- 23 Jul, 2020 10 commits
-
-
Katsuhiro Suzuki authored
This patch converts ROHM BD28623UMV class D speaker amplifier binding to DT schema. Signed-off-by:
Katsuhiro Suzuki <katsuhiro@katsuster.net> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200722174215.988974-1-katsuhiro@katsuster.netSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
In order to support configuring dai fmt through DT, add some properties. These properiese are same as the properties in simple card. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/1595302910-19688-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
Support same propeties as simple card for configuring fmt from DT. In order to make this change compatible with old DT, these properties are optional. Signed-off-by:
-
Shengjiu Wang authored
ESAI interfaces may share same interrupt line with EDMA on some platforms (e.g. i.MX8QXP, i.MX8QM). Add IRQF_SHARED flag to allow sharing the irq among several devices Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Acked-by:
-
Sameer Pujar authored
Build errors are seen on 32-bit platforms because of a plain 64-by-32 division. For example, following build erros were reported. "ERROR: modpost: "__udivdi3" [sound/soc/tegra/snd-soc-tegra210-dmic.ko] undefined!" "ERROR: modpost: "__divdi3" [sound/soc/tegra/snd-soc-tegra210-dmic.ko] undefined!" This can be fixed by using div_u64() helper from 'math64.h' header. Fixes: 8c8ff982 ("ASoC: tegra: Add Tegra210 based DMIC driver") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1595492011-2411-1-git-send-email-spujar@nvidia.comSigned-off-by:
-
Randy Dunlap authored
SND_SOC_J721E_EVM should not select SND_SOC_PCM3168A_I2C when I2C is not enabled. That causes build errors, so make this driver's symbol depend on I2C. WARNING: unmet direct dependencies detected for SND_SOC_PCM3168A_I2C Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && I2C [=n] Selected by [m]: - SND_SOC_J721E_EVM [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && (DMA_OMAP [=y] || TI_EDMA [=m] || TI_K3_UDMA [=n] || COMPILE_TEST [=y]) && (ARCH_K3_J721E_SOC [=n] || COMPILE_TEST [=y]) ../sound/soc/codecs/pcm3168a-i2c.c:59:1: warning: data definition has no type or storage class module_i2c_driver(pcm3168a_i2c_driver); ^~~~~~~~~~~~~~~~~ ../sound/soc/codecs/pcm3168a-i2c.c:59:1: error: type defaults to ‘int’ in declaration of ‘module_i2c_driver’ [-Werror=implicit-int] ../sound/soc/codecs/pcm3168a-i2c.c:59:1: warning: parameter names (without types) in function declaration ../sound/soc/codecs/pcm3168a-i2c.c:49:26: warning: ‘pcm3168a_i2c_driver’ defined but not used [-Wunused-variable] static struct i2c_driver pcm3168a_i2c_driver = { ^~~~~~~~~~~~~~~~~~~ cc1: some warnings being treated as errors Fixes: 6748d055 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)") Signed-off-by:Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/e74c690c-c7f8-fd42-e461-4f33571df4ef@infradead.orgSigned-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200718112403.13709-1-grandmaster@al2klimov.deSigned-off-by:
-
James Schulman authored
Coefficient files now support additional metadata blocks, these contain machine parsable text strings describing the parameters contained in the coefficient file. Signed-off-by:
James Schulman <james.schulman@cirrus.com> Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200723110321.16382-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:
-
- 22 Jul, 2020 16 commits
-
-
Mark Brown authored
Merge series "ASoC: mediatek: mt8183: support machine driver for max98357b" from Tzung-Bi Shih <tzungbi@google.com>: The series re-uses mt8183-mt6358-ts3a227-max98357.c to support machine driver with max98357b. The 1st patch enables left justified format from mt8183 audio platform. The 2nd patch adds document for the new proposed compatible string for max98357b. The 3rd patch supports machine driver with max98357b and uses left justified format for it. Tzung-Bi Shih (3): ASoC: mediatek: mt8183: support left justified format for I2S ASoC: dt-bindings: mt8183: add compatible string for using max98357b ASoC: mediatek: mt8183: support machine driver with max98357b .../sound/mt8183-mt6358-ts3a227-max98357.txt | 1 + sound/soc/mediatek/mt8183/mt8183-dai-i2s.c | 59 ++++++++++++++++--- .../mt8183/mt8183-mt6358-ts3a227-max98357.c | 22 ++++++- 3 files changed, 73 insertions(+), 9 deletions(-) -- 2.28.0.rc0.105.gf9edc3c819-goog
