ceph_lookup_snap_realm either returns a valid pointer or NULL; there is no
need to check IS_ERR(result).
Reported-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>

If the NULL test is necessary, then the dereference should be moved below
the NULL test.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/).

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>

Error handling code following a kmalloc should free the allocated data.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>

Left over from mount/auth protocol changes.
Signed-off-by: Sage Weil <sage@newdream.net>

Reset the backoff delay when we reopen the connection, so that the delays
for any initial connection problems are reasonable.  We were resetting only
after a successful handshake, which was of limited utility.
Signed-off-by: Sage Weil <sage@newdream.net>

The max_size increase request to the MDS can get lost during an MDS
restart and reconnect.  Reset our requested value after the MDS recovers,
so that any blocked writes will re-request a larger max_size upon waking.

Also, explicit wake session caps after the reconnect.  Normally the cap
renewal catches this, but not in the cases where the caps didn't go stale
in the first place, which would leave writers waiting on max_size asleep.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Yehuda Sadeh <yehuda@newdream.net>

The mds map now uses the global_id as the 'key' (instead of the addr,
which was a poor choice).

This is protocol change.
Signed-off-by: Sage Weil <sage@newdream.net>

We may first learn our fsid from any of the mon, osd, or mds maps
(whichever the monitor sends first).  Consolidate checks in a single
helper.  Initialize the client debugfs entry then, since we need the
fsid (and global_id) for the directory name.

Also remove dead mount code.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

When we open a monitor session, we send an initial AUTH message listing
the auth protocols we support, our entity name, and (possibly) a previously
assigned global_id.  The monitor chooses a protocol and responds with an
initial message.

Initially implement AUTH_NONE, a dummy protocol that provides no security,
but works within the new framework.  It generates 'authorizers' that are
used when connecting to (mds, osd) services that simply state our entity
name and global_id.

This is a wire protocol change.
Signed-off-by: Sage Weil <sage@newdream.net>

Unwind initializing if we get ENOMEM during client initialization.
Signed-off-by: Sage Weil <sage@newdream.net>

We require that ceph_con_close be called before we drop the connection,
so this is unneeded.  Just BUG if con->sock != NULL.
Signed-off-by: Sage Weil <sage@newdream.net>

We want to ceph_con_close when we're done with the connection, before
the ref count reaches 0.  Once it does, do not call ceph_con_shutdown,
as that takes the con mutex and may sleep, and besides that is
unnecessary.
Signed-off-by: Sage Weil <sage@newdream.net>

We occasionally want to make a best-effort attempt to invalidate cache
pages without fear of blocking.  If this fails, we fall back to an async
invalidate in another thread.

Use invalidate_mapping_pages instead of invalidate_inode_page2, as that
will skip locked pages, and not deadlock.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

This helps the user know what's going on during the (involved) reconnect
process.  They already see when the mds fails and reconnect starts.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

It was hidden from sync readdir, but not the cached dcache version.
Signed-off-by: Sage Weil <sage@newdream.net>

We don't get an explicit affirmative confirmation that our caps reconnect,
nor do we necessarily want to pay that cost.  So, take all this code out
for now.
Signed-off-by: Sage Weil <sage@newdream.net>

We need to make sure we only swab the address during the banner once.  So
break process_banner out of process_connect, and clean up the surrounding
code so that these are distinct phases of the handshake.
Signed-off-by: Sage Weil <sage@newdream.net>

We were using the cap_gen to track both stale caps (caps that timed out
due to temporarily losing touch with the mds) and dead caps that did not
reconnect after an MDS failure.  Introduce a recon_gen counter to track
reconnections to restarted MDSs and kill dead caps based on that instead.

Rename gen to cap_gen while we're at it to make it more clear which is
which.
Signed-off-by: Sage Weil <sage@newdream.net>

Make the integer hash function a property of the bucket it is used on.  This
allows us to gracefully add support for new hash functions without starting
from scatch.
Signed-off-by: Sage Weil <sage@newdream.net>

The object will be hashed to a placement seed (ps) based on the pg_pool's
hash function.  This allows new hashes to be introduced into an existing
object store, or selection of a hash appropriate to the objects that
will be stored in a particular pool.
Signed-off-by: Sage Weil <sage@newdream.net>

We were using the (weak) dcache hash function, but it was leaving lower
bits consecutive for consecutive (inode) objects.  We really want to make
the object to pg mapping random and uniform, so use a proper hash function
here.

This is Robert Jenkin's public domain hash function (with some minor
cleanup):
	http://burtleburtle.net/bob/hash/evahash.html

This is a protocol revision.
Signed-off-by: Sage Weil <sage@newdream.net>

These are way to big to be inline.  I missed crush/* when doing the inline
audit for akpm's review.
Signed-off-by: Sage Weil <sage@newdream.net>

No ceph prefix.
Signed-off-by: Sage Weil <sage@newdream.net>

The port is informational only, but we should make it correct.
Signed-off-by: Sage Weil <sage@newdream.net>

Use the __le macro, even though for -1 it doesn't matter.
Signed-off-by: Sage Weil <sage@newdream.net>

The endian conversions don't quite work with the old union ceph_pg.  Just
make it a regular struct, and make each field __le.  This is simpler and it
has the added bonus of actually working.
Signed-off-by: Sage Weil <sage@newdream.net>

We exchange struct ceph_entity_addr over the wire and store it on disk.
The sockaddr_storage.ss_family field, however, is host endianness.  So,
fix ss_family endianness to big endian when sending/receiving over the
wire.
Signed-off-by: Sage Weil <sage@newdream.net>

This keeps bdi setup/teardown in line with client life cycle.
Signed-off-by: Sage Weil <sage@newdream.net>

Even when we encounter a corrupt bucket.  We still BUG().  This fixes
the warning

fs/ceph/crush/mapper.c: In function 'crush_choose':
fs/ceph/crush/mapper.c:352: warning: control may reach end of non-void function
'crush_bucket_choose' being inlined
Signed-off-by: Sage Weil <sage@newdream.net>

Fixes warning
fs/ceph/xattr.c: In function '__build_xattrs':
fs/ceph/xattr.c:353: warning: 'err' may be used uninitialized in this function
Signed-off-by: Sage Weil <sage@newdream.net>

Commit 645a1025 fixes calculation of object
offset for layouts with multiple stripes per object. This updates the
calculation of the length written to take into account multiple stripes per
object.
Signed-off-by: Noah Watkins <noah@noahdesu.com>
Signed-off-by: Sage Weil <sage@newdream.net>

We were incorrectly calculationing of object offset.  If we have multiple
stripe units per object, we need to shift to the start of the current
su in addition to the offset within the su.

Also rename bno to ono (object number) to avoid some variable naming
confusion.
Signed-off-by: Sage Weil <sage@newdream.net>

The object extent offset is the file offset _modulo_ the stripe unit.
The code was correct, the comment was wrong.
Reported-by: Noah Watkins <jayhawk@soe.ucsc.edu>
Signed-off-by: Sage Weil <sage@newdream.net>

Using stripe unit size calculated and saved on the stack to avoid
a redundant call to le32_to_cpu.
Signed-off-by: Noah Watkins <noah@noahdesu.com>
Signed-off-by: Sage Weil <sage@newdream.net>

Usage of non-list.h list_entry function for container_of
functionality replaced with direct use of container_of.
Signed-off-by: Noah Watkins <noah@noahdesu.com>
Signed-off-by: Sage Weil <sage@newdream.net>