- 08 Sep, 2013 7 commits
-
-
Jakob Bornecrantz authored
commit 6e4dcff3 upstream. This fixes the piglit test texturing/max-texture-size causing the VM to die due to a too large SVGA command. Signed-off-by:
Jakob Bornecrantz <jakob@vmware.com> Reviewed-by:
Biran Paul <brianp@vmware.com> Reviewed-by:
Zack Rusin <zackr@vmware.com> Signed-off-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Russ Anderson authored
commit 21ea9f5a upstream. "cat /sys/devices/system/memory/memory*/removable" crashed the system. The problem is that show_mem_removable() is passing a bad pfn to is_mem_section_removable(), which causes if (!node_online(page_to_nid(page))) to blow up. Why is it passing in a bad pfn? The reason is that show_mem_removable() will loop sections_per_block times. sections_per_block is 16, but mem->section_count is 8, indicating holes in this memory block. Checking that the memory section is present before checking to see if the memory section is removable fixes the problem. harp5-sys:~ # cat /sys/devices/system/memory/memory*/removable 0 1 1 1 1 1 1 1 1 1 1 1 1 1 BUG: unable to handle kernel paging request at ffffea00c3200000 IP: [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 PGD 83ffd4067 PUD 37bdfce067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: autofs4 binfmt_misc rdma_ucm rdma_cm iw_cm ib_addr ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_cm ib_uverbs ib_umad iw_cxgb3 cxgb3 mdio mlx4_en mlx4_ib ib_sa mlx4_core ib_mthca ib_mad ib_core fuse nls_iso8859_1 nls_cp437 vfat fat joydev loop hid_generic usbhid hid hwperf(O) numatools(O) dm_mod iTCO_wdt ipv6 iTCO_vendor_support igb i2c_i801 ioatdma i2c_algo_bit ehci_pci pcspkr lpc_ich i2c_core ehci_hcd ptp sg mfd_core dca rtc_cmos pps_core mperf button xhci_hcd sd_mod crc_t10dif usbcore usb_common scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh gru(O) xvma(O) xfs crc32c libcrc32c thermal sata_nv processor piix mptsas mptscsih scsi_transport_sas mptbase megaraid_sas fan thermal_sys hwmon ext3 jbd ata_piix ahci libahci libata scsi_mod CPU: 4 PID: 5991 Comm: cat Tainted: G O 3.11.0-rc5-rja-uv+ #10 Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013 task: ffff88081f034580 ti: ffff880820022000 task.ti: ffff880820022000 RIP: 0010:[<ffffffff81117ed1>] [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 RSP: 0018:ffff880820023df8 EFLAGS: 00010287 RAX: 0000000000040000 RBX: ffffea00c3200000 RCX: 0000000000000004 RDX: ffffea00c30b0000 RSI: 00000000001c0000 RDI: ffffea00c3200000 RBP: ffff880820023e38 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea00c33c0000 R13: 0000160000000000 R14: 6db6db6db6db6db7 R15: 0000000000000001 FS: 00007ffff7fb2700(0000) GS:ffff88083fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffea00c3200000 CR3: 000000081b954000 CR4: 00000000000407e0 Call Trace: show_mem_removable+0x41/0x70 dev_attr_show+0x2a/0x60 sysfs_read_file+0xf7/0x1c0 vfs_read+0xc8/0x130 SyS_read+0x5d/0xa0 system_call_fastpath+0x16/0x1b Signed-off-by:
Russ Anderson <rja@sgi.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Paul Bolle authored
commit a8f28cfa upstream. Building regmap.o triggers this GCC warning: drivers/base/regmap/regmap.c: In function ‘regmap_raw_read’: drivers/base/regmap/regmap.c:1172:6: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] Long story short: Jakub Jelinek pointed out that there is a type mismatch between 'num' in regmap_volatile_range() and 'val_count' in regmap_raw_read(). And indeed, converting 'num' to the type of 'val_count' (ie, size_t) makes this warning go away. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Eugene Surovegin authored
commit d220980b upstream. This solves a problem observed in kexec'ed kernel where 200ms timeout is too short and bootconsole fails to initialize. Console did eventually become workable but much later into the boot process. Observed timeout was around 260ms, but I decided to make it a little bigger for more reliability. This has been tested on Power7 machine with Petitboot as a primary bootloader and PowerNV firmware. Signed-off-by:
Eugene Surovegin <surovegin@google.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Paul Mackerras authored
