- 23 Mar, 2017 15 commits
-
-
Oscar Mateo authored
The GuC descriptor is big in size. If we use a local definition of guc_desc we have a chance to overflow stack, so avoid it. Also, Chris abhors scatterlists :) v2: Rebased, helper function to retrieve the context descriptor, s/ctx_pool_vma/ctx_pool/ v3: Zero out guc_context_desc before initialization v4: Do not do arithmetic on void pointers (Daniele) v5: Nicer than arithmetic on pointers (Chris, Joonas) Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Joonas Lahtinen authored
Started adding proper teardown to guc_client_alloc, ended up removing quite a few dead ends where errors communicating with the GuC were silently ignored. There also seemed to be quite a few erronous teardown actions performed in case of an error (ordering wrong). v2: - Increase function symmetry/proximity (Michal/Daniele) - Fix __reserve_doorbell accounting for high priority (Daniele) - Call __update_doorbell_desc! (Daniele) - Isolate __guc_{,de}allocate_doorbell (Michal/Daniele) v3: - "Select" a cacheline is a more accurate verb than "reserve" (Daniele). - We cannot update & create the doorbell without reserving it first, so move the whole doorbell creation for execbuf_client to the submission enable (Oscar).i - Add a fixme for ignoring possible doorbell destroy errors. v4: - Remove comment about is_high_priority (Daniele) - Debug message typo (Daniele) - Reuse __get_doorbell in more places (Daniele) - Do not do arithmetic on void pointers (Daniele) - Add comment to __reset_doorbell (Daniele) v5: - gccisms like arithmetic on void pointers are not frowned upon (Oscar) Signed-off-by:Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
-
Chris Wilson authored
Ensure that before we overwrite the reservation_object with our exclusive fence for the pending clflush operation, that we do wait upon all the fences in the current reservation_object. Fixes: 57822dc6 ("drm/i915: Perform object clflushing asynchronously") Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com>
-
Chris Wilson authored
The set of available structs is not protected by the spinlock, and for the single read we can use READ_ONCE instead. Signed-off-by:
-
Chris Wilson authored
Since we reuse the same values for each fw_domain, move them onto uncore. Signed-off-by:
-
Chris Wilson authored
We can relax the requirement upon ourselves that the forcewake is released immediately and just allow it to occur naturally following our mmio request. Signed-off-by:
-
Chris Wilson authored
Use find-first-set bitop to quickly scan through the fw_domains mask and skip iterating over unused domains. v2: Move the WARN into the caller, to prevent compiler warnings in normal builds. Signed-off-by:
-
Chris Wilson authored
In the next patch we will begin to sanity check that we do not attempt to obtain the forcewake on an unsupport domain. However, that is exactly what we do during reset of the fw_domains - rectify it before it explodes. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
In the next patch we will begin to sanity check that we do not attempt to obtain the forcewake on an unsupport domain. However, that is exactly what we do during our actual initialisation of fw_domains - rectify it before it explodes. Signed-off-by:
-
Chris Wilson authored
Pass along the drm_i915_private pointer from the caller, rather than looking it up from each fw_domain during fw_domains_get/_put. This allows us to then eliminate the backpointer, in exchange for a more complicated unwrapping procedure in the rare intel_uncore_fw_release_timer(). Signed-off-by:
-
Chris Wilson authored
Commit e8a9c58f ("drm/i915: Unify active context tracking between legacy/execlists/guc") converted the legacy intel_ringbuffer submission to the same context pinning mechanism as execlists - that is to pin the context until the subsequent request is retired. Previously it used the vma retirement of the context object to keep itself pinned until the next request (after i915_vma_move_to_active()). In the conversion, I missed that the vma retirement was also responsible for marking the object as dirty. Mark the context object as dirty when pinning (equivalent to execlists) which ensures that if the context is swapped out due to mempressure or suspend/hibernation, when it is loaded back in it does so with the previous state (and not all zero). Fixes: e8a9c58f ("drm/i915: Unify active context tracking between legacy/execlists/guc") Reported-by:
Dennis Gilmore <dennis@ausil.us> Reported-by:
Mathieu Marquer <mathieu.marquer@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99993 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100181Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Chris Wilson authored
