- 15 Apr, 2022 16 commits
-
-
Vadim Pasternak authored
Modular system supports additional cooling devices "mlxreg_fan1", "mlxreg_fan2", etcetera. Thermal zones in "mlxsw" driver should be bound to the same device as before called "mlxreg_fan". Used exact match for cooling device name to avoid binding to new additional cooling devices. Signed-off-by:
Vadim Pasternak <vadimp@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vadim Pasternak authored
Add prefix "lc#n" to thermal zones associated with the thermal objects found on line cards. For example thermal zone for module #9 located at line card #7 will have type: mlxsw-lc7-module9. And thermal zone for gearbox #3 located at line card #5 will have type: mlxsw-lc5-gearbox3. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Vadim Pasternak authored
Introduce intermediate level for thermal zones areas. Currently all thermal zones are associated with thermal objects located within the main board. Such objects are created during driver initialization and removed during driver de-initialization. For line cards in modular system the thermal zones are to be associated with the specific line card. They should be created whenever new line card is available (inserted, validated, powered and enabled) and removed, when line card is getting unavailable. The thermal objects found on the line card #n are accessed by setting slot index to #n, while for access to objects found on the main board slot index should be set to default value zero. Each thermal area contains the set of thermal zones associated with particular slot index. Thus introduction of thermal zone areas allows to use the same APIs for the main board and line cards, by adding slot index argument. Signed-off-by:
-
Vadim Pasternak authored
Add 'slot' parameter to 'mlxsw_hwmon_dev' structure. Use this parameter in mlxsw_reg_mtmp_pack(), mlxsw_reg_mtbr_pack(), mlxsw_reg_mgpir_pack() and mlxsw_reg_mtmp_slot_index_set() routines. For main board it'll always be zero, for line cards it'll be set to the physical slot number in modular systems. Signed-off-by:
-
Vadim Pasternak authored
Currently, mlxsw supports a single hwmon device and registers it with attributes corresponding to the various objects found on the main board such as fans and gearboxes. Line cards can have the same objects, but unlike the main board they can be added and removed while the system is running. The various hwmon objects found on these line cards should be created when the line card becomes available and destroyed when the line card becomes unavailable. The above can be achieved by representing each line card as a different hwmon device and registering / unregistering it when the line card becomes available / unavailable. Prepare for multi hwmon device support by splitting 'struct mlxsw_hwmon' into 'struct mlxsw_hwmon' and 'struct mlxsw_hwmon_dev'. The first will hold information relevant to all hwmon devices, whereas the second will hold per-hwmon device information. Signed-off-by:
-
Vadim Pasternak authored
Use a separate function for enablement of port module events such plug/unplug and temperature threshold crossing. The motivation is to reuse the function for line cards. Signed-off-by:
-
Vadim Pasternak authored
The port module core is tasked with module operations such as setting power mode policy and reset. The per-module information is currently stored in one large array suited for non-modular systems where only the main board is present (i.e., slot index 0). As a preparation for line cards support, allocate a per line card array according to the queried number of slots in the system. For each line card, allocate a module array according to the queried maximum number of modules per-slot. Signed-off-by:
-
Vadim Pasternak authored
Extend all cable info APIs with 'slot_index' argument. For main board, slot will always be set to zero and these APIs will work as before. If reading cable information is required from cages located on line cards, slot should be set to the physical slot number, where line card is located in modular systems. Signed-off-by:
-
Minghao Chi authored
Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by:
