- 30 Jan, 2007 1 commit
-
-
Jiri Kosina authored
The apple powerbook people are used to switch the pb_fnmode setting at runtime through writing to sysfs, altering the module parameter value. This was broken for them in 2.6.20-rc1 when generic HID layer was introduced, as the pb_fnmode flag was made per-hiddevice, instead of global variable. This patch moves the pb_fnmode module parameter from usbhid module to hid module, but apart from that retains backward compatibility with respect to changing the mode through sysfs. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 25 Jan, 2007 4 commits
-
-
Simon Bennett authored
Patch adds entries to the HID consumer page for the Firefly Mini IR remote control Signed-off-by: Simon Bennett <simon@levanta.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Jiri Kosina authored
commit d8c8a393 introduced a clash in hid_blacklist for 0x08ca/0x0010 (GTCO vs. AIPTEK). As the vendor of GTCO device doesn't seem to be interested in supporting their legacy HW with this conflicting ids, it is OK to remove it. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Jiri Kosina authored
hid_free_device() doesn't free device->collection (but it does free device->rdesc and device itself). This imposes memory leak. Fix it. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Linus Torvalds authored
-
- 24 Jan, 2007 35 commits
-
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix wrong checksum calculation on 64-bit MIPS [MIPS] VPE loader: Initialize lists before they're actually being used ... [MIPS] Fix reported amount of freed memory - it's in kB not bytes [MIPS] vr41xx: need one more nop with mtc0_tlbw_hazard() [MIPS] SMTC: Fix module build by exporting symbol [MIPS] SMTC: Fix TLB sizing bug for TLB of 64 >= entries [MIPS] Fix APM build [MIPS] There is no __GNUC_MAJOR__
-
Trond Myklebust authored
Prevent the call to invalidate_inode_pages2() from racing with file writes by taking the inode->i_mutex across the page cache flush and invalidate. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Trond Myklebust authored
Fix the Oops in http://bugzilla.linux-nfs.org/show_bug.cgi?id=138 We shouldn't be calling rpc_release_task() for tasks that are not active. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Atsushi Nemoto authored
The commit 8e3d8433 ([NET]: MIPS checksum annotations and cleanups) broke 64-bit MIPS. The problem is the commit replaces some unsigned long with __be32. On 64bit MIPS, a __be32 (i.e. unsigned int) value is represented as a sign-extented 32-bit value in a 64-bit argument register. So the address 192.168.0.1 (0xc0a80001) is passed as 0xffffffffc0a80001 to csum_tcpudp_nofold() but the asm code in the function expects 0x00000000c0a80001, therefore it returns a wrong checksum. Explicit cast to unsigned long is needed to drop high 32bit. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
kspd which due to makefile order happens to be initialized before the vpe loader causes references to vpecontrol lists before they're actually been initialized. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Thiemo Seufer authored
While at it, change message on DEC for consistency. Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
NEC VR4111 and VR4121 need one more nop with mtc0_tlbw_hazard(). Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Definitions for TIF_FREEZE and _TIF_FREEZE were missing. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Alexey Dobriyan authored
Gcc major version number is in __GNUC__. As side effect fix checking with sparse if sparse was built with gcc 4.1 and mips cross-compiler is 3.4. Sparse will inherit version 4.1, __GNUC__ won't be filtered from "-dM -E -xc" output, sparse will pick only new major, effectively becoming gcc version 3.1 which is unsupported. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix oops when Windows server sent bad domain name null terminator [CIFS] cifs sprintf fix [CIFS] Remove 2 unneeded kzalloc casts [CIFS] Update CIFS version number
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (23 commits) [SCTP]: Fix compiler warning. [IP] TUNNEL: Fix to be built with user application. [IPV6]: Fixed the size of the netlink message notified by inet6_rt_notify(). [TCP]: rare bad TCP checksum with 2.6.19 [NET]: Process include/linux/if_{addr,link}.h with unifdef [NETFILTER]: Fix iptables ABI breakage on (at least) CRIS [IRDA] vlsi_ir.{h,c}: remove kernel 2.4 code [TCP]: skb is unexpectedly freed. [IPSEC]: Policy list disorder [IrDA]: Removed incorrect IRDA_ASSERT() [IrDA]: irda-usb TX path optimization (was Re: IrDA spams logfiles - since 2.6.19) [X.25]: Add missing sock_put in x25_receive_data [SCTP]: Fix SACK sequence during shutdown [SCTP]: Correctly handle unexpected INIT-ACK chunk. [SCTP]: Verify some mandatory parameters. [SCTP]: Set correct error cause value for missing parameters [NETFILTER]: fix xt_state compile failure [NETFILTER]: ctnetlink: fix leak in ctnetlink_create_conntrack error path [SELINUX]: increment flow cache genid [IPV6] MCAST: Fix joining all-node multicast group on device initialization. ...
