Skip to content

L
linux
Switch branch/tag
  1. 12 Apr, 2023 3 commits
  3. 11 Apr, 2023 1 commit
  5. 10 Apr, 2023 10 commits
    • Luiz Augusto von Dentz's avatar
      Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp} · a2a9339e
      Luiz Augusto von Dentz authored 
      Similar to commit d0be8347 ("Bluetooth: L2CAP: Fix use-after-free
caused by l2cap_chan_put"), just use l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.

Cc: stable@kernel.org
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: default avatarMin Li <lm0963hack@gmail.com>
      a2a9339e
    • Claudia Draghicescu's avatar
      Bluetooth: Set ISO Data Path on broadcast sink · d2e4f1b1
      Claudia Draghicescu authored 
      This patch enables ISO data rx on broadcast sink.

Fixes: eca0ae4a ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: default avatarClaudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      d2e4f1b1
    • Luiz Augusto von Dentz's avatar
      Bluetooth: hci_conn: Fix possible UAF · 5dc7d23e
      Luiz Augusto von Dentz authored 
      This fixes the following trace:

==================================================================
BUG: KASAN: slab-use-after-free in hci_conn_del+0xba/0x3a0
Write of size 8 at addr ffff88800208e9c8 by task iso-tester/31

CPU: 0 PID: 31 Comm: iso-tester Not tainted 6.3.0-rc2-g991aa4a69a47
 #4716
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc36
04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x1d/0x70
 print_report+0xce/0x610
 ? __virt_addr_valid+0xd4/0x150
 ? hci_conn_del+0xba/0x3a0
 kasan_report+0xdd/0x110
 ? hci_conn_del+0xba/0x3a0
 hci_conn_del+0xba/0x3a0
 hci_conn_hash_flush+0xf2/0x120
 hci_dev_close_sync+0x388/0x920
 hci_unregister_dev+0x122/0x260
 vhci_release+0x4f/0x90
 __fput+0x102/0x430
 task_work_run+0xf1/0x160
 ? __pfx_task_work_run+0x10/0x10
 ? mark_held_locks+0x24/0x90
 exit_to_user_mode_prepare+0x170/0x180
 syscall_exit_to_user_mode+0x19/0x50
 do_syscall_64+0x4e/0x90
 entry_SYSCALL_64_after_hwframe+0x70/0xda

Fixes: 0f00cd32 ("Bluetooth: Free potentially unfreed SCO connection")
Link: https://syzkaller.appspot.com/bug?extid=8bb72f86fc823817bc5d
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      5dc7d23e
    • Luiz Augusto von Dentz's avatar
      Bluetooth: SCO: Fix possible circular locking dependency sco_sock_getsockopt · 975abc0c
      Luiz Augusto von Dentz authored 
      This attempts to fix the following trace:

======================================================
WARNING: possible circular locking dependency detected
6.3.0-rc2-g68fcb3a7bf97 #4706 Not tainted
------------------------------------------------------
sco-tester/31 is trying to acquire lock:
ffff8880025b8070 (&hdev->lock){+.+.}-{3:3}, at:
sco_sock_getsockopt+0x1fc/0xa90

but task is already holding lock:
ffff888001eeb130 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at:
sco_sock_getsockopt+0x104/0xa90

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}:
       lock_sock_nested+0x32/0x80
       sco_connect_cfm+0x118/0x4a0
       hci_sync_conn_complete_evt+0x1e6/0x3d0
       hci_event_packet+0x55c/0x7c0
       hci_rx_work+0x34c/0xa00
       process_one_work+0x575/0x910
       worker_thread+0x89/0x6f0
       kthread+0x14e/0x180
       ret_from_fork+0x2b/0x50

-> #1 (hci_cb_list_lock){+.+.}-{3:3}:
       __mutex_lock+0x13b/0xcc0
       hci_sync_conn_complete_evt+0x1ad/0x3d0
       hci_event_packet+0x55c/0x7c0
       hci_rx_work+0x34c/0xa00
       process_one_work+0x575/0x910
       worker_thread+0x89/0x6f0
       kthread+0x14e/0x180
       ret_from_fork+0x2b/0x50

