Merge tag 'arm-ftrace-for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux into devel-stable

ARM: ftrace fixes and cleanups

Make all flavors of ftrace available on all builds, regardless of ISA
choice, unwinder choice or compiler:
- use ADD not POP where possible
- fix a couple of Thumb2 related issues
- enable HAVE_FUNCTION_GRAPH_FP_TEST for robustness
- enable the graph tracer with the EABI unwinder
- avoid clobbering frame pointer registers to make Clang happy

Link: https://lore.kernel.org/linux-arm-kernel/20220203082204.1176734-1-ardb@kernel.org/

This reverts commit ecb108e3.

Clang + Thumb2 with ftrace is now supported.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The SMC calling convention uses R7 as an argument register, which
conflicts with its use as a frame pointer when building in Thumb2 mode.
Given that Clang with ftrace does not permit frame pointers to be
disabled, let's omit this compilation unit from ftrace instrumentation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>

Thumb2 uses R7 rather than R11 as the frame pointer, and even if we
rarely use a frame pointer to begin with when building in Thumb2 mode,
there are cases where it is required by the compiler (Clang when
inserting profiling hooks via -pg)

However, preserving and restoring the frame pointer is risky, as any
unhandled exceptions raised in the mean time will produce a bogus
backtrace, and it would be better not to touch the frame pointer at all.
This is the case even when CONFIG_FRAME_POINTER is not set, as the
unwind directive used by the unwinder may also use R7 or R11 as the
unwind anchor, even if the frame pointer is not managed strictly
according to the frame pointer ABI.

So let's tweak the cacheflush asm code not to clobber R7 or R11 at all,
so that we can drop R7 from the clobber lists of the inline asm blocks
that call these routines, and remove the code that preserves/restores
R11.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

Thumb2 code uses R7 as the frame pointer rather than R11, because the
opcodes to access it are generally shorter.

This means that there are cases where we cannot simply add it to the
clobber list of an asm() block, but need to preserve/restore it
explicitly, or the compiler may complain in some cases (e.g., Clang
builds with ftrace enabled).

Since R11 is not special in that case, clobber it instead, and use it to
preserve/restore the value of R7.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>

Enable the function graph tracer in combination with the EABI unwinder,
so that Thumb2 builds or Clang ARM builds can make use of it.

This involves using the unwinder to locate the return address of an
instrumented function on the stack, so that it can be overridden and
made to refer to the ftrace handling routines that need to be called at
function return.

Given that for these builds, it is not guaranteed that the value of the
link register is stored on the stack, fall back to the stack slot that
will be used by the ftrace exit code to restore LR in the instrumented
function's execution context.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The ftrace graph tracer needs to override the return address of an
instrumented function, in order to install a hook that gets invoked when
the function returns again.

Currently, we only support this when building for ARM using GCC with
frame pointers, as in this case, it is guaranteed that the function will
reload LR from [FP, #-4] in all cases, and we can simply pass that
address to the ftrace code.

In order to support this for configurations that rely on the EABI
unwinder, such as Thumb2 builds, make the unwinder keep track of the
address from which LR was unwound, permitting ftrace to make use of this
in a subsequent patch.

Drop the call to is_kernel_text_address(), which is problematic in terms
of ftrace recursion, given that it may be instrumented itself. The call
is redundant anyway, as no unwind directives will be found unless the PC
points to memory that is known to contain executable code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

Fix the frame pointer handling in the function graph tracer entry and
exit code so we can enable HAVE_FUNCTION_GRAPH_FP_TEST. Instead of using
FP directly (which will have different values between the entry and exit
pieces of the function graph tracer), use the value of SP at entry and
exit, as we can derive the former value from the frame pointer.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Avoid explicit literal loads and instead, use accessor macros that
generate the optimal sequence depending on the architecture revision
being targeted.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Tweak the ftrace return paths to avoid redundant loads of SP, as well as
unnecessary clobbering of IP.

This also fixes the inconsistency of using MOV to perform a function
return, which is sub-optimal on recent micro-architectures but more
importantly, does not perform an interworking return, unlike compiler
generated function returns in Thumb2 builds.

Let's fix this by popping PC from the stack like most ordinary code
does.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Kernel images that are large in comparison to the range of a direct
branch may fail to work as expected with ftrace, as patching a direct
branch to one of the core ftrace routines may not be possible from the
.init.text section, if it is emitted too far away from the normal .text
section.