-
Mark Brown authored
Daniel Baluta <daniel.baluta@nxp.com>: From: Daniel Baluta <daniel.baluta@nxp.com> This patchseries contains a couple of SOF IMX fixes found during our first IMX SOF release. Daniel Baluta (7): ASoC: SOF: define INFO_ flags in dsp_ops for imx8 ASoC: SOF: imx: Use ARRAY_SIZE instead of hardcoded value ASoC: SOF: imx8: Fix ESAI DAI driver name for i.MX8/iMX8X ASoC: SOF: imx8m: Fix SAI DAI driver for i.MX8M ASoC: SOF: imx8: Add SAI dai driver for i.MX/i.MX8X ASoC: SOF: topology: Update SAI config bclk/fsync rate ASoC: SOF: pcm: Update rate/channels for SAI/ESAI DAIs sound/soc/sof/imx/imx8.c | 24 +++++++++++++++++++++--- sound/soc/sof/imx/imx8m.c | 4 ++-- sound/soc/sof/pcm.c | 8 ++++++++ sound/soc/sof/topology.c | 2 ++ 4 files changed, 33 insertions(+), 5 deletions(-) -- 2.17.1
-
Kai Vehmanen authored
Commit 5bd70440 ("ASoC: soc-dai: revert all changes to DAI startup/shutdown sequence"), introduced a slight change of semantics to DAI startup/shutdown. If startup() returns an error, shutdown() is now called for the DAI. This causes a deadlock in hdac_hda which issues a call to snd_hda_codec_pcm_put() in case open fails. Upon error, soc_pcm_open() will call shutdown(), and pcm_put() ends up getting called twice. Result is a deadlock on pcm->open_mutex, as snd_device_free() gets called from within snd_pcm_open(). Typical task backtrace looks like this: [ 334.244627] snd_pcm_dev_disconnect+0x49/0x340 [snd_pcm] [ 334.244634] __snd_device_disconnect.part.0+0x2c/0x50 [snd] [ 334.244640] __snd_device_free+0x7f/0xc0 [snd] [ 334.244650] snd_hda_codec_pcm_put+0x87/0x120 [snd_hda_codec] [ 334.244660] soc_pcm_open+0x6a0/0xbe0 [snd_soc_core] [ 334.244676] ? dpcm_add_paths.isra.0+0x491/0x590 [snd_soc_core] [ 334.244679] ? kfree+0x9a/0x230 [ 334.244686] dpcm_be_dai_startup+0x255/0x300 [snd_soc_core] [ 334.244695] dpcm_fe_dai_open+0x20e/0xf30 [snd_soc_core] [ 334.244701] ? snd_pcm_hw_rule_muldivk+0x110/0x110 [snd_pcm] [ 334.244709] ? dpcm_be_dai_startup+0x300/0x300 [snd_soc_core] [ 334.244714] ? snd_pcm_attach_substream+0x3c4/0x540 [snd_pcm] [ 334.244719] snd_pcm_open_substream+0x69a/0xb60 [snd_pcm] [ 334.244729] ? snd_pcm_release_substream+0x30/0x30 [snd_pcm] [ 334.244732] ? __mutex_lock_slowpath+0x10/0x10 [ 334.244736] snd_pcm_open+0x1b3/0x3c0 [snd_pcm] Fixes: 5bd70440 ("ASoC: soc-dai: revert all changes to DAI startup/shutdown sequence") Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@linux.intel.com> BugLink: https://github.com/thesofproject/linux/issues/2159 Link: https://lore.kernel.org/r/20200717101950.3885187-3-kai.vehmanen@linux.intel.comSigned-off-by:
-
Kai Vehmanen authored
The hdac_hda remove implementation fails to free the hda codec resources, leading to memleaks at module unload. This gap has been there from the start, commit 6bae5ea9 ("ASoC: hdac_hda: add asoc extension for legacy HDA codec drivers"). Instead of duplicating the cleanup logic, use the common snd_hda_codec_cleanup_for_unbind() to free the resources. Remove existing code in hdac_hda to cleanup "codec.jackpoll_work" and call to snd_hdac_regmap_exit(), as these are already done in snd_hda_codec_cleanup_for_unbind(). The cleanup is done in ASoC component remove() callback and not in the HDAC bus hdev_detach(). This is done to ensure the codec specific cleanup routines are run before the parent card is freed. Fixes: 6bae5ea9 ("ASoC: hdac_hda: add asoc extension for legacy HDA codec drivers") Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> BugLink: https://github.com/thesofproject/linux/issues/2195 Link: https://lore.kernel.org/r/20200717101950.3885187-2-kai.vehmanen@linux.intel.comSigned-off-by:
-
Kai Vehmanen authored
Add error handling for patch_ops in hdac_hda_codec_probe(). Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Tzung-Bi Shih authored
