- 10 Feb, 2012 1 commit
-
-
Lee Jones authored
Traditionally, any System-on-Chip based platform creates a flat list of platform_devices directly under /sys/devices/platform. In order to give these some better structure, this introduces a new bus type for soc_devices that are registered with the new soc_device_register() function. All devices that are on the same chip should then be registered as child devices of the soc device. The soc bus also exports a few standardised device attributes which allow user space to query the specific type of soc. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 09 Feb, 2012 8 commits
-
-
Greg Kroah-Hartman authored
This cuts down on the boilerplate code. Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Acked-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This patch introduces the module_pci_driver macro which is a convenience macro for PCI driver modules similar to module_platform_driver. It is intended to be used by drivers which init/exit section does nothing but register/unregister the PCI driver. By using this macro it is possible to eliminate a few lines of boilerplate code per PCI driver. Based on work done by Lars-Peter Clausen <lars@metafoo.de> for other busses (i2c and spi). Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Mark Brown authored
Direct inclusion of the asm header has long been deprecated by the introduction of gpiolib. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
K. Y. Srinivasan authored
The current code arbirarily limited the number of CPUs the guest could have. Change that so that we can support the maximum number of CPUs the guest can support. While we use NR_CPUS to size the per-cpu state all we are allocating based on NR_CPUS are the pointers to per-cpu state that will be allocatted in the context of the initializing CPU. This patch triggers a checkpatch warning for the usage of NR_CPU and since all we are allocating a couple of pointers per CPU, it should be ok. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
K. Y. Srinivasan authored
Now, cleanup the user/kernel KVP protocol by using the same structure definition that is used for host/guest KVP protocol. This simplifies the code. Signed-off-by:
-
K. Y. Srinivasan authored
Now use hyperv.h to get the KVP defines in the KVP user-mode code. Signed-off-by:
-
K. Y. Srinivasan authored
Now cleanup the hyperv.h with regards to KVP definitions. Signed-off-by:
-
Yinghai Lu authored
When checking driver-core tree, found crazying warnings on my setups. [ 216.025849] calling acpi_processor_init+0x0/0x81 @ 1 [ 216.045332] ACPI: Requesting acpi_cpufreq [ 216.047454] Monitor-Mwait will be used to enter C-1 state [ 216.047912] Monitor-Mwait will be used to enter C-3 state [ 216.065270] ACPI: acpi_idle registered with cpuidle [ 216.068241] kobject (ffff8870364a1940): tried to init an initialized object, something is seriously wrong. [ 216.085287] Pid: 1, comm: swapper/0 Not tainted 3.3.0-rc2-tip-yh-02428-ge663840-dirty #247 [ 216.105041] Call Trace: [ 216.105192] [<ffffffff813a9c06>] kobject_init+0x33/0x83 [ 216.124880] [<ffffffff813aa1f8>] kobject_init_and_add+0x23/0x57 [ 216.125158] [<ffffffff819f3a08>] cpuidle_add_sysfs+0x49/0x62 [ 216.144850] [<ffffffff819f2a28>] __cpuidle_register_device+0xe6/0x10e [ 216.145182] [<ffffffff819f2ea4>] cpuidle_register_device+0x25/0x4d [ 216.164912] [<ffffffff81cb5774>] acpi_processor_power_init+0x13e/0x16c [ 216.165205] [<ffffffff81427620>] ? acpi_processor_get_throttling_info+0x128/0x158 [ 216.185012] [<ffffffff81c68ae5>] acpi_processor_start+0x62/0x11d [ 216.204861] [<ffffffff81cb55ff>] acpi_processor_add+0x1b0/0x1e7 [ 216.205144] [<ffffffff81402a7e>] acpi_device_probe+0x4e/0x11c [ 216.225063] [<ffffffff8148f0e7>] really_probe+0x99/0x126 [ 216.225328] [<ffffffff8148f2a3>] driver_probe_device+0x3b/0x56 [ 216.244846] [<ffffffff8148f31d>] __driver_attach+0x5f/0x82 [ 216.245101] [<ffffffff8148f2be>] ? driver_probe_device+0x56/0x56 [ 216.264668] [<ffffffff8148db80>] bus_for_each_dev+0x5c/0x88 [ 216.264942] [<ffffffff8148eea7>] driver_attach+0x1e/0x20 [ 216.284639] [<ffffffff8148eaec>] bus_add_driver+0xca/0x21d [ 216.284903] [<ffffffff81095827>] ? local_clock+0xf/0x3c [ 