When disabling a regulator fails while the device goes away, there is
little we can do and the machine is probably in enough trouble that any
action we'd want to take fails anyhow.

The return value used to be passed on in cs42l51_i2c_remove() (i.e. the
i2c device remove callback). But the i2c core ignores the error code
(apart from emitting a generic warning) and removes the device anyhow.

So return 0 unconditionally in cs42l51_i2c_remove(), and instead of
returning the error code to the upper layer emit a more helpful warning
message. After that nobody is interested any more in the actual error
code, so let cs42l51_remove() return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220110071832.306185-1-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Sameer Pujar <spujar@nvidia.com>:

This adds APE support on Tegra234 and enables sound card on
Jetson AGX Orin platform.

The first count check and fixup against "buffer - lpos" can be removed as
we will do the adjustment later against the "avail" in
sof_dfsentry_trace_read()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220128120627.18443-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

There's no need to complicate examples with a platform specific macro.
It also complicates example parsing to figure out the number of interrupt
cells in examples (based on bracketing).
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220126231358.1637174-1-robh@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The limitation to assign a link DMA channel for a BE iff the
corresponding host DMA channel is assigned to a connected FE is only
applicable if the PROCEN_FMT_QUIRK is set. So, remove it for platforms
that do not enable the quirk.

Complements: a792bfc1 ("ASoC: SOF: Intel: hda-stream: limit PROCEN workaround")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220128130017.28508-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Update binding docs for devices which are part of APE subsystem
on Tegra234 chip.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1643373476-8538-4-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

The register offsets of switches connecting various AHUB internal
modules have changed from previous chip. Address this variation by
making use of Tegra234 based compatible.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1643373476-8538-2-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove SSICR_MST and SSICR_CKDV macros which are defined more than once.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220125132457.14984-4-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

A copy of substream pointer is stored in priv structure during
rz_ssi_dai_trigger() callback ie in SNDRV_PCM_TRIGGER_START case
and the pointer is assigned to NULL in case of SNDRV_PCM_TRIGGER_STOP.

The driver used the locks only in rz_ssi_stream_is_valid() and assigned
the local substream pointer to NULL in rz_ssi_dai_trigger() callback but
never locked it while making a local copy.

This patch adds the rz_ssi_set_substream() helper function to set the
substream pointer with locks acquired and replaces the instances of
setting the local substream pointer with the rz_ssi_set_substream()
function.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220125132457.14984-3-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use a do-while loop while reading the samples from RX FIFO. The "done"
flag was only changed as an outcome of the last if-statement (last step)
in this entire procedure. This patch moves the condition from if
statement to while and drops the "done" variable for readability.

While at it, also drop the unneeded parentheses around runtime->dma_area.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220125132457.14984-2-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Add support for platforms without amplifier (headset codec only) and
without Intel graphics.

Merge series from Daniel Beer <daniel.beer@igorinstitute.com>:

This pair of patches implements support for the TAS5805M class D audio
amplifier. This driver, and the example configuration in the device-tree
file, were originally based on a 4.19 series kernel and have been
modified slightly from the tested version.

Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:

Add system suspend and resume handlers so that the cs42l42 is cleanly
put into power-off state during system suspend and the registers are
restored in resume.

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Make sure the device version is taken into account when selecting a
machine driver, in addition to device manufacturer and part_id, and
simplify code with a macro.

Merge series from Ariel D'Alessandro <ariel.dalessandro@collabora.com>:

Sound cards may allow using different main clock inputs. In the generic
fsl-asoc-card driver, these values are hardcoded for each specific card
configuration.  Let's make it more flexible, allowing setting mclk-id
from the device-tree node.

Merge series from Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>:

Hi All,

This patch series does code cleanup and fixes to the rz-ssi driver.