This is more likely to affect Thumb2 builds, given that its range is
only -/+ 16 MiB (as opposed to ARM which has -/+ 32 MiB), but may occur
in either ISA.

To work around this, add a couple of trampolines to .init.text and
swap these in when the ftrace patching code is operating on callers in
.init.text.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The compiler emitted hook used for ftrace consists of a PUSH {LR} to
preserve the link register, followed by a branch-and-link (BL) to
__gnu_mount_nc. Dynamic ftrace patches away the latter to turn the
combined sequence into a NOP, using a POP {LR} instruction.

This is not necessary, since the link register does not get clobbered in
this case, and simply adding #4 to the stack pointer is sufficient, and
avoids a memory access that may take a few cycles to resolve depending
on the micro-architecture.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Using ADR to take the address of 'ftrace_stub' via a local label
produces an address that has the Thumb bit cleared, which means the
subsequent comparison is guaranteed to fail. Instead, use the badr
macro, which forces the Thumb bit to be set.

Fixes: a3ba87a6 ("ARM: 6316/1: ftrace: add Thumb-2 support")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'arm-vmap-stacks-v6' of git://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux into devel-stable

ARM: support for IRQ and vmap'ed stacks [v6]

This tag covers the changes between the version of vmap'ed + IRQ stacks
support pulled into rmk/devel-stable [0] (which was dropped from v5.17
due to issues discovered too late in the cycle), and my v5 proposed for
the v5.18 cycle [1].

[0] git://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux.git arm-irq-and-vmap-stacks-for-rmk
[1] https://lore.kernel.org/linux-arm-kernel/20220124174744.1054712-1-ardb@kernel.org/

The get_current() and __my_cpu_offset() accessors evaluate to only a
single instruction emitted inline, but due to the size of the asm string
that is created for SMP+v6 configurations, the compiler assumes
otherwise, and may emit the functions out of line instead.

So use __always_inline to avoid this.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

Only SMP systems use the secondary startup path by definition, so there
is no need for SMP conditionals there.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The build bots complain about iop_handle_irq() not being declared so
let's make it static instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Rework the vmalloc_seq handling so it can be used safely under SMP, as
we started using it to ensure that vmap'ed stacks are guaranteed to be
mapped by the active mm before switching to a task, and here we need to
ensure that changes to the page tables are visible to other CPUs when
they observe a change in the sequence count.

Since LPAE needs none of this, fold a check against it into the
vmalloc_seq counter check after breaking it out into a separate static
inline helper.

Given that vmap'ed stacks are now also supported on !SMP configurations,
let's drop the WARN() that could potentially now fire spuriously.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Avoid using R9 in the IRQ handler code, as the entry code uses it for
tsk, and expects it to remain untouched between the IRQ entry and exit
code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Use the SMP_ON_UP patching framework to elide HWCAP_TLS tests from the
context switch and return to userspace code paths, as SMP systems are
guaranteed to have this h/w capability.

At the same time, omit the update of __entry_task if the system is
detected to be UP at runtime, as in that case, the value is never used.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Nathan reports the group relocations go out of range in pathological
cases such as allyesconfig kernels, which have little chance of actually
booting but are still used in validation.

So add a Kconfig symbol for this feature, and make it depend on
!COMPILE_TEST.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

When onlining a CPU, switch to swapper_pg_dir as soon as possible so
that it is guaranteed that the vmap'ed stack is mapped before it is
used.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Nathan reports that the new get_current() and per-CPU offset accessors
may cause problems at build time due to the use of a literal to hold the
address of the respective variables. This is due to the fact that LLD
before v14 does not support the PC-relative group relocations that are
normally used for this, and the fallback relies on literals but does not
emit the literal pools explictly using the .ltorg directive.

./arch/arm/include/asm/current.h:53:6: error: out of range pc-relative fixup value
        asm(LOAD_SYM_ARMV6(%0, __current) : "=r"(cur));
            ^
./arch/arm/include/asm/insn.h:25:2: note: expanded from macro 'LOAD_SYM_ARMV6'
        "       ldr     " #reg ", =" #sym "                     nt"
        ^
<inline asm>:1:3: note: instantiated into assembly here
                ldr     r0, =__current
                ^

Since emitting a literal pool in this particular case is not possible,
let's avoid the LOAD_SYM_ARMV6() entirely, and use the ordinary C
assigment instead.