Why have both hw_flags and flags, when just one will do? Signed-off-by:
-
Chris Wilson authored
Words cannot describe the embarrassment at creating a new gfp_t relaim to only prevent the oomkiller but allow direct|kswapd reclaim, and then not use it in the shmem_read_mapping_page_gfp(). Fixes: 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") Signed-off-by:
-
Daniel Vetter authored
Backmerge drm-next to get at the hdmi2.0 helper functions. Signed-off-by:Daniel Vetter <daniel.vetter@intel.com>
-
Dave Airlie authored
Linux 4.11-rc3 as requested by Daniel
-
- 22 Mar, 2017 8 commits
-
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
drm-misc for 4.12, 2nd attempt this week: - topic branch from Jon Corbet for the new graph kerneldoc support - lots of graphs for kms/atomic things using the above - some vblank query tuning from Chris - gem/cma_fops macros - moar docs Driver stuff: - vc4 hdmi audio, yay (Eric) - dw-hdmi polish from a bunch of people - some rockchip dp updates that didn't make last week (Chris Zhong) - misc bridge&driver updates * tag 'drm-misc-next-2017-03-21' of git://anongit.freedesktop.org/git/drm-misc: (37 commits) drm/edid: detect SCDC support in HF-VSDB drm/edid: detect SCDC support in HF-VSDB drm/edid: check for HF-VSDB block drm: Add SCDC helpers drm: bridge: dw-hdmi: add HDMI vendor specific infoframe config drm/bridge: dw_hdmi: support i2c extended read mode drm/msm: add stubs for msm_{perf,rd}_debugfs_cleanup drm: bochs: Don't remove uninitialized fbdev framebuffer drm: vc4: remove redundant check of plane being non-null drm/vc4: use platform_register_drivers dma-fence: add dma_fence_match_context helper drm/vc4: Add HDMI audio support dt-bindings: Document the dmas and dma-names properties for VC4 HDMI drm/atmel-hlcdc: Fix suspend/resume implementation drm: Skip the waitqueue setup for vblank queries drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off) drm/doc: atomic overview, with graph drm/doc: diagram for mode objects and properties drm/doc: Consistent kerneldoc include order drm/doc: Add KMS overview graphs ...
-
git://anongit.freedesktop.org/git/drm-intelDave Airlie authored
More in i915 for 4.12: - designware i2c fixes from Hans de Goede, in a topic branch shared with other subsystems (maybe, they didn't confirm, but requested the pull) - drop drm_panel usage from the intel dsi vbt panel (Jani) - vblank evasion improvements and tracing (Maarten and Ville) - clarify spinlock irq semantics again a bit (Tvrtko) - new ->pwrite backend hook (right now just for shmem pageche writes), from Chris - more planar/ccs work from Ville - hotplug safe connector iterators everywhere - userptr fixes (Chris) - selftests for cache coloring eviction (Matthew Auld) - extend debugfs drop_caches interface for shrinker testing (Chris) - baytrail "the rps kills the machine" fix (Chris) - use new atomic state iterators, a lot (Maarten) - refactor guc/huc code some (Arkadiusz Hiler) - tighten breadcrumbs rbtree a bit (Chris) - improve wrap-around and time handling in rps residency counters (Mika) - split reset-in-progress in two flags, backoff and handoff (Chris) - other misc reset improvements from a few people - bunch of vgpu interaction fixes with recent code changes - misc stuff all over, as usual * tag 'drm-intel-next-2017-03-20' of git://anongit.freedesktop.org/git/drm-intel: (144 commits) drm/i915: Update DRIVER_DATE to 20170320 drm/i915: Initialise i915_gem_object_create_from_data() directly drm/i915: Correct error handling for i915_gem_object_create_from_data() drm/i915: i915_gem_object_create_from_data() doesn't require struct_mutex drm/i915: Retire an active batch pool object rather than allocate new drm/i915: Add i810/i815 pci-ids for completeness drm/i915: Skip execlists_dequeue() early if the list is empty drm/i915: Stop using obj->obj_exec_link outside of execbuf drm/i915: Squelch WARN for VLV_COUNTER_CONTROL drm/i915/glk: Enable pooled EUs for Geminilake drm/i915: Remove superfluous i915_add_request_no_flush() helper drm/i915/vgpu: Neuter forcewakes for VGPU more thoroughly drm/i915: Fix vGPU balloon for ggtt guard page drm/i915: Avoid use-after-free of ctx in request tracepoints drm/i915: Assert that the context pin_counts do not overflow drm/i915: Wait for reset to complete before returning from debugfs/i915_wedged drm/i915: Restore engine->submit_request before unwedging drm/i915: Move engine->submit_request selection to a vfunc drm/i915: Split I915_RESET_IN_PROGRESS into two flags drm/i915: make context status notifier head be per engine ...
