- 07 Jun, 2014 40 commits
-
-
Justin Lecher authored
commit 98c350cd upstream. Support the caching of large files. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=31182Signed-off-by:
Justin Lecher <jlec@gentoo.org> Signed-off-by:
Suresh Jayaraman <sjayaraman@suse.com> Tested-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: - Adjust context - dentry_open() takes dentry and vfsmount pointers, not a path pointer] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Rui Xiang <rui.xiang@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geyslan G. Bem authored
commit 3edc8376 upstream. In 'decrypt_pki_encrypted_session_key' function: Initializes 'payload' pointer and releases it on exit. Signed-off-by:
Geyslan G. Bem <geyslan@gmail.com> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Pavel Shilovsky authored
commit e2f2886a upstream. Signed-off-by:
Pavel Shilovsky <pshilovsky@etersoft.ru> Signed-off-by:
Steve French <smfrench@gmail.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Steve French authored
commit b1d93356 upstream. setfacl over cifs mounts can remove the default ACL when setting the (non-default part of) the ACL and vice versa (we were leaving at 0 rather than setting to -1 the count field for the unaffected half of the ACL. For example notice the setfacl removed the default ACL in this sequence: steven@steven-GA-970A-DS3:~/cifs-2.6$ getfacl /mnt/test-dir ; setfacl -m default:user:test:rwx,user:test:rwx /mnt/test-dir getfacl: Removing leading '/' from absolute path names user::rwx group::r-x other::r-x default:user::rwx default:user:test:rwx default:group::r-x default:mask::rwx default:other::r-x steven@steven-GA-970A-DS3:~/cifs-2.6$ getfacl /mnt/test-dir getfacl: Removing leading '/' from absolute path names user::rwx user:test:rwx group::r-x mask::rwx other::r-x Signed-off-by:
Jeremy Allison <jra@samba.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Horia Geanta authored
commit 27c5fb7a upstream. GFP_ATOMIC memory allocation could fail. In this case, avoid NULL pointer dereference and notify user. Cc: Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
Horia Geanta <horia.geanta@freescale.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Du, Wenkai authored
commit 47bb27e7 upstream. There have been "i2c_designware 80860F41:00: controller timed out" errors on a number of Baytrail platforms. The issue is caused by incorrect value in Interrupt Mask Register (DW_IC_INTR_MASK) when i2c core is being enabled. This causes call to __i2c_dw_enable() to immediately start the transfer which leads to timeout. There are 3 failure modes observed: 1. Failure in S0 to S3 resume path The default value after reset for DW_IC_INTR_MASK is 0x8ff. When we start the first transaction after resuming from system sleep, TX_EMPTY interrupt is already unmasked because of the hardware default. 2. Failure in normal operational path This failure happens rarely and is hard to reproduce. Debug trace showed that DW_IC_INTR_MASK had value of 0x254 when failure occurred, which meant TX_EMPTY was unmasked. 3. Failure in S3 to S0 suspend path This failure also happens rarely and is hard to reproduce. Adding debug trace that read DW_IC_INTR_MASK made this failure not reproducible. But from ISR call trace we could conclude TX_EMPTY was unmasked when problem occurred. The patch masks all interrupts before the controller is enabled to resolve the faulty DW_IC_INTR_MASK conditions. Signed-off-by:
Wenkai Du <wenkai.du@intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> [wsa: improved the comment and removed typo in commit msg] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Hans de Goede authored
commit f6e6e1b9 upstream. Without this this EEE PC exports a non working WMI interface, with this it exports a working "good old" eeepc_laptop interface, fixing brightness control not working as well as rfkill being stuck in a permanent wireless blocked state. This is not an ideal way to fix this, but various attempts to fix this otherwise have failed, see: References: https://bugzilla.redhat.com/show_bug.cgi?id=1067181 Reported-and-tested-by: lou.cardone@gmail.com Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Marcel Apfelbaum authored