commit bdbc29c1 upstream. On 64-bit, __pa(&static_var) gets miscompiled by recent versions of gcc as something like: addis 3,2,.LANCHOR1+4611686018427387904@toc@ha addi 3,3,.LANCHOR1+4611686018427387904@toc@l This ends up effectively ignoring the offset, since its bottom 32 bits are zero, and means that the result of __pa() still has 0xC in the top nibble. This happens with gcc 4.8.1, at least. To work around this, for 64-bit we make __pa() use an AND operator, and for symmetry, we make __va() use an OR operator. Using an AND operator rather than a subtraction ends up with slightly shorter code since it can be done with a single clrldi instruction, whereas it takes three instructions to form the constant (-PAGE_OFFSET) and add it on. (Note that MEMORY_START is always 0 on 64-bit.) Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Takashi Iwai authored
commit fb615499 upstream. The recent commit to delay the release of kobject triggered NULL dereferences of opti9xx drivers. The cause is that all snd-opti92x-ad1848, snd-opti92x-cs4231 and snd-opti93x drivers register the PnP card driver with the very same name, and also snd-opti92x-ad1848 and -cs4231 drivers register the ISA driver with the same name, too. When these drivers are built in, quick "register-release-and-re-register" actions occur, and this results in Oops because of the same name is assigned to the kobject. The fix is simply to assign individual names. As a bonus, by using KBUILD_MODNAME, the patch reduces more lines than it adds. The fix is based on the suggestion by Russell King. Reported-and-tested-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dave Kleikamp authored
commit 44512449 upstream. NFSv4 reserves readdir cookie values 0-2 for special entries (. and ..), but jfs allows a value of 2 for a non-special entry. This incompatibility can result in the nfs client reporting a readdir loop. This patch doesn't change the value stored internally, but adds one to the value exposed to the iterate method. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> [bwh: Backported to 3.2: - Adjust context - s/ctx->pos/filp->f_pos/] Tested-by:
Christian Kujau <lists@nerdbynature.de> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
- 29 Aug, 2013 14 commits
-
-
Greg Kroah-Hartman authored
-
David Vrabel authored
commit 3bc38cbc upstream. If there are UNUSABLE regions in the machine memory map, dom0 will attempt to map them 1:1 which is not permitted by Xen and the kernel will crash. There isn't anything interesting in the UNUSABLE region that the dom0 kernel needs access to so we can avoid making the 1:1 mapping and treat it as RAM. We only do this for dom0, as that is where tboot case shows up. A PV domU could have an UNUSABLE region in its pseudo-physical map and would need to be handled in another patch. This fixes a boot failure on hosts with tboot. tboot marks a region in the e820 map as unusable and the dom0 kernel would attempt to map this region and Xen does not permit unusable regions to be mapped by guests. (XEN) 0000000000000000 - 0000000000060000 (usable) (XEN) 0000000000060000 - 0000000000068000 (reserved) (XEN) 0000000000068000 - 000000000009e000 (usable) (XEN) 0000000000100000 - 0000000000800000 (usable) (XEN) 0000000000800000 - 0000000000972000 (unusable) tboot marked this region as unusable. (XEN) 0000000000972000 - 00000000cf200000 (usable) (XEN) 00000000cf200000 - 00000000cf38f000 (reserved) (XEN) 00000000cf38f000 - 00000000cf3ce000 (ACPI data) (XEN) 00000000cf3ce000 - 00000000d0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fe000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000630000000 (usable) Signed-off-by:
David Vrabel <david.vrabel@citrix.com> [v1: Altered the patch and description with domU's with UNUSABLE regions] Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Martin Peschke authored
