- 02 Apr, 2021 25 commits
-
-
Max Gurtovoy authored
SGLs support is mandatory for NVMe/tcp, make sure that the target is aligned to the specification. Signed-off-by:
Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Wunderlich, Mark authored
Add 'idle_poll_period_usecs' option used by io_work() to support network devices enabled with advanced interrupt moderation supporting a relaxed interrupt model. It was discovered that such a NIC used on the target was unable to support initiator connection establishment, caused by the existing io_work() flow that immediately exits after a loop with no activity and does not re-queue itself. With this new option a queue is assigned a period of time that no activity must occur in order to become 'idle'. Until the queue is idle the work item is requeued. The new module option is defined as changeable making it flexible for testing purposes. The pre-existing legacy behavior is preserved when no module option for idle_poll_period_usecs is specified. Signed-off-by:
Mark Wunderlich <mark.wunderlich@intel.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Sagi Grimberg authored
We are not changing anything in the TCP connection state so we should not take a write_lock but rather a read lock. This caused a deadlock when running nvmet-tcp and nvme-tcp on the same system, where state_change callbacks on the host and on the controller side have causal relationship and made lockdep report on this with blktests: ================================ WARNING: inconsistent lock state 5.12.0-rc3 #1 Tainted: G I -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-R} usage. nvme/1324 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888363151000 (clock-AF_INET){++-?}-{2:2}, at: nvme_tcp_state_change+0x21/0x150 [nvme_tcp] {IN-SOFTIRQ-W} state was registered at: __lock_acquire+0x79b/0x18d0 lock_acquire+0x1ca/0x480 _raw_write_lock_bh+0x39/0x80 nvmet_tcp_state_change+0x21/0x170 [nvmet_tcp] tcp_fin+0x2a8/0x780 tcp_data_queue+0xf94/0x1f20 tcp_rcv_established+0x6ba/0x1f00 tcp_v4_do_rcv+0x502/0x760 tcp_v4_rcv+0x257e/0x3430 ip_protocol_deliver_rcu+0x69/0x6a0 ip_local_deliver_finish+0x1e2/0x2f0 ip_local_deliver+0x1a2/0x420 ip_rcv+0x4fb/0x6b0 __netif_receive_skb_one_core+0x162/0x1b0 process_backlog+0x1ff/0x770 __napi_poll.constprop.0+0xa9/0x5c0 net_rx_action+0x7b3/0xb30 __do_softirq+0x1f0/0x940 do_softirq+0xa1/0xd0 __local_bh_enable_ip+0xd8/0x100 ip_finish_output2+0x6b7/0x18a0 __ip_queue_xmit+0x706/0x1aa0 __tcp_transmit_skb+0x2068/0x2e20 tcp_write_xmit+0xc9e/0x2bb0 __tcp_push_pending_frames+0x92/0x310 inet_shutdown+0x158/0x300 __nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp] nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp] nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp] nvme_do_delete_ctrl+0x100/0x10c [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write_iter+0x2c7/0x460 new_sync_write+0x36c/0x610 vfs_write+0x5c0/0x870 ksys_write+0xf9/0x1d0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae irq event stamp: 10687 hardirqs last enabled at (10687): [<ffffffff9ec376bd>] _raw_spin_unlock_irqrestore+0x2d/0x40 hardirqs last disabled at (10686): [<ffffffff9ec374d8>] _raw_spin_lock_irqsave+0x68/0x90 softirqs last enabled at (10684): [<ffffffff9f000608>] __do_softirq+0x608/0x940 softirqs last disabled at (10649): [<ffffffff9cdedd31>] do_softirq+0xa1/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(clock-AF_INET); <Interrupt> lock(clock-AF_INET); *** DEADLOCK *** 5 locks held by nvme/1324: #0: ffff8884a01fe470 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0xf9/0x1d0 #1: ffff8886e435c090 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x216/0x460 #2: ffff888104d90c38 (kn->active#255){++++}-{0:0}, at: kernfs_remove_self+0x22d/0x330 #3: ffff8884634538d0 (&queue->queue_lock){+.+.}-{3:3}, at: nvme_tcp_stop_queue+0x52/0xb0 [nvme_tcp] #4: ffff888363150d30 (sk_lock-AF_INET){+.+.