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: mv643xx_eth: Fix race condition in mv643xx_eth_free_tx_descs s2io bogus memset
-
Jeff Garzik authored
-
Brian King authored
Initialize qc->pad_len for each new command. This ensures that pad_len is not set to a stale value for zero data length commands. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Brian King authored
Fixup the inialization of qc->n_elem. It currently gets initialized to 1 for commands that do not transfer any data. Fix this by initializing n_elem to 0 and only setting to 1 in ata_scsi_qc_new when there is data to transfer. This fixes some problems seen with SATA devices attached to ipr adapters. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
Some ATA/ATAPI devices act weirdly after the link is put into slumber mode. Some hang completely requiring physical power removal while others fail to wake up till the link is hardreset a couple of times. The addition of slumber on power down was never driven by real need. It just followed what ahci spec said literally. The spec itself seems faulty in that it doesn't consider devices (not controllers) which don't support link powersaving mode. Theory never matches reality when it comes to dark allys of cheap ATA/ATAPI world. It's just unrealistic to expect vendors to test rarely used link powersaving feature rigorously. This patch makes ahci more friendly to the coldness of reality. This shouldn't have any negative effect - when suspend operation succeeds, we power off the whole machine; otherwise, we wake up everything. I can't see any reason to be so elaborate with powering down the link in the first place. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Robert Hancock authored
Several people reported issues with certain drive commands timing out on sata_nv controllers running in ADMA mode. The commands in question were non-DMA-mapped commands, usually FLUSH CACHE or FLUSH CACHE EXT. From experimentation it appears that the NV_INT_DEV indication isn't always set when a legitimate command completion interrupt is received on a legacy-mode command, at least not on these controllers in ADMA mode. When a command is pending on the port, force the flag on always in the irq_stat value before calling nv_host_intr so that the drive busy state is always checked by ata_host_intr. This also fixes some questionable code in nv_host_intr which called ata_check_status when a command was pending and ata_host_intr returned "unhandled". If the device interrupted at just the wrong time this could cause interrupts to be lost. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
As with JMicron controllers, ULi M5288 sets interface fatal error bit on device error including ATAPI CC. This makes libata hardreset the port on ATAPI CC thus making it impossible to use. Ignore interface fatal error bit on ULi M5288. This fixes bugzilla bug #7837. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Brian Haley authored
> --- a/net/sctp/sm_statefuns.c > +++ b/net/sctp/sm_statefuns.c > @@ -462,24 +461,6 @@ sctp_disposition_t sctp_sf_do_5_1C_ack(const struct sctp_endpoint *ep, > - if (!init_tag) { > - struct sctp_chunk *reply = sctp_make_abort(asoc, chunk, 0); > - if (!reply) > - goto nomem; This introduced a compiler warning, easily fixed. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Masahide NAKAMURA authored
include/linux/if_tunnel.h is broken for user application because it was changed to use __be32 which is required to include linux/types.h in advance but didn't. (This issue is found when building MIPL2 daemon. We are not sure this is the last header to be fixed about __be32.) Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: TAKAMIYA Noriaki <takamiya@po.ntts.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Noriaki TAKAMIYA authored
I think the return value of rt6_nlmsg_size() should includes the amount of RTA_METRICS. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jarek Poplawski authored
