- 01 Sep, 2010 8 commits
-
-
Nicolas Dichtel authored
Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
Attached is a small patch to remove a warning ("warning: ISO C90 forbids mixed declarations and code" with gcc 4.3.2). Signed-off-by: -
Michal Soltys authored
This patch fixes init_vf() function, so on each new backlog period parent's cl_cfmin is properly updated (including further propgation towards the root), even if the activated leaf has no upperlimit curve defined. Signed-off-by:
Michal Soltys <soltys@ziu.info> Signed-off-by:
-
Denis Kirjanov authored
mdiobus resources must be released on exit Signed-off-by:
Denis Kirjanov <dkirjanov@kernel.org> Acked-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Jeff Mahoney authored
While reviewing commit 1c40be12, I audited other users of tc_action_ops->dump for information leaks. That commit covered almost all of them but act_police still had a leak. opt.limit and opt.capab aren't zeroed out before the structure is passed out. This patch uses the C99 initializers to zero everything unused out. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Acked-by:
-
Eric Dumazet authored
Its currently illegal to call kthread_stop(NULL) Reported-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Breno Leitao authored
This change just add the IBM eHEA 10Gb network drivers as supported. Signed-off-by:
Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by:
-
-
- 31 Aug, 2010 5 commits
-
-
Luis R. Rodriguez authored
The 5 GHz CTL indexes were not being read for all hardware devices due to the masking out through the CTL_MODE_M mask being one bit too short. Without this the calibrated regulatory maximum values were not being picked up when devices operate on 5 GHz in HT40 mode. The final output power used for Atheros devices is the minimum between the calibrated CTL values and what CRDA provides. Cc: stable@kernel.org [2.6.27+] Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
The EEPROM is compressed on AR9003, upon decompression the wrong upper limit was being used for the block which prevented the 5 GHz CTL indexes from being used, which are stored towards the end of the EEPROM block. This fix allows the actual intended regulatory limits to be used on AR9003 hardware. Cc: stable@kernel.org [2.6.36+] Signed-off-by:
-
John W. Linville authored
Otherwise lockdep complains... https://bugzilla.kernel.org/show_bug.cgi?id=17311 [ INFO: possible circular locking dependency detected ] 2.6.36-rc2-git4 #12 ------------------------------------------------------- kworker/0:3/3630 is trying to acquire lock: (rtnl_mutex){+.+.+.}, at: [<ffffffff813396c7>] rtnl_lock+0x12/0x14 but task is already holding lock: (rfkill_global_mutex){+.+.+.}, at: [<ffffffffa014b129>] rfkill_switch_all+0x24/0x49 [rfkill] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (rfkill_global_mutex){+.+.+.}: [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffffa014b4ab>] rfkill_register+0x2b/0x29c [rfkill] [<ffffffffa0185ba0>] wiphy_register+0x1ae/0x270 [cfg80211] [<ffffffffa0206f01>] ieee80211_register_hw+0x1b4/0x3cf [mac80211] [<ffffffffa0292e98>] iwl_ucode_callback+0x9e9/0xae3 [iwlagn] [<ffffffff812d3e9d>] request_firmware_work_func+0x54/0x6f [<ffffffff81065d15>] kthread+0x8c/0x94 [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10 -> #1 (cfg80211_mutex){+.+.+.}: [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffffa018605e>] cfg80211_get_dev_from_ifindex+0x1b/0x7c [cfg80211] [<ffffffffa0189f36>] cfg80211_wext_giwscan+0x58/0x990 [cfg80211] [<ffffffff8139a3ce>] ioctl_standard_iw_point+0x1a8/0x272 [<ffffffff8139a529>] ioctl_standard_call+0x91/0xa7 [<ffffffff8139a687>] T.723+0xbd/0x12c [<ffffffff8139a727>] wext_handle_ioctl+0x31/0x6d [<ffffffff8133014e>] dev_ioctl+0x63d/0x67a [<ffffffff8131afd9>] sock_ioctl+0x48/0x21d [<ffffffff81102abd>] do_vfs_ioctl+0x4ba/0x509 [<ffffffff81102b5d>] sys_ioctl+0x51/0x74 [<ffffffff81009e02>] system_call_fastpath+0x16/0x1b -> #0 (rtnl_mutex){+.+.+.