-
Minghao Chi authored
Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by:
-
Minghao Chi authored
Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by:
-
Paolo Abeni authored
In the most common setups, the geneve tunnels use an inner ethernet encapsulation. In the GRO path, when such condition is true, we can call directly the relevant GRO helper and avoid a few indirect calls. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
David S. Miller authored
Lorenzo Bianconi says: ==================== net: mvneta: add support for page_pool_get_stats Introduce page_pool stats ethtool APIs in order to avoid driver duplicated code. Changes since v4: - rebase on top of net-next Changes since v3: - get rid of wrong for loop in page_pool_ethtool_stats_get() - add API stubs when page_pool_stats are not compiled in Changes since v2: - remove enum list of page_pool stats in page_pool.h - remove leftover change in mvneta.c for ethtool_stats array allocation Changes since v1: - move stats accounting to page_pool code - move stats string management to page_pool code ==================== Signed-off-by: -
Lorenzo Bianconi authored
Introduce support for the page_pool stats API into mvneta driver. Report page_pool stats through ethtool. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Introduce page_pool APIs to report stats through ethtool and reduce duplicated code in each driver. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
-
-
- 14 Apr, 2022 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from wireless and netfilter. Current release - regressions: - smc: fix af_ops of child socket pointing to released memory - wifi: ath9k: fix usage of driver-private space in tx_info Previous releases - regressions: - ipv6: fix panic when forwarding a pkt with no in6 dev - sctp: use the correct skb for security_sctp_assoc_request - smc: fix NULL pointer dereference in smc_pnet_find_ib() - sched: fix initialization order when updating chain 0 head - phy: don't defer probe forever if PHY IRQ provider is missing - dsa: revert "net: dsa: setup master before ports" - dsa: felix: fix tagging protocol changes with multiple CPU ports - eth: ice: - fix use-after-free when freeing @rx_cpu_rmap - revert "iavf: fix deadlock occurrence during resetting VF interface" - eth: lan966x: stop processing the MAC entry is port is wrong Previous releases - always broken: - sched: - flower: fix parsing of ethertype following VLAN header - taprio: check if socket flags are valid - nfc: add flush_workqueue to prevent uaf - veth: ensure eth header is in skb's linear part - eth: stmmac: fix altr_tse_pcs function when using a fixed-link - eth: macb: restart tx only if queue pointer is lagging - eth: macvlan: fix leaking skb in source mode with nodst option" * tag 'net-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits) net: bcmgenet: Revert "Use stronger register read/writes to assure ordering" rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS replies net: dsa: felix: fix tagging protocol changes with multiple CPU ports tun: annotate access to queue->trans_start nfc: nci: add flush_workqueue to prevent uaf net: dsa: realtek: don't parse compatible string for RTL8366S net: dsa: realtek: fix Kconfig to assure consistent driver linkage net: ftgmac100: access hardware register after clock ready Revert "net: dsa: setup master before ports" macvlan: Fix leaking skb in source mode with nodst option netfilter: nf_tables: nft_parse_register can return a negative value net: lan966x: Stop processing the MAC entry is port is wrong. net: lan966x: Fix when a port's upper is changed. net: lan966x: Fix IGMP snooping when frames have vlan tag net: lan966x: Update lan966x_ptp_get_nominal_value sctp: Initialize daddr on peeled off socket net/smc: Fix af_ops of child socket pointing to released memory net/smc: Fix NULL pointer dereference in smc_pnet_find_ib() net/smc: use memcpy instead of snprintf to avoid out of bounds read net: macb: Restart tx only if queue pointer is lagging ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This became an unexpectedly large pull request due to various regression