}-{0:0}, at: inet_shutdown+0x59/0x300 stack backtrace: CPU: 26 PID: 1324 Comm: nvme Tainted: G I 5.12.0-rc3 #1 Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.10.0 11/12/2020 Call Trace: dump_stack+0x93/0xc2 mark_lock_irq.cold+0x2c/0xb3 ? verify_lock_unused+0x390/0x390 ? stack_trace_consume_entry+0x160/0x160 ? lock_downgrade+0x100/0x100 ? save_trace+0x88/0x5e0 ? _raw_spin_unlock_irqrestore+0x2d/0x40 mark_lock+0x530/0x1470 ? mark_lock_irq+0x1d10/0x1d10 ? enqueue_timer+0x660/0x660 mark_usage+0x215/0x2a0 __lock_acquire+0x79b/0x18d0 ? tcp_schedule_loss_probe.part.0+0x38c/0x520 lock_acquire+0x1ca/0x480 ? nvme_tcp_state_change+0x21/0x150 [nvme_tcp] ? rcu_read_unlock+0x40/0x40 ? tcp_mtu_probe+0x1ae0/0x1ae0 ? kmalloc_reserve+0xa0/0xa0 ? sysfs_file_ops+0x170/0x170 _raw_read_lock+0x3d/0xa0 ? nvme_tcp_state_change+0x21/0x150 [nvme_tcp] nvme_tcp_state_change+0x21/0x150 [nvme_tcp] ? sysfs_file_ops+0x170/0x170 inet_shutdown+0x189/0x300 __nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp] nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp] nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp] nvme_do_delete_ctrl+0x100/0x10c [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write_iter+0x2c7/0x460 new_sync_write+0x36c/0x610 ? new_sync_read+0x600/0x600 ? lock_acquire+0x1ca/0x480 ? rcu_read_unlock+0x40/0x40 ? lock_is_held_type+0x9a/0x110 vfs_write+0x5c0/0x870 ksys_write+0xf9/0x1d0 ? __ia32_sys_read+0xa0/0xa0 ? lockdep_hardirqs_on_prepare.part.0+0x198/0x340 ? syscall_enter_from_user_mode+0x27/0x70 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 872d26a3 ("nvmet-tcp: add NVMe over TCP target driver") Reported-by:Yi Zhang <yi.zhang@redhat.com> Signed-off-by:
-
Sagi Grimberg authored
The TCP stack can run from process context for a long time so we should disable BH here. Fixes: 3f2304f8 ("nvme-tcp: add NVMe over TCP host driver") Signed-off-by:
-
Hou Pu authored
Return NVME_SC_INVALID_FIELD from discovery controller like normal controller when executing identify or get log page command. Signed-off-by:
Hou Pu <houpu.main@gmail.com> Reviewed-by:
-
Keith Busch authored
We don't need to repeatedly spam the kernel logs with the same warning about unhandled passthrough IO effects. Just one warning is sufficient to observe this condition occurs. Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
-
Keith Busch authored
All nvme transport drivers preallocate an nvme command for each request. Assume to use that command for nvme_setup_cmd() instead of requiring drivers pass a pointer to it. All nvme drivers must initialize the generic nvme_request 'cmd' to point to the transport's preallocated nvme_command. The generic nvme_request cmd pointer had previously been used only as a temporary copy for passthrough commands. Since it now points to the command that gets dispatched, passthrough commands must directly set it up prior to executing the request. Signed-off-by:
Jens Axboe <axboe@kernel.dk> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
-
Keith Busch authored
Except for pci, all the nvme transport drivers allocate a command within the driver's pdu. Align pci with everyone else by allocating the nvme command within pci's pdu and replace the .queue_rq() stack variable with this. Signed-off-by:
-
Noam Gottlieb authored
According to the NVM specifications, the model number size should be 40 bytes (bytes 63:24 of the Identify Controller data structure). Therefore, any attempt to store a value into model_number which exceeds 40 bytes should return an error. Reviewed-by:
Noam Gottlieb <ngottlieb@nvidia.com> Signed-off-by:
-
Chaitanya Kulkarni authored
The function nvmet_ctrl_find_get() accepts out pointer to nvmet_ctrl structure. This function returns the same error value from two places that is :- NVME_SC_CONNECT_INVALID_PARAM | NVME_SC_DNR. Move this to the caller so we can change the return type to nvmet_ctrl. Now that we can changed the return type, instead of taking out pointer to the nvmet_ctrl structure remove that function parameter and return the valid nvmet_ctrl pointer on success and NULL on failure. Also, add and rename the goto labels for more readability with comments. Signed-off-by:
-
Chaitanya Kulkarni authored
Add minimum description of the hosthandle parameter for nvmet_fc_rcv_ls_req() so that we can get rid of the following warning. drivers/nvme//target/fc.c:2009: warning: Function parameter or member 'hosthandle' not described in 'nvmet_fc_rcv_ls_req Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Chaitanya Kulkarni authored
The nvme_fc_rcv_ls_req() function has first argument as pointer to remoteport named portprt, but in the documentation comment that is name is used as remoteport. Fix that to get rid if the compilation warning. drivers/nvme//host/fc.c:1724: warning: Function parameter or member 'portptr' not described in 'nvme_fc_rcv_ls_req' drivers/nvme//host/fc.c:1724: warning: Excess function parameter 'remoteport' description in 'nvme_fc_rcv_ls_req' Signed-off-by:
-
Chaitanya Kulkarni authored
Add a new line in functions nvme_pr_preempt(), nvme_pr_clear(), and nvme_pr_release() after variable declaration which follows the rest of the code in the nvme/host/core.c. No functional change(s) in this patch. Signed-off-by:
-
Chaitanya Kulkarni authored
nvme_clear_request() has a check for flag REQ_DONTPREP and it is called from nvme_init_request() and nvme_setuo_cmd(). The function nvme_init_request() is called from nvme_alloc_request() and nvme_alloc_request_qid(). From these two callers new request is allocated everytime. For newly allocated request RQF_DONTPREP is never set. Since after getting a tag, block layer sets the req->rq_flags == 0 and never sets the REQ_DONTPREP when returning the request :- nvme_alloc_request() blk_mq_alloc_request() blk_mq_rq_ctx_init() rq->rq_flags = 0 <---- nvme_alloc_request_qid() blk_mq_alloc_request_hctx() blk_mq_rq_ctx_init() rq->rq_flags = 0 <---- The block layer does set req->rq_flags but REQ_DONTPREP is not one of them and that is set by the driver. That means we can unconditinally set the REQ_DONTPREP value to the rq->rq_flags when nvme_init_request()->nvme_clear_request() is called from above two callers. Move the check for REQ_DONTPREP from nvme_clear_nvme_request() into nvme_setup_cmd(). This is needed since nvme_alloc_request() now gets called from fast path when NVMeOF target is configured with passthru backend to avoid unnecessary checks in the fast path. Signed-off-by:
-
Chaitanya Kulkarni authored
Since nvmet_setup_passthru() function falls in fast path when called from the NVMeOF passthru backend, make it inline. Signed-off-by:
-
Chaitanya Kulkarni authored
The function nvme_init_ctrl_finish() (formerly nvme_init_identify()) has grown over the period of time about ~200 lines given the size of nvme id ctrl data structure. Move the nvme_id_ctrl data structure related initilzation into helper nvme_init_identify() and call it from nvme_init_ctrl_finish(). When we move the code into nvme_init_identify() change the local variable i from int to unsigned int and remove the duplicate kfree() after nvme_mpath_init() and jump to the label out_free if nvme_mpath_ini() fails. Signed-off-by:
-
Chaitanya Kulkarni authored
This is a prep patch so that we can move the identify data structure related code initialization from nvme_init_identify() into a helper. Rename the function nvmet_init_identify() to nvmet_init_ctrl_finish(). Next patch will move the nvme_id_ctrl related initialization from newly renamed function nvme_init_ctrl_finish() into the nvme_init_identify() helper. Signed-off-by:
-
Kanchan Joshi authored
For passthrough I/O commands, effects are usually to be zero. nvme_passthrough_end() does three checks in futility for this case. Bail out of function-call/checks. Signed-off-by:
Kanchan Joshi <joshi.k@samsung.com> Reviewed-by:
-
Kanchan Joshi authored
Use the proper macro instead of hard-coded value. Signed-off-by:
-