-
Ville Syrjälä authored
Use intel_wm_plane_visible() to determine cursor visibility for SKL+ also. Previously SKL+ would check the actual visibility which now conflicts with the assumptions in intel_legacy_cursor_update(). We also change SKL+ to compute the cursor watermarks based on the unclipped cursor size, just as we do on all the other platforms. Using the clipped size could now result in garbage results. Testcase: igt/kms_chv_cursor_fail Fixes: a5509abd ("drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100195Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170314151050.12194-2-ville.syrjala@linux.intel.comTested-by:
Dorota Czaplejewicz <dorota.czaplejewicz@collabora.co.uk> Tested-by:
Jari Tahvanainen <jari.tahvanainen@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com>
-
Ville Syrjälä authored
All platforms that lack double buffered watermarks will need to handle the legacy cursor updates in the same way. So let's extract the logic to determine the plane visibility into a small helper. For simplicity we'll make the function DTRT for any plane, but only apply the special sauce for cursor planes. Signed-off-by:
-
Chris Wilson authored
Since gfx allocations tend to be large, unmovable and disposable, report the allocation failure back to userspace as an ENOMEM rather than incur the oomkiller. We have already tried to make room by purging our own cached gfx objects, and the oomkiller doesn't attribute ownership of gfx objects so will likely pick the wrong candidate. Instead, let userspace see the ENOMEM. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Because {hsw,skl,bxt}_ddi_pll_select all pretty much do the same thing in slightly different ways. Replace everything with a simple copy of the function and inline it inside intle_ddi_pll_select(). v2: s/return pll/return pll != NULL/ (Ville) Reviewed-by:Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1490209125-20046-1-git-send-email-paulo.r.zanoni@intel.com
-
Pandiyan, Dhinakaran authored
According to BSpec, "The CD clock frequency must be at least twice the frequency of the Azalia BCLK." and BCLK is configured to 96 MHz by default. This check is needed because BXT and GLK support cdclk frequencies less than 192 MHz. v2: Include other Gen9 platforms too for completeness.(Paulo) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
Pandiyan, Dhinakaran authored
Implement the DP-Audio cdclk restriction for GLK, similar to what is implemented for BDW and other GEN9 platforms. The max. pixel clock adjustment for GLK, however factors in the 2 pixels per clock output that GLK generates. Separating min. cdclk and max. pixel_rate would be nicer, but let's defer that to future and fix the GLK bug for now. Signed-off-by:
-
- 21 Mar, 2017 13 commits
-
-
Tvrtko Ursulin authored
The tasklets callbacks are only called from tasklet context so it is safe do to this. Signed-off-by:
-
Chris Wilson authored
Storing the position of the breadcrumb of the last retired request as a separate last_retired_head is superfluous as we always copy that into head prior to recalculation of the intel_ring.space. Signed-off-by:
-
Chris Wilson authored
Rather than impose the cost of a locked test before queuing a new request, reduce it to a simple test_bit() with a following clear_bit() prior to doing the CSB check. This ensure that if an interrupt does occur whilst reading from the CSB, we still detect it (the interrupt would trigger a rescheduling of the tasklet anyway). Signed-off-by:
-
Arnd Bergmann authored