Cheers,
Prabhakar

Lad Prabhakar (5):
  ASoC: sh: rz-ssi: Drop calling rz_ssi_pio_recv() recursively
  ASoC: sh: rz-ssi: Make the data structures available before
    registering the handlers
  ASoC: sh: rz-ssi: Drop ssi parameter from rz_ssi_stream_init()
  ASoC: sh: rz-ssi: Make return type of rz_ssi_stream_is_valid() to bool
  ASoC: sh: rz-ssi: Add functions to get/set substream pointer

 sound/soc/sh/rz-ssi.c | 147 ++++++++++++++++++++++++------------------
 1 file changed, 86 insertions(+), 61 deletions(-)

--
2.17.1

Merge series from Robert Hancock <robert.hancock@calian.com>:

There are drivers in mainline for the Xilinx Audio Formatter and Xilinx
I2S IP cores. However, because of a few issues, these were only really
usable with Xilinx's xlnx_pl_snd_card top-level driver, which is not in
mainline (and not suitable for mainline).

The fixes in this patchset, for the simple-card layer as well as the
Xilinx drivers, now allow these drivers to be properly used with
simple-card without any out-of-tree support code.

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

After the first firmware boot, the firmware is capable of
saving/restoring its context to/from IMR (Isolated Memory Region, set
aside by BIOS on startup). This capability improves the resume speed.

Due to an unexplained issue on Up2 boards, this capability is disabled
on ApolloLake.

For backwards compatibility, the regular boot flow is used with older
firmware. For added peace of mind, a kernel module parameter is
provided to force the regular boot flow - this shouldn't be necessary
since we've been testing these patches for 6+ months.

Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:

Following series performs few cleanups in topology code.

First patch reduces number of prints we get from failure.
Second allos TLV controls to be either read or write which should be
possible as evidenced by further code in function.
Last one cleanups after refactoring of memory handling.

v2:
 - Add missing Fixes tag on second patch
 - Add Reviewed-by tag from Pierre

Amadeusz Sławiński (3):
  ASoC: topology: Remove superfluous error prints
  ASoC: topology: Allow TLV control to be either read or write
  ASoC: topology: Optimize soc_tplg_dapm_graph_elems_load behavior

 sound/soc/soc-topology.c | 103 ++++++++++-----------------------------
 1 file changed, 27 insertions(+), 76 deletions(-)

--
2.25.1

Add a new system-clock-fixed flag, which can be used to specify that the
driver cannot or should not allow the clock frequency of the mapped clock
to be modified. This behavior is also implied if the system-clock-frequency
parameter is set explicitly - the flag is meant for cases where a clock is
mapped to the DAI but which is, or should be treated as, fixed.

When mclk-fs is also specified, this causes a PCM constraint to be added
which enforces that only the corresponding valid sample rate can be used.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-7-robert.hancock@calian.comSigned-off-by: Mark Brown <broonie@kernel.org>

Document the new system-clock-fixed flag, which can be used to specify
that the driver cannot or should not allow the clock frequency of the
mapped clock to be modified.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-6-robert.hancock@calian.comSigned-off-by: Mark Brown <broonie@kernel.org>

If an mclk-fs value was provided in the device tree configuration, the
calculated MCLK was fed into the downstream codec DAI and CPU DAI,
however set_sysclk was not being called on the platform device. Some
platform devices such as the Xilinx Audio Formatter need to know the MCLK
as well.

Call snd_soc_component_set_sysclk on each component in the stream to set
the proper sysclk value in addition to the existing call of
snd_soc_dai_set_sysclk on the codec DAI and CPU DAI. This may end up
resulting in redundant calls if one of the snd_soc_dai_set_sysclk calls
ends up calling snd_soc_component_set_sysclk itself, but that isn't
expected to cause any significant harm.

Fixes: f48dcbb6 ("ASoC: simple-card-utils: share asoc_simple_hw_param()")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-5-robert.hancock@calian.comSigned-off-by: Mark Brown <broonie@kernel.org>

This driver previously only handled the set_clkdiv divider callback when
setting the SCLK Out Divider field in the I2S Timing Control register.
However, when using the simple-audio-card driver, the set_sysclk function
is called but not set_clkdiv. This caused the divider not to be set,
leaving it at an invalid value of 0 and resulting in a very low SCLK
output rate.