Chaitanya Kulkarni authored
Instead of the using the whitespaces use tab spacing in the nvmet_execute_identify_ns(). Signed-off-by:
-
Chaitanya Kulkarni authored
In nvmet_check_ctrl_status() cmd can be derived from nvmet_req. Remove the local variable cmd in the nvmet_check_ctrl_status() and function parameter cmd for nvmet_check_ctrl_status(). Derive the cmd value from req parameter in the nvmet_check_ctrl_status(). Signed-off-by:
-
Chaitanya Kulkarni authored
Instead of updating the error log page in the caller of the nvmet_alloc_ctrt() update the error log page in the nvmet_alloc_ctrl(). Signed-off-by:
-
Chaitanya Kulkarni authored
In the function nvmet_alloc_ctrl() we assign status value before we call nvmet_fine_get_subsys() to: status = NVME_SC_CONNECT_INVALID_PARAM | NVME_SC_DNR; After we successfully find the subsystem we again set the status value to: status = NVME_SC_CONNECT_INVALID_PARAM | NVME_SC_DNR; Remove the duplicate status assignment value. Signed-off-by:
-
Chaitanya Kulkarni authored
Get rid of a local variable that is not needed and just return the status directly. Signed-off-by:
-
Chaitanya Kulkarni authored
The barriers were added to the nvme_irq() in commit 3a7afd8e ("nvme-pci: remove the CQ lock for interrupt driven queues") to prevent compiler from doing memory optimization for the variabes that were protected previously by spinlock in nvme_irq() at completion queue processing and with queue head check condition. The variable nvmeq->last_cq_head from those checks was removed in the commit f6c4d97b ("nvme/pci: Remove last_cq_head") that was not allwing poll queues from mistakenly triggering the spurious interrupt detection. Remove the barriers which were protecting the updates to the variables. Reported-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
- 29 Mar, 2021 4 commits
-
-
Shixin Liu authored
There's no need to declare a list and then init it manually, just use the LIST_HEAD() macro. Signed-off-by:
Shixin Liu <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20210329095349.4170870-2-liushixin2@huawei.comSigned-off-by:
-
Shixin Liu authored
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Signed-off-by:
-
Christoph Hellwig authored
No implementations left. Signed-off-by:
-
Christoph Hellwig authored
->revalidate_disk is only called during add_disk for pd, but at that point the driver has already set the capacity to the one returned from Identify a little earlier, so this additional update is entirely superflous. Signed-off-by:
-
- 25 Mar, 2021 1 commit
-
-
Jens Axboe authored
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.13/drivers Pull MD updates from Song: "The major changes are: 1. Performance improvement for raid10 discard requests, from Xiao Ni. 2. Fix missing information of /proc/mdstat, from Jan Glauber." * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: Fix missing unused status line of /proc/mdstat md/raid10: improve discard request for far layout md/raid10: improve raid10 discard request md/raid10: pull the code that wait for blocked dev into one function md/raid10: extend r10bio devs to raid disks md: add md_submit_discard_bio() for submitting discard bio
-
- 24 Mar, 2021 8 commits
-
-
Jan Glauber authored
Reading /proc/mdstat with a read buffer size that would not fit the unused status line in the first read will skip this line from the output. So 'dd if=/proc/mdstat bs=64 2>/dev/null' will not print something like: unused devices: <none> Don't return NULL immediately in start() for v=2 but call show() once to print the status line also for multiple reads. Cc: stable@vger.kernel.org Fixes: 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code and interface") Signed-off-by:
Jan Glauber <jglauber@digitalocean.com> Signed-off-by:
Song Liu <songliubraving@fb.com>
-
Xiao Ni authored
