- 07 Feb, 2018 32 commits
-
-
Dou Liyang authored
commit 9471eee9 The spectre_v2 option 'auto' does not check whether CONFIG_RETPOLINE is enabled. As a consequence it fails to emit the appropriate warning and sets feature flags which have no effect at all. Add the missing IS_ENABLED() check. Fixes: da285121 ("x86/spectre: Add boot time option to select Spectre v2 mitigation") Signed-off-by:
Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: ak@linux.intel.com Cc: peterz@infradead.org Cc: Tomohiro <misono.tomohiro@jp.fujitsu.com> Cc: dave.hansen@intel.com Cc: bp@alien8.de Cc: arjan@linux.intel.com Cc: dwmw@amazon.co.uk Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/f5892721-7528-3647-08fb-f8d10e65ad87@cn.fujitsu.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
William Grant authored
commit 55f49fcb Since commit 92a0f81d ("x86/cpu_entry_area: Move it out of the fixmap"), i386's CPU_ENTRY_AREA has been mapped to the memory area just below FIXADDR_START. But already immediately before FIXADDR_START is the FIX_BTMAP area, which means that early_ioremap can collide with the entry area. It's especially bad on PAE where FIX_BTMAP_BEGIN gets aligned to exactly match CPU_ENTRY_AREA_BASE, so the first early_ioremap slot clobbers the IDT and causes interrupts during early boot to reset the system. The overlap wasn't a problem before the CPU entry area was introduced, as the fixmap has classically been preceded by the pkmap or vmalloc areas, neither of which is used until early_ioremap is out of the picture. Relocate CPU_ENTRY_AREA to below FIX_BTMAP, not just below the permanent fixmap area. Fixes: commit 92a0f81d ("x86/cpu_entry_area: Move it out of the fixmap") Signed-off-by:
William Grant <william.grant@canonical.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 830c1e3d With the following fix: 2a0098d7 ("objtool: Fix seg fault with gold linker") ... a seg fault was avoided, but the original seg fault condition in objtool wasn't fixed. Replace the seg fault with an error message. Suggested-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/dc4585a70d6b975c99fc51d1957ccdde7bd52f3a.1517284349.git.jpoimboe@redhat.comSigned-off-by:
-
Josh Poimboeuf authored
commit 17bc3391 Now that the previous patch gave objtool the ability to read retpoline alternatives, it shows a new warning: arch/x86/entry/entry_64.o: warning: objtool: .entry_trampoline: don't know how to handle alternatives at end of section This is due to the JMP_NOSPEC in entry_SYSCALL_64_trampoline(). Previously, objtool ignored this situation because it wasn't needed, and it would have required a bit of extra code. Now that this case exists, add proper support for it. Signed-off-by:
-
Josh Poimboeuf authored
commit a845c7cf Currently objtool requires all retpolines to be: a) patched in with alternatives; and b) annotated with ANNOTATE_NOSPEC_ALTERNATIVE. If you forget to do both of the above, objtool segfaults trying to dereference a NULL 'insn->call_dest' pointer. Avoid that situation and print a more helpful error message: quirks.o: warning: objtool: efi_delete_dummy_variable()+0x99: unsupported intra-function call quirks.o: warning: objtool: If this is a retpoline, please patch it in with alternatives and annotate it with ANNOTATE_NOSPEC_ALTERNATIVE. Future improvements can be made to make objtool smarter with respect to retpolines, but this is a good incremental improvement for now. Reported-and-tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Paolo Bonzini authored
commit f21f165e Group together the calls to alloc_vmcs and loaded_vmcs_init. Soon we'll also allocate an MSR bitmap there. Cc: stable@vger.kernel.org # prereq for Spectre mitigation Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jim Mattson authored
commit de3a0021 The potential performance advantages of a vmcs02 pool have never been realized. To simplify the code, eliminate the pool. Instead, a single vmcs02 is allocated per VCPU when the VCPU enters VMX operation. Cc: stable@vger.kernel.org # prereq for Spectre mitigation Signed-off-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Mark Kanda <mark.kanda@oracle.com> Reviewed-by:
Ameya More <ameya.more@oracle.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Jesse Chan authored
