Currently CALL_ON_STACK saves r15 as back_chain in the first stack frame of
the stack we about to switch to. But if a function which uses CALL_ON_STACK
calls other function it allocates a stack frame for a callee. In this
case r15 is pointing to a callee stack frame and not a stack frame of
function itself. This results in dummy unwinding entry with random
sp and ip values.

Introduce and utilize current_frame_address macro to get an address of
actual function stack frame.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Avoid mixture of task == NULL and task == current meaning the same
thing and simply always initialize task with current in unwind_start.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Make sure preemption is disabled when temporary switching to nodat
stack with CALL_ON_STACK helper, because nodat stack is per cpu.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

disabled_wait uses _THIS_IP_ and assumes that compiler would inline it.
Make sure this assumption is always correct by utilizing __always_inline.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

getcpu reads the required values for cpu and node with two
instructions. This might lead to an inconsistent result if user space
gets preempted and migrated to a different CPU between the two
instructions.

Fix this by using just a single instruction to read both values at
once.

This is currently rather a theoretical bug, since there is no real
NUMA support available (except for NUMA emulation).
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

When a secondary CPU is brought up it must initialize its control
registers. CPU A which triggers that a secondary CPU B is brought up
stores its control register contents into the lowcore of new CPU B,
which then loads these values on startup.

This is problematic in various ways: the control register which
contains the home space ASCE will correctly contain the kernel ASCE;
however control registers for primary and secondary ASCEs are
initialized with whatever values were present in CPU A.

Typically:
- the primary ASCE will contain the user process ASCE of the process
  that triggered onlining of CPU B.
- the secondary ASCE will contain the percpu VDSO ASCE of CPU A.

Due to lazy ASCE handling we may also end up with other combinations.

When then CPU B switches to a different process (!= idle) it will
fixup the primary ASCE. However the problem is that the (wrong) ASCE
from CPU A was loaded into control register 1: as soon as an ASCE is
attached (aka loaded) a CPU is free to generate TLB entries using that
address space.
Even though it is very unlikey that CPU B will actually generate such
entries, this could result in TLB entries of the address space of the
process that ran on CPU A. These entries shouldn't exist at all and
could cause problems later on.

Furthermore the secondary ASCE of CPU B will not be updated correctly.
This means that processes may see wrong results or even crash if they
access VDSO data on CPU B. The correct VDSO ASCE will eventually be
loaded on return to user space as soon as the kernel executed a call
to strnlen_user or an atomic futex operation on CPU B.

Fix both issues by intializing the to be loaded control register
contents with the correct ASCEs and also enforce (re-)loading of the
ASCEs upon first context switch and return to user space.

Fixes: 0aaba41b ("s390: remove all code using the access register mode")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

This patch introduces support for a new architectured reply
code 0x8B indicating that a hypervisor layer (if any) has
rejected an ap message.

Linux may run as a guest on top of a hypervisor like zVM
or KVM. So the crypto hardware seen by the ap bus may be
restricted by the hypervisor for example only a subset like
only clear key crypto requests may be supported. Other
requests will be filtered out - rejected by the hypervisor.
The new reply code 0x8B will appear in such cases and needs
to get recognized by the ap bus and zcrypt device driver zoo.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

On s390 bpf_get_stack_raw_tp() returns 0 entries for both kernel and
user stacks. While there is no practical unwinding solution for userspace
on s390 at this moment, there certainly is a kernel unwinder. However,
it is not properly integrated with BPF.

In order to start unwinding, bpf_get_stack_raw_tp() obtains the current
kernel register values using perf_fetch_caller_regs(), which is not
implemented for s390. The actual unwinding then happens by passing those
registers to perf_callchain_kernel().

Implement perf_arch_fetch_caller_regs() for s390, where
__builtin_frame_address(0) points to back_chain.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Pull s390 updates from Vasily Gorbik:

 - Adjust PMU device drivers registration to avoid WARN_ON and few other
   perf improvements.

 - Enhance tracing in vfio-ccw.

 - Few stack unwinder fixes and improvements, convert get_wchan custom
   stack unwinding to generic api usage.

 - Fixes for mm helpers issues uncovered with tests validating
   architecture page table helpers.

 - Fix noexec bit handling when hardware doesn't support it.

 - Fix memleak and unsigned value compared with zero bugs in crypto
   code. Minor code simplification.

 - Fix crash during kdump with kasan enabled kernel.

 - Switch bug and alternatives from asm to asm_inline to improve
   inlining decisions.

 - Use 'depends on cc-option' for MARCH and TUNE options in Kconfig, add
   z13s and z14 ZR1 to TUNE descriptions.

 - Minor head64.S simplification.

 - Fix physical to logical CPU map for SMT.

 - Several cleanups in qdio code.

 - Other minor cleanups and fixes all over the code.

* tag 's390-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
  s390/cpumf: Adjust registration of s390 PMU device drivers
  s390/smp: fix physical to logical CPU map for SMT
  s390/early: move access registers setup in C code
  s390/head64: remove unnecessary vdso_per_cpu_data setup
  s390/early: move control registers setup in C code
  s390/kasan: support memcpy_real with TRACE_IRQFLAGS
  s390/crypto: Fix unsigned variable compared with zero
  s390/pkey: use memdup_user() to simplify code
  s390/pkey: fix memory leak within _copy_apqns_from_user()
  s390/disassembler: don't hide instruction addresses
  s390/cpum_sf: Assign error value to err variable
  s390/cpum_sf: Replace function name in debug statements
  s390/cpum_sf: Use consistant debug print format for sampling
  s390/unwind: drop unnecessary code around calling ftrace_graph_ret_addr()
  s390: add error handling to perf_callchain_kernel
  s390: always inline current_stack_pointer()
  s390/mm: add mm_pxd_folded() checks to pxd_free()
  s390/mm: properly clear _PAGE_NOEXEC bit when it is not supported
  s390/mm: simplify page table helpers for large entries
  s390/mm: make pmd/pud_bad() report large entries as bad
  ...