Supports machine driver with max98357b ("mt8183-mt6358-ts3a227-max98357b"). The key difference from max98357a: max98357b needs to use left justified format. Signed-off-by:Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200720012559.906088-4-tzungbi@google.comSigned-off-by:
-
Tzung-Bi Shih authored
Machines with max98357b should use the compatible string "mt8183-mt6358-ts3a227-max98357b". Signed-off-by:
-
Tzung-Bi Shih authored
MT8183 audio platform supports EIAJ and I2S formats. The code fixed to use I2S format in the past. Supports EIAJ mode via set_fmt ops and preserves to use I2S format as the default format intentionally. Signed-off-by:
-
Daniel Baluta authored
Fixup BE DAI links rate/channels parameters to match any values from topology. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by:
-
Daniel Baluta authored
These parameters are read from topology file and sent to DSP. Signed-off-by:
-
Daniel Baluta authored
With SOF we support 1 ESAI interface and 1 SAI interface. This patch adds SAI1 interface support existing on i.MX8/i.MX8X boards. Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200720072046.8152-6-daniel.baluta@oss.nxp.comSigned-off-by:
-
Daniel Baluta authored
This must match DAI name from topology. Also, sai-port is too generic. Physical DAI port on i.MX8MP is labeled SAI3. Signed-off-by:
-
Daniel Baluta authored
This must match DAI name from topology. Also, esai-port is too generic as they are 2 ESAIs on i.MX8/i.MX8X boards. SOF integration only uses ESAI0 for now. Signed-off-by:
-
Daniel Baluta authored
With this change we no longer need to update num_drv when adding new DAI driver. Signed-off-by:
-
Daniel Baluta authored
In the past, the INFO_ flags such as PAUSE/NO_PERIOD_WAKEUP were defined in the SOF PCM core, but that was changed since commit 27e322fa ("ASoC: SOF: define INFO_ flags in dsp_ops") Now these flags must be set in DSP ops. Signed-off-by:
-
- 21 Jul, 2020 5 commits
-
-
Mark Brown authored
Merge series "Add ASoC AHUB components for Tegra210 and later" from Sameer Pujar <spujar@nvidia.com>: Overview ======== Audio Processing Engine (APE) comprises of Audio DMA (ADMA) and Audio Hub (AHUB) unit. AHUB is a collection of hardware accelerators for audio pre-processing and post-processing. It also includes a programmable full crossbar for routing audio data across these accelerators. This series exposes some of these below mentioned HW devices as ASoC components for Tegra platforms from Tegra210 onwards. * ADMAIF : The interface between ADMA and AHUB * XBAR : Crossbar for routing audio samples across various modules * I2S : Inter-IC Sound Controller * DMIC : Digital Microphone * DSPK : Digital Speaker Following is the summary of current series. * Add YAML DT binding documentation for above mentioned modules. * Helper function for ACIF programming is exposed for Tegra210 and later. * Add ASoC driver components for each of the above modules. * Build ACONNECT and ADMA drivers which are essential to realize audio use case. * Add DT entries for above components for Tegra210, Tegra186 and Tegra194. As per the suggestion in [0] audio graph based sound card support is pushed in a separate series. [0] https://lkml.org/lkml/2020/6/27/4 Changelog ========= v4 -> v5 -------- * Common changes - simple-card driver changes are dropped. Changes are migrated to audio graph card and are moved to a separate series as suggested. - '#sound-dai-cells' property is not needed for planned audio graph card Hence dropped from documentation and related DT binding of component drivers. - CIF and DAP DAIs are added for I/O drivers (DMIC, DSPK, I2S) to represent DAI links using audio graph card. Similary DAIs are added in AHUB driver to describe endpoints in audio crossbar. Routing is updated to reflect the same in drivers. v3 -> v4 -------- * [1/23] "ASoC: dt-bindings: tegra: Add DT bindings for Tegra210" - Removed multiple examples and retained one example per doc - Fixed as per inputs on the previous series - Tested bindings with 'make dt_binding_check/dtbs_check' * [2/23] "ASoC: tegra: Add support for CIF programming" - No change * Common changes (for patch [3/10] to [7/10]) - Mixer control overrides, for PCM parameters (rate, channel, bits), in each driver are dropped. - Updated routing as per DPCM usage - Minor changes related to formatting * New changes (patch [8/23] to [18/23] and patch [23/23]) - Based on discussions in following threads DPCM is used for Tegra Audio. https://lkml.org/lkml/2020/2/20/91 https://lkml.org/lkml/2020/4/30/519 - The simple-card driver is used for Tegra Audio and accordingly some enhancements are made in simple-card and core drivers. - Patch [8/23] to [18/23] are related to simple-card and core changes. - Patch [23/23] adds sound card support to realize complete audio path. This is based on simple-card driver with proposed enhancements. - Re-ordered patches depending on above v2 -> v3 -------- * [1/10] "dt-bindings: sound: tegra: add DT binding for AHUB - Updated licence - Removed redundancy w.r.t items/const/enum - Added constraints wherever needed with "pattern" property * [2/10] "ASoC: tegra: add support for CIF programming" - Removed tegra_cif.c - Instead added inline helper function in tegra_cif.h * common changes (for patch [3/10] to [7/10]) - Replace LATE system calls with Normal sleep - Remove explicit RPM suspend in driver remove() call - Use devm_kzalloc() instead of devm_kcalloc() for single element - Replace 'ret' with 'err' for better reading - Consistent error printing style across drivers - Minor formating fixes * [8/10] "arm64: tegra: add AHUB components for few Tegra chips" - no change * [9/10] "arm64: tegra: enable AHUB modules for few Tegra chips" - no change * [10/10] "arm64: defconfig: enable AHUB components for Tegra210 and later" (New patch) - Enables ACONNECT and AHUB components. With this AHUB and components are registered with ASoC core. v1 -> v2 -------- * [1/9] "dt-bindings: sound: tegra: add DT binding for AHUB" - no changes * [2/9] "ASoC: tegra: add support for CIF programming" - removed CIF programming changes for legacy chips. - this patch now exposes helper function for CIF programming, which can be used on Tegra210 later. - later tegra_cif.c can be extended for legacy chips as well. - updated commit message accordingly * [3/9] "ASoC: tegra: add Tegra210 based DMIC driver" - removed unnecessary initialization of 'ret' in probe() * [4/9] "ASoC: tegra: add Tegra210 based I2S driver" - removed unnecessary initialization of 'ret' in probe() - fixed indentation - added consistent bracing for if-else clauses - updated 'rx_fifo_th' type to 'unsigned int' - used BIT() macro for defines like '1 << {x}' in tegra210_i2s.h * [5/9] "ASoC: tegra: add Tegra210 based AHUB driver" - used of_device_get_match_data() to get 'soc_data' and removed explicit of_match_device() - used devm_platform_ioremap_resource() and removed explicit platform_get_resource() - fixed indentation for devm_snd_soc_register_component() - updated commit message - updated commit message to reflect compatible binding for Tegra186 and Tegra194. * [6/9] "ASoC: tegra: add Tegra186 based DSPK driver" - removed unnecessary initialization of 'ret' in probe() - updated 'max_th' to 'unsigned int' - shortened lengthy macro names to avoid wrapping in tegra186_dspk_wr_reg() and to be consistent * [7/9] "ASoC: tegra: add Tegra210 based ADMAIF driver" - used of_device_get_match_data() and removed explicit of_match_device() - used BIT() macro for defines like '1 << {x}' in tegra210_admaif.h - updated commit message to reflect compatible binding for Tegra186 and Tegra194. * [8/9] "arm64: tegra: add AHUB components for few Tegra chips" - no change * [9/9] "arm64: tegra: enable AHUB modules for few Tegra chips" - no change * common changes for patch [3/9] to [7/9] - sorted headers in alphabetical order - moved MODULE_DEVICE_TABLE() right below *_of_match table - removed macro DRV_NAME - removed explicit 'owner' field from platform_driver structure - added 'const' to snd_soc_dai_ops structure Sameer Pujar (11): ASoC: dt-bindings: tegra: Add DT bindings for Tegra210 ASoC: tegra: Add support for CIF programming ASoC: tegra: Add Tegra210 based DMIC driver ASoC: tegra: Add Tegra210 based I2S driver ASoC: tegra: Add Tegra210 based AHUB driver ASoC: tegra: Add Tegra186 based DSPK driver