}: [<ffffffff810796b0>] __lock_acquire+0xa93/0xd9a [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffff813396c7>] rtnl_lock+0x12/0x14 [<ffffffffa0185cb5>] cfg80211_rfkill_set_block+0x1a/0x7b [cfg80211] [<ffffffffa014aed0>] rfkill_set_block+0x80/0xd5 [rfkill] [<ffffffffa014b07e>] __rfkill_switch_all+0x3f/0x6f [rfkill] [<ffffffffa014b13d>] rfkill_switch_all+0x38/0x49 [rfkill] [<ffffffffa014b821>] rfkill_op_handler+0x105/0x136 [rfkill] [<ffffffff81060708>] process_one_work+0x248/0x403 [<ffffffff81062620>] worker_thread+0x139/0x214 [<ffffffff81065d15>] kthread+0x8c/0x94 [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10 Signed-off-by:
Johannes Berg <johannes@sipsolutions.net>
-
David S. Miller authored
Once we started enforcing the a nl_table[] entry exist for a protocol, NETLINK_USERSOCK stopped working. Add a dummy table entry so that it works again. Reported-by:
Thomas Voegtle <tv@lio96.de> Tested-by:
-
David S. Miller authored
If irda_open_tsap() fails, the irda_bind() code tries to destroy the ->ias_obj object by hand, but does so wrongly. In particular, it fails to a) release the hashbin attached to the object and b) reset the self->ias_obj pointer to NULL. Fix both problems by using irias_delete_object() and explicitly setting self->ias_obj to NULL, just as irda_release() does. Reported-by:
Tavis Ormandy <taviso@cmpxchg8b.com> Signed-off-by:
-
- 30 Aug, 2010 5 commits
-
-
Johannes Berg authored
Wireless extensions have an unfortunate, undocumented requirement which requires drivers to always fill iwp->length when returning a successful status. When a driver doesn't do this, it leads to a kernel heap content leak when userspace offers a larger buffer than would have been necessary. Arguably, this is a driver bug, as it should, if it returns 0, fill iwp->length, even if it separately indicated that the buffer contents was not valid. However, we can also at least avoid the memory content leak if the driver doesn't do this by setting the iwp length to max_tokens, which then reflects how big the buffer is that the driver may fill, regardless of how big the userspace buffer is. To illustrate the point, this patch also fixes a corresponding cfg80211 bug (since this requirement isn't documented nor was ever pointed out by anyone during code review, I don't trust all drivers nor all cfg80211 handlers to implement it correctly). Cc: stable@kernel.org [all the way back] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
John W. Linville authored
Reported-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Johannes Berg authored
The new workqueue changes helped me find this bug that's been lingering since the changes to the work processing in mac80211 -- the work timer is never deleted properly. Do that to avoid having it fire after all data structures have been freed. It can't be re-armed because all it will do, if running, is schedule the work, but that gets flushed later and won't have anything to do since all work items are gone by now (by way of interface removal). Cc: stable@kernel.org [2.6.34+] Signed-off-by:
-
Christian Lamparter authored
Michael reported that p54* never really entered power save mode, even tough it was enabled. It turned out that upon a power save mode change the firmware will set a special flag onto the last outgoing frame tx status (which in this case is almost always the designated PSM nullfunc frame). This flag confused the driver; It erroneously reported transmission failures to the stack, which then generated the next nullfunc. and so on... Cc: <stable@kernel.org> Reported-by:
Michael Buesch <mb@bu3sch.de> Tested-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
John W. Linville authored
This avoids a NULL pointer dereference as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=625889 When the WARN condition is hit in ieee80211_get_tx_rate, it will return NULL. So, we need to check the return value and avoid dereferencing it in that case. Signed-off-by:
Bob Copeland <me@bobcopeland.com>
-
- 28 Aug, 2010 2 commits
-
-
Ken Kawasaki authored