fixes in the previous kernels. The majority of fixes are a series of patches to address the regression at probe errors in devres'ed drivers, while there are yet more fixes for the x86 SG allocations and for USB-audio buffer management. In addition, a few HD-audio quirks and other small fixes are found" * tag 'sound-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (52 commits) ALSA: usb-audio: Limit max buffer and period sizes per time ALSA: memalloc: Add fallback SG-buffer allocations for x86 ALSA: nm256: Don't call card private_free at probe error path ALSA: mtpav: Don't call card private_free at probe error path ALSA: rme9652: Fix the missing snd_card_free() call at probe error ALSA: hdspm: Fix the missing snd_card_free() call at probe error ALSA: hdsp: Fix the missing snd_card_free() call at probe error ALSA: oxygen: Fix the missing snd_card_free() call at probe error ALSA: lx6464es: Fix the missing snd_card_free() call at probe error ALSA: cmipci: Fix the missing snd_card_free() call at probe error ALSA: aw2: Fix the missing snd_card_free() call at probe error ALSA: als300: Fix the missing snd_card_free() call at probe error ALSA: lola: Fix the missing snd_card_free() call at probe error ALSA: bt87x: Fix the missing snd_card_free() call at probe error ALSA: sis7019: Fix the missing error handling ALSA: intel_hdmi: Fix the missing snd_card_free() call at probe error ALSA: via82xx: Fix the missing snd_card_free() call at probe error ALSA: sonicvibes: Fix the missing snd_card_free() call at probe error ALSA: rme96: Fix the missing snd_card_free() call at probe error ALSA: rme32: Fix the missing snd_card_free() call at probe error ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A few more code and warning fixes. There's one feature ioctl removal patch slated for 5.18 that did not make it to the main pull request. It's just a one-liner and the ioctl has a v2 that's in use for a long time, no point to postpone it to 5.19. Late update: - remove balance v1 ioctl, superseded by v2 in 2012 Fixes: - add back cgroup attribution for compressed writes - add super block write start/end annotations to asynchronous balance - fix root reference count on an error handling path - in zoned mode, activate zone at the chunk allocation time to avoid ENOSPC due to timing issues - fix delayed allocation accounting for direct IO Warning fixes: - simplify assertion condition in zoned check - remove an unused variable" * tag 'for-5.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix btrfs_submit_compressed_write cgroup attribution btrfs: fix root ref counts in error handling in btrfs_get_root_ref btrfs: zoned: activate block group only for extent allocation btrfs: return allocated block group from do_chunk_alloc() btrfs: mark resumed async balance as writing btrfs: remove support of balance v1 ioctl btrfs: release correct delalloc amount in direct IO write path btrfs: remove unused variable in btrfs_{start,write}_dirty_block_groups() btrfs: zoned: remove redundant condition in btrfs_run_delalloc_range -
Linus Torvalds authored
Merge tag 'fscache-fixes-20220413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull fscache fixes from David Howells: "Here's a collection of fscache and cachefiles fixes and misc small cleanups. The two main fixes are: - Add a missing unmark of the inode in-use mark in an error path. - Fix a KASAN slab-out-of-bounds error when setting the xattr on a cachefiles volume due to the wrong length being given to memcpy(). In addition, there's the removal of an unused parameter, removal of an unused Kconfig option, conditionalising a bit of procfs-related stuff and some doc fixes" * tag 'fscache-fixes-20220413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: fscache: remove FSCACHE_OLD_API Kconfig option fscache: Use wrapper fscache_set_cache_state() directly when relinquishing fscache: Move fscache_cookies_seq_ops specific code under CONFIG_PROC_FS fscache: Remove the cookie parameter from fscache_clear_page_bits() docs: filesystems: caching/backend-api.rst: fix an object withdrawn API docs: filesystems: caching/backend-api.rst: correct two relinquish APIs use cachefiles: Fix KASAN slab-out-of-bounds in cachefiles_set_volume_xattr cachefiles: unmark inode in use in error path