-> #0 (&hdev->lock){+.+.}-{3:3}:
       __lock_acquire+0x18cc/0x3740
       lock_acquire+0x151/0x3a0
       __mutex_lock+0x13b/0xcc0
       sco_sock_getsockopt+0x1fc/0xa90
       __sys_getsockopt+0xe9/0x190
       __x64_sys_getsockopt+0x5b/0x70
       do_syscall_64+0x42/0x90
       entry_SYSCALL_64_after_hwframe+0x70/0xda

other info that might help us debug this:

Chain exists of:
  &hdev->lock --> hci_cb_list_lock --> sk_lock-AF_BLUETOOTH-BTPROTO_SCO

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO);
                               lock(hci_cb_list_lock);
                               lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO);
  lock(&hdev->lock);

 *** DEADLOCK ***

1 lock held by sco-tester/31:
 #0: ffff888001eeb130 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0},
 at: sco_sock_getsockopt+0x104/0xa90

Fixes: 248733e8 ("Bluetooth: Allow querying of supported offload codecs over SCO socket")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      975abc0c
    • Luiz Augusto von Dentz's avatar
      Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm · 9a8ec9e8
      Luiz Augusto von Dentz authored 
      This attempts to fix the following trace:

======================================================
WARNING: possible circular locking dependency detected
6.3.0-rc2-g0b93eeba4454 #4703 Not tainted
------------------------------------------------------
kworker/u3:0/46 is trying to acquire lock:
ffff888001fd9130 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at:
sco_connect_cfm+0x118/0x4a0

but task is already holding lock:
ffffffff831e3340 (hci_cb_list_lock){+.+.}-{3:3}, at:
hci_sync_conn_complete_evt+0x1ad/0x3d0

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (hci_cb_list_lock){+.+.}-{3:3}:
       __mutex_lock+0x13b/0xcc0
       hci_sync_conn_complete_evt+0x1ad/0x3d0
       hci_event_packet+0x55c/0x7c0
       hci_rx_work+0x34c/0xa00
       process_one_work+0x575/0x910
       worker_thread+0x89/0x6f0
       kthread+0x14e/0x180
       ret_from_fork+0x2b/0x50

-> #1 (&hdev->lock){+.+.}-{3:3}:
       __mutex_lock+0x13b/0xcc0
       sco_sock_connect+0xfc/0x630
       __sys_connect+0x197/0x1b0
       __x64_sys_connect+0x37/0x50
       do_syscall_64+0x42/0x90
       entry_SYSCALL_64_after_hwframe+0x70/0xda

-> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}:
       __lock_acquire+0x18cc/0x3740
       lock_acquire+0x151/0x3a0
       lock_sock_nested+0x32/0x80
       sco_connect_cfm+0x118/0x4a0
       hci_sync_conn_complete_evt+0x1e6/0x3d0
       hci_event_packet+0x55c/0x7c0
       hci_rx_work+0x34c/0xa00
       process_one_work+0x575/0x910
       worker_thread+0x89/0x6f0
       kthread+0x14e/0x180
       ret_from_fork+0x2b/0x50

other info that might help us debug this:

Chain exists of:
  sk_lock-AF_BLUETOOTH-BTPROTO_SCO --> &hdev->lock --> hci_cb_list_lock

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(hci_cb_list_lock);
                               lock(&hdev->lock);
                               lock(hci_cb_list_lock);
  lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO);

 *** DEADLOCK ***

4 locks held by kworker/u3:0/46:
 #0: ffff8880028d1130 ((wq_completion)hci0#2){+.+.}-{0:0}, at:
 process_one_work+0x4c0/0x910
 #1: ffff8880013dfde0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0},
 at: process_one_work+0x4c0/0x910
 #2: ffff8880025d8070 (&hdev->lock){+.+.}-{3:3}, at:
 hci_sync_conn_complete_evt+0xa6/0x3d0
 #3: ffffffffb79e3340 (hci_cb_list_lock){+.+.}-{3:3}, at:
 hci_sync_conn_complete_evt+0x1ad/0x3d0
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      9a8ec9e8
    • Sasha Finkelstein's avatar
      bluetooth: btbcm: Fix logic error in forming the board name. · b76abe46
      Sasha Finkelstein authored 
      This patch fixes an incorrect loop exit condition in code that replaces
'/' symbols in the board name. There might also be a memory corruption
issue here, but it is unlikely to be a real problem.

Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarSasha Finkelstein <fnkl.kernel@gmail.com>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      b76abe46
    • Zheng Wang's avatar
      Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition · 73f7b171
      Zheng Wang authored 
      In btsdio_probe, the data->work is bound with btsdio_work. It will be
started in btsdio_send_frame.

If the btsdio_remove runs with a unfinished work, there may be a race
condition that hdev is freed but used in btsdio_work. Fix it by
canceling the work before do cleanup in btsdio_remove.
Signed-off-by: default avatarZheng Wang <zyytlz.wz@163.com>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      73f7b171
    • Min Li's avatar
      Bluetooth: Fix race condition in hidp_session_thread · c95930ab
      Min Li authored 
      There is a potential race condition in hidp_session_thread that may
lead to use-after-free. For instance, the timer is active while
hidp_del_timer is called in hidp_session_thread(). After hidp_session_put,
then 'session' will be freed, causing kernel panic when hidp_idle_timeout
is running.

The solution is to use del_timer_sync instead of del_timer.

Here is the call trace:

? hidp_session_probe+0x780/0x780
call_timer_fn+0x2d/0x1e0
__run_timers.part.0+0x569/0x940
hidp_session_probe+0x780/0x780
call_timer_fn+0x1e0/0x1e0
ktime_get+0x5c/0xf0
lapic_next_deadline+0x2c/0x40
clockevents_program_event+0x205/0x320
run_timer_softirq+0xa9/0x1b0
__do_softirq+0x1b9/0x641
__irq_exit_rcu+0xdc/0x190
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0xa1/0xc0

Cc: stable@vger.kernel.org
Signed-off-by: default avatarMin Li <lm0963hack@gmail.com>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      c95930ab
    • Luiz Augusto von Dentz's avatar
      Bluetooth: Fix printing errors if LE Connection times out · b62e7220
      Luiz Augusto von Dentz authored 
      This fixes errors like bellow when LE Connection times out since that
is actually not a controller error:

 Bluetooth: hci0: Opcode 0x200d failed: -110
 Bluetooth: hci0: request failed to create LE connection: err -110

Instead the code shall properly detect if -ETIMEDOUT is returned and
send HCI_OP_LE_CREATE_CONN_CANCEL to give up on the connection.

Link: https://github.com/bluez/bluez/issues/340
Fixes: 8e8b92ee ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      b62e7220
    • Luiz Augusto von Dentz's avatar
      Bluetooth: hci_conn: Fix not cleaning up on LE Connection failure · 19cf60bf
      Luiz Augusto von Dentz authored 
      hci_connect_le_scan_cleanup shall always be invoked to cleanup the
states and re-enable passive scanning if necessary, otherwise it may
cause the pending action to stay active causing multiple attempts to
connect.

Fixes: 9b3628d7 ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      19cf60bf
  7. 09 Apr, 2023 3 commits
  9. 08 Apr, 2023 4 commits
    • Douglas Anderson's avatar
      r8152: Add __GFP_NOWARN to big allocations · 5cc33f13
      Douglas Anderson authored 
      When memory is a little tight on my system, it's pretty easy to see
warnings that look like this.

  ksoftirqd/0: page allocation failure: order:3, mode:0x40a20(GFP_ATOMIC|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
  ...
  Call trace:
   dump_backtrace+0x0/0x1e8
   show_stack+0x20/0x2c
   dump_stack_lvl+0x60/0x78
   dump_stack+0x18/0x38
   warn_alloc+0x104/0x174
   __alloc_pages+0x588/0x67c
   alloc_rx_agg+0xa0/0x190 [r8152 ...]
   r8152_poll+0x270/0x760 [r8152 ...]
   __napi_poll+0x44/0x1ec
   net_rx_action+0x100/0x300
   __do_softirq+0xec/0x38c
   run_ksoftirqd+0x38/0xec
   smpboot_thread_fn+0xb8/0x248
   kthread+0x134/0x154
   ret_from_fork+0x10/0x20

On a fragmented system it's normal that order 3 allocations will
sometimes fail, especially atomic ones. The driver handles these
failures fine and the WARN just creates spam in the logs for this
case. The __GFP_NOWARN flag is exactly for this situation, so add it
to the allocation.