Pull arm64 updates from Catalin Marinas:
 "Apart from the arm64-specific bits (core arch and perf, new arm64
  selftests), it touches the generic cow_user_page() (reviewed by
  Kirill) together with a macro for x86 to preserve the existing
  behaviour on this architecture.

  Summary:

   - On ARMv8 CPUs without hardware updates of the access flag, avoid
     failing cow_user_page() on PFN mappings if the pte is old. The
     patches introduce an arch_faults_on_old_pte() macro, defined as
     false on x86. When true, cow_user_page() makes the pte young before
     attempting __copy_from_user_inatomic().

   - Covert the synchronous exception handling paths in
     arch/arm64/kernel/entry.S to C.

   - FTRACE_WITH_REGS support for arm64.

   - ZONE_DMA re-introduced on arm64 to support Raspberry Pi 4

   - Several kselftest cases specific to arm64, together with a
     MAINTAINERS update for these files (moved to the ARM64 PORT entry).

   - Workaround for a Neoverse-N1 erratum where the CPU may fetch stale
     instructions under certain conditions.

   - Workaround for Cortex-A57 and A72 errata where the CPU may
     speculatively execute an AT instruction and associate a VMID with
     the wrong guest page tables (corrupting the TLB).

   - Perf updates for arm64: additional PMU topologies on HiSilicon
     platforms, support for CCN-512 interconnect, AXI ID filtering in
     the IMX8 DDR PMU, support for the CCPI2 uncore PMU in ThunderX2.

   - GICv3 optimisation to avoid a heavy barrier when accessing the
     ICC_PMR_EL1 register.

   - ELF HWCAP documentation updates and clean-up.

   - SMC calling convention conduit code clean-up.

   - KASLR diagnostics printed during boot

   - NVIDIA Carmel CPU added to the KPTI whitelist

   - Some arm64 mm clean-ups: use generic free_initrd_mem(), remove
     stale macro, simplify calculation in __create_pgd_mapping(), typos.

   - Kconfig clean-ups: CMDLINE_FORCE to depend on CMDLINE, choice for
     endinanness to help with allmodconfig"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
  arm64: Kconfig: add a choice for endianness
  kselftest: arm64: fix spelling mistake "contiguos" -> "contiguous"
  arm64: Kconfig: make CMDLINE_FORCE depend on CMDLINE
  MAINTAINERS: Add arm64 selftests to the ARM64 PORT entry
  arm64: kaslr: Check command line before looking for a seed
  arm64: kaslr: Announce KASLR status on boot
  kselftest: arm64: fake_sigreturn_misaligned_sp
  kselftest: arm64: fake_sigreturn_bad_size
  kselftest: arm64: fake_sigreturn_duplicated_fpsimd
  kselftest: arm64: fake_sigreturn_missing_fpsimd
  kselftest: arm64: fake_sigreturn_bad_size_for_magic0
  kselftest: arm64: fake_sigreturn_bad_magic
  kselftest: arm64: add helper get_current_context
  kselftest: arm64: extend test_init functionalities
  kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht]
  kselftest: arm64: mangle_pstate_invalid_daif_bits
  kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils
  kselftest: arm64: extend toplevel skeleton Makefile
  drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform
  arm64: mm: reserve CMA and crashkernel in ZONE_DMA32
  ...

Merge tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest KUnit support gtom Shuah Khan:
 "This adds KUnit, a lightweight unit testing and mocking framework for
  the Linux kernel from Brendan Higgins.

  KUnit is not an end-to-end testing framework. It is currently
  supported on UML and sub-systems can write unit tests and run them in
  UML env. KUnit documentation is included in this update.

  In addition, this Kunit update adds 3 new kunit tests:

   - proc sysctl test from Iurii Zaikin

   - the 'list' doubly linked list test from David Gow

   - ext4 tests for decoding extended timestamps from Iurii Zaikin

  In the future KUnit will be linked to Kselftest framework to provide a
  way to trigger KUnit tests from user-space"

* tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits)
  lib/list-test: add a test for the 'list' doubly linked list
  ext4: add kunit test for decoding extended timestamps
  Documentation: kunit: Fix verification command
  kunit: Fix '--build_dir' option
  kunit: fix failure to build without printk
  MAINTAINERS: add proc sysctl KUnit test to PROC SYSCTL section
  kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec()
  MAINTAINERS: add entry for KUnit the unit testing framework
  Documentation: kunit: add documentation for KUnit
  kunit: defconfig: add defconfigs for building KUnit tests
  kunit: tool: add Python wrappers for running KUnit tests
  kunit: test: add tests for KUnit managed resources
  kunit: test: add the concept of assertions
  kunit: test: add tests for kunit test abort
  kunit: test: add support for test abort
  objtool: add kunit_try_catch_throw to the noreturn list
  kunit: test: add initial tests
  lib: enable building KUnit in lib/
  kunit: test: add the concept of expectations
  kunit: test: add assertion printing library
  ...