216.304580] [<ffffffff82814177>] ? acpi_fan_init+0x18/0x18 [ 216.304849] [<ffffffff8148f79b>] driver_register+0x91/0xfe [ 216.324545] [<ffffffff82814177>] ? acpi_fan_init+0x18/0x18 [ 216.324813] [<ffffffff81403705>] acpi_bus_register_driver+0x43/0x45 [ 216.344563] [<ffffffff828141a7>] acpi_processor_init+0x30/0x81 [ 216.344845] [<ffffffff82814177>] ? acpi_fan_init+0x18/0x18 [ 216.364590] [<ffffffff810001e7>] do_one_initcall+0x57/0x134 [ 216.364868] [<ffffffff827e6f8c>] kernel_init+0x146/0x1c0 [ 216.384512] [<ffffffff81d03aa4>] kernel_thread_helper+0x4/0x10 [ 216.384819] [<ffffffff81cfbb5d>] ? retint_restore_args+0xe/0xe [ 216.404578] [<ffffffff827e6e46>] ? start_kernel+0x3ab/0x3ab [ 216.424530] [<ffffffff81d03aa0>] ? gs_change+0xb/0xb [ 216.424793] ------------[ cut here ]------------ [ 216.425038] WARNING: at fs/sysfs/dir.c:502 sysfs_add_one+0x97/0xab() [ 216.444480] Hardware name: Sun Fire X4800 [ 216.444668] sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0/cpuidle' ... It turns out acpi_processor_power_init() get called two time in acpi_processor_add and acpi_processor_start. Found several lines are duplicated in those two functions even related commit move them. The related patches are ok. Not sure how it could happen, looks like git problem. -v2: add back acpi_processor_load_module(pr) to acpi_processor_load_start Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
Thomas Renninger <trenn@suse.de> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
-
- 02 Feb, 2012 4 commits
-
-
Alan Cox authored
Someone forgot to test this one it seems. Signed-off-by:
Alan Cox <alan@linux.intel.com> Acked-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
K. Y. Srinivasan authored
In preparation for consolidating all KVP related defines into a single header file that both the kernel and user level components can use, move the contents of hv_kvp.h into hyperv.h. Signed-off-by:
-
K. Y. Srinivasan authored
The current KVP code carries some private connector related defines. Update connector.h to have all the KVP defines. As part of this patch get rid of some unused defines. Signed-off-by:
-
Greg Kroah-Hartman authored
This was done to resolve a merge and build problem with the drivers/acpi/processor_driver.c file. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 31 Jan, 2012 5 commits
-
-
Linus Torvalds authored
-
Eric W. Biederman authored
This fixes a bug introduced with sysfs name hashes where renaming a network device appears to succeed but silently makes the sysfs files for that network device inaccessible. In at least one configuration this bug has stopped networking from coming up during boot. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Tested-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
git://github.com/prasad-joshi/logfs_upstreamLinus Torvalds authored
There are few important bug fixes for LogFS * tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream: Logfs: Allow NULL block_isbad() methods logfs: Grow inode in delete path logfs: Free areas before calling generic_shutdown_super() logfs: remove useless BUG_ON MAINTAINERS: Add Prasad Joshi in LogFS maintiners logfs: Propagate page parameter to __logfs_write_inode logfs: set superblock shutdown flag after generic sb shutdown logfs: take write mutex lock during fsync and sync logfs: Prevent memory corruption logfs: update page reference count for pined pages Fix up conflict in fs/logfs/dev_mtd.c due to semantic change in what "mtd->block_isbad" means in commit f2933e86: "Logfs: Allow NULL block_isbad() methods" clashing with the abstraction changes in the commits 7086c19d: "mtd: introduce mtd_block_isbad interface" and d58b27ed: "logfs: do not use 'mtd->block_isbad' directly". This resolution takes the semantics from commit f2933e86, and just makes mtd_block_isbad() return zero (false) if the 'block_isbad' function is NULL. But that also means that now "mtd_can_have_bb()" always returns 0. Now, "mtd_block_markbad()" will obviously return an error if the low-level driver doesn't support bad blocks, so this is somewhat non-symmetric, but it actually makes sense if a NULL "block_isbad" function is considered to mean "I assume that all my blocks are always good".