-
Paolo Abeni authored
Lech Perczak says: ==================== rndis_host: handle bogus MAC addresses in ZTE RNDIS devices When porting support of ZTE MF286R to OpenWrt [1], it was discovered, that its built-in LTE modem fails to adjust its target MAC address, when a random MAC address is assigned to the interface, due to detection of "locally-administered address" bit. This leads to dropping of ingress trafficat the host. The modem uses RNDIS as its primary interface, with some variants exposing both of them simultaneously. Then it was discovered, that cdc_ether driver contains a fixup for that exact issue, also appearing on CDC ECM interfaces. I discussed how to proceed with that with Bjørn Mork at OpenWrt forum [3], with the first approach would be to trust the locally-administered MAC again, and add a quirk for the problematic ZTE devices, as suggested by Kristian Evensen. before [4], but reusing the fixup from cdc_ether looks like a safer and more generic solution. Finally, according to Bjørn's suggestion. limit the scope of bogus MAC addressdetection to ZTE devices, the same way as it is done in cdc_ether, as this trait wasn't really observed outside of ZTE devices. Do that for both flavours of RNDIS devices, with interface classes 02/02/ff and e0/01/03, as both types are reported by different modems. [1] https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=7ac8da00609f42b8aba74b7efc6b0d055b7cef3e [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=bfe9b9d2df669a57a95d641ed46eb018e204c6ce [3] https://forum.openwrt.org/t/problem-with-modem-in-zte-mf286r/120988 [4] https://lore.kernel.org/all/CAKfDRXhDp3heiD75Lat7cr1JmY-kaJ-MS0tt7QXX=s8RFjbpUQ@mail.gmail.com/T/ Cc: Bjørn Mork <bjorn@mork.no> Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> v3: Fixed wrong identifier commit description and whitespace in patch 2. v2: ensure that MAC fixup is applied to all Ethernet frames in RNDIS batch, by introducing a driver flag, and integrating the fixup inside rndis_rx_fixup(). ==================== Link: https://lore.kernel.org/r/20220413014416.2306843-1-lech.perczak@gmail.comSigned-off-by:
-
Lech Perczak authored
Reporting of bogus MAC addresses and ignoring configuration of new destination address wasn't observed outside of a range of ZTE devices, among which this seems to be the common bug. Align rndis_host driver with implementation found in cdc_ether, which also limits this workaround to ZTE devices. Suggested-by:
Bjørn Mork <bjorn@mork.no> Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by:
Lech Perczak <lech.perczak@gmail.com> Signed-off-by:
-
Lech Perczak authored
Certain ZTE modems, namely: MF823. MF831, MF910, built-in modem from MF286R, expose both CDC-ECM and RNDIS network interfaces. They have a trait of ignoring the locally-administered MAC address configured on the interface both in CDC-ECM and RNDIS part, and this leads to dropping of incoming traffic by the host. However, the workaround was only present in CDC-ECM, and MF286R explicitly requires it in RNDIS mode. Re-use the workaround in rndis_host as well, to fix operation of MF286R module, some versions of which expose only the RNDIS interface. Do so by introducing new flag, RNDIS_DRIVER_DATA_DST_MAC_FIXUP, and testing for it in rndis_rx_fixup. This is required, as RNDIS uses frame batching, and all of the packets inside the batch need the fixup. This might introduce a performance penalty, because test is done for every returned Ethernet frame. Apply the workaround to both "flavors" of RNDIS interfaces, as older ZTE modems, like MF823 found in the wild, report the USB_CLASS_COMM class interfaces, while MF286R reports USB_CLASS_WIRELESS_CONTROLLER. Suggested-by:
-
Lech Perczak authored
