- 14 Dec, 2023 30 commits
-
-
Paul M Stillwell Jr authored
Once users have configured the FW logging then allow them to enable it by writing to the 'fwlog/enable' file. The file accepts a boolean value (0 or 1) where 1 means enable FW logging and 0 means disable FW logging. # echo <value> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/enable Where <value> is 0 or 1. The user can read the 'fwlog/enable' file to see whether logging is enabled or not. Reading the actual data is a separate patch. To see the current value then: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/enable Signed-off-by:
Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Paul M Stillwell Jr authored
Users want the ability to debug FW issues by retrieving the FW logs from the E8xx devices. Use debugfs to allow the user to configure the log level and number of messages for FW logging. If FW logging is supported on the E8xx then the file 'fwlog' will be created under the PCI device ID for the ice driver. If the file does not exist then either the E8xx doesn't support FW logging or debugfs is not enabled on the system. One thing users want to do is control which events are reported. The user can read and write the 'fwlog/modules/<module name>' to get/set the log levels. Each module in the FW that supports logging ht as a file under 'fwlog/modules' that supports reading (to see what the current log level is) and writing (to change the log level). The format to set the log levels for a module are: # echo <log level> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/<module> The supported log levels are: * none * error * warning * normal * verbose Each level includes the messages from the previous/lower level The modules that are supported are: * general * ctrl * link * link_topo * dnl * i2c * sdp * mdio * adminq * hdma * lldp * dcbx * dcb * xlr * nvm * auth * vpd * iosf * parser * sw * scheduler * txq * rsvd * post * watchdog * task_dispatch * mng * synce * health * tsdrv * pfreg * mdlver * all The module 'all' is a special module which allows the user to read or write to all of the modules. The following example command would set the DCB module to the 'normal' log level: # echo normal > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb If the user wants to set the DCB, Link, and the AdminQ modules to 'verbose' then the commands are: # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/link # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/adminq If the user wants to set all modules to the 'warning' level then the command is: # echo warning > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all If the user wants to disable logging for a module then they can set the level to 'none'. An example setting the 'watchdog' module is: # echo none > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/watchdog If the user wants to see what the log level is for a specific module then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb This will return the log level for the DCB module. If the user wants to see the log level for all the modules then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all Writing to the module file will update the configuration, but NOT enable the configuration (that is a separate command). In addition to configuring the modules, the user can also configure the number of log messages (nr_messages) to include in a single Admin Receive Queue (ARQ) event.The range is 1-128 (1 means push every log message, 128 means push only when the max AQ command buffer is full). The suggested value is 10. To see/change the resolution the user can read/write the 'fwlog/nr_messages' file. An example changing the value to 50 is # echo 50 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages To see the current value of 'nr_messages' then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages Signed-off-by: -
Paul M Stillwell Jr authored
The FW logging code doesn't work because there is no way to set cq_ena or uart_ena so remove the code. This code is the original (v1) way of FW logging so it should be replaced with the v2 way. Signed-off-by:
-
Stefan Eichenberger authored
Currently, mvpp2 only supports RGMII. This commit adds support for MII. The description in Marvell's functional specification seems to be wrong. To enable MII, we need to set GENCONF_CTRL0_PORT3_RGMII, while for RGMII we need to clear it. This is also how U-Boot handles it. Signed-off-by:
Stefan Eichenberger <eichest@gmail.com> Reviewed-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by:
Marcin Wojtas <mw@semihalf.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20231212141200.62579-1-eichest@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-12-12 (igb, e1000e) This series contains updates to igb and e1000e drivers. Ilpo Järvinen does some cleanups to both drivers: utilizing FIELD_GET() helpers and using standard kernel defines over driver created ones. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: e1000e: Use pcie_capability_read_word() for reading LNKSTA e1000e: Use PCI_EXP_LNKSTA_NLW & FIELD_GET() instead of custom defines/code igb: Use FIELD_GET() to extract Link Width ==================== Link: https://lore.kernel.org/r/20231212204947.513563-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Ahmed Zaki says: ==================== Support symmetric-xor RSS hash Patches 1 and 2 modify the get/set_rxh ethtool API to take a pointer to struct of parameters instead of individual params. This will allow future changes to the uAPI-shared struct ethtool_rxfh without changing the drivers' API. Patch 3 adds the support at the Kernel level, allowing the user to set a symmetric-xor RSS hash for a netdevice via: # ethtool -X eth0 hfunc toeplitz symmetric-xor and clears the flag via: # ethtool -X eth0 hfunc toeplitz The "symmetric-xor" is set in a new "input_xfrm" field in struct ethtool_rxfh. Support for the new "symmetric-xor" flag will be later sent to the "ethtool" user-space tool. Patch 4 fixes a long standing bug with the ice hash function register values. The bug has been benign for now since only (asymmetric) Toeplitz hash (Zero) has been used. Patches 5 and 6 lay some groundwork refactoring. While the first is mainly cosmetic, the second is needed since there is no more room in the previous 64-bit RSS profile ID for the symmetric attribute introduced in the next patch. Finally, patches 7 and 8 add the symmetric-xor support for the ice (E800 PFs) and the iAVF drivers. ==================== Link: https://lore.kernel.org/r/20231213003321.605376-1-ahmed.zaki@intel.comSigned-off-by: -
Ahmed Zaki authored
Allow the user to set the symmetric Toeplitz hash function via: # ethtool -X eth0 hfunc toeplitz symmetric-xor The driver will reject any new RSS configuration if a field other than (IP src/dst and L4 src/dst ports) is requested for hashing. The symmetric RSS will not be supported on PFs not advertising the ADV RSS Offload flag (ADV_RSS_SUPPORT()), for example the E700 series (i40e). Reviewed-by:Madhu Chittim <madhu.chittim@intel.com> Signed-off-by:
Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-9-ahmed.zaki@intel.comSigned-off-by:
-
Jeff Guo authored
Allow the user to set the symmetric Toeplitz hash function via: # ethtool -X eth0 hfunc toeplitz symmetric-xor All existing RSS configurations will be converted to symmetric unless they have a non-symmetric field (other than IP src/dst and L4 src/dst ports) used for hashing. The driver will reject a new RSS configuration if such a field is requested. The hash function in the E800 NICs is set per-VSI and a specific AQ command is needed to modify the hash function. Use the AQ command to enable setting the symmetric Toeplitz RSS hash function for any VSI in the new ice_set_rss_hfunc(). When the Symmetric Toeplitz hash function is used, the hardware sets the input set of the RSS (Toeplitz) algorithm to be the XOR of the fields index by HSYMM and the fields index by the INSET registers. We use this to create a symmetric hash by setting the HSYMM registers to point to their counterparts in the INSET registers: HSYMM [src_fv] = dst_fv; HSYMM [dst_fv] = src_fv; where src_fv and dst_fv are the indexes of the protocol's src and dst fields. Reviewed-by:Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
Jeff Guo <jia.guo@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by:
-
Ahmed Zaki authored
The flow director and RSS blocks use separate methods to generate a unique 64 bit ID for the flow. This is not extendable, especially for the RSS that already uses all 64 bit space. Refactor the flow generation API so that the ID is generated within ice_flow_add_prof(). The FD and RSS blocks caches the generated ID for later use. Suggested-by:
Dan Nowlin <dan.nowlin@intel.com> Reviewed-by:
-
Qi Zhang authored