As it turns out, there are other such cases, and here, using .ltorg to
emit the literal pool within range of the LDR instruction would be
possible due to the presence of an unconditional branch right after it.
Unfortunately, putting .ltorg directives in subsections appears to
confuse the Clang inline assembler, resulting in similar errors even
though the .ltorg is most definitely within range.

So let's fix this by emitting the literal explicitly, and not rely on
the assembler to figure this out. This means we have move the fallback
out of the LOAD_SYM_ARMV6() macro and into the callers.

Link: https://github.com/ClangBuiltLinux/linux/issues/1551

Fixes: 9c46929e ("ARM: implement THREAD_INFO_IN_TASK for uniprocessor systems")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

There are several reports about the new vmap'ed stacks code breaking
suspend/resume on Exynos, Renesas and Tegra SMP platforms. While this is
under investigation, let's disable the vmap'ed stacks feature for the
time being for SMP configurations that have suspend/resume enabled.

[0] https://lore.kernel.org/linux-arm-kernel/20211122092816.2865873-8-ardb@kernel.org/

Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Merge tag 'arm-irq-and-vmap-stacks-for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux into devel-stable

ARM: support for IRQ and vmap'ed stacks

This PR covers all the work related to implementing IRQ stacks and
vmap'ed stacks for all 32-bit ARM systems that are currently supported
by the Linux kernel, including RiscPC and Footbridge. It has been
submitted for review in three different waves:
- IRQ stacks support for v7 SMP systems [0],
- vmap'ed stacks support for v7 SMP systems[1],
- extending support for both IRQ stacks and vmap'ed stacks for all
  remaining configurations, including v6/v7 SMP multiplatform kernels
  and uniprocessor configurations including v7-M [2]

[0] https://lore.kernel.org/linux-arm-kernel/20211115084732.3704393-1-ardb@kernel.org/
[1] https://lore.kernel.org/linux-arm-kernel/20211122092816.2865873-1-ardb@kernel.org/
[2] https://lore.kernel.org/linux-arm-kernel/20211206164659.1495084-1-ardb@kernel.org/

Enable support for IRQ stacks on !MMU, and add the code to the IRQ entry
path to switch to the IRQ stack if not running from it already.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M

On UP systems, only a single task can be 'current' at the same time,
which means we can use a global variable to track it. This means we can
also enable THREAD_INFO_IN_TASK for those systems, as in that case,
thread_info is accessed via current rather than the other way around,
removing the need to store thread_info at the base of the task stack.
This, in turn, permits us to enable IRQ stacks and vmap'ed stacks on UP
systems as well.

To partially mitigate the performance overhead of this arrangement, use
a ADD/ADD/LDR sequence with the appropriate PC-relative group
relocations to load the value of current when needed. This means that
accessing current will still only require a single load as before,
avoiding the need for a literal to carry the address of the global
variable in each function. However, accessing thread_info will now
require this load as well.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M

Defer TPIDURO updates for user space until exit also for CPU_V6+SMP
configurations so that we can decide at runtime whether to use it to
carry the current pointer, provided that we are running on a CPU that
actually implements this register. This is needed for
THREAD_INFO_IN_TASK support for UP systems, which requires that all SMP
capable systems use the TPIDRURO based access to 'current' as the only
remaining alternative will be a global variable which only works on UP.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M

Enable the use of the TLS register to hold the 'current' pointer also on
non-SMP configurations that target v6k or later CPUs. This will permit
the use of THREAD_INFO_IN_TASK as well as IRQ stacks and vmap'ed stacks
for such configurations.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M

Permit the use of the TPIDRPRW system register for carrying the per-CPU
offset in generic SMP configurations that also target non-SMP capable
ARMv6 cores. This uses the SMP_ON_UP code patching framework to turn all
TPIDRPRW accesses into reads/writes of entry #0 in the __per_cpu_offset
array.

While at it, switch over some existing direct TPIDRPRW accesses in asm
code to invocations of a new helper that is patched in the same way when
necessary.