Commit bfe9b9d2 ("cdc_ether: Improve ZTE MF823/831/910 handling") introduces a workaround for certain ZTE modems reporting invalid MAC addresses over CDC-ECM. The same issue was present on their RNDIS interface,which was fixed in commit a5a18bdf ("rndis_host: Set valid random MAC on buggy devices"). However, internal modem of ZTE MF286R router, on its RNDIS interface, also exhibits a second issue fixed already in CDC-ECM, of the device not respecting configured random MAC address. In order to share the fixup for this with rndis_host driver, export the workaround function, which will be re-used in the following commit in rndis_host. Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Bjørn Mork <bjorn@mork.no> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Jeremy Linton authored
It turns out after digging deeper into this bug, that it was being triggered by GCC12 failing to call the bcmgenet_enable_dma() routine. Given that a gcc12 fix has been merged [1] and the genet driver now works properly when built with gcc12, this commit should be reverted. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160 https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=aabb9a261ef060cf24fd626713f1d7d9df81aa57 Fixes: 8d3ea3d4 ("net: bcmgenet: Use stronger register read/writes to assure ordering") Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220412210420.1129430-1-jeremy.linton@arm.comSigned-off-by:
-
Petr Machata authored
When L3 stats are disabled, rtnl_offload_xstats_get_size_stats() returns size of 0, which is supposed to be an indication that the corresponding attribute should not be emitted. However, instead, the current code reserves a 0-byte attribute. The reason this does not show up as a citation on a kasan kernel is that netdev_offload_xstats_get(), which is supposed to fill in the data, never ends up getting called, because rtnl_offload_xstats_get_stats() notices that the stats are not actually used and skips the call. Thus a zero-length IFLA_OFFLOAD_XSTATS_L3_STATS attribute ends up in a response, confusing the userspace. Fix by skipping the L3-stats related block in rtnl_offload_xstats_fill(). Fixes: 0e7788fd ("net: rtnetlink: Add UAPI for obtaining L3 offload xstats") Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
-
Vladimir Oltean authored
When the device tree has 2 CPU ports defined, a single one is active (has any dp->cpu_dp pointers point to it). Yet the second one is still a CPU port, and DSA still calls ->change_tag_protocol on it. On the NXP LS1028A, the CPU ports are ports 4 and 5. Port 4 is the active CPU port and port 5 is inactive. After the following commands: # Initial setting cat /sys/class/net/eno2/dsa/tagging ocelot echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo ocelot > /sys/class/net/eno2/dsa/tagging traffic is now broken, because the driver has moved the NPI port from port 4 to port 5, unbeknown to DSA. The problem can be avoided by detecting that the second CPU port is unused, and not doing anything for it. Further rework will be needed when proper support for multiple CPU ports is added. Treat this as a bug and prepare current kernels to work in single-CPU mode with multiple-CPU DT blobs. Fixes: adb3dccf ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220412172209.2531865-1-vladimir.oltean@nxp.comSigned-off-by:
-
Antoine Tenart authored
Commit 5337824f ("net: annotate accesses to queue->trans_start") introduced a new helper, txq_trans_cond_update, to update queue->trans_start using WRITE_ONCE. One snippet in drivers/net/tun.c was missed, as it was introduced roughly at the same time. Fixes: 5337824f ("net: annotate accesses to queue->trans_start") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Antoine Tenart <atenart@kernel.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220412135852.466386-1-atenart@kernel.orgSigned-off-by:
-
- 13 Apr, 2022 12 commits
-
-
Lin Ma authored