commit 924dd584 upstream. BUG: sleeping function called from invalid context at kernel/workqueue.c:2752 in_atomic(): 1, irqs_disabled(): 1, pid: 360, name: zfcperp0.0.1700 CPU: 1 Not tainted 3.9.3+ #69 Process zfcperp0.0.1700 (pid: 360, task: 0000000075b7e080, ksp: 000000007476bc30) <snip> Call Trace: ([<00000000001165de>] show_trace+0x106/0x154) [<00000000001166a0>] show_stack+0x74/0xf4 [<00000000006ff646>] dump_stack+0xc6/0xd4 [<000000000017f3a0>] __might_sleep+0x128/0x148 [<000000000015ece8>] flush_work+0x54/0x1f8 [<00000000001630de>] __cancel_work_timer+0xc6/0x128 [<00000000005067ac>] scsi_device_dev_release_usercontext+0x164/0x23c [<0000000000161816>] execute_in_process_context+0x96/0xa8 [<00000000004d33d8>] device_release+0x60/0xc0 [<000000000048af48>] kobject_release+0xa8/0x1c4 [<00000000004f4bf2>] __scsi_iterate_devices+0xfa/0x130 [<000003ff801b307a>] zfcp_erp_strategy+0x4da/0x1014 [zfcp] [<000003ff801b3caa>] zfcp_erp_thread+0xf6/0x2b0 [zfcp] [<000000000016b75a>] kthread+0xf2/0xfc [<000000000070c9de>] kernel_thread_starter+0x6/0xc [<000000000070c9d8>] kernel_thread_starter+0x0/0xc Apparently, the ref_count for some scsi_device drops down to zero, triggering device removal through execute_in_process_context(), while the lldd error recovery thread iterates through a scsi device list. Unfortunately, execute_in_process_context() decides to immediately execute that device removal function, instead of scheduling asynchronous execution, since it detects process context and thinks it is safe to do so. But almost all calls to shost_for_each_device() in our lldd are inside spin_lock_irq, even in thread context. Obviously, schedule() inside spin_lock_irq sections is a bad idea. Change the lldd to use the proper iterator function, __shost_for_each_device(), in combination with required locking. Occurences that need to be changed include all calls in zfcp_erp.c, since those might be executed in zfcp error recovery thread context with a lock held. Other occurences of shost_for_each_device() in zfcp_fsf.c do not need to be changed (no process context, no surrounding locking). The problem was introduced in Linux 2.6.37 by commit b62a8d9b "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit". Reported-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Martin Peschke authored
commit d79ff142 upstream. This patch adds wait_event_interruptible_lock_irq_timeout(), which is a straight-forward descendant of wait_event_interruptible_timeout() and wait_event_interruptible_lock_irq(). The zfcp driver used to call wait_event_interruptible_timeout() in combination with some intricate and error-prone locking. Using wait_event_interruptible_lock_irq_timeout() as a replacement nicely cleans up that locking. This rework removes a situation that resulted in a locking imbalance in zfcp_qdio_sbal_get(): BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10 last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp] It was introduced by commit c2af7545 "[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit without a required lock being held. The problem occured when a special, non-SCSI I/O request was being submitted in process context, when the adapter's queues had been torn down. In this case the bug surfaced when the Fibre Channel port connection for a well-known address was closed during a concurrent adapter shut-down procedure, which is a rare constellation. This patch also fixes these warnings from the sparse tool (make C=1): drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in 'zfcp_qdio_sbal_check' - wrong count at exit drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in 'zfcp_qdio_sbal_get' - unexpected unlock Last but not least, we get rid of that crappy lock-unlock-lock sequence at the beginning of the critical section. It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held. Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Reported-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Terry Suereth authored
commit 8ffff94d upstream. Fixing support for the Silicon Image 3826 port multiplier, by applying to it the same quirks applied to the Silicon Image 3726. Specifically fixes the repeated timeout/reset process which previously afflicted the 3726, as described from line 290. Slightly based on notes from: https://bugzilla.redhat.com/show_bug.cgi?id=890237Signed-off-by:
Terry Suereth <terry.suereth@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 909bd592 upstream. We want the data stored in "addr" and "qual", but the extra ampersands mean we are copying stack data instead. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Vyacheslav Dubeyko authored