We get a warning with gcc-7 about a pointless comparison when using a linear memmap: drivers/gpu/drm/i915/selftests/scatterlist.c: In function 'alloc_table': drivers/gpu/drm/i915/selftests/scatterlist.c:219:66: error: self-comparison always evaluates to false [-Werror=tautological-compare] Splitting out the comparison into a separate function avoids the warning and makes it slightly more obvious what happens. Fixes: 935a2f77 ("drm/i915: Add some selftests for sg_table manipulation") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: http://patchwork.freedesktop.org/patch/msgid/20170320094335.1266306-2-arnd@arndb.deReviewed-by:
-
Chris Wilson authored
As intel_engine_init_global_seqno() may be called by nop_submit_request() from inside irq context, we have to use atomic versions of kmap/kunmap. This is rare as this requires using gen8 legacy ringbuffer submission. Reported-by:
-
Chris Wilson authored
intel_engine_wakeup() is called by nop_request_submit() which is installed to handle third party fences completed from within irq context. As such, it needs the full irqsave/irqrestore and not the partial spin_irq_lock handling. [18942.714467] ================================= [18942.719076] [ INFO: inconsistent lock state ] [18942.723522] 4.11.0-rc2-CI-CI_DRM_2368+ #1 Tainted: G U W [18942.729970] --------------------------------- [18942.734466] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [18942.740594] gem_eio/1275 [HC0[0]:SC0[0]:HE1:SE1] takes: [18942.745932] (&(&fence->lock)->rlock){+.?...}, at: [<ffffffff815ec100>] dma_fence_signal+0x100/0x 230 [18942.755331] {IN-SOFTIRQ-W} state was registered at: [18942.760356] __lock_acquire+0x5d0/0x1bb0 [18942.764444] lock_acquire+0xc9/0x220 [18942.768196] _raw_spin_lock_irqsave+0x41/0x60 [18942.772747] dma_fence_signal+0x100/0x230 [18942.776927] vgem_fence_timeout+0x9/0x10 [vgem] [18942.781701] call_timer_fn+0x92/0x380 [18942.785557] expire_timers+0x150/0x1f0 [18942.789491] run_timer_softirq+0x7c/0x160 [18942.793705] __do_softirq+0x116/0x4c0 [18942.797560] irq_exit+0xa9/0xc0 [18942.800873] smp_apic_timer_interrupt+0x38/0x50 [18942.805611] apic_timer_interrupt+0x90/0xa0 [18942.810008] cpuidle_enter_state+0x135/0x380 [18942.814503] cpuidle_enter+0x12/0x20 [18942.818250] call_cpuidle+0x1e/0x40 [18942.821906] do_idle+0x17e/0x1f0 [18942.825333] cpu_startup_entry+0x18/0x20 [18942.829463] rest_init+0x127/0x130 [18942.833025] start_kernel+0x3f1/0x3fe [18942.836908] x86_64_start_reservations+0x2a/0x2c [18942.841733] x86_64_start_kernel+0x173/0x186 [18942.846234] verify_cpu+0x0/0xfc [18942.849604] irq event stamp: 30568 [18942.853140] hardirqs last enabled at (30567): [<ffffffff8110b81f>] ktime_get+0xef/0x120 [18942.861468] hardirqs last disabled at (30568): [<ffffffff81876377>] _raw_spin_lock_irqsave+0x17/0 x60 [18942.870812] softirqs last enabled at (30462): [<ffffffff81085cd9>] __do_softirq+0x1d9/0x4c0 [18942.879443] softirqs last disabled at (30439): [<ffffffff81086139>] irq_exit+0xa9/0xc0 [18942.887616] [18942.887616] other info that might help us debug this: [18942.894279] Possible unsafe locking scenario: [18942.894279] [18942.900336] CPU0 [18942.902851] ---- [18942.905362] lock(&(&fence->lock)->rlock); [18942.909647] <Interrupt> [18942.912330] lock(&(&fence->lock)->rlock); [18942.916821] [18942.916821] *** DEADLOCK *** [18942.916821] [18942.922862] 1 lock held by gem_eio/1275: [18942.926859] #0: (&(&fence->lock)->rlock){+.?...