Handle set_clkdiv and store the sysclk (MCLK) value for later use in
hw_params to set the SCLK Out Divider such that:
MCLK/SCLK = divider * 2
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-4-robert.hancock@calian.comSigned-off-by: Mark Brown <broonie@kernel.org>

An upcoming change will require storing additional driver data other
than the memory base address. Create a drvdata structure and use that
rather than storing the raw base address pointer.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-3-robert.hancock@calian.comSigned-off-by: Mark Brown <broonie@kernel.org>

This driver did not set the MM2S Fs Multiplier Register to the proper
value for playback streams. This needs to be set to the sample rate to
MCLK multiplier, or random stream underflows can occur on the downstream
I2S transmitter.

Store the sysclk value provided via the set_sysclk callback and use that
in conjunction with the sample rate in the hw_params callback to calculate
the proper value to set for this register.

Fixes: 6f6c3c36 ("ASoC: xlnx: add pcm formatter platform driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220120195832.1742271-2-robert.hancock@calian.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since the potential failure of the devm_regmap_init_mmio(), it will
return error pointer and be assigned to the regmap.
Then the error pointer will be dereferenced.
For example rx->regmap will be used in rx_macro_mclk_enable().
Therefore, it should be better to check it.

Fixes: af3d54b9 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Fixes: c39667dd ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Fixes: 809bcbce ("ASoC: codecs: lpass-wsa-macro: Add support to WSA Macro")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220121171031.2826198-1-jiasheng@iscas.ac.cnSigned-off-by: Mark Brown <broonie@kernel.org>

codec system clock source support 512FS MCLK synchronous directly, so
no need to set PLL configuration when MCLK 24.576MHz.
Suggested-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120054012.15849-1-mac.chiang@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We have new platform with rt5682s as a primary codec and rt1019 as an
amp codec. Add machine struct to register sof audio based sound card
on such Chrome machine.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: V sujith kumar Reddy <vsujithkumar.reddy@amd.com>
Link: https://lore.kernel.org/r/20220122194707.2661026-1-vsujithkumar.reddy@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

The config->pcm_hardware may be NULL when config->prealloc_buffer_size
is not zero, so it is better to move max_buffer_size assignment under
a separate condition.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1642646642-15908-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Return value from io_remap_pfn_range() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Link: https://lore.kernel.org/r/20220117110357.863990-1-chi.minghao@zte.com.cnSigned-off-by: Mark Brown <broonie@kernel.org>

Return value from devm_snd_soc_register_component() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220110012833.643994-1-chi.minghao@zte.com.cnSigned-off-by: Mark Brown <broonie@kernel.org>

Add constants for the different PLL clock inputs in tlv320aic31xx.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Link: https://lore.kernel.org/r/20220117132109.283365-3-ariel.dalessandro@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Let's use a more generic name, so other definitions for tlv320aic31xx
can be included.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220117132109.283365-2-ariel.dalessandro@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now that fsl-asoc-card support setting mclk-id through the device-tree
mclk-id property, let's remove the default BCLK configuration for this
card.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Link: https://lore.kernel.org/r/20220117132109.283365-6-ariel.dalessandro@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Sound cards may allow using different main clock inputs. In the generic
fsl-asoc-card driver, these values are hardcoded for each specific card
configuration.

Let's make it more flexible, allowing setting mclk-id from the
device-tree node. Otherwise, the default value for each card
configuration is used.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Link: https://lore.kernel.org/r/20220117132109.283365-5-ariel.dalessandro@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Support setting the sound card main clock input from the device-tree
using the mclk-id property.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Link: https://lore.kernel.org/r/20220117132109.283365-4-ariel.dalessandro@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a board config adl_rt5682 to support alc5682 headset codec without
speaker amplifier. Follow Intel BT offload design by connecting
alc5682 to SSP0.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120230226.175906-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support to systems where iDisp HDMI/DP audio codec is disabled for some
reason, switch codecs to SoC dummy in the affected DAI links. This allows
to reuse existing topologies as hdmi_num is 3 by default.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120230226.175906-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We can exclude the sdw unique id and compare the sdw adr directly when
we are finding out identical parts.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120232157.199919-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Codecs with the same part id, manufacturer id and part id, but different
sdw version should be treated as different codecs. For example, rt711 and
rt711-sdca are different. So, we should match sdw version as well.
Reported-by: Reddy Muralidhar <muralidhar.reddy@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220120232157.199919-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>