc0010116) is not supported. This defeature can be advertised by KVM_GET_SUPPORTED_CPUID regardless of whether or not the host enumerates it; currently it will be included only if the host enumerates at least leaf 8000001DH, due to a preexisting bug in QEMU that KVM has to work around (commit f751d8ea, "KVM: x86: work around QEMU issue with synthetic CPUID leaves", 2022-04-29). Signed-off-by:
-
Paolo Bonzini authored
Several symbols are not used by vendor modules but still exported. Removing them ensures that new coupling between kvm.ko and kvm-*.ko is noticed and reviewed. Co-developed-by:
Like Xu <like.xu.linux@gmail.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in some help text. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Message-Id: <20221201091354.1613652-1-colin.i.king@gmail.com> Signed-off-by:
-
Sean Christopherson authored
Convert {clear,set}_bit() to atomics as KVM's ucall implementation relies on clear_bit() being atomic, they are defined in atomic.h, and the same helpers in the kernel proper are atomic. KVM's ucall infrastructure is the only user of clear_bit() in tools/, and there are no true set_bit() users. tools/testing/nvdimm/ does make heavy use of set_bit(), but that code builds into a kernel module of sorts, i.e. pulls in all of the kernel's header and so is already getting the kernel's atomic set_bit(). Signed-off-by: -
Sean Christopherson authored
Drop the "atomic_" prefix from tools' atomic_test_and_set_bit() to match the kernel nomenclature where test_and_set_bit() is atomic, and __test_and_set_bit() provides the non-atomic variant. Signed-off-by:
-