pcnet_cs: add new_id: "KENTRONICS KEP-230" 10Base-T PCMCIA card. Signed-off-by:Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by:
-
Julia Lawall authored
The string clone is only used as a temporary copy of the argument val within the while loop, and so it should be freed before leaving the function. The call to strsep, however, modifies clone, so a pointer to the front of the string is kept in saved_clone, to make it possible to free it. The sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E; identifier l; statement S; @@ *x= \(kasprintf\|kstrdup\)(...); ... if (x == NULL) S ... when != kfree(x) when != E = x if (...) { <... when != kfree(x) * goto l; ...> * return ...; } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
- 27 Aug, 2010 1 commit
-
-
Mike Rapoport authored
The commit 886275ce (param: lock if_sdio's lbs_helper_name and lbs_fw_name against sysfs changes) introduced new fields into the if_sdio_card structure. It caused missalignment of the if_sdio_card.buffer field and failure at driver load time: ~# modprobe libertas_sdio [ 62.315124] libertas_sdio: Libertas SDIO driver [ 62.319976] libertas_sdio: Copyright Pierre Ossman [ 63.020629] DMA misaligned error with device 48 [ 63.025207] mmci-omap-hs mmci-omap-hs.1: unexpected dma status 800 [ 66.005035] libertas: command 0x0003 timed out [ 66.009826] libertas: Timeout submitting command 0x0003 [ 66.016296] libertas: PREP_CMD: command 0x0003 failed: -110 Adding explicit alignment attribute for the if_sdio_card.buffer field fixes this problem. Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Acked-by:
Marek Vasut <marek.vasut@gmail.com> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
- 26 Aug, 2010 6 commits
-
-
Jeff Mahoney authored
caif does not build on ia64 starting with 2.6.32-rc1. Using asm/unaligned.h instead of linux/unaligned/le_byteshift.h fixes the issue. include/linux/unaligned/le_byteshift.h:40:50: error: redefinition of 'get_unaligned_le16' include/linux/unaligned/le_byteshift.h:45:50: error: redefinition of 'get_unaligned_le32' include/linux/unaligned/le_byteshift.h:50:50: error: redefinition of 'get_unaligned_le64' include/linux/unaligned/le_byteshift.h:55:51: error: redefinition of 'put_unaligned_le16' include/linux/unaligned/le_byteshift.h:60:51: error: redefinition of 'put_unaligned_le32' include/linux/unaligned/le_byteshift.h:65:51: error: redefinition of 'put_unaligned_le64' include/linux/unaligned/le_struct.h:31:51: note: previous definition of 'put_unaligned_le64' was here Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Bernard Pidoux F6BVP authored
This patch moves a missplaced sock_put(sk) after bh_unlock_sock(sk) like in other parts of AX25 driver. Signed-off-by:
Bernard Pidoux <f6bvp@free.fr> Signed-off-by:
-
Breno Leitao authored
Qlge is freeing the buffers before stopping the card DMA, and this can cause some severe error, as a EEH event on PPC. This patch just stop the card and then free the resources. Signed-off-by:
Ron Mercer <ron.mercer@qlogic.com> Signed-off-by:
-
Eric Dumazet authored
close https://bugzilla.kernel.org/show_bug.cgi?id=16529 Before calling dev_forward_skb(), we should make sure skb head contains at least an ethernet header, even if length included in upper layer said so. Use pskb_may_pull() to make sure this ethernet header is present in skb head. Reported-by:
Thomas Heil <heil@terminal-consulting.de> Reported-by:
Ian Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by:
-
KOSAKI Motohiro authored