For far layout, the discard region is not continuous on disks. So it needs far copies r10bio to cover all regions. It needs a way to know all r10bios have finish or not. Similar with raid10_sync_request, only the first r10bio master_bio records the discard bio. Other r10bios master_bio record the first r10bio. The first r10bio can finish after other r10bios finish and then return the discard bio. Tested-by:
Adrian Huang <ahuang12@lenovo.com> Signed-off-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
-
Xiao Ni authored
Now the discard request is split by chunk size. So it takes a long time to finish mkfs on disks which support discard function. This patch improve handling raid10 discard request. It uses the similar way with patch 29efc390 (md/md0: optimize raid0 discard handling). But it's a little complex than raid0. Because raid10 has different layout. If raid10 is offset layout and the discard request is smaller than stripe size. There are some holes when we submit discard bio to underlayer disks. For example: five disks (disk1 - disk5) D01 D02 D03 D04 D05 D05 D01 D02 D03 D04 D06 D07 D08 D09 D10 D10 D06 D07 D08 D09 The discard bio just wants to discard from D03 to D10. For disk3, there is a hole between D03 and D08. For disk4, there is a hole between D04 and D09. D03 is a chunk, raid10_write_request can handle one chunk perfectly. So the part that is not aligned with stripe size is still handled by raid10_write_request. If reshape is running when discard bio comes and the discard bio spans the reshape position, raid10_write_request is responsible to handle this discard bio. I did a test with this patch set. Without patch: time mkfs.xfs /dev/md0 real4m39.775s user0m0.000s sys0m0.298s With patch: time mkfs.xfs /dev/md0 real0m0.105s user0m0.000s sys0m0.007s nvme3n1 259:1 0 477G 0 disk └─nvme3n1p1 259:10 0 50G 0 part nvme4n1 259:2 0 477G 0 disk └─nvme4n1p1 259:11 0 50G 0 part nvme5n1 259:6 0 477G 0 disk └─nvme5n1p1 259:12 0 50G 0 part nvme2n1 259:9 0 477G 0 disk └─nvme2n1p1 259:15 0 50G 0 part nvme0n1 259:13 0 477G 0 disk └─nvme0n1p1 259:14 0 50G 0 part Reviewed-by:
Coly Li <colyli@suse.de> Reviewed-by:
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by:
-
Xiao Ni authored
The following patch will reuse these logics, so pull the same codes into one function. Tested-by:
-
Xiao Ni authored
Now it allocs r10bio->devs[conf->copies]. Discard bio needs to submit to all member disks and it needs to use r10bio. So extend to r10bio->devs[geo.raid_disks]. Reviewed-by:
-
Xiao Ni authored
Move these logic from raid0.c to md.c, so that we can also use it in raid10.c. Reviewed-by:
-
Davidlohr Bueso authored
This removes the driver on the premise that it has been unused for a long time. This is a better approach compared to changing untestable code nobody cares about in the first place. Similarly, the umem.com website now shows a mere Godaddy parking add. Acked-by:
NeilBrown <neilb@suse.de> Suggested-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Arnd Bergmann authored
The returned string from rsxx_card_state_to_str is 'const', but the other qualifier doesn't change anything here except causing a warning with 'clang -Wextra': drivers/block/rsxx/core.c:393:21: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers] static const char * const rsxx_card_state_to_str(unsigned int state) Fixes: f3791203 ("block: IBM RamSan 70/80 trivial changes.") Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210323215753.281668-1-arnd@kernel.orgSigned-off-by:
-
- 23 Mar, 2021 1 commit
-
-
Michal Simek authored
Sysace IP is no longer used on Xilinx PowerPC 405/440 and Microblaze systems. The driver is not regularly tested and very likely not working for quite a long time that's why remove it. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
- 16 Mar, 2021 1 commit
-
-
Julian Wiedmann authored
Wire up device_driver->dev_groups, so that really_probe() creates the sysfs attributes for us automatically. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20210316094513.2601218-3-sth@linux.ibm.comSigned-off-by:
-