-
Linus Torvalds authored
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776F hwmon: (sht15) fix bad error code MAINTAINERS: Drop maintainer for MAX1668 hwmon driver MAINTAINERS: Add hwmon entries for Wolfson hwmon: (f71805f) Fix clamping of temperature limits
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Here are some fixes to the pin control system that has accumulated since -rc1. Mainly Tony Lindgren fixed the module load/unload logic and the rest are minor fixes and documentation. * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: add checks for empty function names pinctrl: fix pinmux_hog_maps when ctrl_dev_name is not set pinctrl: fix some pinmux typos pinctrl: free debugfs entries when unloading a pinmux driver pinctrl: unbreak error messages Documentation/pinctrl: fix a few syntax errors in code examples pinctrl: fix pinconf_pins_show iteration
-
- 30 Jan, 2012 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Here are some tty/serial patches for 3.3-rc1 Big thing here is the movement of the 8250 serial drivers to their own directory, now that the patch churn has calmed down. Other than that, only minor stuff (omap patches were reverted as they were found to be wrong), and another broken driver removed from the system. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Here are a bunch of USB patches for 3.3-rc1. Nothing major, largest thing here is the removal of some drivers that did not work at all. Other than that, the normal collection of bugfixes and new device ids. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
1) Setting link attributes can modify the size of the attributes that would be reported on a subsequent getlink netlink operation, therefore min_ifinfo_dump_size needs to be adjusted. From Stefan Gula. 2) Resegmentation of TSO frames while trimming can violate invariants expected by callers, namely that the number of segments can only stay the same or decrease, never increase. If MSS changes, however, we can trim data but then end up with more segments. Fix this by only segmenting to the MSS already recorded in the SKB. That's the simplest fix for now and if we want to get more fancy in the future that's a more involved change. This probably explains some retransmit counter inaccuracies. From Neal Cardwell. 3) Fix too-many-wakeups in POLL with AF_UNIX sockets, from Eric Dumazet. 4) Fix CAIF crashes wrt. namespace handling. From Eric Dumazet and Eric W. Biederman. 5) TCP port selection fixes from Flavio Leitner. 6) More socket memory cgroup build fixes in certain randonfig situations. From Glauber Costa. 7) Fix TCP memory sysctl regression reported by Ingo Molnar, also from Glauber Costa. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: af_unix: fix EPOLLET regression for stream sockets tcp: fix tcp_trim_head() to adjust segment count with skb MSS net/tcp: Fix tcp memory limits initialization when !CONFIG_SYSCTL net caif: Register properly as a pernet subsystem. netns: Fail conspicously if someone uses net_generic at an inappropriate time. net: explicitly add jump_label.h header to sock.h net: RTNETLINK adjusting values of min_ifinfo_dump_size ipv6: Fix ip_gre lockless xmits. xen-netfront: correct MAX_TX_TARGET calculation. netns: fix net_alloc_generic() tcp: bind() optimize port allocation tcp: bind() fix autoselection to share ports l2tp: l2tp_ip - fix possible oops on packet receive iwlwifi: fix PCI-E transport "inta" race mac80211: set bss_conf.idle when vif is connected mac80211: update oper_channel on ibss join
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
This fixes an integration issue with the regulator device tree bindings which shook out in -rc. The bindings were overly enthusiatic when deciding to set a voltage on a regulator and would try to set zero volts on an unconfigured regulator which isn't supported. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Set apply_uV only when min and max voltages are defined
-
Eric Dumazet authored