Note that CPU_V6+SMP without SMP_ON_UP results in a kernel that does not
boot on v6 CPUs without SMP extensions, so add this dependency to
Kconfig as well.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M

We will be adding variable loads to various hot paths, so it makes sense
to add a helper macro that can load variables from asm code without the
use of literal pool entries. On v7 or later, we can simply use MOVW/MOVT
pairs, but on earlier cores, this requires a bit of hackery to emit a
instruction sequence that implements this using a sequence of ADD/LDR
instructions.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M

Add support for the R_ARM_ALU_PC_Gn_NC and R_ARM_LDR_PC_G2 group
relocations [0] so we can use them in modules. These will be used to
load the current task pointer from a global variable without having to
rely on a literal pool entry to carry the address of this variable,
which may have a significant negative impact on cache utilization for
variables that are used often and in many different places, as each
occurrence will result in a literal pool entry and therefore a line in
the D-cache.

[0] 'ELF for the ARM architecture'
    https://github.com/ARM-software/abi-aa/releasesAcked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M

Tweak the UP stack protector handling code so that the thread info
pointer is preserved in R7 until set_current is called. This is needed
for a subsequent patch that implements THREAD_INFO_IN_TASK and
set_current for UP as well.

This also means we will prefer the per-task protector on UP systems that
implement the thread ID registers, so tweak the preprocessor
conditionals to reflect this.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M

Rather then restructuring the ARMv7M entrly logic per TODO, just move
NVIC to GENERIC_IRQ_MULTI_HANDLER.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M

The last user of arch_irq_handler_default is gone now, so the
entry-macro-multi.S file and all references to mach/entry-macro.S can
be removed, as well as the asm_do_IRQ() entrypoint into the interrupt
handling routines implemented in C.

Note: The ARMv7-M entry still uses its own top-level IRQ entry, calling
nvic_handle_irq() from assembly. This could be changed to go through
generic_handle_arch_irq() as well, but it's unclear to me if there are
any benefits.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: keep irq_handler macro as it carries all the IRQ stack handling]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

iop32x uses the entry-macro.S file for both the IRQ entry and for
hooking into the arch_ret_to_user code path. This is done because the
cp6 registers have to be enabled before accessing any of the interrupt
controller registers but have to be disabled when running in user space.

There is also a lazy-enable logic in cp6.c, but during a hardirq, we
know it has to be enabled.

Both the cp6-enable code and the code to read the IRQ status can be
lifted into the normal generic_handle_arch_irq() path, but the
cp6-disable code has to remain in the user return code. As nothing
other than iop32x uses this hook, just open-code it there with an
ifdef for the platform that can eventually be removed when iop32x
has reached the end of its life.

The cp6-enable path in the IRQ entry has an extra cp_wait barrier that
the trap version does not have, but it is harmless to do it in both
cases to simplify the logic here at the cost of a few extra cycles
for the trap.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M

iop32x is one of the last platforms to use IRQ 0, and this has apparently
stopped working in a 2014 cleanup without anyone noticing. This interrupt
is used for the DMA engine, so most likely this has not actually worked
in the past 7 years, but it's also not essential for using this board.

I'm splitting out this change from my GENERIC_IRQ_MULTI_HANDLER
conversion so it can be backported if anyone cares.

Fixes: a71b092a ("ARM: Convert handle_IRQ to use __handle_domain_irq")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: take +1 offset into account in mask/unmask and init as well]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Footbridge still uses the classic IRQ entry path in assembler,
but this is easily converted into an equivalent C version.

In this case, the correlation between IRQ numbers and bits in
the status register is non-obvious, and the priorities are
handled by manually checking each bit in a static order,
re-reading the status register after each handled event.

I moved the code into the new file and edited the syntax without
changing this sequence to keep the behavior as close as possible
to what it traditionally did.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

This is one of the last platforms using the old entry path.
While this code path is spread over a few files, it is fairly
straightforward to convert it into an equivalent C version,
leaving the existing algorithm and all the priority handling
the same.

Unlike most irqchip drivers, this means reading the status
register(s) in a loop and always handling the highest-priority
irq first.

The IOMD_IRQREQC and IOMD_IRQREQD registers are not actaully
used here, but I left the code in place for the time being,
to keep the conversion as direct as possible. It could be
removed in a cleanup on top.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: drop obsolete IOMD_IRQREQC/IOMD_IRQREQD handling]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M

IOMD_IRQREQC nor IOMD_IRQREQD are ever defined, so any conditionally
compiled code that depends on them is dead code, and can be removed.
Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>