ASoC: tegra: Add Tegra210 based ADMAIF driver arm64: defconfig: Build AHUB component drivers arm64: defconfig: Build ADMA and ACONNECT driver arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano arm64: tegra: Add DT binding for AHUB components .../bindings/sound/nvidia,tegra186-dspk.yaml | 83 +++ .../bindings/sound/nvidia,tegra210-admaif.yaml | 111 +++ .../bindings/sound/nvidia,tegra210-ahub.yaml | 136 ++++ .../bindings/sound/nvidia,tegra210-dmic.yaml | 83 +++ .../bindings/sound/nvidia,tegra210-i2s.yaml | 101 +++ arch/arm64/boot/dts/nvidia/tegra186.dtsi | 217 +++++- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 225 +++++- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 12 + arch/arm64/boot/dts/nvidia/tegra210.dtsi | 140 ++++ arch/arm64/configs/defconfig | 8 + sound/soc/tegra/Kconfig | 56 ++ sound/soc/tegra/Makefile | 10 + sound/soc/tegra/tegra186_dspk.c | 442 +++++++++++ sound/soc/tegra/tegra186_dspk.h | 70 ++ sound/soc/tegra/tegra210_admaif.c | 800 ++++++++++++++++++++ sound/soc/tegra/tegra210_admaif.h | 162 ++++ sound/soc/tegra/tegra210_ahub.c | 676 +++++++++++++++++ sound/soc/tegra/tegra210_ahub.h | 127 ++++ sound/soc/tegra/tegra210_dmic.c | 455 ++++++++++++ sound/soc/tegra/tegra210_dmic.h | 82 +++ sound/soc/tegra/tegra210_i2s.c | 812 +++++++++++++++++++++ sound/soc/tegra/tegra210_i2s.h | 126 ++++ sound/soc/tegra/tegra_cif.h | 65 ++ sound/soc/tegra/tegra_pcm.c | 235 +++++- sound/soc/tegra/tegra_pcm.h | 21 +- 25 files changed, 5251 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml create mode 100644 sound/soc/tegra/tegra186_dspk.c create mode 100644 sound/soc/tegra/tegra186_dspk.h create mode 100644 sound/soc/tegra/tegra210_admaif.c create mode 100644 sound/soc/tegra/tegra210_admaif.h create mode 100644 sound/soc/tegra/tegra210_ahub.c create mode 100644 sound/soc/tegra/tegra210_ahub.h create mode 100644 sound/soc/tegra/tegra210_dmic.c create mode 100644 sound/soc/tegra/tegra210_dmic.h create mode 100644 sound/soc/tegra/tegra210_i2s.c create mode 100644 sound/soc/tegra/tegra210_i2s.h create mode 100644 sound/soc/tegra/tegra_cif.h -- 2.7.4
-
Sameer Pujar authored
ADMAIF is the interface between ADMA and AHUB. Each ADMA channel that sends/receives data to/from AHUB must intreface through an ADMAIF channel. ADMA channel sending data to AHUB pairs with an ADMAIF Tx channel and similarly ADMA channel receiving data from AHUB pairs with an ADMAIF Rx channel. Buffer size is configurable for each ADMAIF channel, but currently SW uses default values. This patch registers ADMAIF driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADMAIF interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow to build the driver. The ADMAIF device can be enabled in the DT via "nvidia,tegra210-admaif" compatible binding. Tegra PCM driver is updated to expose required PCM interfaces and snd_pcm_ops callbacks. Signed-off-by:
-
Dan Murphy authored
Convert the tas2770 binding to yaml format. Add in the reset-gpio to the binding as it is in the code but not documented in the binding. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Reviewed-by:
-
Dan Murphy authored
Fix the reset property name when allocating the GPIO descriptor. The gpiod_get_optional appends either the -gpio or -gpios suffix to the name. Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by:
-
Thierry Reding authored
Convert the Freescale SGTL5000 device tree bindings from free-form text format to json-schema. Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200608174658.1315325-1-thierry.reding@gmail.comSigned-off-by:
-