The patch "Replace CHECKSUM_HW by CHECKSUM_PARTIAL/CHECKSUM_COMPLETE" changed to unconditional copying of ip_summed field from collapsed skb. This patch reverts this change. The majority of substantial work including heavy testing and diagnosing by: Michael Tokarev <mjt@tls.msk.ru> Possible reasons pointed by: Herbert Xu and Patrick McHardy. Signed-off-by: Jarek Poplawski <jarkao2@o2.pl> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Adrian Bunk authored
After commit d3dcc077, include/linux/if_{addr,link}.h should be processed with unifdef. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
Patrick McHardy authored
With the introduction of x_tables we accidentally broke compatibility by defining IPT_TABLE_MAXNAMELEN to XT_FUNCTION_MAXNAMELEN instead of XT_TABLE_MAXNAMELEN, which is two bytes larger. On most architectures it doesn't really matter since we don't have any tables with names that long in the kernel and the structure layout didn't change because of alignment requirements of following members. On CRIS however (and other architectures that don't align data) this changed the structure layout and thus broke compatibility with old iptables binaries. Changing it back will break compatibility with binaries compiled against recent kernels again, but since the breakage has only been there for three releases this seems like the better choice. Spotted by Jonas Berlin <xkr47@outerspace.dyndns.org>. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Adrian Bunk authored
This patch removes kernel 2.4 compatibility code. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Masayuki Nakagawa authored
I encountered a kernel panic with my test program, which is a very simple IPv6 client-server program. The server side sets IPV6_RECVPKTINFO on a listening socket, and the client side just sends a message to the server. Then the kernel panic occurs on the server. (If you need the test program, please let me know. I can provide it.) This problem happens because a skb is forcibly freed in tcp_rcv_state_process(). When a socket in listening state(TCP_LISTEN) receives a syn packet, then tcp_v6_conn_request() will be called from tcp_rcv_state_process(). If the tcp_v6_conn_request() successfully returns, the skb would be discarded by __kfree_skb(). However, in case of a listening socket which was already set IPV6_RECVPKTINFO, an address of the skb will be stored in treq->pktopts and a ref count of the skb will be incremented in tcp_v6_conn_request(). But, even if the skb is still in use, the skb will be freed. Then someone still using the freed skb will cause the kernel panic. I suggest to use kfree_skb() instead of __kfree_skb(). Signed-off-by: Masayuki Nakagawa <nakagawa.msy@ncos.nec.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
The recent hashing introduced an off-by-one bug in policy list insertion. Instead of adding after the last entry with a lesser or equal priority, we're adding after the successor of that entry. This patch fixes this and also adds a warning if we detect a duplicate entry in the policy list. This should never happen due to this if clause. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Samuel Ortiz authored
With USB2.0 bulk out MTU can be 512 bytes, so checking it only for 64 bytes is incorrect. Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Samuel Ortiz authored
Since we stop using dev_alloc_skb on the IrDA TX frame, we constantly run into the case of the skb headroom being 0, and thus we call skb_cow for every IrDA TX frame. This patch uses a local buffer and memcpy the skb to it, saving us a kmalloc for each of those IrDA TX frames. Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Hendry authored
__x25_find_socket does a sock_hold. This adds a missing sock_put in x25_receive_data. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
Currently, when association enters SHUTDOWN state,the implementation will SACK any DATA first and then transmit the SHUTDOWN chunk. This is against the order required by 2960bis spec. SHUTDOWN must always be first, followed by SACK. This change forces this order and also enables bundling. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
Consider the chunk as Out-of-the-Blue if we don't have an endpoint. Otherwise discard it as before. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-