}, at: [<ffffffff815ec100>] dma_fence_signal+0x1 00/0x230 [18942.936651] [18942.936651] stack backtrace: [18942.941142] CPU: 3 PID: 1275 Comm: gem_eio Tainted: G U W 4.11.0-rc2-CI-CI_DRM_2368+ # 1 [18942.950367] Hardware name: Gigabyte Technology Co., Ltd. Z170X-UD5/Z170X-UD5-CF, BIOS F21 01/06/2 017 [18942.959756] Call Trace: [18942.962244] dump_stack+0x67/0x92 [18942.965626] print_usage_bug.part.23+0x259/0x268 [18942.970362] mark_lock+0x12c/0x6f0 [18942.973851] ? check_usage_forwards+0x130/0x130 [18942.978487] mark_held_locks+0x6f/0xa0 [18942.982329] ? _raw_spin_unlock_irq+0x27/0x50 [18942.986797] trace_hardirqs_on_caller+0x150/0x200 [18942.991599] trace_hardirqs_on+0xd/0x10 [18942.995515] _raw_spin_unlock_irq+0x27/0x50 [18942.999796] intel_engine_wakeup+0x26/0x30 [i915] [18943.004670] intel_engine_init_global_seqno+0x131/0x1a0 [i915] [18943.010745] nop_submit_request+0x2e/0x40 [i915] [18943.015476] submit_notify+0x3f/0x5c [i915] [18943.019763] __i915_sw_fence_complete+0x176/0x220 [i915] [18943.025234] ? try_to_del_timer_sync+0x4d/0x60 [18943.029825] i915_sw_fence_complete+0x25/0x40 [i915] [18943.034887] dma_i915_sw_fence_wake+0x26/0x60 [i915] [18943.039959] dma_fence_signal+0x146/0x230 [18943.044109] vgem_fence_signal_ioctl+0x6c/0xc0 [vgem] [18943.049275] drm_ioctl+0x200/0x450 [18943.052758] ? vgem_fence_attach_ioctl+0x270/0x270 [vgem] [18943.058334] do_vfs_ioctl+0x90/0x6e0 [18943.061991] ? entry_SYSCALL_64_fastpath+0x5/0xb1 [18943.066843] ? __this_cpu_preempt_check+0x13/0x20 [18943.071643] ? trace_hardirqs_on_caller+0xe7/0x200 [18943.076532] SyS_ioctl+0x3c/0x70 [18943.079842] entry_SYSCALL_64_fastpath+0x1c/0xb1 [18943.084558] RIP: 0033:0x7f0dfcc14357 [18943.088240] RSP: 002b:00007ffeb4628da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [18943.095996] RAX: ffffffffffffffda RBX: ffffffff8147eb93 RCX: 00007f0dfcc14357 [18943.103311] RDX: 00007ffeb4628de0 RSI: 0000000040086442 RDI: 0000000000000005 [18943.110574] RBP: ffffc9000176ff88 R08: 0000000000000004 R09: 0000000000000000 [18943.117845] R10: 0000000000000029 R11: 0000000000000246 R12: 0000000000000001 [18943.125168] R13: 0000000000000005 R14: 0000000040086442 R15: 0000000000000000 [18943.132520] ? __this_cpu_preempt_check+0x13/0x20 Fixes: cdc3a453 ("drm/i915: No need to save/restore irq status in intel_engine_wakeup") Signed-off-by: -
Tvrtko Ursulin authored
It has to be called after the global seqno has been assigned. Signed-off-by:
-
Shashank Sharma authored
This patch does following: - Adds a new structure (drm_hdmi_info) in drm_display_info. This structure will be used to save and indicate if sink supports advanced HDMI 2.0 features - Adds another structure drm_scdc within drm_hdmi_info, to reflect scdc support and capabilities in connected HDMI 2.0 sink. - Checks the HF-VSDB block for presence of SCDC, and marks it in scdc structure - If SCDC is present, checks if sink is capable of generating SCDC read request, and marks it in scdc structure. V2: Addressed review comments Thierry: - Fix typos in commit message and make abbreviation consistent across the commit message. - Change structure object name from hdmi_info -> hdmi - Fix typos and abbreviations in description of structure drm_hdmi_info end the description with a full stop. - Create a structure drm_scdc, and keep all information related to SCDC register set (supported, read request supported) etc in it. Ville: - Change rr -> read_request - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all of HF-VSDB parsing can be kept in same function, in incremental patches. V3: Rebase. V4: Rebase. V5: Rebase. V6: Addressed review comments from Ville - Add clock rate calculations for 1/10 and 1/40 ratios - Remove leftovers from old patchset V7: Added R-B from Jose. V8: Rebase. V9: Rebase. V10: Rebase. Signed-off-by:Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com
-
Shashank Sharma authored