Refactor the driver to use a communication data structure for RSS config. To do so we introduce the new ice_rss_hash_cfg struct, and then pass it as an argument to several functions. Also introduce enum ice_rss_cfg_hdr_type to specify a more granular and flexible RSS configuration: ICE_RSS_OUTER_HEADERS - take outer layer as RSS input set ICE_RSS_INNER_HEADERS - take inner layer as RSS input set ICE_RSS_INNER_HEADERS_W_OUTER_IPV4 - take inner layer as RSS input set for packet with outer IPV4 ICE_RSS_INNER_HEADERS_W_OUTER_IPV6 - take inner layer as RSS input set for packet with outer IPV6 ICE_RSS_ANY_HEADERS - try with outer first then inner (same as the behaviour without this change) Finally, move the virtchnl_rss_algorithm enum to be with the other RSS related structures in the virtchnl.h file. There should be no functional change due to this patch. Reviewed-by:Qi Zhang <qi.z.zhang@intel.com> Co-developed-by:
-
Ahmed Zaki authored
Fix the values of the ICE_AQ_VSI_Q_OPT_RSS_* registers. Shifting is already done when the values are used, no need to double shift. Bug was not discovered earlier since only ICE_AQ_VSI_Q_OPT_RSS_TPLZ (Zero) is currently used. Also, rename ICE_AQ_VSI_Q_OPT_RSS_XXX to ICE_AQ_VSI_Q_OPT_RSS_HASH_XXX for consistency. Co-developed-by:
-
Ahmed Zaki authored
Symmetric RSS hash functions are beneficial in applications that monitor both Tx and Rx packets of the same flow (IDS, software firewalls, ..etc). Getting all traffic of the same flow on the same RX queue results in higher CPU cache efficiency. A NIC that supports "symmetric-xor" can achieve this RSS hash symmetry by XORing the source and destination fields and pass the values to the RSS hash algorithm. The user may request RSS hash symmetry for a specific algorithm, via: # ethtool -X eth0 hfunc <hash_alg> symmetric-xor or turn symmetry off (asymmetric) by: # ethtool -X eth0 hfunc <hash_alg> The specific fields for each flow type should then be specified as usual via: # ethtool -N|-U eth0 rx-flow-hash <flow_type> s|d|f|n Reviewed-by: -
Ahmed Zaki authored
Add the RSS context parameters to struct ethtool_rxfh_param and use the get/set_rxfh to handle the RSS contexts as well. This is part 2/2 of the fix suggested in [1]: - Add a rss_context member to the argument struct and a capability like cap_link_lanes_supported to indicate whether driver supports rss contexts, then you can remove *et_rxfh_context functions, and instead call *et_rxfh() with a non-zero rss_context. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Tony Nguyen <anthony.l.nguyen@intel.com> CC: Marcin Wojtas <mw@semihalf.com> CC: Russell King <linux@armlinux.org.uk> CC: Sunil Goutham <sgoutham@marvell.com> CC: Geetha sowjanya <gakula@marvell.com> CC: Subbaraya Sundeep <sbhatta@marvell.com> CC: hariprasad <hkelam@marvell.com> CC: Saeed Mahameed <saeedm@nvidia.com> CC: Leon Romanovsky <leon@kernel.org> CC: Edward Cree <ecree.xilinx@gmail.com> CC: Martin Habets <habetsm.xilinx@gmail.com> Suggested-by:
-
Ahmed Zaki authored
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Jakub Kicinski authored
Releasing the DMA mapping will be useful for other types of pages, so factor it out. Make sure compiler inlines it, to avoid any regressions. Signed-off-by:
Mina Almasry <almasrymina@google.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Reviewed-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
-
Liang Chen authored
To support multiple users referencing the same fragment, 'pp_frag_count' is renamed to 'pp_ref_count', transitioning pp pages from fragment management to reference count management after draining based on the suggestion from [1]. The idea is that the concept of fragmenting exists before the page is drained, and all related functions retain their current names. However, once the page is drained, its management shifts to being governed by 'pp_ref_count'. Therefore, all functions associated with that lifecycle stage of a pp page are renamed. [1] http://lore.kernel.org/netdev/f71d9448-70c8-8793-dc9a-0eb48a570300@huawei.comSigned-off-by:
Liang Chen <liangchen.linux@gmail.com> Reviewed-by:
Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by:
-
Kees Cook authored