- 20 Jul, 2020 9 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: machine driver updates for 5.9" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Small patchset to harden the SoundWire machine driver, change bad HIDs, update PLL settings and avoid memory leaks. Given that the SoundWire core parts are not upstream it's probably not necessary to provide the patches to stable branches. Bard Liao (1): ASoC: Intel: sof_sdw_rt711: remove hard-coded codec name Kai Vehmanen (2): ASoC: Intel: sof_sdw: add support for systems without i915 audio ASoC: Intel: sof_sdw: avoid crash if invalid DSP topology loaded Libin Yang (1): ASoC: Intel: common: change match table ehl-rt5660 Pierre-Louis Bossart (1): ASoC: Intel: sof_sdw_rt711: remove properties in card remove Yong Zhi (1): ASoC: intel: board: sof_rt5682: Update rt1015 pll input clk freq sound/soc/intel/boards/sof_rt5682.c | 9 +++++- sound/soc/intel/boards/sof_sdw.c | 31 +++++++++++++------ sound/soc/intel/boards/sof_sdw_common.h | 2 ++ sound/soc/intel/boards/sof_sdw_hdmi.c | 6 ++++ sound/soc/intel/boards/sof_sdw_rt711.c | 17 +++++++++- .../intel/common/soc-acpi-intel-ehl-match.c | 2 +- 6 files changed, 54 insertions(+), 13 deletions(-) base-commit: 22e9b543 -- 2.25.1
-
Yong Zhi authored
In commit d696a614 ("ASoC: rt1015: Add condition to prevent SoC providing bclk in ratio of 50 times of sample rate."), PLL input at 50fs is no longer supported, the new recommended settings at 48Khz rate are: PLL input SSP bclk ------------------------ 64fs 3.073Mhz 100fs 4.8Mhz (bclk update is reflected in topoplogy.) Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
-
Kai Vehmanen authored
The mc_private->hdmi_pcm_list is populated by elements loaded during DSP topology load. Valid topologies for this machine driver will always have PCM nodes for HDMI, but driver should fail gracefully even in the case this is not true. Add a sanity check to sof_sdw_hdmi_card_late_probe() for this case. Without the fix, a null pcm handle gets dereferenced. Signed-off-by:
-
Kai Vehmanen authored
Extend the generic SOF Soundwire machine driver to support systems where iDisp HDMI/DP audio codec is disabled for some reason (i915 driver disabled, HDMI/DP implemented with a discrete GPU, etc). Switch codecs to SoC dummy in the affected DAI links. This allows to reuse existing topologies for this case. Signed-off-by:
-
Pierre-Louis Bossart authored
The rt711 jack detection properties are set from the machine drivers during the card probe, as done in other ASoC examples. KASAN reports a use-after-free error when unbinding drivers due to a confusing sequence between the ACPI core, the device core and the SoundWire device cleanups. Rather than fixing this sequence, follow the recommendation to have the same caller add and remove properties, add an explicit device_remove_properties() in the card .remove() callback. In future patches the use of device_add/remove_properties will be replaced by a direct handling of a swnode, but the sequence will remain the same. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Bard Liao authored
We can get codec name from dai link. Suggested-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
-
Mark Brown authored
Merge series "Add ASoC AHUB components for Tegra210 and later" from Sameer Pujar <spujar@nvidia.com>: Overview ======== Audio Processing Engine (APE) comprises of Audio DMA (ADMA) and Audio Hub (AHUB) unit. AHUB is a collection of hardware accelerators for audio pre-processing and post-processing. It also includes a programmable full crossbar for routing audio data across these accelerators. This series exposes some of these below mentioned HW devices as ASoC components for Tegra platforms from Tegra210 onwards. * ADMAIF : The interface between ADMA and AHUB * XBAR : Crossbar for routing audio samples across various modules * I2S : Inter-IC Sound Controller * DMIC : Digital Microphone * DSPK : Digital Speaker Following is the summary of current series. * Add YAML DT binding documentation for above mentioned modules. * Helper function for ACIF programming is exposed for Tegra210 and later. * Add ASoC driver components for each of the above modules. * Build ACONNECT and ADMA drivers which are essential to realize audio use case. * Add DT entries for above components for Tegra210, Tegra186 and Tegra194. As per the suggestion in [0] audio graph based sound card support is pushed in a separate series. [0] https://lkml.org/lkml/2020/6/27/4 Changelog ========= v4 -> v5 -------- * Common changes - simple-card driver changes are dropped. Changes are migrated to audio graph card and are moved to a separate series as suggested. - '#sound-dai-cells' property is not needed for planned