- 22 Mar, 2021 40 commits
-
-
Robert Foss authored
In order to support Qualcomm ISP hardware architectures that diverge from older architectures, the CSID subdevice drivers needs to be refactored to better abstract the different ISP hardware architectures. Signed-off-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Robert Foss authored
The CSI-2 spec defines format identifier for Data Type (DT), and how the Decode Format (DF) & Encode Format (EF) are implemented. The spec does however not define the DF, EF or Plain Format (PF) identifiers, as those are vendor specific. Plain formats describe the size of the pixels written by the RDI units to memory. PLAIN8 for example has the size 8 bits, and PLAIN32 32 bits. The appropriate Plain Format is determined by the Decode Format used. The smallest Plain Format that is able to contain a pixel of the used Decode Format is the appropriate one to use. As the vendor specific identifiers differ between hardware generations, split them out into separate headers. Signed-off-by:
-
Robert Foss authored
Add register definitions for version 170 of the Titan architecture and implement support for the RDI output mode. The RDI mode as opposed to the PIX output mode for the VFE unit does not support any ISP functionality. This means essentially only supporting dumping the output of the whatever the CSI decoder receives from the sensor. For example will a sensor outputting YUV pixel format frames, only allow the VFE to dump those frames as they are received by the ISP to memory through the RDI interface. Signed-off-by:
-
Robert Foss authored
In order to support Qualcomm ISP hardware architectures that diverge from older architectures, the VFE subdevice driver needs to be refactored to better abstract the different ISP architectures. Gen1 represents the CAMSS ISP architecture. The ISP architecture developed after CAMSS, Titan, will be referred to as Gen2. Signed-off-by:
-
Robert Foss authored
This driver supports multiple architecture versions of the Qualcomm ISP. The CAMSS architecure which this driver is name after, and with the introduction of this series, the Titan architecture. The ISPIF is an IP-block that is only present in the CAMSS generation of the architecture. In order to support the Titan generation, make the ISPIF an optional subdevice. Signed-off-by:
-
Robert Foss authored
Add enum representing the SDM845 SOC, which incorporates version 170 of the Titan architecture ISP. Signed-off-by:
-
Robert Foss authored
trace_printk() should not be used in production code, since extra memory is used for special buffers whenever trace_puts() is used. Replace it with dev_dbg() which provides all of the desired debugging functionality. Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Reviewed-by:
-
Robert Foss authored
Comment refers to ISPIF, but this is incorrect. Only the VFE interrupts are handled by this function. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Robert Foss authored
Function name in comment is wrong, and was changed to be the same as the actual function name. The comment was changed to kerneldoc format. Signed-off-by:
-
Xiaofeng Cao authored
Change 'inaccesable' to 'inaccessible' Change 'detrmine' to 'determine' Delete 'in' grammatically Signed-off-by:
Xiaofeng Cao <caoxiaofeng@yulong.com> Signed-off-by:
-
Fabio Estevam authored
The imx3 camera driver has been removed a long time ago, so get rid of this unused header file. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Fabio Estevam authored
The imx27/imx25 camera driver has been removed a long time ago, so get rid of this unused header file. Signed-off-by:
-
Bhaskar Chowdhury authored
s/structues/structures/ s/decies/decides/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Hans Verkuil authored
The _FRAME_SKIP_ enums were missing the _VIDEO prefix. Signed-off-by:
-
Hans Verkuil authored
The V4L2_CID_STATELESS_FWHT_PARAMS compound control was missing a proper initialization of the flags field, so after loading the vicodec module for the first time, running v4l2-compliance for the stateless decoder would fail on this control because the initial control value was considered invalid by the vicodec driver. Initializing the flags field to sane values fixes this. Signed-off-by:
-
Hans Verkuil authored
act_len can be uninitialized if usb_bulk_msg() returns an error. Set it to 0 to avoid a KMSAN error. Signed-off-by:
-
Hans Verkuil authored
The timestamp uses microseconds, not nanoseconds, so use %06ld instead of %09ld. Signed-off-by:
-
Hans Verkuil authored
This helps debugging poll problems. Signed-off-by:
-
Hans Verkuil authored
The copyright text is just a comment, not kernel-doc documentation. Signed-off-by:
-
Liu Ying authored
The media bus bit width of MEDIA_BUS_FMT_RGB101010_1X30 is 30. So, 'Bit31' and 'Bit30' cells for the 'MEDIA_BUS_FMT_RGB101010_1X30' row should be spaces instead of '0's. Fixes: 54f38fca ("media: docs: move uAPI book to userspace-api/media") Signed-off-by:
Liu Ying <victor.liu@nxp.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Daniel Niv authored
Add a fix for the memory leak bugs that can occur when the saa7164_encoder_register() function fails. The function allocates memory without explicitly freeing it when errors occur. Add a better error handling that deallocate the unused buffers before the function exits during a fail. Signed-off-by:
Daniel Niv <danielniv3@gmail.com> Signed-off-by:
-
Xiaofeng Cao authored
In Kconfig it should be 'to' In c8sectpfe-core.c it should be 'do' Signed-off-by:
Xiaofeng Cao <cxfcosmos@gmail.com> Acked-by:
-
Ricardo Ribalda authored
The plane size needs to be PAGE_ALIGNED, so it is not possible to have sizes bigger than MAX_INT - PAGE_SIZE. We already check for overflows when that happen: if (size < vb->planes[plane].length) goto free; But it is good to explicitly state our max allowed value, in order to align with the driver expectations. Signed-off-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
-
Mirela Rabulea authored
The driver is located in drivers/media/platform/imx-jpeg, and it applies to the JPEG decoder from i.MX QXP and QM. Signed-off-by:
Mirela Rabulea <mirela.rabulea@nxp.com> Signed-off-by:
-
Mirela Rabulea authored
V4L2 driver for the JPEG encoder/decoder from i.MX8QXP/i.MX8QM application processors. The multi-planar buffers API is used. Baseline and extended sequential jpeg decoding is supported. Progressive jpeg decoding is not supported by the IP. Supports encode and decode of various formats: YUV444, YUV422, YUV420, RGB, ARGB, Gray YUV420 is the only multi-planar format supported. Minimum resolution is 64 x 64, maximum 8192 x 8192. The alignment requirements for the resolution depend on the format, multiple of 16 resolutions should work for all formats. v4l2-compliance tests are passing, including the streaming tests, "v4l2-compliance -s" [hverkuil: fix kernel-doc typos] Signed-off-by: -
Mirela Rabulea authored
These are optional in struct v4l2_jpeg_header, so skip DHT/DQT segment parsing if huffman_tables/quantization_tables were not requested by user, to save time. However, do count them (num_dht/num_dqt). Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Mirela Rabulea authored
In the case we get an invalid stream, such as from v4l2-compliance streaming test, jpeg_next_marker will end up parsing the entire stream. The standard describes the high level syntax of a jpeg as starting with SOI, ending with EOI, so return error if the very first 2 bytes are not SOI. Signed-off-by:
-
Mirela Rabulea authored
According to Rec. ITU-T T.872 (06/2012) 6.5.3 APP14 segment is for color encoding, it contains a transform flag, which may have values of 0, 1 and 2 and are interpreted as follows: 0 - CMYK for images that are encoded with four components - RGB for images that are encoded with three components 1 - An image encoded with three components using YCbCr colour encoding. 2 - An image encoded with four components using YCCK colour encoding. This is used in imx-jpeg decoder, to distinguish between YUV444 and RGB24. Signed-off-by:
-
Mirela Rabulea authored
Add bindings documentation for i.MX8QXP/QM JPEG decoder & encoder driver. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Mirela Rabulea authored
The added format is V4L2_PIX_FMT_YUV24, this is a packed YUV 4:4:4 format, with 8 bits for each component, 24 bits per sample. This format is used by the i.MX 8QuadMax and i.MX 8DualXPlus/8QuadXPlus JPEG encoder/decoder. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Hans Verkuil authored
If CONFIG_I2C=m and CONFIG_CEC_CORE=y then of_find_i2c_device_by_node() is not reachable. So use IS_REACHABLE instead of IS_ENABLED. Signed-off-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Hans Verkuil authored
Fix the following kernel-doc warnings: drivers/media/tuners/it913x.h:28: warning: Function parameter or member 'fe' not described in 'it913x_platform_data' drivers/media/tuners/tda827x.h:34: warning: wrong kernel-doc identifier on line: * Attach a tda827x tuner to the supplied frontend structure. drivers/media/tuners/qt1010.h:20: warning: wrong kernel-doc identifier on line: * Attach a qt1010 tuner to the supplied frontend structure. Signed-off-by:
-
Hans Verkuil authored
Fix these kernel-doc warnings: include/media/davinci/vpbe_osd.h:77: warning: Enum value 'PIXFMT_YCBCRI' not described in enum 'osd_pix_format' include/media/davinci/vpbe_osd.h:77: warning: Enum value 'PIXFMT_YCRCBI' not described in enum 'osd_pix_format' include/media/davinci/vpbe_osd.h:77: warning: Excess enum value 'PIXFMT_YCrCbI' description in 'osd_pix_format' include/media/davinci/vpbe_osd.h:77: warning: Excess enum value 'PIXFMT_YCbCrI' description in 'osd_pix_format' include/media/davinci/vpbe_osd.h:232: warning: expecting prototype for enum davinci_cursor_v_width. Prototype was for enum osd_cursor_v_width instead include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'ns' not described in 'uvc_meta_buf' include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'sof' not described in 'uvc_meta_buf' include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'length' not described in 'uvc_meta_buf' include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'flags' not described in 'uvc_meta_buf' include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'buf' not described in 'uvc_meta_buf' Signed-off-by:
-
Hans Verkuil authored