Merge tag 'linux-kselftest-5.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "This consists of several fixes to tests and framework.

  Masami Hiramatsu fixed several tests to build and run correctly on arm
  and other 32bit architectures"

* tag 'linux-kselftest-5.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: sync: Fix cast warnings on arm
  selftests: net: Fix printf format warnings on arm
  selftests: net: Use size_t and ssize_t for counting file size
  selftests: vm: Build/Run 64bit tests only on 64bit arch
  selftests: proc: Make va_max 1MB
  kselftest: Fix NULL INSTALL_PATH for TARGETS runlist
  selftests: Move kselftest_module.sh into kselftest/
  selftests: gen_kselftest_tar.sh: Do not clobber kselftest/
  selftests: breakpoints: Fix a typo of function name
  selftests: Fix O= and KBUILD_OUTPUT handling for relative paths

Pull fsverity updates from Eric Biggers:
 "Expose the fs-verity bit through statx()"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  docs: fs-verity: mention statx() support
  f2fs: support STATX_ATTR_VERITY
  ext4: support STATX_ATTR_VERITY
  statx: define STATX_ATTR_VERITY
  docs: fs-verity: document first supported kernel version

Pull fscrypt updates from Eric Biggers:

 - Add the IV_INO_LBLK_64 encryption policy flag which modifies the
   encryption to be optimized for UFS inline encryption hardware.

 - For AES-128-CBC, use the crypto API's implementation of ESSIV (which
   was added in 5.4) rather than doing ESSIV manually.

 - A few other cleanups.

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  f2fs: add support for IV_INO_LBLK_64 encryption policies
  ext4: add support for IV_INO_LBLK_64 encryption policies
  fscrypt: add support for IV_INO_LBLK_64 policies
  fscrypt: avoid data race on fscrypt_mode::logged_impl_name
  docs: ioctl-number: document fscrypt ioctl numbers
  fscrypt: zeroize fscrypt_info before freeing
  fscrypt: remove struct fscrypt_ctx
  fscrypt: invoke crypto API for ESSIV handling

Pull AFFS updates from David Sterba:
 "A minor bugfix and cleanup for AFFS"

* tag 'affs-for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  affs: fix a memory leak in affs_remount
  affs: Replace binary semaphores with mutexes

Pull btrfs updates from David Sterba:
 "User visible changes:
   - new block group profiles: RAID1 with 3- and 4- copies
       - RAID1 in btrfs has always 2 copies, now add support for 3 and 4
       - this is an incompat feature (named RAID1C34)
       - recommended use of RAID1C3 is replacement of RAID6 profile on
         metadata, this brings a more reliable resiliency against 2
         device loss/damage

   - support for new checksums
       - per-filesystem, set at mkfs time
       - fast hash (crc32c successor): xxhash, 64bit digest
       - strong hashes (both 256bit): sha256 (slower, FIPS), blake2b
         (faster)
       - the blake2b module goes via the crypto tree, btrfs.ko has a
         soft dependency

   - speed up lseek, don't take inode locks unnecessarily, this can
     speed up parallel SEEK_CUR/SEEK_SET/SEEK_END by 80%

   - send:
       - allow clone operations within the same file
       - limit maximum number of sent clone references to avoid slow
         backref walking

   - error message improvements: device scan prints process name and PID

  Core changes:
   - cleanups
       - remove unique workqueue helpers, used to provide a way to avoid
         deadlocks in the workqueue code, now done in a simpler way
       - remove lots of indirect function calls in compression code
       - extent IO tree code moved out of extent_io.c
       - cleanup backup superblock handling at mount time
       - transaction life cycle documentation and cleanups
       - locking code cleanups, annotations and documentation
       - add more cold, const, pure function attributes
       - removal of unused or redundant struct members or variables

   - new tree-checker sanity tests
       - try to detect missing INODE_ITEM, cross-reference checks of
         DIR_ITEM, DIR_INDEX, INODE_REF, and XATTR_* items

   - remove own bio scheduling code (used to avoid checksum submissions
     being stuck behind other IO), replaced by cgroup controller-based
     code to allow better control and avoid priority inversions in cases
     where the custom and cgroup scheduling disagreed

  Fixes:
   - avoid getting stuck during cyclic writebacks

   - fix trimming of ranges crossing block group boundaries

   - fix rename exchange on subvolumes, all involved subvolumes need to
     be recorded in the transaction"

* tag 'for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (137 commits)
  btrfs: drop bdev argument from submit_extent_page
  btrfs: remove extent_map::bdev
  btrfs: drop bio_set_dev where not needed
  btrfs: get bdev directly from fs_devices in submit_extent_page
  btrfs: record all roots for rename exchange on a subvol
  Btrfs: fix block group remaining RO forever after error during device replace
  btrfs: scrub: Don't check free space before marking a block group RO
  btrfs: change btrfs_fs_devices::rotating to bool
  btrfs: change btrfs_fs_devices::seeding to bool
  btrfs: rename btrfs_block_group_cache
  btrfs: block-group: Reuse the item key from caller of read_one_block_group()
  btrfs: block-group: Refactor btrfs_read_block_groups()
  btrfs: document extent buffer locking
  btrfs: access eb::blocking_writers according to ACCESS_ONCE policies
  btrfs: set blocking_writers directly, no increment or decrement
  btrfs: merge blocking_writers branches in btrfs_tree_read_lock
  btrfs: drop incompat bit for raid1c34 after last block group is gone
  btrfs: add incompat for raid1 with 3, 4 copies
  btrfs: add support for 4-copy replication (raid1c4)
  btrfs: add support for 3-copy replication (raid1c3)
  ...