This issue come from ruby language community. Below test program hang up when only run on Linux. % uname -mrsv Linux 2.6.26-2-486 #1 Sat Dec 26 08:37:39 UTC 2009 i686 % ruby -rsocket -ve ' BasicSocket.do_not_reverse_lookup = true serv = TCPServer.open("127.0.0.1", 0) s1 = TCPSocket.open("127.0.0.1", serv.addr[1]) s2 = serv.accept s2.close s1.write("a") rescue p $! s1.write("a") rescue p $! Thread.new { s1.write("a") }.join' ruby 1.9.3dev (2010-07-06 trunk 28554) [i686-linux] #<Errno::EPIPE: Broken pipe> [Hang Here] FreeBSD, Solaris, Mac doesn't. because Ruby's write() method call select() internally. and tcp_poll has a bug. SUS defined 'ready for writing' of select() as following. | A descriptor shall be considered ready for writing when a call to an output | function with O_NONBLOCK clear would not block, whether or not the function | would transfer data successfully. That said, EPIPE situation is clearly one of 'ready for writing'. We don't have read-side issue because tcp_poll() already has read side shutdown care. | if (sk->sk_shutdown & RCV_SHUTDOWN) | mask |= POLLIN | POLLRDNORM | POLLRDHUP; So, Let's insert same logic in write side. - reference url http://blade.nagaokaut.ac.jp/cgi-bin/scat.rb/ruby/ruby-core/31065 http://blade.nagaokaut.ac.jp/cgi-bin/scat.rb/ruby/ruby-core/31068Signed-off-by:KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Eric Dumazet authored
As discovered by Anton Blanchard, current code to autotune tcp_death_row.sysctl_max_tw_buckets, sysctl_tcp_max_orphans and sysctl_max_syn_backlog makes little sense. The bigger a page is, the less tcp_max_orphans is : 4096 on a 512GB machine in Anton's case. (tcp_hashinfo.bhash_size * sizeof(struct inet_bind_hashbucket)) is much bigger if spinlock debugging is on. Its wrong to select bigger limits in this case (where kernel structures are also bigger) bhash_size max is 65536, and we get this value even for small machines. A better ground is to use size of ehash table, this also makes code shorter and more obvious. Based on a patch from Anton, and another from David. Reported-and-tested-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
- 25 Aug, 2010 1 commit
-
-
David S. Miller authored
As reported by Anton Blanchard when we use percpu_counter_read_positive() to make our orphan socket limit checks, the check can be off by up to num_cpus_online() * batch (which is 32 by default) which on a 128 cpu machine can be as large as the default orphan limit itself. Fix this by doing the full expensive sum check if the optimized check triggers. Reported-by:
-
- 24 Aug, 2010 10 commits
-
-
Dan Carpenter authored
Casting "pep->tx_desc_dma" to to a struct tx_desc pointer makes gcc complain: drivers/net/pxa168_eth.c:657: warning: cast to pointer from integer of different size Signed-off-by:
-
Dan Carpenter authored
The phy_mii_ioctl() function changed recently. It now takes a struct ifreq pointer directly. Signed-off-by:
-
Dan Carpenter authored
A couple issues here: * Some resources weren't released. * If alloc_etherdev() failed it would have caused a NULL dereference because "pep" would be null when we checked "if (pep->clk)". * Also it's better to propagate the error codes from mdiobus_register() instead of just returning -ENOMEM. Signed-off-by:
-
Dan Carpenter authored
"pep->pd" isn't checked consistently in this function. For example it's dereferenced unconditionally on the next line after the end of the if condition. This function is only called from pxa168_eth_probe() and pep->pd is always non-NULL so I removed the check. Signed-off-by:
-
Anton Vorontsov authored
It is possible that phylib will call adjust_link before returning from {,of_}phy_connect(), which may cause the following [very rare, though] oops upon reopening the device: Unable to handle kernel paging request for data at address 0x0000024c Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=2 LTT NESTING LEVEL : 0 P1021 RDB Modules linked in: NIP: c0345dac LR: c0345dac CTR: c0345d84 TASK = dffab6b0[30] 'events/0' THREAD: c0d24000 CPU: 0 [...] NIP [c0345dac] adjust_link+0x28/0x19c LR [c0345dac] adjust_link+0x28/0x19c Call Trace: [c0d25f00] [000045e1] 0x45e1 (unreliable) [c0d25f30] [c036c158] phy_state_machine+0x3ac/0x554 [...] Here is why. Drivers store phydev in their private structures, e.g. gianfar driver: static int init_phy(struct net_device *dev) { ... priv->phydev = of_phy_connect(...); ... } So that adjust_link could retrieve it back: static void adjust_link(struct net_device *dev) { ... struct phy_device *phydev = priv->phydev; ... } If the device has been opened before, then phydev->state is set to PHY_HALTED (or undefined if the driver didn't call phy_stop()). Now, phy_connect starts the PHY state machine before returning phydev to the driver: phy_start_machine(phydev, NULL); if (phydev->irq > 0) phy_start_interrupts(phydev); return phydev; The time between 'phy_start_machine()' and 'return phydev' is undefined. The start machine routine delays execution for 1 second, which is enough for most cases. But under heavy load, or if you're unlucky, it is quite possible that PHY state machine will execute before phy_connect() returns, and so adjust_link callback will try to dereference phydev, which is not yet ready. To fix the issue, simply initialize the PHY's state to PHY_READY during phy_attach(). This will ensure that phylib won't call adjust_link before phy_start(). Signed-off-by:Anton Vorontsov <avorontsov@mvista.com> Signed-off-by:
-
Heiko Carstens authored
Fix this error on an s390 allyesconfig build: linux-2.6/drivers/net/caif/caif_spi.c:98: undefined reference to `dma_free_coherent' Cc: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by:Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Neil Horman authored
If netconsole is in use, there is a possibility for deadlock in 3c59x between boomerang_interrupt and boomerang_start_xmit. Both routines take the vp->lock, and if netconsole is in use, a pr_* call from the boomerang_interrupt routine will result in the netconsole code attempting to trnasmit an skb, which can try to take the same spin lock, resulting in deadlock. The fix is pretty straightforward. This patch allocats a bit in the 3c59x private structure to indicate that its handling an interrupt. If we get into the transmit routine and that bit is set, we can be sure that we have recursed and will deadlock if we continue, so instead we just return NETDEV_TX_BUSY, so the stack requeues the skb to try again later. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Yinglin Luan authored
Function qlcnic_intr has pointer to qlcnic_host_sds_ring as second parameter not pointer to qlcnic_adapter. Signed-off-by:
Yinglin Luan <synmyth@gmail.com> Signed-off-by:
-
Yinglin Luan authored
Function netxen_intr has pointer to nx_host_sds_ring as second parameter not pointer to netxen_adapter. Signed-off-by:
-
Changli Gao authored
nf_bridge_alloc() always reset the skb->nf_bridge, so we should always put the old one. Signed-off-by:
Changli Gao <xiaosuo@gmail.com> Signed-off-by:
Bart De Schuymer <bdschuym@pandora.be> Signed-off-by:
-
- 23 Aug, 2010 2 commits
-
-
Florian Westphal authored
commit f3c5c1bf (netfilter: xtables: make ip_tables reentrant) forgot to also compute the jumpstack size in the compat handlers. Result is that "iptables -I INPUT -j userchain" turns into -j DROP. Reported by Sebastian Roesner on #netfilter, closes http://bugzilla.netfilter.org/show_bug.cgi?id=669. Note: arptables change is compile-tested only. Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
Mikael Pettersson <mikpe@it.uu.se> Signed-off-by:
-
Randy Dunlap authored
Why wouldn't kconfig symbol ISDN_DRV_AVMB1_B1PCMCIA also depend on PCMCIA? Fix build for PCMCIA not enabled: ERROR: "b1_free_card" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1ctl_proc_fops" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_reset_ctr" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_load_firmware" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_send_message" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_release_appl" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_register_appl" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_getrevision" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_detect" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_interrupt" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_alloc_card" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Carsten Paeth <calle@calle.de> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by:
-