NOTE: my testing is on a 5.15 system, but there should be no reason
that this would be fundamentally different on a mainline kernel.
Signed-off-by: default avatarDouglas Anderson <dianders@chromium.org>
Acked-by: default avatarHayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230406171411.1.I84dbef45786af440fd269b71e9436a96a8e7a152@changeidSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      5cc33f13
    • Radu Pirea (OSS)'s avatar
      net: phy: nxp-c45-tja11xx: fix unsigned long multiplication overflow · bdaaecc1
      Radu Pirea (OSS) authored 
      Any multiplication between GENMASK(31, 0) and a number bigger than 1
will be truncated because of the overflow, if the size of unsigned long
is 32 bits.

Replaced GENMASK with GENMASK_ULL to make sure that multiplication will
be between 64 bits values.

Cc: <stable@vger.kernel.org> # 5.15+
Fixes: 514def5d ("phy: nxp-c45-tja11xx: add timestamping support")
Signed-off-by: default avatarRadu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230406095953.75622-1-radu-nicolae.pirea@oss.nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      bdaaecc1
    • Felix Huettner's avatar
      net: openvswitch: fix race on port output · 066b8678
      Felix Huettner authored 
      assume the following setup on a single machine:
1. An openvswitch instance with one bridge and default flows
2. two network namespaces "server" and "client"
3. two ovs interfaces "server" and "client" on the bridge
4. for each ovs interface a veth pair with a matching name and 32 rx and
   tx queues
5. move the ends of the veth pairs to the respective network namespaces
6. assign ip addresses to each of the veth ends in the namespaces (needs
   to be the same subnet)
7. start some http server on the server network namespace
8. test if a client in the client namespace can reach the http server

when following the actions below the host has a chance of getting a cpu
stuck in a infinite loop:
1. send a large amount of parallel requests to the http server (around
   3000 curls should work)
2. in parallel delete the network namespace (do not delete interfaces or
   stop the server, just kill the namespace)

there is a low chance that this will cause the below kernel cpu stuck
message. If this does not happen just retry.
Below there is also the output of bpftrace for the functions mentioned
in the output.

The series of events happening here is:
1. the network namespace is deleted calling
   `unregister_netdevice_many_notify` somewhere in the process
2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and
   then runs `synchronize_net`
3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER`
4. this is then handled by `dp_device_event` which calls
   `ovs_netdev_detach_dev` (if a vport is found, which is the case for
   the veth interface attached to ovs)
5. this removes the rx_handlers of the device but does not prevent
   packages to be sent to the device
6. `dp_device_event` then queues the vport deletion to work in
   background as a ovs_lock is needed that we do not hold in the
   unregistration path
7. `unregister_netdevice_many_notify` continues to call
   `netdev_unregister_kobject` which sets `real_num_tx_queues` to 0
8. port deletion continues (but details are not relevant for this issue)
9. at some future point the background task deletes the vport

If after 7. but before 9. a packet is send to the ovs vport (which is
not deleted at this point in time) which forwards it to the
`dev_queue_xmit` flow even though the device is unregistering.
In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is
a while loop (if the packet has a rx_queue recorded) that is infinite if
`dev->real_num_tx_queues` is zero.

To prevent this from happening we update `do_output` to handle devices
without carrier the same as if the device is not found (which would
be the code path after 9. is done).

Additionally we now produce a warning in `skb_tx_hash` if we will hit
the infinite loop.

bpftrace (first word is function name):

__dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2
ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2
netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 27, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 22, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 18, reg_state: 2
netdev_unregister_kobject: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
ovs_vport_send server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
__dev_queue_xmit server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
broken device server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024
ovs_dp_detach_port server: real_num_tx_queues: 0 cpu 9, pid: 9124, tid: 9124, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 33604, tid: 33604

stuck message:

watchdog: BUG: soft lockup - CPU#5 stuck for 26s! [curl:1929279]
Modules linked in: veth pktgen bridge stp llc ip_set_hash_net nft_counter xt_set nft_compat nf_tables ip_set_hash_ip ip_set nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 tls binfmt_misc nls_iso8859_1 input_leds joydev serio_raw dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua sch_fq_codel drm efi_pstore virtio_rng ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel virtio_net ahci net_failover crypto_simd cryptd psmouse libahci virtio_blk failover
CPU: 5 PID: 1929279 Comm: curl Not tainted 5.15.0-67-generic #74-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:netdev_pick_tx+0xf1/0x320
Code: 00 00 8d 48 ff 0f b7 c1 66 39 ca 0f 86 e9 01 00 00 45 0f b7 ff 41 39 c7 0f 87 5b 01 00 00 44 29 f8 41 39 c7 0f 87 4f 01 00 00 <eb> f2 0f 1f 44 00 00 49 8b 94 24 28 04 00 00 48 85 d2 0f 84 53 01
RSP: 0018:ffffb78b40298820 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff9c8773adc2e0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: ffff9c8773adc2e0 RDI: ffff9c870a25e000
RBP: ffffb78b40298858 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9c870a25e000
R13: ffff9c870a25e000 R14: ffff9c87fe043480 R15: 0000000000000000
FS:  00007f7b80008f00(0000) GS:ffff9c8e5f740000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7b80f6a0b0 CR3: 0000000329d66000 CR4: 0000000000350ee0
Call Trace:
 <IRQ>
 netdev_core_pick_tx+0xa4/0xb0
 __dev_queue_xmit+0xf8/0x510
 ? __bpf_prog_exit+0x1e/0x30
 dev_queue_xmit+0x10/0x20
 ovs_vport_send+0xad/0x170 [openvswitch]
 do_output+0x59/0x180 [openvswitch]
 do_execute_actions+0xa80/0xaa0 [openvswitch]
 ? kfree+0x1/0x250
 ? kfree+0x1/0x250
 ? kprobe_perf_func+0x4f/0x2b0
 ? flow_lookup.constprop.0+0x5c/0x110 [openvswitch]
 ovs_execute_actions+0x4c/0x120 [openvswitch]
 ovs_dp_process_packet+0xa1/0x200 [openvswitch]
 ? ovs_ct_update_key.isra.0+0xa8/0x120 [openvswitch]
 ? ovs_ct_fill_key+0x1d/0x30 [openvswitch]
 ? ovs_flow_key_extract+0x2db/0x350 [openvswitch]
 ovs_vport_receive+0x77/0xd0 [openvswitch]
 ? __htab_map_lookup_elem+0x4e/0x60
 ? bpf_prog_680e8aff8547aec1_kfree+0x3b/0x714
 ? trace_call_bpf+0xc8/0x150
 ? kfree+0x1/0x250
 ? kfree+0x1/0x250
 ? kprobe_perf_func+0x4f/0x2b0
 ? kprobe_perf_func+0x4f/0x2b0
 ? __mod_memcg_lruvec_state+0x63/0xe0
 netdev_port_receive+0xc4/0x180 [openvswitch]
 ? netdev_port_receive+0x180/0x180 [openvswitch]
 netdev_frame_hook+0x1f/0x40 [openvswitch]
 __netif_receive_skb_core.constprop.0+0x23d/0xf00
 __netif_receive_skb_one_core+0x3f/0xa0
 __netif_receive_skb+0x15/0x60
 process_backlog+0x9e/0x170
 __napi_poll+0x33/0x180
 net_rx_action+0x126/0x280
 ? ttwu_do_activate+0x72/0xf0
 __do_softirq+0xd9/0x2e7
 ? rcu_report_exp_cpu_mult+0x1b0/0x1b0
 do_softirq+0x7d/0xb0
 </IRQ>
 <TASK>
 __local_bh_enable_ip+0x54/0x60
 ip_finish_output2+0x191/0x460
 __ip_finish_output+0xb7/0x180
 ip_finish_output+0x2e/0xc0
 ip_output+0x78/0x100
 ? __ip_finish_output+0x180/0x180
 ip_local_out+0x5e/0x70
 __ip_queue_xmit+0x184/0x440
 ? tcp_syn_options+0x1f9/0x300
 ip_queue_xmit+0x15/0x20
 __tcp_transmit_skb+0x910/0x9c0
 ? __mod_memcg_state+0x44/0xa0
 tcp_connect+0x437/0x4e0
 ? ktime_get_with_offset+0x60/0xf0
 tcp_v4_connect+0x436/0x530
 __inet_stream_connect+0xd4/0x3a0
 ? kprobe_perf_func+0x4f/0x2b0
 ? aa_sk_perm+0x43/0x1c0
 inet_stream_connect+0x3b/0x60
 __sys_connect_file+0x63/0x70
 __sys_connect+0xa6/0xd0
 ? setfl+0x108/0x170
 ? do_fcntl+0xe8/0x5a0
 __x64_sys_connect+0x18/0x20
 do_syscall_64+0x5c/0xc0
 ? __x64_sys_fcntl+0xa9/0xd0
 ? exit_to_user_mode_prepare+0x37/0xb0
 ? syscall_exit_to_user_mode+0x27/0x50
 ? do_syscall_64+0x69/0xc0
 ? __sys_setsockopt+0xea/0x1e0
 ? exit_to_user_mode_prepare+0x37/0xb0
 ? syscall_exit_to_user_mode+0x27/0x50
 ? __x64_sys_setsockopt+0x1f/0x30
 ? do_syscall_64+0x69/0xc0
 ? irqentry_exit+0x1d/0x30
 ? exc_page_fault+0x89/0x170
 entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7f7b8101c6a7
Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34 24 89
RSP: 002b:00007ffffd6b2198 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b8101c6a7
RDX: 0000000000000010 RSI: 00007ffffd6b2360 RDI: 0000000000000005
RBP: 0000561f1370d560 R08: 00002795ad21d1ac R09: 0030312e302e302e
R10: 00007ffffd73f080 R11: 0000000000000246 R12: 0000561f1370c410
R13: 0000000000000000 R14: 0000000000000005 R15: 0000000000000000
 </TASK>