Pull MTD updates from Miquel Raynal:
 "MTD core:
   - drop inactive maintainers, update the repositories and add IRC
     channel
   - debugfs functions improvements
   - initialize more structure parameters
   - misc fixes reported by robots

  MTD devices:
   - spear_smi: Fixed Write Burst mode
   - new Intel IXP4xx flash probing hook

  Raw NAND core:
   - useless extra checks dropped
   - update the detection of the bad block markers position

  Raw NAND controller drivers:
   - Cadence: new driver
   - Brcmnand: support for flash-dma v0 + fixes
   - Denali: drop support for the legacy controller/chip DT representation
   - superfluous dev_err() calls removed

  SPI NOR core changes:
   - introduce 'struct spi_nor_controller_ops'
   - clean the Register Operations methods
   - use dev_dbg insted of dev_err for low level info
   - fix retlen handling in sst_write()
   - fix silent truncations in spi_nor_read and spi_nor_read_raw()
   - fix the clearing of QE bit on lock()/unlock()
   - rework the disabling of the block write protection
   - rework the Quad Enable methods
   - make sure nor->spimem and nor->controller_ops are mutually exclusive
   - set default Quad Enable method for ISSI flashes
   - add support for few flashes

  SPI NOR controller drivers changes:
   - intel-spi:
      - support chips without software sequencer
      - add support for Intel Cannon Lake and Intel Comet Lake-H flashes

  CFI core changes:
   - code cleanups related useless initializers and coding style issues
   - fix for a possible double free problem in cfi_cmdset_0002
   - improved HyperFlash error reporting and handling in cfi_cmdset_0002 core"

* tag 'mtd/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (73 commits)
  mtd: devices: fix mchp23k256 read and write
  mtd: no need to check return value of debugfs_create functions
  mtd: spi-nor: Set default Quad Enable method for ISSI flashes
  mtd: spi-nor: Add support for is25wp256
  mtd: spi-nor: Add support for w25q256jw
  mtd: spi-nor: Move condition to avoid a NULL check
  mtd: spi-nor: Make sure nor->spimem and nor->controller_ops are mutually exclusive
  mtd: spi-nor: Rename Quad Enable methods
  mtd: spi-nor: Merge spansion Quad Enable methods
  mtd: spi-nor: Rename CR_QUAD_EN_SPAN to SR2_QUAD_EN_BIT1
  mtd: spi-nor: Extend the SR Read Back test
  mtd: spi-nor: Rework the disabling of block write protection
  mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()
  mtd: cfi_cmdset_0002: fix delayed error detection on HyperFlash
  mtd: cfi_cmdset_0002: only check errors when ready in cfi_check_err_status()
  mtd: cfi_cmdset_0002: don't free cfi->cfiq in error path of cfi_amdstd_setup()
  mtd: cfi_cmdset_*: kill useless 'ret' variable initializers
  mtd: cfi_util: use DIV_ROUND_UP() in cfi_udelay()
  mtd: spi-nor: Print debug message when the read back test fails
  mtd: spi-nor: Check all the bits written, not just the BP ones
  ...

Merge tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Fix DM core to disallow stacking request-based DM on partitions.

 - Fix DM raid target to properly resync raidset even if bitmap needed
   additional pages.

 - Fix DM crypt performance regression due to use of WQ_HIGHPRI for the
   IO and crypt workqueues.

 - Fix DM integrity metadata layout that was aligned on 128K boundary
   rather than the intended 4K boundary (removes 124K of wasted space
   for each metadata block).

 - Improve the DM thin, cache and clone targets to use spin_lock_irq
   rather than spin_lock_irqsave where possible.

 - Fix DM thin single thread performance that was lost due to needless
   workqueue wakeups.

 - Fix DM zoned target performance that was lost due to excessive
   backing device checks.

 - Add ability to trigger write failure with the DM dust test target.

 - Fix whitespace indentation in drivers/md/Kconfig.

 - Various smalls fixes and cleanups (e.g. use struct_size, fix
   uninitialized variable, variable renames, etc).

* tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits)
  Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"
  dm: Fix Kconfig indentation
  dm thin: wakeup worker only when deferred bios exist
  dm integrity: fix excessive alignment of metadata runs
  dm raid: Remove unnecessary negation of a shift in raid10_format_to_md_layout
  dm zoned: reduce overhead of backing device checks
  dm dust: add limited write failure mode
  dm dust: change ret to r in dust_map_read and dust_map
  dm dust: change result vars to r
  dm cache: replace spin_lock_irqsave with spin_lock_irq
  dm bio prison: replace spin_lock_irqsave with spin_lock_irq
  dm thin: replace spin_lock_irqsave with spin_lock_irq
  dm clone: add bucket_lock_irq/bucket_unlock_irq helpers
  dm clone: replace spin_lock_irqsave with spin_lock_irq
  dm writecache: handle REQ_FUA
  dm writecache: fix uninitialized variable warning
  dm stripe: use struct_size() in kmalloc()
  dm raid: streamline rs_get_progress() and its raid_status() caller side
  dm raid: simplify rs_setup_recovery call chain
  dm raid: to ensure resynchronization, perform raid set grow in preresume
  ...