Builds with W=1 were warning about potential string truncations: drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c: In function 'cxgb_up': drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:394:38: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 5 and 20 [-Wformat-truncation=] 394 | "%s-%d", d->name, pi->first_qset + i); | ^~ In function 'name_msix_vecs', inlined from 'cxgb_up' at drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:1264:3: drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:394:34: note: directive argument in the range [-2147483641, 509] 394 | "%s-%d", d->name, pi->first_qset + i); | ^~~~~~~ drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:393:25: note: 'snprintf' output between 3 and 28 bytes into a destination of size 21 393 | snprintf(adap->msix_info[msi_idx].desc, n, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 394 | "%s-%d", d->name, pi->first_qset + i); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Avoid open-coded %NUL-termination (this code was assuming snprintf wasn't %NUL terminating when it does -- likely thinking of strncpy), and grow the size of the string to handle a maximal value. Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312100937.ZPZCARhB-lkp@intel.com/ Cc: Raju Rangoju <rajur@chelsio.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231212220954.work.219-kees@kernel.orgSigned-off-by:
-
Kees Cook authored
Build with W=1 were warning about a potential string truncation: drivers/net/ethernet/amd/xgbe/xgbe-drv.c: In function 'xgbe_alloc_channels': drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:73: warning: '%u' directive output may be truncated writing between 1 and 10 bytes into a region of size 8 [-Wformat-truncation=] 211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i); | ^~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:64: note: directive argument in the range [0, 4294967294] 211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i); | ^~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:17: note: 'snprintf' output between 10 and 19 bytes into a destination of size 16 211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Increase the size of the "name" buffer to handle the full format range. Reported-by: -
Jiri Pirko authored
Pin ID is just a number. Nobody should rely on a certain value, instead, user should use either pin-id-get op or RTNetlink to get it. Unify the pin ID allocation behavior with what there is already implemented for dpll devices. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20231212150605.1141261-1-jiri@resnulli.usSigned-off-by:
-
Eric Dumazet authored
For some reason sctp_poll() generates EPOLLERR if sk->sk_error_queue is not empty but recvmsg() can not drain the error queue yet. This is needed to better support timestamping. I had to export inet_recv_error(), since sctp can be compiled as a module. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20231212145550.3872051-1-edumazet@google.comSigned-off-by:
-
Jakub Kicinski authored
Alexander Lobakin says: ==================== idpf: add get/set for Ethtool's header split ringparam Currently, the header split feature (putting headers in one smaller buffer and then the data in a separate bigger one) is always enabled in idpf when supported. One may want to not have fragmented frames per each packet, for example, to avoid XDP frags. To better optimize setups for particular workloads, add ability to switch the header split state on and off via Ethtool's ringparams, as well as to query the current status. There's currently only GET in the Ethtool Netlink interface for now, so add SET first. I suspect idpf is not the only one supporting this. ==================== Link: https://lore.kernel.org/r/20231212142752.935000-1-aleksander.lobakin@intel.comSigned-off-by:
-
Michal Kubiak authored
idpf supports the header split feature and that feature is always enabled by default. However, for flexibility reasons and to simplify some scenarios, it would be useful to have the support for switching the header split off (and on) from the userspace. Address that need by adding the user config parameter, the functions for disabling (or enabling) the header split feature, and calls to them from the Ethtool ringparam callbacks. It still is enabled by default if supported by the hardware. Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
Michal Kubiak <michal.kubiak@intel.com> Co-developed-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by:
-
Alexander Lobakin authored
Follow up commit 9690ae60 ("ethtool: add header/data split indication") and add the set part of Ethtool's header split, i.e. ability to enable/disable header split via the Ethtool Netlink interface. This might be helpful to optimize the setup for particular workloads, for example, to avoid XDP frags, and so on. A driver should advertise ``ETHTOOL_RING_USE_TCP_DATA_SPLIT`` in its ops->supported_ring_params to allow doing that. "Unknown" passed from the userspace when the header split is supported means the driver is free to choose the preferred state. Reviewed-by:
-
Eric Dumazet authored