This fixes these kernel-doc warnings: include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI1A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI1B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI1C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI2A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI2B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI2C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI3A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI3B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI3C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI4A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2A_VI1A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2B_VI1B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2C_VI1C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2A_VI3A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2B_VI3B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2C_VI3C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI1A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI1B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI1C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI3A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI3B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI3C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_INVALID' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:82: warning: Enum value 'OUTPUT_10BIT_422_EMBEDDED_SYNC' not described in enum 'tvp514x_output' include/media/i2c/tvp514x.h:82: warning: Enum value 'OUTPUT_20BIT_422_SEPERATE_SYNC' not described in enum 'tvp514x_output' include/media/i2c/tvp514x.h:82: warning: Enum value 'OUTPUT_10BIT_422_SEPERATE_SYNC' not described in enum 'tvp514x_output' include/media/i2c/tvp514x.h:82: warning: Enum value 'OUTPUT_INVALID' not described in enum 'tvp514x_output' include/media/i2c/adv7343.h:38: warning: cannot understand function prototype: 'struct adv7343_power_mode ' include/media/i2c/s5k4ecgx.h:31: warning: expecting prototype for struct ss5k4ecgx_platform_data. Prototype was for struct s5k4ecgx_platform_data instead include/media/i2c/mt9t112.h:21: warning: cannot understand function prototype: 'struct mt9t112_platform_data ' include/media/i2c/noon010pc30.h:13: warning: Cannot understand * @clk_rate: the clock frequency in Hz include/media/i2c/s5k6aa.h:45: warning: Function parameter or member 'bus_type' not described in 's5k6aa_platform_data' include/media/i2c/tw9910.h:19: warning: cannot understand function prototype: 'enum tw9910_mpout_pin ' include/media/i2c/tw9910.h:36: warning: cannot understand function prototype: 'struct tw9910_video_info ' include/media/i2c/ov772x.h:53: warning: cannot understand function prototype: 'struct ov772x_camera_info ' include/media/i2c/s5c73m3.h:53: warning: Function parameter or member 'bus_type' not described in 's5c73m3_platform_data' drivers/media/i2c/ccs/ccs-quirk.h:50: warning: Function parameter or member 'post_streamoff' not described in 'ccs_quirk' drivers/media/i2c/ccs/ccs-quirk.h:50: warning: Function parameter or member 'flags' not described in 'ccs_quirk' drivers/media/i2c/ccs/ccs-data.h:144: warning: expecting prototype for struct ccs_pdaf_pix_loc_block_desc. Prototype was for struct ccs_pdaf_pix_loc_pixel_desc instead drivers/media/i2c/tvp514x_regs.h:272: warning: Function parameter or member 'token' not described in 'tvp514x_reg' drivers/media/i2c/tvp514x_regs.h:272: warning: Function parameter or member 'reg' not described in 'tvp514x_reg' drivers/media/i2c/tvp514x_regs.h:272: warning: Function parameter or member 'val' not described in 'tvp514x_reg' drivers/media/i2c/m5mols/m5mols.h:69: warning: Function parameter or member 'brightness' not described in 'm5mols_exif' drivers/media/i2c/m5mols/m5mols.h:147: error: Cannot parse struct or union! drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN0' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN1' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN2' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN3' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN4' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN5' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN6' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN7' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_HDMI' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_TTL' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_TXA' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_TXB' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_MAX' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:199: warning: Function parameter or member 'i2c_clients' not described in 'adv748x_state' drivers/media/i2c/adv748x/adv748x.h:199: warning: Function parameter or member 'regmap' not described in 'adv748x_state' Signed-off-by:
-
Hans Verkuil authored