commit 93fa9d32 upstream. When a new device is added below a hotplug bridge, the bridge's secondary bus speed and the device's bus speed must match. The shpchp driver previously checked the bridge's *primary* bus speed, not the secondary bus speed. This caused hot-add errors like: shpchp 0000:00:03.0: Speed of bus ff and adapter 0 mismatch Check the secondary bus speed instead. [bhelgaas: changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=75251 Fixes: 3749c51a ("PCI: Make current and maximum bus speeds part of the PCI core") Signed-off-by:
Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Linus Torvalds authored
commit fa81511b upstream. Checkin: b3b42ac2 x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels disabled 16-bit segments on 64-bit kernels due to an information leak. However, it does seem that people are genuinely using Wine to run old 16-bit Windows programs on Linux. A proper fix for this ("espfix64") is coming in the upcoming merge window, but as a temporary fix, create a sysctl to allow the administrator to re-enable support for 16-bit segments. It adds a "/proc/sys/abi/ldt16" sysctl that defaults to zero (off). If you hit this issue and care about your old Windows program more than you care about a kernel stack address information leak, you can do echo 1 > /proc/sys/abi/ldt16 as root (add it to your startup scripts), and you should be ok. The sysctl table is only added if you have COMPAT support enabled on x86-64, but I assume anybody who runs old windows binaries very much does that ;) Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/CA%2B55aFw9BPoD10U1LfHbOMpHWZkvJTkMcfCs9s3urPr1YyWBxw@mail.gmail.comSigned-off-by:
-
Charles Keepax authored
commit 44330ab5 upstream. The register CLASS_D_CONTROL_1 is marked as volatile because it contains a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1 register. This causes problems for the "Speaker Switch" control, which will report an error if the CODEC is suspended because it relies on a volatile register. To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and manually keep the register cache in sync by updating both bits when changing the mute status. Reported-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Jianyu Zhan authored
commit 5a838c3b upstream. pcpu_chunk_struct_size = sizeof(struct pcpu_chunk) + BITS_TO_LONGS(pcpu_unit_pages) * sizeof(unsigned long) It hardly could be ever bigger than PAGE_SIZE even for large-scale machine, but for consistency with its couterpart pcpu_mem_zalloc(), use pcpu_mem_free() instead. Commit b4916cb1 ("percpu: make pcpu_free_chunk() use pcpu_mem_free() instead of kfree()") addressed this problem, but missed this one. tj: commit message updated Signed-off-by:
Jianyu Zhan <nasa4836@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: 099a19d9 ("percpu: allow limited allocation before slab is online) Signed-off-by:
-
J. Bruce Fields authored
commit a1b8ff4c upstream. The nfsv4 state code has always assumed a one-to-one correspondance between lock stateid's and lockowners even if it appears not to in some places. We may actually change that, but for now when FREE_STATEID releases a lock stateid it also needs to release the parent lockowner. Symptoms were a subsequent LOCK crashing in find_lockowner_str when it calls same_lockowner_ino on a lockowner that unexpectedly has an empty so_stateids list. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
commit 27b11428 upstream. The current code assumes a one-to-one lockowner<->lock stateid correspondance. Signed-off-by:
-
Kinglong Mee authored