Commit 0884d7aa (AF_UNIX: Fix poll blocking problem when reading from a stream socket) added a regression for epoll() in Edge Triggered mode (EPOLLET) Appropriate fix is to use skb_peek()/skb_unlink() instead of skb_dequeue(), and only call skb_unlink() when skb is fully consumed. This remove the need to requeue a partial skb into sk_receive_queue head and the extra sk->sk_data_ready() calls that added the regression. This is safe because once skb is given to sk_receive_queue, it is not modified by a writer, and readers are serialized by u->readlock mutex. This also reduce number of spinlock acquisition for small reads or MSG_PEEK users so should improve overall performance. Reported-by:
Nick Mathewson <nickm@freehaven.net> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Alexey Moiseytsev <himeraster@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
This commit fixes tcp_trim_head() to recalculate the number of segments in the skb with the skb's existing MSS, so trimming the head causes the skb segment count to be monotonically non-increasing - it should stay the same or go down, but not increase. Previously tcp_trim_head() used the current MSS of the connection. But if there was a decrease in MSS between original transmission and ACK (e.g. due to PMTUD), this could cause tcp_trim_head() to counter-intuitively increase the segment count when trimming bytes off the head of an skb. This violated assumptions in tcp_tso_acked() that tcp_trim_head() only decreases the packet count, so that packets_acked in tcp_tso_acked() could underflow, leading tcp_clean_rtx_queue() to pass u32 pkts_acked values as large as 0xffffffff to ca_ops->pkts_acked(). As an aside, if tcp_trim_head() had really wanted the skb to reflect the current MSS, it should have called tcp_set_skb_tso_segs() unconditionally, since a decrease in MSS would mean that a single-packet skb should now be sliced into multiple segments. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Nandita Dukkipati <nanditad@google.com> Acked-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Glauber Costa authored
sysctl_tcp_mem() initialization was moved to sysctl_tcp_ipv4.c in commit 3dc43e3e, since it became a per-ns value. That code, however, will never run when CONFIG_SYSCTL is disabled, leading to bogus values on those fields - causing hung TCP sockets. This patch fixes it by keeping an initialization code in tcp_init(). It will be overwritten by the first net namespace init if CONFIG_SYSCTL is compiled in, and do the right thing if it is compiled out. It is also named properly as tcp_init_mem(), to properly signal its non-sysctl side effect on TCP limits. Reported-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Glauber Costa <glommer@parallels.com> Cc: David S. Miller <davem@davemloft.net> Link: http://lkml.kernel.org/r/4F22D05A.8030604@parallels.com [ renamed the function, tidied up the changelog a bit ] Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] dasd: revalidate server for new pathgroup [S390] dasd: revert LCU optimization [S390] cleanup entry point definition
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: generic atomic64 support
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: vmwgfx: Fix assignment in vmw_framebuffer_create_handle drm/radeon/kms: Fix device tree linkage of i2c buses drm: Pass the real error code back during GEM bo initialisation Revert "drm/i810: cleanup reclaim_buffers"
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
NFS client bugfixes for Linux 3.3 (pull 3) * tag 'nfs-for-3.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Fix machine creds in generic_create_cred and generic_match
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Power management fix for 3.3-rc2 Fix for a hibernate (s2disk) regression introduced during the 3.2 merge window that causes s2disk to trigger BUG_ON() in freeze_workqueues_begin() if there is not enough swap space to save the image. * tag 'pm-fix-for-3.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Hibernate: Fix s2disk regression related to freezing workqueues
-
Ryan Mallon authored