This patch does following: - Adds a new structure (drm_hdmi_info) in drm_display_info. This structure will be used to save and indicate if sink supports advanced HDMI 2.0 features - Adds another structure drm_scdc within drm_hdmi_info, to reflect scdc support and capabilities in connected HDMI 2.0 sink. - Checks the HF-VSDB block for presence of SCDC, and marks it in scdc structure - If SCDC is present, checks if sink is capable of generating SCDC read request, and marks it in scdc structure. V2: Addressed review comments Thierry: - Fix typos in commit message and make abbreviation consistent across the commit message. - Change structure object name from hdmi_info -> hdmi - Fix typos and abbreviations in description of structure drm_hdmi_info end the description with a full stop. - Create a structure drm_scdc, and keep all information related to SCDC register set (supported, read request supported) etc in it. Ville: - Change rr -> read_request - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all of HF-VSDB parsing can be kept in same function, in incremental patches. V3: Rebase. V4: Rebase. V5: Rebase. V6: Rebase. V7: Added R-B from Jose. V8: Rebase. V9: Rebase. V10: Rebase. Signed-off-by:
-
Thierry Reding authored
This patch implements a small function that finds if a given CEA db is hdmi-forum vendor specific data block or not. V2: Rebase. V3: Added R-B from Jose. V4: Rebase V5: Rebase V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase Signed-off-by:
-
Thierry Reding authored
SCDC is a mechanism defined in the HDMI 2.0 specification that allows the source and sink devices to communicate. This commit introduces helpers to access the SCDC and provides the symbolic names for the various registers defined in the specification. V2: Rebase. V3: Added R-B from Jose. V4: Rebase V5: Addressed review comments from Ville - Handle the I2c return values in a better way (dp_dual_mode) - Make the macros for SCDC Major/Minor more readable, by adding a 'GET' in the macro names V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase Signed-off-by:
-
Nickey Yang authored
Vendor specific infoframe is mandatory for 4K2K resolution. Without this, the HDMI protocol compliance fails. Signed-off-by:
Nickey Yang <nickey.yang@rock-chips.com> Reviewed-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1490081777-2232-1-git-send-email-nickey.yang@rock-chips.com
-
Nickey Yang authored
"I2C Master Interface Extended Read Mode" implements a segment pointer-based read operation using the Special Register configuration. This patch fix https://patchwork.kernel.org/patch/7098101/ mentioned "The current implementation does not support "I2C Master Interface Extended Read Mode" to read data addressed by non-zero segment pointer, this means that if EDID has more than 1 extension blocks, EDID reading operation won't succeed" With this patch, dw-hdmi can read EDID data with 1/2/4 blocks. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by:
-
- 20 Mar, 2017 4 commits
-
-
Arnd Bergmann authored
We now call those two functions even when they are not defined or declared anywhere because DEBUG_FS is disabled: drivers/gpu/drm/msm/msm_drv.c: In function 'msm_drm_uninit': drivers/gpu/drm/msm/msm_drv.c:244:2: error: implicit declaration of function 'msm_perf_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration] drivers/gpu/drm/msm/msm_drv.c:245:2: error: implicit declaration of function 'msm_rd_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration] This adds empty stub implementations for that case. Fixes: 85eac470 ("drm/msm: Remove msm_debugfs_cleanup()") Signed-off-by:
-
Chris Wilson authored