commit 4bf93b50 upstream. Fix the issue with improper counting number of flying bio requests for BIO_EOPNOTSUPP error detection case. The sb_nbio must be incremented exactly the same number of times as complete() function was called (or will be called) because nilfs_segbuf_wait() will call wail_for_completion() for the number of times set to sb_nbio: do { wait_for_completion(&segbuf->sb_bio_event); } while (--segbuf->sb_nbio > 0); Two functions complete() and wait_for_completion() must be called the same number of times for the same sb_bio_event. Otherwise, wait_for_completion() will hang or leak. Signed-off-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by:
-
Vyacheslav Dubeyko authored
commit 2df37a19 upstream. Remove double call of bio_put() in nilfs_end_bio_write() for the case of BIO_EOPNOTSUPP error detection. The issue was found by Dan Carpenter and he suggests first version of the fix too. Signed-off-by:
-
Wladislav Wiebe authored
commit 9e401275 upstream. Already existing property flags are filled wrong for properties created from initial FDT. This could cause problems if this DYNAMIC device-tree functions are used later, i.e. properties are attached/detached/replaced. Simply dumping flags from the running system show, that some initial static (not allocated via kzmalloc()) nodes are marked as dynamic. I putted some debug extensions to property_proc_show(..) : .. + if (OF_IS_DYNAMIC(pp)) + pr_err("DEBUG: xxx : OF_IS_DYNAMIC\n"); + if (OF_IS_DETACHED(pp)) + pr_err("DEBUG: xxx : OF_IS_DETACHED\n"); when you operate on the nodes (e.g.: ~$ cat /proc/device-tree/*some_node*) you will see that those flags are filled wrong, basically in most cases it will dump a DYNAMIC or DETACHED status, which is in not true. (BTW. this OF_IS_DETACHED is a own define for debug purposes which which just make a test_bit(OF_DETACHED, &x->_flags) If nodes are dynamic kernel is allowed to kfree() them. But it will crash attempting to do so on the nodes from FDT -- they are not allocated via kzmalloc(). Signed-off-by:
Wladislav Wiebe <wladislav.kw@gmail.com> Acked-by:
Alexander Sverdlin <alexander.sverdlin@nsn.com> Signed-off-by:
Rob Herring <rob.herring@calxeda.com> Signed-off-by:
-
Chris Wilson authored
commit 884020bf upstream. After any "soft gfx reset" we must manually invalidate the TLBs associated with each ring. Empirically, it seems that a suspend/resume or D3-D0 cycle count as a "soft reset". The symptom is that the hardware would fail to note the new address for its status page, and so it would continue to write the shadow registers and breadcrumbs into the old physical address (now used by something completely different, scary). Whereas the driver would read the new status page and never see any progress, it would appear that the GPU hung immediately upon resume. Based on a patch by naresh kumar kachhi <naresh.kumar.kacchi@intel.com> Reported-by:
Thiago Macieira <thiago@kde.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64725Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
David Vrabel authored
commit 84ca7a8e upstream. The sizeof() argument in init_evtchn_cpu_bindings() is incorrect resulting in only the first 64 (or 32 in 32-bit guests) ports having their bindings being initialized to VCPU 0. In most cases this does not cause a problem as request_irq() will set the irq affinity which will set the correct local per-cpu mask. However, if the request_irq() is called on a VCPU other than 0, there is a window between the unmasking of the event and the affinity being set were an event may be lost because it is not locally unmasked on any VCPU. If request_irq() is called on VCPU 0 then local irqs are disabled during the window and the race does not occur. Fix this by initializing all NR_EVENT_CHANNEL bits in the local per-cpu masks. Signed-off-by:
-
Jussi Kivilinna authored
commit 1206ff4f upstream. Patch fixes zd1201 not to use stack as URB transfer_buffer. URB buffers need to be DMA-able, which stack is not. Patch is only compile tested. Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by:
-
Tejun Heo authored