Pull disk revalidation updates from Jens Axboe:
 "This continues the work that Jan Kara started to thoroughly cleanup
  and consolidate how we handle rescans and revalidations"

* tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block:
  block: move clearing bd_invalidated into check_disk_size_change
  block: remove (__)blkdev_reread_part as an exported API
  block: fix bdev_disk_changed for non-partitioned devices
  block: move rescan_partitions to fs/block_dev.c
  block: merge invalidate_partitions into rescan_partitions
  block: refactor rescan_partitions

Pull zoned block device update from Jens Axboe:
 "Enhancements and improvements to the zoned device support"

* tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block:
  scsi: sd_zbc: Remove set but not used variable 'buflen'
  block: rework zone reporting
  scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  null_blk: Add zone_nr_conv to features
  null_blk: clean up report zones
  null_blk: clean up the block device operations
  block: Remove partition support for zoned block devices
  block: Simplify report zones execution
  block: cleanup the !zoned case in blk_revalidate_disk_zones
  block: Enhance blk_revalidate_disk_zones()

Pull additional block driver updates from Jens Axboe:
 "Here's another block driver update, done to avoid conflicts with the
  zoned changes coming next.

  This contains:

   - Prepare SCSI sd for zone open/close/finish support

   - Small NVMe pull request
        - hwmon support (Akinobu)
        - add new co-maintainer (Christoph)
        - work-around for a discard issue on non-conformant drives
          (Eduard)

   - Small nbd leak fix"

* tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block:
  nbd: prevent memory leak
  nvme: hwmon: add quirk to avoid changing temperature threshold
  nvme: hwmon: provide temperature min and max values for each sensor
  nvmet: add another maintainer
  nvme: Discard workaround for non-conformant devices
  nvme: Add hardware monitoring support
  scsi: sd_zbc: add zone open, close, and finish support

Pull block driver updates from Jens Axboe:
 "Here are the main block driver updates for 5.5. Nothing major in here,
  mostly just fixes. This contains:

   - a set of bcache changes via Coly

   - MD changes from Song

   - loop unmap write-zeroes fix (Darrick)

   - spelling fixes (Geert)

   - zoned additions cleanups to null_blk/dm (Ajay)

   - allow null_blk online submit queue changes (Bart)

   - NVMe changes via Keith, nothing major here either"

* tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits)
  Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()"
  drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
  drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
  bcache: don't export symbols
  bcache: remove the extra cflags for request.o
  bcache: at least try to shrink 1 node in bch_mca_scan()
  bcache: add idle_max_writeback_rate sysfs interface
  bcache: add code comments in bch_btree_leaf_dirty()
  bcache: fix deadlock in bcache_allocator
  bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front()
  bcache: deleted code comments for dead code in bch_data_insert_keys()
  bcache: add more accurate error messages in read_super()
  bcache: fix static checker warning in bcache_device_free()
  bcache: fix a lost wake-up problem caused by mca_cannibalize_lock
  bcache: fix fifo index swapping condition in journal_pin_cmp()
  md/raid10: prevent access of uninitialized resync_pages offset
  md: avoid invalid memory access for array sb->dev_roles
  md/raid1: avoid soft lockup under high load
  null_blk: add zone open, close, and finish support
  dm: add zone open, close and finish support
  ...

Pull core block updates from Jens Axboe:
 "Due to more granular branches, this one is small and will be followed
  with other core branches that add specific features. I meant to just
  have a core and drivers branch, but external dependencies we ended up
  adding a few more that are also core.

  The changes are:

   - Fixes and improvements for the zoned device support (Ajay, Damien)

   - sed-opal table writing and datastore UID (Revanth)

   - blk-cgroup (and bfq) blk-cgroup stat fixes (Tejun)

   - Improvements to the block stats tracking (Pavel)

   - Fix for overruning sysfs buffer for large number of CPUs (Ming)

   - Optimization for small IO (Ming, Christoph)

   - Fix typo in RWH lifetime hint (Eugene)

   - Dead code removal and documentation (Bart)

   - Reduction in memory usage for queue and tag set (Bart)

   - Kerneldoc header documentation (André)

   - Device/partition revalidation fixes (Jan)

   - Stats tracking for flush requests (Konstantin)

   - Various other little fixes here and there (et al)"

* tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-block: (48 commits)
  Revert "block: split bio if the only bvec's length is > SZ_4K"
  block: add iostat counters for flush requests
  block,bfq: Skip tracing hooks if possible
  block: sed-opal: Introduce SUM_SET_LIST parameter and append it using 'add_token_u64'
  blk-cgroup: cgroup_rstat_updated() shouldn't be called on cgroup1
  block: Don't disable interrupts in trigger_softirq()
  sbitmap: Delete sbitmap_any_bit_clear()
  blk-mq: Delete blk_mq_has_free_tags() and blk_mq_can_queue()
  block: split bio if the only bvec's length is > SZ_4K
  block: still try to split bio if the bvec crosses pages
  blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTAT
  blk-cgroup: reimplement basic IO stats using cgroup rstat
  blk-cgroup: remove now unused blkg_print_stat_{bytes|ios}_recursive()
  blk-throtl: stop using blkg->stat_bytes and ->stat_ios
  bfq-iosched: stop using blkg->stat_bytes and ->stat_ios
  bfq-iosched: relocate bfqg_*rwstat*() helpers
  block: add zone open, close and finish ioctl support
  block: add zone open, close and finish operations
  block: Simplify REQ_OP_ZONE_RESET_ALL handling
  block: Remove REQ_OP_ZONE_RESET plugging
  ...