commit 0cab20ce upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in sound/soc/codecs/snd-soc-pcm512x-spi.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by:
Jesse Chan <jc@linux.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Jesse Chan authored
commit 0b9335cb upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/pinctrl/pxa/pinctrl-pxa2xx.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
commit 9a0ebbc9 upstream. The module license checker complains about these two so just fix it up. They are both GPLv2, both written by me or using code I extracted while refactoring from the GPLv2 drivers. Cc: Randy Dunlap <rdunlap@infradead.org> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Jesse Chan authored
commit 09c479f7 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/auxdisplay/img-ascii-lcd.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Borislav Petkov authored
commit 64e16720 Make it all a function which does the WRMSR instead of having a hairy inline asm. [dwmw2: export it, fix CONFIG_RETPOLINE issues] Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
Borislav Petkov authored
commit 1dde7415 Simplify it to call an asm-function instead of pasting 41 insn bytes at every call site. Also, add alignment to the macro as suggested here: https://support.google.com/faqs/answer/7625886 [dwmw2: Clean up comments, let it clobber %ebx and just tell the compiler] Signed-off-by:
-
David Woodhouse authored
commit 2961298e We want to expose the hardware features simply in /proc/cpuinfo as "ibrs", "ibpb" and "stibp". Since AMD has separate CPUID bits for those, use them as the user-visible bits. When the Intel SPEC_CTRL bit is set which indicates both IBRS and IBPB capability, set those (AMD) bits accordingly. Likewise if the Intel STIBP bit is set, set the AMD STIBP that's used for the generic hardware capability. Hide the rest from /proc/cpuinfo by putting "" in the comments. Including RETPOLINE and RETPOLINE_AMD which shouldn't be visible there. There are patches to make the sysfs vulnerabilities information non-readable by non-root, and the same should apply to all information about which mitigations are actually in use. Those *shouldn't* appear in /proc/cpuinfo. The feature bit for whether IBPB is actually used, which is needed for ALTERNATIVEs, is renamed to X86_FEATURE_USE_IBPB. Originally-by:
-
Thomas Gleixner authored
commit e383095c If sysfs is disabled and RETPOLINE not defined: arch/x86/kernel/cpu/bugs.c:97:13: warning: ‘spectre_v2_bad_module’ defined but not used [-Wunused-variable] static bool spectre_v2_bad_module; Hide it. Fixes: caf7501a ("module/retpoline: Warn about missing retpoline in module") Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Borislav Petkov authored
commit 55fa19d3 Make [ 0.031118] Spectre V2 mitigation: Mitigation: Full generic retpoline into [ 0.031118] Spectre V2: Mitigation: Full generic retpoline to reduce the mitigation mitigations strings. Signed-off-by:
-
Borislav Petkov authored
commit 7a32fc51 ... to adhere to the _ASM_X86_ naming scheme. No functional change. Signed-off-by:
-
Borislav Petkov authored
commit 0e6c16c6 After commit ad67b74d ("printk: hash addresses printed with %p") pointers are being hashed when printed. However, this makes the alternative debug output completely useless. Switch to %px in order to see the unadorned kernel pointers. Signed-off-by:
-
David Woodhouse authored
commit 20ffa1ca Expose indirect_branch_prediction_barrier() for use in subsequent patches. [ tglx: Add IBPB status to spectre_v2 sysfs file ] Co-developed-by:
KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by:
-
David Woodhouse authored
commit a5b29663 This doesn't refuse to load the affected microcodes; it just refuses to use the Spectre v2 mitigation features if they're detected, by clearing the appropriate feature bits. The AMD CPUID bits are handled here too, because hypervisors *may* have been exposing those bits even on Intel chips, for fine-grained control of what's available. It is non-trivial to use x86_match_cpu() for this table because that doesn't handle steppings. And the approach taken in commit bd9240a1 almost made me lose my lunch. Signed-off-by:
-
David Woodhouse authored