commit a2c1c57b upstream. To avoid executing the same work item concurrenlty, workqueue hashes currently busy workers according to their current work items and looks up the the table when it wants to execute a new work item. If there already is a worker which is executing the new work item, the new item is queued to the found worker so that it gets executed only after the current execution finishes. Unfortunately, a work item may be freed while being executed and thus recycled for different purposes. If it gets recycled for a different work item and queued while the previous execution is still in progress, workqueue may make the new work item wait for the old one although the two aren't really related in any way. In extreme cases, this false dependency may lead to deadlock although it's extremely unlikely given that there aren't too many self-freeing work item users and they usually don't wait for other work items. To alleviate the problem, record the current work function in each busy worker and match it together with the work item address in find_worker_executing_work(). While this isn't complete, it ensures that unrelated work items don't interact with each other and in the very unlikely case where a twisted wq user triggers it, it's always onto itself making the culprit easy to spot. Signed-off-by:
Andrey Isakov <andy51@gmx.ru> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51701 [lizf: Backported to 3.4: - Adjust context - Incorporate earlier logging cleanup in process_one_work() from 044c782c ('workqueue: fix checkpatch issues')] Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
-
Lai Jiangshan authored
commit 3aa62497 upstream. Currently, when try_to_grab_pending() grabs a delayed work item, it leaves its linked work items alone on the delayed_works. The linked work items are always NO_COLOR and will cause future cwq_activate_first_delayed() increase cwq->nr_active incorrectly, and may cause the whole cwq to stall. For example, state: cwq->max_active = 1, cwq->nr_active = 1 one work in cwq->pool, many in cwq->delayed_works. step1: try_to_grab_pending() removes a work item from delayed_works but leaves its NO_COLOR linked work items on it. step2: Later on, cwq_activate_first_delayed() activates the linked work item increasing ->nr_active. step3: cwq->nr_active = 1, but all activated work items of the cwq are NO_COLOR. When they finish, cwq->nr_active will not be decreased due to NO_COLOR, and no further work items will be activated from cwq->delayed_works. the cwq stalls. Fix it by ensuring the target work item is activated before stealing PENDING in try_to_grab_pending(). This ensures that all the linked work items are activated without incorrectly bumping cwq->nr_active. tj: Updated comment and description. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
-
- 20 Aug, 2013 19 commits
-
-
Greg Kroah-Hartman authored
-
Jan Kara authored
commit 91aa11fa upstream. When jbd2_journal_dirty_metadata() returns error, __ext4_handle_dirty_metadata() stops the handle. However callers of this function do not count with that fact and still happily used now freed handle. This use after free can result in various issues but very likely we oops soon. The motivation of adding __ext4_journal_stop() into __ext4_handle_dirty_metadata() in commit 9ea7a0df seems to be only to improve error reporting. So replace __ext4_journal_stop() with ext4_journal_abort_handle() which was there before that commit and add WARN_ON_ONCE() to dump stack to provide useful information. Reported-by:
Sage Weil <sage@inktank.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Geert Uytterhoeven authored
commit e8184e10 upstream. As pointed out by Andreas Schwab, pointers passed to ARAnyM NatFeat calls should be physical addresses, not virtual addresses. Fortunately on Atari, physical and virtual kernel addresses are the same, as long as normal kernel memory is concerned, so this usually worked fine without conversion. But for modules, pointers to literal strings are located in vmalloc()ed memory. Depending on the version of ARAnyM, this causes the nf_get_id() call to just fail, or worse, crash ARAnyM itself with e.g. Gotcha! Illegal memory access. Atari PC = $968c This is a big issue for distro kernels, who want to have all drivers as loadable modules in an initrd. Add a wrapper for nf_get_id() that copies the literal to the stack to work around this issue. Reported-by:
Thorsten Glaser <tg@debian.org> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Andreas Schwab authored