Pull libata updates from Jens Axboe:
 "Just a few fixes all over the place, support for the Annapurna SATA
  controller, and a patchset that cleans up the error defines and
  ultimately fixes anissue with sata_mv"

* tag 'for-5.5/libata-20191121' of git://git.kernel.dk/linux-block:
  ata: pata_artop: make arrays static const, makes object smaller
  ata_piix: remove open-coded dmi_match(DMI_OEM_STRING)
  ata: sata_mv, avoid trigerrable BUG_ON
  ata: make qc_prep return ata_completion_errors
  ata: define AC_ERR_OK
  ata: Documentation, fix function names
  libata: Ensure ata_port probe has completed before detach
  ahci: tegra: use regulator_bulk_set_supply_names()
  ahci: Add support for Amazon's Annapurna Labs SATA controller

Pull io_uring updates from Jens Axboe:
 "A lot of stuff has been going on this cycle, with improving the
  support for networked IO (and hence unbounded request completion
  times) being one of the major themes. There's been a set of fixes done
  this week, I'll send those out as well once we're certain we're fully
  happy with them.

  This contains:

   - Unification of the "normal" submit path and the SQPOLL path (Pavel)

   - Support for sparse (and bigger) file sets, and updating of those
     file sets without needing to unregister/register again.

   - Independently sized CQ ring, instead of just making it always 2x
     the SQ ring size. This makes it more flexible for networked
     applications.

   - Support for overflowed CQ ring, never dropping events but providing
     backpressure on submits.

   - Add support for absolute timeouts, not just relative ones.

   - Support for generic cancellations. This divorces io_uring from
     workqueues as well, which additionally gets us one step closer to
     generic async system call support.

   - With cancellations, we can support grabbing the process file table
     as well, just like we do mm context. This allows support for system
     calls that create file descriptors, like accept4() support that's
     built on top of that.

   - Support for io_uring tracing (Dmitrii)

   - Support for linked timeouts. These abort an operation if it isn't
     completed by the time noted in the linke timeout.

   - Speedup tracking of poll requests

   - Various cleanups making the coder easier to follow (Jackie, Pavel,
     Bob, YueHaibing, me)

   - Update MAINTAINERS with new io_uring list"

* tag 'for-5.5/io_uring-20191121' of git://git.kernel.dk/linux-block: (64 commits)
  io_uring: make POLL_ADD/POLL_REMOVE scale better
  io-wq: remove now redundant struct io_wq_nulls_list
  io_uring: Fix getting file for non-fd opcodes
  io_uring: introduce req_need_defer()
  io_uring: clean up io_uring_cancel_files()
  io-wq: ensure free/busy list browsing see all items
  io-wq: ensure we have a stable view of ->cur_work for cancellations
  io_wq: add get/put_work handlers to io_wq_create()
  io_uring: check for validity of ->rings in teardown
  io_uring: fix potential deadlock in io_poll_wake()
  io_uring: use correct "is IO worker" helper
  io_uring: fix -ENOENT issue with linked timer with short timeout
  io_uring: don't do flush cancel under inflight_lock
  io_uring: flag SQPOLL busy condition to userspace
  io_uring: make ASYNC_CANCEL work with poll and timeout
  io_uring: provide fallback request for OOM situations
  io_uring: convert accept4() -ERESTARTSYS into -EINTR
  io_uring: fix error clear of ->file_table in io_sqe_files_register()
  io_uring: separate the io_free_req and io_free_req_find_next interface
  io_uring: keep io_put_req only responsible for release and put req
  ...

Pull tpmd updates from Jarkko Sakkinen:

 - support for Cr50 fTPM

 - support for fTPM on AMD Zen+ CPUs

 - TPM 2.0 trusted keys code relocated from drivers/char/tpm to
   security/keys

* tag 'tpmdd-next-20191112' of git://git.infradead.org/users/jjs/linux-tpmdd:
  KEYS: trusted: Remove set but not used variable 'keyhndl'
  tpm: Switch to platform_get_irq_optional()
  tpm_crb: fix fTPM on AMD Zen+ CPUs
  KEYS: trusted: Move TPM2 trusted keys code
  KEYS: trusted: Create trusted keys subsystem
  KEYS: Use common tpm_buf for trusted and asymmetric keys
  tpm: Move tpm_buf code to include/linux/
  tpm: use GFP_KERNEL instead of GFP_HIGHMEM for tpm_buf
  tpm: add check after commands attribs tab allocation
  tpm: tpm_tis_spi: Drop THIS_MODULE usage from driver struct
  tpm: tpm_tis_spi: Cleanup includes
  tpm: tpm_tis_spi: Support cr50 devices
  tpm: tpm_tis_spi: Introduce a flow control callback
  tpm: Add a flag to indicate TPM power is managed by firmware
  dt-bindings: tpm: document properties for cr50
  tpm_tis: override durations for STM tpm with firmware 1.2.8.28
  tpm: provide a way to override the chip returned durations
  tpm: Remove duplicate code from caps_show() in tpm-sysfs.c

fdget_pos() is used by file operations that will read and update f_pos:
things like "read()", "write()" and "lseek()" (but not, for example,
"pread()/pwrite" that get their file positions elsewhere).

However, it had two separate escape clauses for this, because not
everybody wants or needs serialization of the file position.

The first and most obvious case is the "file descriptor doesn't have a
position at all", ie a stream-like file.  Except we didn't actually use
FMODE_STREAM, but instead used FMODE_ATOMIC_POS.  The reason for that
was that FMODE_STREAM didn't exist back in the days, but also that we
didn't want to mark all the special cases, so we only marked the ones
that _required_ position atomicity according to POSIX - regular files
and directories.