TCP got MSG_EOR support in linux-4.7. This is a canonical way of making sure no coalescing will be performed on the skb, even if it could not be immediately sent. Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20231212110608.3673677-1-edumazet@google.comSigned-off-by:
-
Jakub Kicinski authored
Oleksij Rempel says: ==================== add support for DP83TG720S PHY ==================== Link: https://lore.kernel.org/r/20231212054144.87527-1-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
The DP83TG720S-Q1 device is an IEEE 802.3bp and Open Alliance compliant automotive Ethernet physical layer transceiver. This driver was tested with i.MX8MP EQOS (stmmac) on the MAC side and same TI PHY on other side. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
Oleksij Rempel authored
Move part of the genphy_c45_pma_read_abilities() code to a separate function. Some PHYs do not implement PMA/PMD status 2 register (Register 1.8) but do implement PMA/PMD extended ability register (Register 1.11). To make use of it, we need to be able to access this part of code separately. Signed-off-by:
-
Jakub Kicinski authored
Pedro Tammela says: ==================== net/sched: optimizations around action binding and init Scaling optimizations for action binding in rtnl-less filters. We saw a noticeable lock contention around idrinfo->lock when testing in a 56 core system, which disappeared after the patches. ==================== Link: https://lore.kernel.org/r/20231211181807.96028-1-pctammela@mojatatu.comSigned-off-by:
-
Pedro Tammela authored
tcf_idr_insert_many will replace the allocated -EBUSY pointer in tcf_idr_check_alloc with the real action pointer, exposing it to all operations. This operation is only needed when the action pointer is created (ACT_P_CREATED). For actions which are bound to (returned 0), the pointer already resides in the idr making such operation a nop. Even though it's a nop, it's still not a cheap operation as internally the idr code walks the idr and then does a replace on the appropriate slot. So if the action was bound, better skip the idr replace entirely. Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by:
Vlad Buslov <vladbu@nvidia.com> Link: https://lore.kernel.org/r/20231211181807.96028-3-pctammela@mojatatu.comSigned-off-by:
-
Pedro Tammela authored
Instead of relying only on the idrinfo->lock mutex for bind/alloc logic, rely on a combination of rcu + mutex + atomics to better scale the case where multiple rtnl-less filters are binding to the same action object. Action binding happens when an action index is specified explicitly and an action exists which such index exists. Example: tc actions add action drop index 1 tc filter add ... matchall action drop index 1 tc filter add ... matchall action drop index 1 tc filter add ... matchall action drop index 1 tc filter ls ... filter protocol all pref 49150 matchall chain 0 filter protocol all pref 49150 matchall chain 0 handle 0x1 not_in_hw action order 1: gact action drop random type none pass val 0 index 1 ref 4 bind 3 filter protocol all pref 49151 matchall chain 0 filter protocol all pref 49151 matchall chain 0 handle 0x1 not_in_hw action order 1: gact action drop random type none pass val 0 index 1 ref 4 bind 3 filter protocol all pref 49152 matchall chain 0 filter protocol all pref 49152 matchall chain 0 handle 0x1 not_in_hw action order 1: gact action drop random type none pass val 0 index 1 ref 4 bind 3 When no index is specified, as before, grab the mutex and allocate in the idr the next available id. In this version, as opposed to before, it's simplified to store the -EBUSY pointer instead of the previous alloc + replace combination. When an index is specified, rely on rcu to find if there's an object in such index. If there's none, fallback to the above, serializing on the mutex and reserving the specified id. If there's one, it can be an -EBUSY pointer, in which case we just try again until it's an action, or an action. Given the rcu guarantees, the action found could be dead and therefore we need to bump the refcount if it's not 0, handling the case it's in fact 0. As bind and the action refcount are already atomics, these increments can happen without the mutex protection while many tcf_idr_check_alloc race to bind to the same action instance. In case binding encounters a parallel delete or add, it will return -EAGAIN in order to try again. Both filter and action apis already have the retry machinery in-place. In case it's an unlocked filter it retries under the rtnl lock. Signed-off-by:
-
- 13 Dec, 2023 10 commits
-
-
David S. Miller authored