audio graph card Hence dropped from documentation and related DT binding of component drivers. - CIF and DAP DAIs are added for I/O drivers (DMIC, DSPK, I2S) to represent DAI links using audio graph card. Similary DAIs are added in AHUB driver to describe endpoints in audio crossbar. Routing is updated to reflect the same in drivers. v3 -> v4 -------- * [1/23] "ASoC: dt-bindings: tegra: Add DT bindings for Tegra210" - Removed multiple examples and retained one example per doc - Fixed as per inputs on the previous series - Tested bindings with 'make dt_binding_check/dtbs_check' * [2/23] "ASoC: tegra: Add support for CIF programming" - No change * Common changes (for patch [3/10] to [7/10]) - Mixer control overrides, for PCM parameters (rate, channel, bits), in each driver are dropped. - Updated routing as per DPCM usage - Minor changes related to formatting * New changes (patch [8/23] to [18/23] and patch [23/23]) - Based on discussions in following threads DPCM is used for Tegra Audio. https://lkml.org/lkml/2020/2/20/91 https://lkml.org/lkml/2020/4/30/519 - The simple-card driver is used for Tegra Audio and accordingly some enhancements are made in simple-card and core drivers. - Patch [8/23] to [18/23] are related to simple-card and core changes. - Patch [23/23] adds sound card support to realize complete audio path. This is based on simple-card driver with proposed enhancements. - Re-ordered patches depending on above v2 -> v3 -------- * [1/10] "dt-bindings: sound: tegra: add DT binding for AHUB - Updated licence - Removed redundancy w.r.t items/const/enum - Added constraints wherever needed with "pattern" property * [2/10] "ASoC: tegra: add support for CIF programming" - Removed tegra_cif.c - Instead added inline helper function in tegra_cif.h * common changes (for patch [3/10] to [7/10]) - Replace LATE system calls with Normal sleep - Remove explicit RPM suspend in driver remove() call - Use devm_kzalloc() instead of devm_kcalloc() for single element - Replace 'ret' with 'err' for better reading - Consistent error printing style across drivers - Minor formating fixes * [8/10] "arm64: tegra: add AHUB components for few Tegra chips" - no change * [9/10] "arm64: tegra: enable AHUB modules for few Tegra chips" - no change * [10/10] "arm64: defconfig: enable AHUB components for Tegra210 and later" (New patch) - Enables ACONNECT and AHUB components. With this AHUB and components are registered with ASoC core. v1 -> v2 -------- * [1/9] "dt-bindings: sound: tegra: add DT binding for AHUB" - no changes * [2/9] "ASoC: tegra: add support for CIF programming" - removed CIF programming changes for legacy chips. - this patch now exposes helper function for CIF programming, which can be used on Tegra210 later. - later tegra_cif.c can be extended for legacy chips as well. - updated commit message accordingly * [3/9] "ASoC: tegra: add Tegra210 based DMIC driver" - removed unnecessary initialization of 'ret' in probe() * [4/9] "ASoC: tegra: add Tegra210 based I2S driver" - removed unnecessary initialization of 'ret' in probe() - fixed indentation - added consistent bracing for if-else clauses - updated 'rx_fifo_th' type to 'unsigned int' - used BIT() macro for defines like '1 << {x}' in tegra210_i2s.h * [5/9] "ASoC: tegra: add Tegra210 based AHUB driver" - used of_device_get_match_data() to get 'soc_data' and removed explicit of_match_device() - used devm_platform_ioremap_resource() and removed explicit platform_get_resource() - fixed indentation for devm_snd_soc_register_component() - updated commit message - updated commit message to reflect compatible binding for Tegra186 and Tegra194. * [6/9] "ASoC: tegra: add Tegra186 based DSPK driver" - removed unnecessary initialization of 'ret' in probe() - updated 'max_th' to 'unsigned int' - shortened lengthy macro names to avoid wrapping in tegra186_dspk_wr_reg() and to be consistent * [7/9] "ASoC: tegra: add Tegra210 based ADMAIF driver" - used of_device_get_match_data() and removed explicit of_match_device() - used BIT() macro for defines like '1 << {x}' in tegra210_admaif.h - updated commit message to reflect compatible binding for