The trick of using an uncached mmio read to ensure that the GGTT writes are flushed does not require us to do the forcewake dance, so avoid it in the hope of reducing the frequency that we do keep the device forced awake. Signed-off-by:
-
Chris Wilson authored
When switching back to execlists, we also now need to restore the tasklet handler. Reported-by:
Michał Winiarski <michal.winiarski@intel.com>
-
Gabriel Krisman Bertazi authored
In the same spirit of the fix for QXL in commit 86107838 ("drm: qxl: Don't alloc fbdev if emulation is not supported"), prevent the Oops in the unbind path of Bochs if fbdev emulation is disabled. [ 112.176009] Oops: 0002 [#1] SMP [ 112.176009] Modules linked in: bochs_drm [ 112.176009] CPU: 0 PID: 3002 Comm: bash Not tainted 4.11.0-rc1+ #111 [ 112.176009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014 [ 112.176009] task: ffff8800743bbac0 task.stack: ffffc90000b5c000 [ 112.176009] RIP: 0010:mutex_lock+0x18/0x30 [ 112.176009] RSP: 0018:ffffc90000b5fc78 EFLAGS: 00010246 [ 112.176009] RAX: 0000000000000000 RBX: 0000000000000260 RCX: 0000000000000000 [ 112.176009] RDX: ffff8800743bbac0 RSI: ffff8800787176e0 RDI: 0000000000000260 [ 112.176009] RBP: ffffc90000b5fc80 R08: ffffffff00000000 R09: 00000000ffffffff [ 112.176009] R10: ffff88007b463650 R11: 0000000000000000 R12: 0000000000000260 [ 112.176009] R13: ffff8800787176e0 R14: ffffffffa0003068 R15: 0000000000000060 [ 112.176009] FS: 00007f20564c7b40(0000) GS:ffff88007ce00000(0000) knlGS:0000000000000000 [ 112.176009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 112.176009] CR2: 0000000000000260 CR3: 000000006b89c000 CR4: 00000000000006f0 [ 112.176009] Call Trace: [ 112.176009] drm_mode_object_unregister+0x1e/0x50 [ 112.176009] drm_framebuffer_unregister_private+0x15/0x20 [ 112.176009] bochs_fbdev_fini+0x57/0x70 [bochs_drm] [ 112.176009] bochs_unload+0x16/0x50 [bochs_drm] [ 112.176009] drm_dev_unregister+0x37/0xd0 [ 112.176009] drm_put_dev+0x31/0x60 [ 112.176009] bochs_pci_remove+0x10/0x20 [bochs_drm] [ 112.176009] pci_device_remove+0x34/0xb0 [ 112.176009] device_release_driver_internal+0x150/0x200 [ 112.176009] device_release_driver+0xd/0x10 [ 112.176009] unbind_store+0x108/0x150 [ 112.176009] drv_attr_store+0x20/0x30 [ 112.176009] sysfs_kf_write+0x32/0x40 [ 112.176009] kernfs_fop_write+0x10b/0x190 [ 112.176009] __vfs_write+0x23/0x120 [ 112.176009] ? security_file_permission+0x36/0xb0 [ 112.176009] ? rw_verify_area+0x49/0xb0 [ 112.176009] vfs_write+0xb0/0x190 [ 112.176009] SyS_write+0x41/0xa0 [ 112.176009] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 112.176009] RIP: 0033:0x7f2055bd5620 [ 112.176009] RSP: 002b:00007ffed2f487d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 112.176009] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2055bd5620 [ 112.176009] RDX: 000000000000000d RSI: 0000000000ee0008 RDI: 0000000000000001 [ 112.176009] RBP: 0000000000000001 R08: 00007f2055e94760 R09: 00007f20564c7b40 [ 112.176009] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000000 [ 112.176009] R13: 00007ffed2f48d70 R14: 0000000000000000 R15: 0000000000000000 [ 112.176009] Code: 00 00 00 55 be 02 00 00 00 48 89 e5 e8 62 fb ff ff 5d c3 55 48 89 e5 53 48 89 fb e8 53 e9 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <f0> 48 0f b1 13 48 85 c0 74 08 48 89 df e8c6 ff ff ff 5b 5d c3 [ 112.176009] RIP: mutex_lock+0x18/0x30 RSP: ffffc90000b5fc78 [ 112.176009] CR2: 0000000000000260 [ 112.205622] ---[ end trace 76189cd7a9bdd155 ]--- Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170317181409.4183-1-krisman@collabora.co.ukSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