Our detector found a concurrent use-after-free bug when detaching an NCI device. The main reason for this bug is the unexpected scheduling between the used delayed mechanism (timer and workqueue). The race can be demonstrated below: Thread-1 Thread-2 | nci_dev_up() | nci_open_device() | __nci_request(nci_reset_req) | nci_send_cmd | queue_work(cmd_work) nci_unregister_device() | nci_close_device() | ... del_timer_sync(cmd_timer)[1] | ... | Worker nci_free_device() | nci_cmd_work() kfree(ndev)[3] | mod_timer(cmd_timer)[2] In short, the cleanup routine thought that the cmd_timer has already been detached by [1] but the mod_timer can re-attach the timer [2], even it is already released [3], resulting in UAF. This UAF is easy to trigger, crash trace by POC is like below [ 66.703713] ================================================================== [ 66.703974] BUG: KASAN: use-after-free in enqueue_timer+0x448/0x490 [ 66.703974] Write of size 8 at addr ffff888009fb7058 by task kworker/u4:1/33 [ 66.703974] [ 66.703974] CPU: 1 PID: 33 Comm: kworker/u4:1 Not tainted 5.18.0-rc2 #5 [ 66.703974] Workqueue: nfc2_nci_cmd_wq nci_cmd_work [ 66.703974] Call Trace: [ 66.703974] <TASK> [ 66.703974] dump_stack_lvl+0x57/0x7d [ 66.703974] print_report.cold+0x5e/0x5db [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] kasan_report+0xbe/0x1c0 [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] enqueue_timer+0x448/0x490 [ 66.703974] __mod_timer+0x5e6/0xb80 [ 66.703974] ? mark_held_locks+0x9e/0xe0 [ 66.703974] ? try_to_del_timer_sync+0xf0/0xf0 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x17b/0x410 [ 66.703974] ? queue_work_on+0x61/0x80 [ 66.703974] ? lockdep_hardirqs_on+0xbf/0x130 [ 66.703974] process_one_work+0x8bb/0x1510 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 66.703974] ? pwq_dec_nr_in_flight+0x230/0x230 [ 66.703974] ? rwlock_bug.part.0+0x90/0x90 [ 66.703974] ? _raw_spin_lock_irq+0x41/0x50 [ 66.703974] worker_thread+0x575/0x1190 [ 66.703974] ? process_one_work+0x1510/0x1510 [ 66.703974] kthread+0x2a0/0x340 [ 66.703974] ? kthread_complete_and_exit+0x20/0x20 [ 66.703974] ret_from_fork+0x22/0x30 [ 66.703974] </TASK> [ 66.703974] [ 66.703974] Allocated by task 267: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] __kasan_kmalloc+0x81/0xa0 [ 66.703974] nci_allocate_device+0xd3/0x390 [ 66.703974] nfcmrvl_nci_register_dev+0x183/0x2c0 [ 66.703974] nfcmrvl_nci_uart_open+0xf2/0x1dd [ 66.703974] nci_uart_tty_ioctl+0x2c3/0x4a0 [ 66.703974] tty_ioctl+0x764/0x1310 [ 66.703974] __x64_sys_ioctl+0x122/0x190 [ 66.703974] do_syscall_64+0x3b/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 66.703974] [ 66.703974] Freed by task 406: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] kasan_set_track+0x21/0x30 [ 66.703974] kasan_set_free_info+0x20/0x30 [ 66.703974] __kasan_slab_free+0x108/0x170 [ 66.703974] kfree+0xb0/0x330 [ 66.703974] nfcmrvl_nci_unregister_dev+0x90/0xd0 [ 66.703974] nci_uart_tty_close+0xdf/0x180 [ 66.703974] tty_ldisc_kill+0x73/0x110 [ 66.703974] tty_ldisc_hangup+0x281/0x5b0 [ 66.703974] __tty_hangup.part.0+0x431/0x890 [ 66.703974] tty_release+0x3a8/0xc80 [ 66.703974] __fput+0x1f0/0x8c0 [ 66.703974] task_work_run+0xc9/0x170 [ 66.703974] exit_to_user_mode_prepare+0x194/0x1a0 [ 66.703974] syscall_exit_to_user_mode+0x19/0x50 [ 66.703974] do_syscall_64+0x48/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0xae To fix the UAF, this patch adds flush_workqueue() to ensure the nci_cmd_work is finished before the following del_timer_sync. This combination will promise the timer is actually detached. Fixes: 6a2968aa ("NFC: basic NCI protocol implementation") Signed-off-by:Lin Ma <linma@zju.edu.cn> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Alvin Šipraga authored
This switch is not even supported, but if someone were to actually put this compatible string "realtek,rtl8366s" in their device tree, they would be greeted with a kernel panic because the probe function would dereference NULL. So let's just remove it. Link: https://lore.kernel.org/all/CACRpkdYdKZs0WExXc3=0yPNOwP+oOV60HRz7SRoGjZvYHaT=1g@mail.gmail.com/Signed-off-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by:
-
Alvin Šipraga authored