Tegra186 and Tegra194. * [8/9] "arm64: tegra: add AHUB components for few Tegra chips" - no change * [9/9] "arm64: tegra: enable AHUB modules for few Tegra chips" - no change * common changes for patch [3/9] to [7/9] - sorted headers in alphabetical order - moved MODULE_DEVICE_TABLE() right below *_of_match table - removed macro DRV_NAME - removed explicit 'owner' field from platform_driver structure - added 'const' to snd_soc_dai_ops structure Sameer Pujar (11): ASoC: dt-bindings: tegra: Add DT bindings for Tegra210 ASoC: tegra: Add support for CIF programming ASoC: tegra: Add Tegra210 based DMIC driver ASoC: tegra: Add Tegra210 based I2S driver ASoC: tegra: Add Tegra210 based AHUB driver ASoC: tegra: Add Tegra186 based DSPK driver ASoC: tegra: Add Tegra210 based ADMAIF driver arm64: defconfig: Build AHUB component drivers arm64: defconfig: Build ADMA and ACONNECT driver arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano arm64: tegra: Add DT binding for AHUB components .../bindings/sound/nvidia,tegra186-dspk.yaml | 83 +++ .../bindings/sound/nvidia,tegra210-admaif.yaml | 111 +++ .../bindings/sound/nvidia,tegra210-ahub.yaml | 136 ++++ .../bindings/sound/nvidia,tegra210-dmic.yaml | 83 +++ .../bindings/sound/nvidia,tegra210-i2s.yaml | 101 +++ arch/arm64/boot/dts/nvidia/tegra186.dtsi | 217 +++++- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 225 +++++- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 12 + arch/arm64/boot/dts/nvidia/tegra210.dtsi | 140 ++++ arch/arm64/configs/defconfig | 8 + sound/soc/tegra/Kconfig | 56 ++ sound/soc/tegra/Makefile | 10 + sound/soc/tegra/tegra186_dspk.c | 442 +++++++++++ sound/soc/tegra/tegra186_dspk.h | 70 ++ sound/soc/tegra/tegra210_admaif.c | 800 ++++++++++++++++++++ sound/soc/tegra/tegra210_admaif.h | 162 ++++ sound/soc/tegra/tegra210_ahub.c | 676 +++++++++++++++++ sound/soc/tegra/tegra210_ahub.h | 127 ++++ sound/soc/tegra/tegra210_dmic.c | 455 ++++++++++++ sound/soc/tegra/tegra210_dmic.h | 82 +++ sound/soc/tegra/tegra210_i2s.c | 812 +++++++++++++++++++++ sound/soc/tegra/tegra210_i2s.h | 126 ++++ sound/soc/tegra/tegra_cif.h | 65 ++ sound/soc/tegra/tegra_pcm.c | 235 +++++- sound/soc/tegra/tegra_pcm.h | 21 +- 25 files changed, 5251 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml create mode 100644 sound/soc/tegra/tegra186_dspk.c create mode 100644 sound/soc/tegra/tegra186_dspk.h create mode 100644 sound/soc/tegra/tegra210_admaif.c create mode 100644 sound/soc/tegra/tegra210_admaif.h create mode 100644 sound/soc/tegra/tegra210_ahub.c create mode 100644 sound/soc/tegra/tegra210_ahub.h create mode 100644 sound/soc/tegra/tegra210_dmic.c create mode 100644 sound/soc/tegra/tegra210_dmic.h create mode 100644 sound/soc/tegra/tegra210_i2s.c create mode 100644 sound/soc/tegra/tegra210_i2s.h create mode 100644 sound/soc/tegra/tegra_cif.h -- 2.7.4
-
Mark Brown authored
Merge series "ASoC: Intel: machine driver updates for 5.9" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Small patchset to harden the SoundWire machine driver, change bad HIDs, update PLL settings and avoid memory leaks. Given that the SoundWire core parts are not upstream it's probably not necessary to provide the patches to stable branches. Bard Liao (1): ASoC: Intel: sof_sdw_rt711: remove hard-coded codec name Kai Vehmanen (2): ASoC: Intel: sof_sdw: add support for systems without i915 audio ASoC: Intel: sof_sdw: avoid crash if invalid DSP topology loaded Libin Yang (1): ASoC: Intel: common: change match table ehl-rt5660 Pierre-Louis Bossart (1): ASoC: Intel: sof_sdw_rt711: remove properties in card remove Yong Zhi (1): ASoC: intel: board: sof_rt5682: Update rt1015 pll input clk freq sound/soc/intel/boards/sof_rt5682.c | 9 +++++- sound/soc/intel/boards/sof_sdw.c | 31 +++++++++++++------ sound/soc/intel/boards/sof_sdw_common.h | 2 ++ sound/soc/intel/boards/sof_sdw_hdmi.c | 6 ++++ sound/soc/intel/boards/sof_sdw_rt711.c | 17 +++++++++- .../intel/common/soc-acpi-intel-ehl-match.c | 2 +- 6 files changed, 54 insertions(+), 13 deletions(-) base-commit: 22e9b543 -- 2.25.1
-
Randy Dunlap authored
Drop the repeated word "be" in a comment. Signed-off-by:
-