The case one was intentionally lazy, but now that we _do_ have
FMODE_STREAM we could and should just use it.  With the change to use
FMODE_STREAM, there are no remaining uses for FMODE_ATOMIC_POS, and all
the code to set it is deleted.

Any cases where we don't want the serialization because the driver (or
subsystem) doesn't use the file position should just be updated to do
"stream_open()".  We've done that for all the obvious and common
situations, we may need a few more.  Quoting Kirill Smelkov in the
original FMODE_STREAM thread (see link below for full email):

 "And I appreciate if people could help at least somehow with "getting
  rid of mixed case entirely" (i.e. always lock f_pos_lock on
  !FMODE_STREAM), because this transition starts to diverge from my
  particular use-case too far. To me it makes sense to do that
  transition as follows:

   - convert nonseekable_open -> stream_open via stream_open.cocci;
   - audit other nonseekable_open calls and convert left users that
     truly don't depend on position to stream_open;
   - extend stream_open.cocci to analyze alloc_file_pseudo as well (this
     will cover pipes and sockets), or maybe convert pipes and sockets
     to FMODE_STREAM manually;
   - extend stream_open.cocci to analyze file_operations that use
     no_llseek or noop_llseek, but do not use nonseekable_open or
     alloc_file_pseudo. This might find files that have stream semantic
     but are opened differently;
   - extend stream_open.cocci to analyze file_operations whose
     .read/.write do not use ppos at all (independently of how file was
     opened);
   - ...
   - after that remove FMODE_ATOMIC_POS and always take f_pos_lock if
     !FMODE_STREAM;
   - gather bug reports for deadlocked read/write and convert missed
     cases to FMODE_STREAM, probably extending stream_open.cocci along
     the road to catch similar cases

  i.e. always take f_pos_lock unless a file is explicitly marked as
  being stream, and try to find and cover all files that are streams"

We have not done the "extend stream_open.cocci to analyze
alloc_file_pseudo" as well, but the previous commit did manually handle
the case of pipes and sockets.

The other case where we can avoid locking f_pos is the "this file
descriptor only has a single user and it is us, and thus there is no
need to lock it".

The second test was correct, although a bit subtle and worth just
re-iterating here.  There are two kinds of other sources of references
to the same file descriptor: file descriptors that have been explicitly
shared across fork() or with dup(), and file tables having elevated
reference counts due to threading (or explicit file sharing with
clone()).

The first case would have incremented the file count explicitly, and in
the second case the previous __fdget() would have incremented it for us
and set the FDPUT_FPUT flag.

But in both cases the file count would be greater than one, so the
"file_count(file) > 1" test catches both situations.  Also note that if
file_count is 1, that also means that no other thread can have access to
the file table, so there also cannot be races with concurrent calls to
dup()/fork()/clone() that would increment the file count any other way.

Link: https://lore.kernel.org/linux-fsdevel/20190413184404.GA13490@deco.navytux.spb.ru
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Eic Dumazet <edumazet@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Marco Elver <elver@google.com>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Paul McKenney <paulmck@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In commit 3975b097 ("convert stream-like files -> stream_open, even
if they use noop_llseek") Kirill used a coccinelle script to change
"nonseekable_open()" to "stream_open()", which changed the trivial cases
of stream-like file descriptors to the new model with FMODE_STREAM.

However, the two big cases - sockets and pipes - don't actually have
that trivial pattern at all, and were thus never converted to
FMODE_STREAM even though it makes lots of sense to do so.

That's particularly true when looking forward to the next change:
getting rid of FMODE_ATOMIC_POS entirely, and just using FMODE_STREAM to
decide whether f_pos updates are needed or not.  And if they are, we'll
always do them atomically.

This came up because KCSAN (correctly) noted that the non-locked f_pos
updates are data races: they are clearly benign for the case where we
don't care, but it would be good to just not have that issue exist at
all.

Note that the reason we used FMODE_ATOMIC_POS originally is that only
doing it for the minimal required case is "safer" in that it's possible
that the f_pos locking can cause unnecessary serialization across the
whole write() call.  And in the worst case, that kind of serialization
can cause deadlock issues: think writers that need readers to empty the
state using the same file descriptor.

[ Note that the locking is per-file descriptor - because it protects
  "f_pos", which is obviously per-file descriptor - so it only affects
  cases where you literally use the same file descriptor to both read
  and write.

  So a regular pipe that has separate reading and writing file
  descriptors doesn't really have this situation even though it's the
  obvious case of "reader empties what a bit writer concurrently fills"

  But we want to make pipes as being stream-line anyway, because we
  don't want the unnecessary overhead of locking, and because a named
  pipe can be (ab-)used by reading and writing to the same file
  descriptor. ]

There are likely a lot of other cases that might want FMODE_STREAM, and
looking for ".llseek = no_llseek" users and other cases that don't have
an lseek file operation at all and making them use "stream_open()" might
be a good idea.  But pipes and sockets are likely to be the two main
cases.

Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Eic Dumazet <edumazet@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Marco Elver <elver@google.com>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Paul McKenney <paulmck@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull cramfs fix from Al Viro:
 "Regression fix, fallen through the cracks"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  cramfs: fix usage on non-MTD device

When both CONFIG_CRAMFS_MTD and CONFIG_CRAMFS_BLOCKDEV are enabled, if
we fail to mount on MTD, we don't try on block device.