commit ea077b1b upstream. Explicitly truncate the second operand of do_div() to 32 bits to guard against bogus code calling it with a 64-bit divisor. [Thorsten] After upgrading from 3.2 to 3.10, mounting a btrfs volume fails with: btrfs: setting nodatacow, compression disabled btrfs: enabling auto recovery btrfs: disk space caching is enabled *** ZERO DIVIDE *** FORMAT=2 Current process id is 722 BAD KERNEL TRAP: 00000000 Modules linked in: evdev mac_hid ext4 crc16 jbd2 mbcache btrfs xor lzo_compress zlib_deflate raid6_pq crc32c libcrc32c PC: [<319535b2>] __btrfs_map_block+0x11c/0x119a [btrfs] SR: 2000 SP: 30c1fab4 a2: 30f0faf0 d0: 00000000 d1: 00001000 d2: 00000000 d3: 00000000 d4: 00010000 d5: 00000000 a0: 3085c72c a1: 3085c72c Process mount (pid: 722, task=30f0faf0) Frame format=2 instr addr=319535ae Stack from 30c1faec: 00000000 00000020 00000000 00001000 00000000 01401000 30253928 300ffc00 00a843ac 3026f640 00000000 00010000 0009e250 00d106c0 00011220 00000000 00001000 301c6830 0009e32a 000000ff 00000009 3085c72c 00000000 00000000 30c1fd14 00000000 00000020 00000000 30c1fd14 0009e26c 00000020 00000003 00000000 0009dd8a 300b0b6c 30253928 00a843ac 00001000 00000000 00000000 0000a008 3194e76a 30253928 00a843ac 00001000 00000000 00000000 00000002 Call Trace: [<00001000>] kernel_pg_dir+0x0/0x1000 [...] Code: 222e ff74 2a2e ff5c 2c2e ff60 4c45 1402 <2d40> ff64 2d41 ff68 2205 4c2e 1800 ff68 4c04 0800 2041 d1c0 2206 4c2e 1400 ff68 [Geert] As diagnosed by Andreas, fs/btrfs/volumes.c:__btrfs_map_block() calls do_div(stripe_nr, stripe_len); with stripe_len u64, while do_div() assumes the divisor is a 32-bit number. Due to the lack of truncation in the m68k-specific implementation of do_div(), the division is performed using the upper 32-bit word of stripe_len, which is zero. This was introduced by commit 53b381b3 ("Btrfs: RAID5 and RAID6"), which changed the divisor from map->stripe_len (struct map_lookup.stripe_len is int) to a 64-bit temporary. Reported-by:
Andreas Schwab <schwab@linux-m68k.org> Tested-by:
-
Will Deacon authored
commit c95eb318 upstream. It is possible to construct an event group with a software event as a group leader and then subsequently add a hardware event to the group. This results in the event group being validated by adding all members of the group to a fake PMU and attempting to allocate each event on their respective PMU. Unfortunately, for software events wthout a corresponding arm_pmu, this results in a kernel crash attempting to dereference the ->get_event_idx function pointer. This patch fixes the problem by checking explicitly for software events and ignoring those in event validation (since they can always be scheduled). We will probably want to revisit this for 3.12, since the validation checks don't appear to work correctly when dealing with multiple hardware PMUs anyway. Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Tested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Geert Uytterhoeven authored
commit 5e7b6ed8 upstream. commit a2d063ac ("extable, core_kernel_data(): Make sure all archs define _sdata") missed xtensa. Xtensa does have a start of data marker, but calls it _fdata, causing kernel/built-in.o:(.text+0x964): undefined reference to `_sdata' _stext was already defined, but it was duplicated by _fdata. Signed-off-by:
-
Max Filippov authored
commit f6a03a12 upstream. Now that binutils generate *.unlikely sections which don't follow documented (info as) literal section naming rules, section name transformation script doesn't work well resulting in the following errors at vmlinux link time: main.c:(.text.unlikely+0x3): dangerous relocation: l32r: literal placed after use: .literal.unlikely Fix section name transformation script by adding specific rule for .text.unlikely sections. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Johan Hovold authored
commit ef6c8c1d upstream. The parallel-port code of the drivers used a stack allocated control-request buffer for asynchronous (and possibly deferred) control requests. This not only violates the no-DMA-from-stack requirement but could also lead to corrupt control requests being submitted. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Oliver Neukum authored
commit 304ab4ab upstream. These devices tend to become unresponsive after S3 Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Stephane Grosjean authored