Fixes: 7f8a436e ("openvswitch: Add conntrack action")
Co-developed-by: default avatarLuca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: default avatarLuca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: default avatarFelix Huettner <felix.huettner@mail.schwarz>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZC0pBXBAgh7c76CA@kernel-bug-kernel-bugSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      066b8678
    • Jakub Kicinski's avatar
      Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · 029294d0
      Jakub Kicinski authored 
      Daniel Borkmann says:

====================
pull-request: bpf 2023-04-08

We've added 4 non-merge commits during the last 11 day(s) which contain
a total of 5 files changed, 39 insertions(+), 6 deletions(-).

The main changes are:

1) Fix BPF TCP socket iterator to use correct helper for dropping
   socket's refcount, that is, sock_gen_put instead of sock_put,
   from Martin KaFai Lau.

2) Fix a BTI exception splat in BPF trampoline-generated code on arm64,
   from Xu Kuohai.

3) Fix a LongArch JIT error from missing BPF_NOSPEC no-op, from George Guo.

4) Fix dynamic XDP feature detection of veth in xdp_redirect selftest,
   from Lorenzo Bianconi.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: fix xdp_redirect xdp-features selftest for veth driver
  bpf, arm64: Fixed a BTI error on returning to patched function
  LoongArch, bpf: Fix jit to skip speculation barrier opcode
  bpf: tcp: Use sock_gen_put instead of sock_put in bpf_iter_tcp
====================

Link: https://lore.kernel.org/r/20230407224642.30906-1-daniel@iogearbox.netSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      029294d0
  11. 07 Apr, 2023 8 commits
    • Ahmed Zaki's avatar
      iavf: remove active_cvlans and active_svlans bitmaps · 9c85b7fa
      Ahmed Zaki authored 
      The VLAN filters info is currently being held in a list and 2 bitmaps
(active_cvlans and active_svlans). We are experiencing some racing where
data is not in sync in the list and bitmaps. For example, the VLAN is
initially added to the list but only when the PF replies, it is added to
the bitmap. If a user adds many V2 VLANS before the PF responds:

    while [ $((i++)) ]
        ip l add l eth0 name eth0.$i type vlan id $i

we might end up with more VLAN list entries than the designated limit.
Also, The "ip link show" will show more links added than the PF limit.

On the other and, the bitmaps are only used to check the number of VLAN
filters and to re-enable the filters when the interface goes from DOWN to
UP.

This patch gets rid of the bitmaps and uses the list only. To do that,
the states of the VLAN filter are modified:
1 - IAVF_VLAN_REMOVE: the entry needs to be totally removed after informing
  the PF. This is the "ip link del eth0.$i" path.
2 - IAVF_VLAN_DISABLE: (new) the netdev went down. The filter needs to be
  removed from the PF and then marked INACTIVE.
3 - IAVF_VLAN_INACTIVE: (new) no PF filter exists, but the user did not
  delete the VLAN.