Note: this relies upon cramfs_mtd_fill_super() leaving no side
effects on fc state in case of failure; in general, failing
get_tree_...() does *not* mean "fine to try again"; e.g. parsed
options might've been consumed by fill_super callback and freed
on failure.

Fixes: 74f78fc5 ("vfs: Convert cramfs to use the new mount API")
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull last minute virtio bugfixes from Michael Tsirkin:
 "Minor bugfixes all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: fix shrinker count
  virtio_balloon: fix shrinker scan number of pages
  virtio_console: allocate inbufs in add_port() only if it is needed
  virtio_ring: fix return code on DMA mapping fails

Pull input fix from Dmitry Torokhov:
 "Just a single revert as RMI mode should not have been enabled for this
  model [yet?]"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation"

This reverts commit 68b9c5066e39af41d3448abfc887c77ce22dd64d.

Ugh, I really dropped the ball on this one :\. So as it turns out RMI4
works perfectly fine on the X1 Extreme Gen 2 except for one thing I
didn't notice because I usually use the trackpoint: clicking with the
touchpad. Somehow this is broken, in fact we don't even seem to indicate
BTN_LEFT as a valid event type for the RMI4 touchpad. And, I don't even
see any RMI4 events coming from the touchpad when I press down on it.
This only seems to work for PS/2 mode.

Since that means we have a regression, and PS/2 mode seems to work fine
for the time being - revert this for now. We'll have to do a more
thorough investigation on this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20191119234534.10725-1-lyude@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull networking fixes from David Miller:

 1) Validate tunnel options length in act_tunnel_key, from Xin Long.

 2) Fix DMA sync bug in gve driver, from Adi Suresh.

 3) TSO kills performance on some r8169 chips due to HW issues, disable
    by default in that case, from Corinna Vinschen.

 4) Fix clock disable mismatch in fec driver, from Chubong Yuan.

 5) Fix interrupt status bits define in hns3 driver, from Huazhong Tan.

 6) Fix workqueue deadlocks in qeth driver, from Julian Wiedmann.

 7) Don't napi_disable() twice in r8152 driver, from Hayes Wang.

 8) Fix SKB extension memory leak, from Florian Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
  r8152: avoid to call napi_disable twice
  MAINTAINERS: Add myself as maintainer of virtio-vsock
  udp: drop skb extensions before marking skb stateless
  net: rtnetlink: prevent underflows in do_setvfinfo()
  can: m_can_platform: remove unnecessary m_can_class_resume() call
  can: m_can_platform: set net_device structure as driver data
  hv_netvsc: Fix send_table offset in case of a host bug
  hv_netvsc: Fix offset usage in netvsc_send_table()
  net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMIN
  sfc: Only cancel the PPS workqueue if it exists
  nfc: port100: handle command failure cleanly
  net-sysfs: fix netdev_queue_add_kobject() breakage
  r8152: Re-order napi_disable in rtl8152_close
  net: qca_spi: Move reset_count to struct qcaspi
  net: qca_spi: fix receive buffer size check
  net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode
  Revert "net/ibmvnic: Fix EOI when running in XIVE mode"
  net/mlxfw: Verify FSM error code translation doesn't exceed array size
  net/mlx5: Update the list of the PCI supported devices
  net/mlx5: Fix auto group size calculation
  ...

By default s_maxbytes is set to MAX_NON_LFS, which limits the usable
file size to 2GB, enforced by the vfs.

Commit b9b1f8d5 ("AFS: write support fixes") added support for the
64-bit fetch and store server operations, but did not change this value.
As a result, attempts to write past the 2G mark result in EFBIG errors:

 $ dd if=/dev/zero of=foo bs=1M count=1 seek=2048
 dd: error writing 'foo': File too large

Set s_maxbytes to MAX_LFS_FILESIZE.

Fixes: b9b1f8d5 ("AFS: write support fixes")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Servers sending callback breaks to the YFS_CM_SERVICE service may
send up to YFSCBMAX (1024) fids in a single RPC.  Anything over
AFSCBMAX (50) will cause the assert in afs_break_callbacks to trigger.

Remove the assert, as the count has already been checked against
the appropriate max values in afs_deliver_cb_callback and
afs_deliver_yfs_cb_callback.

Fixes: 35dbfba3 ("afs: Implement the YFS cache manager service")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Call napi_disable() twice would cause dead lock. There are three situations
may result in the issue.

1. rtl8152_pre_reset() and set_carrier() are run at the same time.
2. Call rtl8152_set_tunable() after rtl8152_close().
3. Call rtl8152_set_ringparam() after rtl8152_close().

For #1, use the same solution as commit 84811412 ("r8152: Re-order
napi_disable in rtl8152_close"). For #2 and #3, add checking the flag
of IFF_UP and using napi_disable/napi_enable during mutex.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge misc fixes from Andrew Morton:
 "Three fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/ksm.c: don't WARN if page is still mapped in remove_stable_node()
  mm/memory_hotplug: don't access uninitialized memmaps in shrink_zone_span()
  Revert "fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()"

Merge tag 'linux-can-fixes-for-5.4-20191122' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2019-11-22

this is a pull request of 2 patches for net/master, if possible for the
current release cycle. Otherwise these patches should hit v5.4 via the
stable tree.

Both patches of this pull request target the m_can driver. Pankaj Sharma
fixes the fallout in the m_can_platform part, which appeared with the
introduction of the m_can platform framework.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>