The kernel test robot reported a build failure: or1k-linux-ld: drivers/net/dsa/realtek/realtek-smi.o:(.rodata+0x16c): undefined reference to `rtl8366rb_variant' ... with the following build configuration: CONFIG_NET_DSA_REALTEK=y CONFIG_NET_DSA_REALTEK_SMI=y CONFIG_NET_DSA_REALTEK_RTL8365MB=y CONFIG_NET_DSA_REALTEK_RTL8366RB=m The problem here is that the realtek-smi interface driver gets built-in, while the rtl8366rb switch subdriver gets built as a module, hence the symbol rtl8366rb_variant is not reachable when defining the OF device table in the interface driver. The Kconfig dependencies don't help in this scenario because they just say that the subdriver(s) depend on at least one interface driver. In fact, the subdrivers don't depend on the interface drivers at all, and can even be built even in their absence. Somewhat strangely, the interface drivers can also be built in the absence of any subdriver, BUT, if a subdriver IS enabled, then it must be reachable according to the linkage of the interface driver: effectively what the IS_REACHABLE() macro achieves. If it is not reachable, the above kind of linker error will be observed. Rather than papering over the above build error by simply using IS_REACHABLE(), we can do a little better and admit that it is actually the interface drivers that have a dependency on the subdrivers. So this patch does exactly that. Specifically, we ensure that: 1. The interface drivers' Kconfig symbols must have a value no greater than the value of any subdriver Kconfig symbols. 2. The subdrivers should by default enable both interface drivers, since most users probably want at least one of them; those interface drivers can be explicitly disabled however. What this doesn't do is prevent a user from building only a subdriver, without any interface driver. To that end, add an additional line of help in the menu to guide users in the right direction. Link: https://lore.kernel.org/all/202204110757.XIafvVnj-lkp@intel.com/Reported-by:
kernel test robot <lkp@intel.com> Fixes: aac94001 ("net: dsa: realtek: add new mdio interface for drivers") Signed-off-by:
-
Dylan Muller authored
Previously it was not possible to determine which code path was responsible for generating a certain message after a call to the nfp_X messaging definitions for cases of duplicate strings. We therefore modify nfp_err, nfp_warn, nfp_info, nfp_dbg and nfp_printk to print the corresponding file and line number where the nfp_X definition is used. Signed-off-by:
Dylan Muller <dylan.muller@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessDavid S. Miller authored
Kalle Valo says: ==================== wireless fixes for v5.18 First set of fixes for v5.18. Maintainers file updates, two compilation warning fixes, one revert for ath11k and smaller fixes to drivers and stack. All the usual stuff. ==================== Signed-off-by: -
David S. Miller authored
Menglong Dong says: ==================== net: ip: add skb drop reasons to ip ingress In the series "net: use kfree_skb_reason() for ip/udp packet receive", skb drop reasons are added to the basic ingress path of IPv4. And in the series "net: use kfree_skb_reason() for ip/neighbour", the egress paths of IPv4 and IPv6 are handled. Related links: https://lore.kernel.org/netdev/20220205074739.543606-1-imagedong@tencent.com/ https://lore.kernel.org/netdev/20220226041831.2058437-1-imagedong@tencent.com/ Seems we still have a lot work to do with IP layer, including IPv6 basic ingress path, IPv4/IPv6 forwarding, IPv6 exthdrs, fragment and defrag, etc. In this series, skb drop reasons are added to the basic ingress path of IPv6 protocol and IPv4/IPv6 packet forwarding. Following functions, which are used for IPv6 packet receiving are handled: ip6_pkt_drop() ip6_rcv_core() ip6_protocol_deliver_rcu() And following functions that used for IPv6 TLV parse are handled: ip6_parse_tlv() ipv6_hop_ra() ipv6_hop_ioam() ipv6_hop_jumbo() ipv6_hop_calipso() ipv6_dest_hao() Besides, ip_forward() and ip6_forward(), which are used for IPv4/IPv6 forwarding, are also handled. And following new drop reasons are added: /* host unreachable, corresponding to IPSTATS_MIB_INADDRERRORS */ SKB_DROP_REASON_IP_INADDRERRORS /* network unreachable, corresponding to IPSTATS_MIB_INADDRERRORS */ SKB_DROP_REASON_IP_INNOROUTES /* packet size is too big, corresponding to * IPSTATS_MIB_INTOOBIGERRORS */ SKB_DROP_REASON_PKT_TOO_BIG In order to simply the definition and assignment for 'enum skb_drop_reason', some helper functions are introduced in the 1th patch. I'm not such if this is necessary, but it makes the code simpler. For example, we can replace the code: if (reason == SKB_DROP_REASON_NOT_SPECIFIED) reason = SKB_DROP_REASON_IP_INHDR; with: SKB_DR_OR(reason, IP_INHDR); In the 6th patch, the statistics for skb in ipv6_hop_jum() is removed, as I think it is redundant. There are two call chains for ipv6_hop_jumbo(). The first one is: ipv6_destopt_rcv() -> ip6_parse_tlv() -> ipv6_hop_jumbo() On this call chain, the drop statistics will be done in ipv6_destopt_rcv() with 'IPSTATS_MIB_INHDRERRORS' if ipv6_hop_jumbo() returns false. The second call chain is: ip6_rcv_core() -> ipv6_parse_hopopts() -> ip6_parse_tlv() And the drop statistics will also be done in ip6_rcv_core() with 'IPSTATS_MIB_INHDRERRORS' if ipv6_hop_jumbo() returns false. Therefore, the statistics in ipv6_hop_jumbo() is redundant, which means the drop is counted twice. The statistics in ipv6_hop_jumbo() is almost the same as the outside, except the 'IPSTATS_MIB_INTRUNCATEDPKTS', which seems that we have to ignore it. ====================================================================== Here is a basic test for IPv6 forwarding packet drop that monitored by 'dropwatch' tool: drop at: ip6_forward+0x81a/0xb70 (0xffffffff86c73f8a) origin: software input port ifindex: 7 timestamp: Wed Apr 13 11:51:06 2022 130010176 nsec protocol: 0x86dd length: 94 original length: 94 drop reason: IP_INADDRERRORS The origin cause of this case is that IPv6 doesn't allow to forward the packet with LOCAL-LINK saddr, and results the 'IP_INADDRERRORS' drop reason. ==================== Signed-off-by:
-
Menglong Dong authored
Replace kfree_skb() used in ip6_protocol_deliver_rcu() with kfree_skb_reason(). No new reasons are added. Some paths are ignored, as they are not common, such as encapsulation on non-final protocol. Signed-off-by:
Menglong Dong <imagedong@tencent.com> Reviewed-by:
Jiang Biao <benbjiang@tencent.com> Reviewed-by:
Hao Peng <flyingpeng@tencent.com> Signed-off-by:
-
Menglong Dong authored
Replace kfree_skb() used in ip6_rcv_core() with kfree_skb_reason(). No new drop reasons are added. Seems now we use 'SKB_DROP_REASON_IP_INHDR' for too many case during ipv6 header parse or check, just like what 'IPSTATS_MIB_INHDRERRORS' do. Will it be too general and hard to know what happened? Signed-off-by:
-
Menglong Dong authored
Replace kfree_skb() used in TLV encoded option header parsing with kfree_skb_reason(). Following functions are involved: ip6_parse_tlv() ipv6_hop_ra() ipv6_hop_ioam() ipv6_hop_jumbo() ipv6_hop_calipso() ipv6_dest_hao() Most skb drops during this process are regarded as 'InHdrErrors', as 'IPSTATS_MIB_INHDRERRORS' is used when ip6_parse_tlv() fails, which make we use 'SKB_DROP_REASON_IP_INHDR' correspondingly. However, 'IP_INHDR' is a relatively general reason. Therefore, we can use other reasons with higher priority in some cases. For example, 'SKB_DROP_REASON_UNHANDLED_PROTO' is used for unknown TLV options. Signed-off-by:
-
Menglong Dong authored
There are two call chains for ipv6_hop_jumbo(). The first one is: ipv6_destopt_rcv() -> ip6_parse_tlv() -> ipv6_hop_jumbo() On this call chain, the drop statistics will be done in ipv6_destopt_rcv() with 'IPSTATS_MIB_INHDRERRORS' if ipv6_hop_jumbo() returns false. The second call chain is: ip6_rcv_core() -> ipv6_parse_hopopts() -> ip6_parse_tlv() And the drop statistics will also be done in ip6_rcv_core() with 'IPSTATS_MIB_INHDRERRORS' if ipv6_hop_jumbo() returns false. Therefore, the statistics in ipv6_hop_jumbo() is redundant, which means the drop is counted twice. The statistics in ipv6_hop_jumbo() is almost the same as the outside, except the 'IPSTATS_MIB_INTRUNCATEDPKTS', which seems that we have to ignore it. Signed-off-by:
-
Menglong Dong authored
In order to add the skb drop reasons support to icmpv6_param_prob(), introduce the function icmpv6_param_prob_reason() and make icmpv6_param_prob() an inline call to it. This new function will be used in the following patches. Signed-off-by:
-
Menglong Dong authored
Replace kfree_skb() which is used in ip6_forward() and ip_forward() with kfree_skb_reason(). The new drop reason 'SKB_DROP_REASON_PKT_TOO_BIG' is introduced for the case that the length of the packet exceeds MTU and can't fragment. Signed-off-by:
-