Fixes: 48ccc43e ("iavf: Add support VIRTCHNL_VF_OFFLOAD_VLAN_V2 during netdev config")
Signed-off-by: default avatarAhmed Zaki <ahmed.zaki@intel.com>
Tested-by: default avatarRafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      9c85b7fa
    • Ahmed Zaki's avatar
      iavf: refactor VLAN filter states · 0c0da0e9
      Ahmed Zaki authored 
      The VLAN filter states are currently being saved as individual bits.
This is error prone as multiple bits might be mistakenly set.

Fix by replacing the bits with a single state enum. Also, add an
"ACTIVE" state for filters that are accepted by the PF.
Signed-off-by: default avatarAhmed Zaki <ahmed.zaki@intel.com>
Tested-by: default avatarRafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      0c0da0e9
    • David S. Miller's avatar
      Merge branch 'bonding-ns-validation-fixes' · b9881d9a
      David S. Miller authored 
      Hangbin Liu says:

====================
bonding: fix ns validation on backup slaves

The first patch fixed a ns validation issue on backup slaves. The second
patch re-format the bond option test and add a test lib file. The third
patch add the arp validate regression test for the kernel patch.

Here is the new bonding option test without the kernel fix:

]# ./bond_options.sh
TEST: prio (active-backup miimon primary_reselect 0)           [ OK ]
TEST: prio (active-backup miimon primary_reselect 1)           [ OK ]
TEST: prio (active-backup miimon primary_reselect 2)           [ OK ]
TEST: prio (active-backup arp_ip_target primary_reselect 0)    [ OK ]
TEST: prio (active-backup arp_ip_target primary_reselect 1)    [ OK ]
TEST: prio (active-backup arp_ip_target primary_reselect 2)    [ OK ]
TEST: prio (active-backup ns_ip6_target primary_reselect 0)    [ OK ]
TEST: prio (active-backup ns_ip6_target primary_reselect 1)    [ OK ]
TEST: prio (active-backup ns_ip6_target primary_reselect 2)    [ OK ]
TEST: prio (balance-tlb miimon primary_reselect 0)             [ OK ]
TEST: prio (balance-tlb miimon primary_reselect 1)             [ OK ]
TEST: prio (balance-tlb miimon primary_reselect 2)             [ OK ]
TEST: prio (balance-tlb arp_ip_target primary_reselect 0)      [ OK ]
TEST: prio (balance-tlb arp_ip_target primary_reselect 1)      [ OK ]
TEST: prio (balance-tlb arp_ip_target primary_reselect 2)      [ OK ]
TEST: prio (balance-tlb ns_ip6_target primary_reselect 0)      [ OK ]
TEST: prio (balance-tlb ns_ip6_target primary_reselect 1)      [ OK ]
TEST: prio (balance-tlb ns_ip6_target primary_reselect 2)      [ OK ]
TEST: prio (balance-alb miimon primary_reselect 0)             [ OK ]
TEST: prio (balance-alb miimon primary_reselect 1)             [ OK ]
TEST: prio (balance-alb miimon primary_reselect 2)             [ OK ]
TEST: prio (balance-alb arp_ip_target primary_reselect 0)      [ OK ]
TEST: prio (balance-alb arp_ip_target primary_reselect 1)      [ OK ]
TEST: prio (balance-alb arp_ip_target primary_reselect 2)      [ OK ]
TEST: prio (balance-alb ns_ip6_target primary_reselect 0)      [ OK ]
TEST: prio (balance-alb ns_ip6_target primary_reselect 1)      [ OK ]
TEST: prio (balance-alb ns_ip6_target primary_reselect 2)      [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 0)  [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 1)  [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 2)  [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 3)  [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 4)  [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 5)  [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 6)  [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 0)  [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 1)  [ OK ]
TEST: arp_validate (interface eth1 mii_status DOWN)                 [FAIL]
TEST: arp_validate (interface eth2 mii_status DOWN)                 [FAIL]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 2)  [FAIL]
TEST: arp_validate (interface eth1 mii_status DOWN)                 [FAIL]
TEST: arp_validate (interface eth2 mii_status DOWN)                 [FAIL]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 3)  [FAIL]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 4)  [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 5)  [ OK ]
TEST: arp_validate (interface eth1 mii_status DOWN)                 [FAIL]
TEST: arp_validate (interface eth2 mii_status DOWN)                 [FAIL]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 6)  [FAIL]