Heng Qi says: ==================== virtio-net: support dynamic coalescing moderation Now, virtio-net already supports per-queue moderation parameter setting. Based on this, we use the linux dimlib to support dynamic coalescing moderation for virtio-net. Due to some scheduling issues, we only support and test the rx dim. Some test results: I. Sockperf UDP ================================================= 1. Env rxq_0 with affinity to cpu_0. 2. Cmd client: taskset -c 0 sockperf tp -p 8989 -i $IP -t 10 -m 16B server: taskset -c 0 sockperf sr -p 8989 3. Result dim off: 1143277.00 rxpps, throughput 17.844 MBps, cpu is 100%. dim on: 1124161.00 rxpps, throughput 17.610 MBps, cpu is 83.5%. ================================================= II. Redis ================================================= 1. Env There are 8 rxqs, and rxq_i with affinity to cpu_i. 2. Result When all cpus are 100%, ops/sec of memtier_benchmark client is dim off: 978437.23 dim on: 1143638.28 ================================================= III. Nginx ================================================= 1. Env There are 8 rxqs and rxq_i with affinity to cpu_i. 2. Result When all cpus are 100%, requests/sec of wrk client is dim off: 877931.67 dim on: 1019160.31 ================================================= IV. Latency of sockperf udp ================================================= 1. Rx cmd taskset -c 0 sockperf sr -p 8989 2. Tx cmd taskset -c 0 sockperf pp -i ${ip} -p 8989 -t 10 After running this cmd 5 times and averaging the results, 3. Result dim off: 17.7735 usec dim on: 18.0110 usec ================================================= Changelog: v7->v8: - Add select DIMLIB. v6->v7: - Drop the patch titled "spin lock for ctrl cmd access" - Use rtnl_trylock to avoid the deadlock. v5->v6: - Add patch(4/5): spin lock for ctrl cmd access - Patch(5/5): - Use spin lock and cancel_work_sync to synchronize v4->v5: - Patch(4/4): - Fix possible synchronization issues with cancel_work_sync. - Reduce if/else nesting levels v3->v4: - Patch(5/5): drop. v2->v3: - Patch(4/5): some minor modifications. v1->v2: - Patch(2/5): a minor fix. - Patch(4/5): - improve the judgment of dim switch conditions. - Cancel the work when vq reset. - Patch(5/5): drop the tx dim implementation. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Heng Qi authored
By comparing the traffic information in the complete napi processes, let the virtio-net driver automatically adjust the coalescing moderation parameters of each receive queue. Signed-off-by:
Heng Qi <hengqi@linux.alibaba.com> Signed-off-by:
-
Heng Qi authored
Extract commands to set virtqueue coalescing parameters for reuse by ethtool -Q, vq resize and netdim. Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Heng Qi authored
This patch separates the rx and tx global coalescing moderation commands to support netdim switches in subsequent patches. Signed-off-by:
-
Heng Qi authored
rx netdim needs to count the traffic during a complete napi process, and start updating and comparing samples to make decisions after the napi ends. Let virtqueue_napi_complete() return true if napi is done, otherwise vice versa. Signed-off-by:
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: updates to PCI error handling These are improvements to our PCI error handling, including FLR and AER events. ==================== Signed-off-by: -
Shannon Nelson authored
Set up the pci_error_handlers error_detected and resume to be useful in handling AER events. If the error detected is pci_channel_io_frozen we set up to do an FLR at the end of the AER handling - this tends to clear things up well enough that traffic can continue. Else, let the AER/PCI machinery do what is needed for the less serious errors seen. Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Reviewed-by:
Brett Creeley <brett.creeley@amd.com> Signed-off-by:
-
Shannon Nelson authored
Remove and restore the lif's debugfs pointers on a reset, and make sure to check for the dentry before removing it in case an earlier reset failed to rebuild the lif. Signed-off-by:
-
Shannon Nelson authored
When stopping the watchdog timer at remove time we should be using the new timer_shutdown_sync to assure the timer doesn't ever get rearmed. Signed-off-by:
-
Shannon Nelson authored
If there was a failed attempt to reset the PCI connection, don't later try to read from PCI as the space is unmapped and will cause a paging request crash. When clearing the PCI setup we can clear the dev_info register pointer, and check it before using it in the fw_running test. Signed-off-by:
-