commit fec9434a Also, for CPUs which don't speculate at all, don't report that they're vulnerable to the Spectre variants either. Leave the cpu_no_meltdown[] match table with just X86_VENDOR_AMD in it for now, even though that could be done with a simple comparison, on the assumption that we'll have more to add. Based on suggestions from Dave Hansen and Alan Cox. Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Cc: gnomes@lxorguk.ukuu.org.uk Cc: ak@linux.intel.com Cc: ashok.raj@intel.com Cc: karahmed@amazon.de Cc: arjan@linux.intel.com Cc: torvalds@linux-foundation.org Cc: peterz@infradead.org Cc: bp@alien8.de Cc: pbonzini@redhat.com Cc: tim.c.chen@linux.intel.com Cc: gregkh@linux-foundation.org Link: https://lkml.kernel.org/r/1516896855-7642-6-git-send-email-dwmw@amazon.co.ukSigned-off-by:
-
David Woodhouse authored
commit 1e340c60 Add MSR and bit definitions for SPEC_CTRL, PRED_CMD and ARCH_CAPABILITIES. See Intel's 336996-Speculative-Execution-Side-Channel-Mitigations.pdf Signed-off-by:
-
David Woodhouse authored
commit 5d10cbc9 AMD exposes the PRED_CMD/SPEC_CTRL MSRs slightly differently to Intel. See http://lkml.kernel.org/r/2b3e25cc-286d-8bd0-aeaf-9ac4aae39de8@amd.comSigned-off-by:
-
David Woodhouse authored
commit fc67dd70 Add three feature bits exposed by new microcode on Intel CPUs for speculation control. Signed-off-by:
-
David Woodhouse authored
commit 95ca0ee8 This is a pure feature bits leaf. There are two AVX512 feature bits in it already which were handled as scattered bits, and three more from this leaf are going to be added for speculation control features. Signed-off-by:
-
Andi Kleen authored
commit caf7501a There's a risk that a kernel which has full retpoline mitigations becomes vulnerable when a module gets loaded that hasn't been compiled with the right compiler or the right option. To enable detection of that mismatch at module load time, add a module info string "retpoline" at build time when the module was compiled with retpoline support. This only covers compiled C source, but assembler source or prebuilt object files are not checked. If a retpoline enabled kernel detects a non retpoline protected module at load time, print a warning and report it in the sysfs vulnerability file. [ tglx: Massaged changelog ] Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Peter Zijlstra authored
commit c940a3fb Replace indirect call with CALL_NOSPEC. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Peter Zijlstra authored
commit 1a29b5b7 Replace the indirect calls with CALL_NOSPEC. Signed-off-by:
-
Waiman Long authored
commit 1df37383 It doesn't make sense to have an indirect call thunk with esp/rsp as retpoline code won't work correctly with the stack pointer register. Removing it will help compiler writers to catch error in case such a thunk call is emitted incorrectly. Fixes: 76b04384 ("x86/retpoline: Add initial retpoline support") Suggested-by:
Jeff Law <law@redhat.com> Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
-
Michael Ellerman authored
commit 236003e6 upstream. Expose the state of the RFI flush (enabled/disabled) via debugfs, and allow it to be enabled/disabled at runtime. eg: $ cat /sys/kernel/debug/powerpc/rfi_flush 1 $ echo 0 > /sys/kernel/debug/powerpc/rfi_flush $ cat /sys/kernel/debug/powerpc/rfi_flush 0 Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Michael Ellerman authored
commit fd6e440f upstream. The recent commit 87590ce6 ("sysfs/cpu: Add vulnerability folder") added a generic folder and set of files for reporting information on CPU vulnerabilities. One of those was for meltdown: /sys/devices/system/cpu/vulnerabilities/meltdown This commit wires up that file for 64-bit Book3S powerpc. For now we default to "Vulnerable" unless the RFI flush is enabled. That may not actually be true on all hardware, further patches will refine the reporting based on the CPU/platform etc. But for now we default to being pessimists. Signed-off-by:
-
Liu, Changcheng authored
commit 4cc90b4c upstream. faddr2line hit var unbound error when CROSS_COMPILE isn't set since nounset option is set in bash script. Link: http://lkml.kernel.org/r/20171206013022.GA83929@sofia Fixes: 95a87982 ("scripts/faddr2line: extend usage on generic arch") Signed-off-by:
Liu Changcheng <changcheng.liu@intel.com> Reported-by:
Richard Weinberger <richard.weinberger@gmail.com> Reviewed-by:
Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: NeilBrown <neilb@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 03 Feb, 2018 8 commits
-
-
Greg Kroah-Hartman authored
-
Matthew Garrett authored
commit a5c03c31 upstream. Some distributions have turned on the reset attack mitigation feature, which is designed to force the platform to clear the contents of RAM if the machine is shut down uncleanly. However, in order for the platform to be able to determine whether the shutdown was clean or not, userspace has to be configured to clear the MemoryOverwriteRequest flag on shutdown - otherwise the firmware will end up clearing RAM on every reboot, which is unnecessarily time consuming. Add some additional clarity to the kconfig text to reduce the risk of systems being configured this way. Signed-off-by:
Matthew Garrett <mjg59@google.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Dmitry Torokhov authored
commit a1ab6902 upstream. We want to free memory reserved for interrupt mask handling only after we free functions, as function drivers might want to mask interrupts. This is needed for the followup patch to the F03 that would implement unmasking and masking interrupts from the serio pass-through port open() and close() methods. Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 6abe534f upstream. Currently we register the pass-through serio port when we probe the F03 RMI function, and then, in sensor configure phase, we unmask interrupts. Unfortunately this is too late, as other drivers are free probe devices attached to the serio port as soon as it is probed. Because interrupts are masked, the IO times out, which may result in not being able to detect trackpoints on the pass-through port. To fix the issue we implement open() and close() methods for the pass-through serio port and unmask interrupts from there. We also move creation of the pass-through port form probe to configure stage, as RMI driver does not enable transport interrupt until all functions are probed (we should change this, but this is a separate topic). We also try to clear the pending data before unmasking interrupts, because some devices like to spam the system with multiple 0xaa 0x00 announcements, which may interfere with us trying to query ID of the device. Fixes: c5e8848f ("Input: synaptics-rmi4 - add support for F03") Reviewed-by:
-
Wei Yongjun authored
commit a5e19233 upstream. Add the missing unlock before return from function config_num_requests_store() in the error handling case. Fixes: c92316bf ("test_firmware: add batched firmware tests") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Narcisa Ana Maria Vasile authored
commit 8f114acd upstream. in_concentration_raw should report, according to sysfs-bus-iio documentation, a "Raw (unscaled no offset etc.) percentage reading of a substance." Modify scale to convert from ppm/ppb to percentage: 1 ppm = 0.0001% 1 ppb = 0.0000001% There is no offset needed to convert the ppm/ppb to percentage, so remove offset from IIO_CONCENTRATION (IIO_MOD_CO2) channel. Cc'd stable to reduce chance of userspace breakage in the long run as we fix this wrong bit of ABI usage. Signed-off-by:
Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com> Reviewed-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Fabrice Gasnier authored
commit 04e491ca upstream. By default, watermark is set to '1'. Watermark is used to fine tune cyclic dma buffer period. In case watermark is left untouched (e.g. 1) and several channels are being scanned, buffer period is wrongly set (e.g. to 1 sample). As a consequence, data is never pushed to upper layer. Fix buffer period size, by taking scan channels number into account. Fixes: 2763ea05 ("iio: adc: stm32: add optional dma support") Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
-
Stefan Agner authored
commit d593574a upstream. Since clocks are disabled except during message transfer clocks are also disabled when spi_imx_remove gets called. Accessing registers leads to a freeeze at least on a i.MX 6ULL. Enable clocks before disabling accessing the MXC_CSPICTRL register. Fixes: 9e556dcc ("spi: spi-imx: only enable the clocks when we start to transfer a message") Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