Here is the test result after the kernel fix:
TEST: arp_validate (active-backup arp_ip_target arp_validate 0)  [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 1)  [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 2)  [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 3)  [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 4)  [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 5)  [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 6)  [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 0)  [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 1)  [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 2)  [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 3)  [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 4)  [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 5)  [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 6)  [ OK ]
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b9881d9a
    • Hangbin Liu's avatar
      selftests: bonding: add arp validate test · 2e825f8a
      Hangbin Liu authored 
      This patch add bonding arp validate tests with mode active backup,
monitor arp_ip_target and ns_ip6_target. It also checks mii_status
to make sure all slaves are UP.
Acked-by: default avatarJonathan Toppins <jtoppins@redhat.com>
Acked-by: default avatarJay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2e825f8a
    • Hangbin Liu's avatar
      selftests: bonding: re-format bond option tests · 481b56e0
      Hangbin Liu authored 
      To improve the testing process for bond options, A new bond topology lib
is added to our testing setup. The current option_prio.sh file will be
renamed to bond_options.sh so that all bonding options can be tested here.
Specifically, for priority testing, we will run all tests using modes
1, 5, and 6. These changes will help us streamline the testing process
and ensure that our bond options are rigorously evaluated.
Acked-by: default avatarJay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
Acked-by: default avatarJonathan Toppins <jtoppins@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      481b56e0
    • Hangbin Liu's avatar
      bonding: fix ns validation on backup slaves · 4598380f
      Hangbin Liu authored 
      When arp_validate is set to 2, 3, or 6, validation is performed for
backup slaves as well. As stated in the bond documentation, validation
involves checking the broadcast ARP request sent out via the active
slave. This helps determine which slaves are more likely to function in
the event of an active slave failure.

However, when the target is an IPv6 address, the NS message sent from
the active interface is not checked on backup slaves. Additionally,
based on the bond_arp_rcv() rule b, we must reverse the saddr and daddr
when checking the NS message.

Note that when checking the NS message, the destination address is a
multicast address. Therefore, we must convert the target address to
solicited multicast in the bond_get_targets_ip6() function.

Prior to the fix, the backup slaves had a mii status of "down", but
after the fix, all of the slaves' mii status was updated to "UP".

Fixes: 4e24be01 ("bonding: add new parameter ns_targets")
Reviewed-by: default avatarJonathan Toppins <jtoppins@redhat.com>
Acked-by: default avatarJay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4598380f
    • YueHaibing's avatar
      tcp: restrict net.ipv4.tcp_app_win · dc5110c2
      YueHaibing authored 
      UBSAN: shift-out-of-bounds in net/ipv4/tcp_input.c:555:23
shift exponent 255 is too large for 32-bit type 'int'
CPU: 1 PID: 7907 Comm: ssh Not tainted 6.3.0-rc4-00161-g62bad54b-dirty #206
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x136/0x150
 __ubsan_handle_shift_out_of_bounds+0x21f/0x5a0
 tcp_init_transfer.cold+0x3a/0xb9
 tcp_finish_connect+0x1d0/0x620
 tcp_rcv_state_process+0xd78/0x4d60
 tcp_v4_do_rcv+0x33d/0x9d0
 __release_sock+0x133/0x3b0
 release_sock+0x58/0x1b0

'maxwin' is int, shifting int for 32 or more bits is undefined behaviour.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: default avatarYueHaibing <yuehaibing@huawei.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Reviewed-by: default avatarKuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dc5110c2
    • Harshit Mogalapalli's avatar
      niu: Fix missing unwind goto in niu_alloc_channels() · 8ce07be7
      Harshit Mogalapalli authored 
      Smatch reports: drivers/net/ethernet/sun/niu.c:4525
	niu_alloc_channels() warn: missing unwind goto?

If niu_rbr_fill() fails, then we are directly returning 'err' without
freeing the channels.

Fix this by changing direct return to a goto 'out_err'.

Fixes: a3138df9 ("[NIU]: Add Sun Neptune ethernet driver.")
Signed-off-by: default avatarHarshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8ce07be7
  13. 06 Apr, 2023 11 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7