The assignment of handle in vmw_framebuffer_create_handle doesn't actually do anything useful and is incorrectly assigning an integer value to a pointer argument. It appears that this is a typo and should be dereferencing handle rather than assigning to it directly. This fixes a bug where an undefined handle value is potentially returned to user-space. Signed-off-by:
Ryan Mallon <rmallon@gmail.com> Reviewed-by: Jakob Bornecrantz<jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Jean Delvare authored
Properly set the parent device of i2c buses before registering them so that they will show at the right place in the device tree (rather than in /sys/devices directly.) Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
Chris Wilson authored
In particular, I found I was hitting the max-file limit in the VFS, and the EFILE was being magically transformed into ENOMEM. Confusion reigns. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
This reverts commit 87499ffd. Where is that paper bag ... ah here. I've failed to take an odd interaction between my other cleanups and this reclaim_buffers patch into account and also failed to properly test it. Looks like there are more dragons and hidden trapdoors in the drm release path than actual lines of code. Until I get a clue, let's just revert this. Signed-Off-by:
-
- 29 Jan, 2012 6 commits
-
-
Guenter Roeck authored
NCT6776F only supports pwm mode for pwm2 and pwm3. Return error if an attempt is made to set those pwm channels to DC mode. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org # 3.0+ Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com>
-
Rafael J. Wysocki authored
Commit 2aede851 PM / Hibernate: Freeze kernel threads after preallocating memory introduced a mechanism by which kernel threads were frozen after the preallocation of hibernate image memory to avoid problems with frozen kernel threads not responding to memory freeing requests. However, it overlooked the s2disk code path in which the SNAPSHOT_CREATE_IMAGE ioctl was run directly after SNAPSHOT_FREE, which caused freeze_workqueues_begin() to BUG(), because it saw that worqueues had been already frozen. Although in principle this issue might be addressed by removing the relevant BUG_ON() from freeze_workqueues_begin(), that would reintroduce the very problem that commit 2aede851 attempted to avoid into that particular code path. For this reason, to fix the issue at hand, introduce thaw_kernel_threads() and make the SNAPSHOT_FREE ioctl execute it. Special thanks to Srivatsa S. Bhat for detailed analysis of the problem. Reported-and-tested-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: stable@kernel.org
-
Vivien Didelot authored
When no platform data was supplied, returned error code was 0. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: stable@vger.kernel.org # 2.6.32+ Signed-off-by:
-
Linus Torvalds authored
Merge tag 'driver-core-3.3-rc1-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Here are some patches for the 3.3-rc1 tree. It contains the removal of the sysdev code, now that all users of it are gone, as well as some sysfs bugfixes that have been reported by users. There are also some documentation updates here as well. * tag 'driver-core-3.3-rc1-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: Complain bitterly about attempts to remove files from nonexistent directories. stable: update documentation to ask for kernel version base/core.c:fix typo in comment in function device_add Documentation: devres: add allocation functions to list of supported calls Documentation update for the driver model core kernel-doc: fix new warnings in driver-core kernel-doc: fix new warnings in debugfs kernel-doc: fix new warnings in device.h driver core: remove drivers/base/sys.c and include/linux/sysdev.h
-
git://github.com/rustyrussell/linuxLinus Torvalds authored
* tag 'for-linus' of git://github.com/rustyrussell/linux: lguest: remove reference from Documentation/virtual/00-INDEX virtio: correct the memory barrier in virtqueue_kick_prepare() virtio: fix typos of memory barriers
-
Linus Torvalds authored
Merge branch 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/granttable: Disable grant v2 for HVM domains. x86: xen: size struct xen_spinlock to always fit in arch_spinlock_t
-