commit 3c322a56 upstream. Fix possibly wrong memcpy() bytes length since some CAN records received from PCAN-USB could define a DLC field in range [9..15]. In that case, the real DLC value MUST be used to move forward the record pointer but, only 8 bytes max. MUST be copied into the data field of the struct can_frame object of the skb given to the network core. Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Stanislaw Gruszka authored
commit 788f7a56 upstream. Using rfkill switch can make firmware unstable, what cause various Microcode errors and kernel warnings. Reseting firmware just after rfkill off (radio on) helped with that. Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=977053Reported-and-tested-by:
Justin Pearce <whitefox@guardianfox.net> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit eca396d7 upstream. If device was put into a sleep and system was restarted or module reloaded, we have to wake device up before sending other commands. Otherwise it will fail to start with Microcode error. Signed-off-by:
-
Nicolas Dichtel authored
commit 85dfb745 upstream. This field was left uninitialized. Some user daemons perform check against this field. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Cc: Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
Ralf Baechle authored
Upstream commit 8b923214. This fixes: MODPOST 393 modules ERROR: "min_low_pfn" [arch/mips/kvm/kvm.ko] undefined! make[3]: *** [__modpost] Error 1 It would have been possible to just export min_low_pfn but in the end pfn_valid should return 1 for any pfn argument for which a struct page exists so using min_low_pfn was wrong anyway. [Backport to 3.4 kernel. Applies cleanly on top of current 3.4 patch queue, and fixes "make ARCH=mips allmodconfig; make ARCH=mips" build problem. - Guenter] Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
David S. Miller authored
commit 74c7b289 upstream. Otherwise if no references exist in the static kernel image, we won't export the symbol properly to modules. Signed-off-by:
-
Sam Ravnborg authored
commit de36e66d upstream. Based on copy from microblaze add ucmpdi2 implementation. This fixes build of niu driver which failed with: drivers/built-in.o: In function `niu_get_nfc': niu.c:(.text+0x91494): undefined reference to `__ucmpdi2' This driver will never be used on a sparc32 system, but patch added to fix build breakage with all*config builds. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
NeilBrown authored
commit e2d59925 upstream. Various places in raid1 and raid10 are calling raise_barrier when they really should call freeze_array. The former is only intended to be called from "make_request". The later has extra checks for 'nr_queued' and makes a call to flush_pending_writes(), so it is safe to call it from within the management thread. Using raise_barrier will sometimes deadlock. Using freeze_array should not. As 'freeze_array' currently expects one request to be pending (in handle_read_error - the only previous caller), we need to pass it the number of pending requests (extra) to ignore. The deadlock was made particularly noticeable by commits 050b6615 (raid10) and 6b740b8d (raid1) which appeared in 3.4, so the fix is appropriate for any -stable kernel since then. This patch probably won't apply directly to some early kernels and will need to be applied by hand. Cc: stable@vger.kernel.org Reported-by:
Alexander Lyakas <alex.bolshoy@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.de> [adjust context to make it can be apply on top of 3.4 ] Signed-off-by:
Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by:
-
Will Deacon authored
commit cd8d2331 upstream. Due to all of the goodness being packed into today's kernels, the resulting image isn't as slim as it once was. In light of this, don't pass -msmall-data to gcc, which otherwise results in link failures due to impossible relocations when compiling anything but the most trivial configurations. Reviewed-by:
Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Tested-by:
Thorsten Kranzkowski <dl8bcu@dl8bcu.de> Signed-off-by:
Michael Cree <mcree@orcon.net.nz> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit aa709f3b upstream. Newer gcc are being a bit blind here (it's pretty obvious we don't reach the code path using the array if we haven't initialized the pointer) but none of that is performance critical so let's just silence it. Signed-off-by:
-