This fixes these kerneldoc warnings: drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'v4l2_dev' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'snd_card' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'name' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'type' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'dma_mode' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'pci_dev' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'mmio' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'dma_ops' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'video_channels' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'audio_channels' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'audio_rate' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'period_size' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'audio_enabled' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'dma_delay_timer' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'pending_dma_en' not described in 'tw686x_dev' drivers/media/pci/tw686x/tw686x.h:143: warning: Function parameter or member 'pending_dma_cmd' not described in 'tw686x_dev' drivers/media/pci/sta2x11/sta2x11_vip.h:25: warning: Function parameter or member 'i2c_id' not described in 'vip_config' drivers/media/pci/sta2x11/sta2x11_vip.h:25: warning: Function parameter or member 'i2c_addr' not described in 'vip_config' Signed-off-by:
-
Hans Verkuil authored
This patch fixes the following kernel-doc warnings: include/uapi/linux/videodev2.h:996: warning: Function parameter or member 'm' not described in 'v4l2_plane' include/uapi/linux/videodev2.h:996: warning: Function parameter or member 'reserved' not described in 'v4l2_plane' include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'm' not described in 'v4l2_buffer' include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'reserved2' not described in 'v4l2_buffer' include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'reserved' not described in 'v4l2_buffer' include/uapi/linux/videodev2.h:1068: warning: Function parameter or member 'tv' not described in 'v4l2_timeval_to_ns' include/uapi/linux/videodev2.h:1068: warning: Excess function parameter 'ts' description in 'v4l2_timeval_to_ns' include/uapi/linux/videodev2.h:1138: warning: Function parameter or member 'reserved' not described in 'v4l2_exportbuffer' include/uapi/linux/videodev2.h:2237: warning: Function parameter or member 'reserved' not described in 'v4l2_plane_pix_format' include/uapi/linux/videodev2.h:2270: warning: Function parameter or member 'hsv_enc' not described in 'v4l2_pix_format_mplane' include/uapi/linux/videodev2.h:2270: warning: Function parameter or member 'reserved' not described in 'v4l2_pix_format_mplane' include/uapi/linux/videodev2.h:2281: warning: Function parameter or member 'reserved' not described in 'v4l2_sdr_format' include/uapi/linux/videodev2.h:2315: warning: Function parameter or member 'fmt' not described in 'v4l2_format' include/uapi/linux/v4l2-subdev.h:53: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_format' include/uapi/linux/v4l2-subdev.h:66: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_crop' include/uapi/linux/v4l2-subdev.h:89: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_mbus_code_enum' include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'min_width' not described in 'v4l2_subdev_frame_size_enum' include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'max_width' not described in 'v4l2_subdev_frame_size_enum' include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'min_height' not described in 'v4l2_subdev_frame_size_enum' include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'max_height' not described in 'v4l2_subdev_frame_size_enum' include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_size_enum' include/uapi/linux/v4l2-subdev.h:119: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_interval' include/uapi/linux/v4l2-subdev.h:140: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_interval_enum' include/uapi/linux/cec.h:406: warning: Function parameter or member 'raw' not described in 'cec_connector_info' include/uapi/linux/cec.h:470: warning: Function parameter or member 'flags' not described in 'cec_event' include/media/v4l2-h264.h:82: warning: Function parameter or member 'reflist' not described in 'v4l2_h264_build_p_ref_list' include/media/v4l2-h264.h:82: warning: expecting prototype for v4l2_h264_build_b_ref_lists(). Prototype was for v4l2_h264_build_p_ref_list() instead include/media/cec.h:50: warning: Function parameter or member 'lock' not described in 'cec_devnode' include/media/v4l2-jpeg.h:122: warning: Function parameter or member 'num_dht' not described in 'v4l2_jpeg_header' include/media/v4l2-jpeg.h:122: warning: Function parameter or member 'num_dqt' not described in 'v4l2_jpeg_header' Signed-off-by:
-
Hans Verkuil authored
The documentation for V4L2_CID_MPEG_VIDEO_BITRATE was missing the word 'Average': this is the average video bitrate. The V4L2_CID_MPEG_VIDEO_BITRATE_PEAK documentation *does* refer to V4L2_CID_MPEG_VIDEO_BITRATE as the average video bitrate. Signed-off-by:
-
Wei Yongjun authored
In case of error, the function i2c_new_dummy_device() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: e6089fec ("media: m88ds3103: Add support for ds3103b demod") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Jia-Ju Bai authored
When kzalloc() fails and state is NULL, no error return code is assigned. To fix this bug, __ret is assigned with -ENOMEM in this case. Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
When sun6i_video_remote_subdev() returns NULL to subdev, no error return code of sun6i_video_start_streaming() is assigned. To fix this bug, ret is assigned with -EINVAL in this case. Reported-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