commit aa07c713 upstream. After setting ACL for directory, I got two problems that caused by the cached zero-length default posix acl. This patch make sure nfsd4_set_nfs4_acl calls ->set_acl with a NULL ACL structure if there are no entries. Thanks for Christoph Hellwig's advice. First problem: ............ hang ........... Second problem: [ 1610.167668] ------------[ cut here ]------------ [ 1610.168320] kernel BUG at /root/nfs/linux/fs/nfsd/nfs4acl.c:239! [ 1610.168320] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 1610.168320] Modules linked in: nfsv4(OE) nfs(OE) nfsd(OE) rpcsec_gss_krb5 fscache ip6t_rpfilter ip6t_REJECT cfg80211 xt_conntrack rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw auth_rpcgss nfs_acl snd_intel8x0 ppdev lockd snd_ac97_codec ac97_bus snd_pcm snd_timer e1000 pcspkr parport_pc snd parport serio_raw joydev i2c_piix4 sunrpc(OE) microcode soundcore i2c_core ata_generic pata_acpi [last unloaded: nfsd] [ 1610.168320] CPU: 0 PID: 27397 Comm: nfsd Tainted: G OE 3.15.0-rc1+ #15 [ 1610.168320] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 1610.168320] task: ffff88005ab653d0 ti: ffff88005a944000 task.ti: ffff88005a944000 [ 1610.168320] RIP: 0010:[<ffffffffa034d5ed>] [<ffffffffa034d5ed>] _posix_to_nfsv4_one+0x3cd/0x3d0 [nfsd] [ 1610.168320] RSP: 0018:ffff88005a945b00 EFLAGS: 00010293 [ 1610.168320] RAX: 0000000000000001 RBX: ffff88006700bac0 RCX: 0000000000000000 [ 1610.168320] RDX: 0000000000000000 RSI: ffff880067c83f00 RDI: ffff880068233300 [ 1610.168320] RBP: ffff88005a945b48 R08: ffffffff81c64830 R09: 0000000000000000 [ 1610.168320] R10: ffff88004ea85be0 R11: 000000000000f475 R12: ffff880068233300 [ 1610.168320] R13: 0000000000000003 R14: 0000000000000002 R15: ffff880068233300 [ 1610.168320] FS: 0000000000000000(0000) GS:ffff880077800000(0000) knlGS:0000000000000000 [ 1610.168320] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1610.168320] CR2: 00007f5bcbd3b0b9 CR3: 0000000001c0f000 CR4: 00000000000006f0 [ 1610.168320] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1610.168320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1610.168320] Stack: [ 1610.168320] ffffffff00000000 0000000b67c83500 000000076700bac0 0000000000000000 [ 1610.168320] ffff88006700bac0 ffff880068233300 ffff88005a945c08 0000000000000002 [ 1610.168320] 0000000000000000 ffff88005a945b88 ffffffffa034e2d5 000000065a945b68 [ 1610.168320] Call Trace: [ 1610.168320] [<ffffffffa034e2d5>] nfsd4_get_nfs4_acl+0x95/0x150 [nfsd] [ 1610.168320] [<ffffffffa03400d6>] nfsd4_encode_fattr+0x646/0x1e70 [nfsd] [ 1610.168320] [<ffffffff816a6e6e>] ? kmemleak_alloc+0x4e/0xb0 [ 1610.168320] [<ffffffffa0327962>] ? nfsd_setuser_and_check_port+0x52/0x80 [nfsd] [ 1610.168320] [<ffffffff812cd4bb>] ? selinux_cred_prepare+0x1b/0x30 [ 1610.168320] [<ffffffffa0341caa>] nfsd4_encode_getattr+0x5a/0x60 [nfsd] [ 1610.168320] [<ffffffffa0341e07>] nfsd4_encode_operation+0x67/0x110 [nfsd] [ 1610.168320] [<ffffffffa033844d>] nfsd4_proc_compound+0x21d/0x810 [nfsd] [ 1610.168320] [<ffffffffa0324d9b>] nfsd_dispatch+0xbb/0x200 [nfsd] [ 1610.168320] [<ffffffffa00850cd>] svc_process_common+0x46d/0x6d0 [sunrpc] [ 1610.168320] [<ffffffffa0085433>] svc_process+0x103/0x170 [sunrpc] [ 1610.168320] [<ffffffffa032472f>] nfsd+0xbf/0x130 [nfsd] [ 1610.168320] [<ffffffffa0324670>] ? nfsd_destroy+0x80/0x80 [nfsd] [ 1610.168320] [<ffffffff810a5202>] kthread+0xd2/0xf0 [ 1610.168320] [<ffffffff810a5130>] ? insert_kthread_work+0x40/0x40 [ 1610.168320] [<ffffffff816c1ebc>] ret_from_fork+0x7c/0xb0 [ 1610.168320] [<ffffffff810a5130>] ? insert_kthread_work+0x40/0x40 [ 1610.168320] Code: 78 02 e9 e7 fc ff ff 31 c0 31 d2 31 c9 66 89 45 ce 41 8b 04 24 66 89 55 d0 66 89 4d d2 48 8d 04 80 49 8d 5c 84 04 e9 37 fd ff ff <0f> 0b 90 0f 1f 44 00 00 55 8b 56 08 c7 07 00 00 00 00 8b 46 0c [ 1610.168320] RIP [<ffffffffa034d5ed>] _posix_to_nfsv4_one+0x3cd/0x3d0 [nfsd] [ 1610.168320] RSP <ffff88005a945b00> [ 1610.257313] ---[ end trace 838254e3e352285b ]--- Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
-
Romain Izard authored
commit 098507ae upstream. The replacement of the 'count' variable by two variables 'incs' and 'decs' to resolve some race conditions during module unloading was done in parallel with some cleanup in the trace subsystem, and was integrated as a merge. Unfortunately, the formula for this replacement was wrong in the tracing code, and the refcount in the traces was not usable as a result. Use 'count = incs - decs' to compute the user count. Link: http://lkml.kernel.org/p/1393924179-9147-1-git-send-email-romain.izard.pro@gmail.comAcked-by:
Ingo Molnar <mingo@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Fixes: c1ab9cab "merge conflict resolution" Signed-off-by:
Romain Izard <romain.izard.pro@gmail.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Salva Peiró authored
commit e6a62346 upstream. This fixes CVE-2014-1739. Signed-off-by:
Salva Peiró <speiro@ai2.upv.es> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Tim Chen authored
commit 130fa5bc upstream. The crypto algorithm modules utilizing the crypto daemon could be used early when the system start up. Using module_init does not guarantee that the daemon's work queue is initialized when the cypto alorithm depending on crypto_wq starts. It is necessary to initialize the crypto work queue earlier at the subsystem init time to make sure that it is initialized when used. Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 98b0f811 upstream. The English and Korean translations were updated, the Chinese and Japanese weren't. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Ilia Mirkin authored
commit a3d0b121 upstream. There appear to be a crop of new hardware where the vbios is not available from PROM/PRAMIN, but there is a valid _ROM method in ACPI. The data read from PCIROM almost invariably contains invalid instructions (still has the x86 opcodes), which makes this a low-risk way to try to obtain a valid vbios image. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76475Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ben Hutchings authored
commit 3234f5b0 upstream. Fixes: a53268be ('rtlwifi: rtl8192cu: Fix too long disable of IRQs') Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Liu Hua authored
commit 8fad87bc upstream. When we configure CONFIG_ARM_LPAE=y, pfn << PAGE_SHIFT will overflow if pfn >= 0x100000 in copy_oldmem_page. So use __pfn_to_phys for converting. Signed-off-by:
Liu Hua <sdu.liu@huawei.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Christoph Hellwig authored
commit 50c6e282 upstream. Various filesystems don't bother checking for a NULL ACL in posix_acl_equiv_mode, and thus can dereference a NULL pointer when it gets passed one. This usually happens from the NFS server, as the ACL tools never pass a NULL ACL, but instead of one representing the mode bits. Instead of adding boilerplat to all filesystems put this check into one place, which will allow us to remove the check from other filesystems as well later on. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reported-by:
Ben Greear <greearb@candelatech.com> Reported-by: Marco Munderloh <munderl@tnt.uni-hannover.de>, Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Stanislaw Gruszka authored
commit 8834d360 upstream. When disable beaconing we clear register with beacon and newer set it back, what make we stop send beacons infinitely. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Daniele Forsi authored
commit 6ed07d45 upstream. Signed-off-by:
Daniele Forsi <dforsi@gmail.com> Signed-off-by:
-
Victor A. Santos authored
commit f0ef5d41 upstream. Signed-off-by:
Victor A. Santos <victoraur.santos@gmail.com> Signed-off-by:
-
Daniele Forsi authored
commit df602c2d upstream. Even if the USB-to-ATAPI converter supported multiple LUNs, this driver would always detect the same physical device or media because it doesn't use srb->device->lun in any way. Tested with an Hewlett-Packard CD-Writer Plus 8200e. Signed-off-by:
-
Jean-Jacques Hiblot authored
commit 886c7c42 upstream. When using dt resources retrieval (interrupts and reg properties) there is no predefined order for these resources in the platform dev resource table. Also don't expect the number of resource to be always 2. Signed-off-by:
Jean-Jacques Hiblot <jjhiblot@traphandler.com> Acked-by:
Boris BREZILLON <b.brezillon@overkiz.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Alex Deucher authored
commit e9a4099a upstream. Some newer PX laptops have the pci device class set to DISPLAY_OTHER rather than DISPLAY_VGA. This properly detects ATPX on those laptops. Based on a patch from: Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: airlied@gmail.com Signed-off-by:
-
NeilBrown authored
commit 0f62fb22 upstream. If an md array with externally managed metadata (e.g. DDF or IMSM) is in use, then we should not set safemode==2 at shutdown because: 1/ this is ineffective: user-space need to be involved in any 'safemode' handling, 2/ The safemode management code doesn't cope with safemode==2 on external metadata and md_check_recover enters an infinite loop. Even at shutdown, an infinite-looping process can be problematic, so this could cause shutdown to hang. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Viresh Kumar authored
commit 84ea7fe3 upstream. switch_hrtimer_base() calls hrtimer_check_target() which ensures that we do not migrate a timer to a remote cpu if the timer expires before the current programmed expiry time on that remote cpu. But __hrtimer_start_range_ns() calls switch_hrtimer_base() before the new expiry time is set. So the sanity check in hrtimer_check_target() is operating on stale or even uninitialized data. Update expiry time before calling switch_hrtimer_base(). [ tglx: Rewrote changelog once again ] Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: linaro-networking@linaro.org Cc: fweisbec@gmail.com Cc: arvind.chauhan@arm.com Link: http://lkml.kernel.org/r/81999e148745fc51bbcd0615823fbab9b2e87e23.1399882253.git.viresh.kumar@linaro.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Leon Ma authored
commit 012a45e3 upstream. If a cpu is idle and starts an hrtimer which is not pinned on that same cpu, the nohz code might target the timer to a different cpu. In the case that we switch the cpu base of the timer we already have a sanity check in place, which determines whether the timer is earlier than the current leftmost timer on the target cpu. In that case we enqueue the timer on the current cpu because we cannot reprogram the clock event device on the target. If the timers base is already the target CPU we do not have this sanity check in place so we enqueue the timer as the leftmost timer in the target cpus rb tree, but we cannot reprogram the clock event device on the target cpu. So the timer expires late and subsequently prevents the reprogramming of the target cpu clock event device until the previously programmed event fires or a timer with an earlier expiry time gets enqueued on the target cpu itself. Add the same target check as we have for the switch base case and start the timer on the current cpu if it would become the leftmost timer on the target. [ tglx: Rewrote subject and changelog ] Signed-off-by:
Leon Ma <xindong.ma@intel.com> Link: http://lkml.kernel.org/r/1398847391-5994-1-git-send-email-xindong.ma@intel.comSigned-off-by:
-
Stuart Hayes authored
commit 6c6c0d5a upstream. If the last hrtimer interrupt detected a hang it sets hang_detected=1 and programs the clock event device with a delay to let the system make progress. If hang_detected == 1, we prevent reprogramming of the clock event device in hrtimer_reprogram() but not in hrtimer_force_reprogram(). This can lead to the following situation: hrtimer_interrupt() hang_detected = 1; program ce device to Xms from now (hang delay) We have two timers pending: T1 expires 50ms from now T2 expires 5s from now Now T1 gets canceled, which causes hrtimer_force_reprogram() to be invoked, which in turn programs the clock event device to T2 (5 seconds from now). Any hrtimer_start after that will not reprogram the hardware due to hang_detected still being set. So we effectivly block all timers until the T2 event fires and cleans up the hang situation. Add a check for hang_detected to hrtimer_force_reprogram() which prevents the reprogramming of the hang delay in the hardware timer. The subsequent hrtimer_interrupt will resolve all outstanding issues. [ tglx: Rewrote subject and changelog and fixed up the comment in hrtimer_force_reprogram() ] Signed-off-by:
Stuart Hayes <stuart.w.hayes@gmail.com> Link: http://lkml.kernel.org/r/53602DC6.2060101@gmail.comSigned-off-by:
-
Grant Likely authored
commit 58b116bc upstream. When the kernel is built with CONFIG_PREEMPT it is possible to reach a state when all modules loaded but some driver still stuck in the deferred list and there is a need for external event to kick the deferred queue to probe these drivers. The issue has been observed on embedded systems with CONFIG_PREEMPT enabled, audio support built as modules and using nfsroot for root filesystem. The following log fragment shows such sequence when all audio modules were loaded but the sound card is not present since the machine driver has failed to probe due to missing dependency during it's probe. The board is am335x-evmsk (McASP<->tlv320aic3106 codec) with davinci-evm machine driver: ... [ 12.615118] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: ENTER [ 12.719969] davinci_evm sound.3: davinci_evm_probe: ENTER [ 12.725753] davinci_evm sound.3: davinci_evm_probe: snd_soc_register_card [ 12.753846] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: snd_soc_register_component [ 12.922051] davinci-mcasp 4803c000.mcasp: davinci_mcasp_probe: snd_soc_register_component DONE [ 12.950839] davinci_evm sound.3: ASoC: platform (null) not registered [ 12.957898] davinci_evm sound.3: davinci_evm_probe: snd_soc_register_card DONE (-517) [ 13.099026] davinci-mcasp 4803c000.mcasp: Kicking the deferred list [ 13.177838] davinci-mcasp 4803c000.mcasp: really_probe: probe_count = 2 [ 13.194130] davinci_evm sound.3: snd_soc_register_card failed (-517) [ 13.346755] davinci_mcasp_driver_init: LEAVE [ 13.377446] platform sound.3: Driver davinci_evm requests probe deferral [ 13.592527] platform sound.3: really_probe: probe_count = 0 In the log the machine driver enters it's probe at 12.719969 (this point it has been removed from the deferred lists). McASP driver already executing it's probing (since 12.615118). The machine driver tries to construct the sound card (12.950839) but did not found one of the components so it fails. After this McASP driver registers all the ASoC components (the machine driver still in it's probe function after it failed to construct the card) and the deferred work is prepared at 13.099026 (note that this time the machine driver is not in the lists so it is not going to be handled when the work is executing). Lastly the machine driver exit from it's probe and the core places it to the deferred list but there will be no other driver going to load and the deferred queue is not going to be kicked again - till we have external event like connecting USB stick, etc. The proposed solution is to try the deferred queue once more when the last driver is asking for deferring and we had drivers loaded while this last driver was probing. This way we can avoid drivers stuck in the deferred queue. Signed-off-by:
Grant Likely <grant.likely@linaro.org> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by:
-
Josef Gajdusek authored
commit 3a18e139 upstream. The datasheet for EMC1413/EMC1414, which is fully compatible to EMC1403/1404 and uses the same chip identification, references revision numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers from 0x01 to 0x04 to make sure none are missed. Signed-off-by:
Josef Gajdusek <atx@atx.name> [Guenter Roeck: Updated headline and description] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Josef Gajdusek authored
commit 17c048fc upstream. Attempts to set the hysteresis value to a temperature below the target limit fails with "write error: Numerical result out of range" due to an inverted comparison. Signed-off-by:
Jean Delvare <jdelvare@suse.de> [Guenter Roeck: Updated headline and description] Signed-off-by:
-
Chen Yucong authored
commit b985194c upstream. For handling a free hugepage in memory failure, the race will happen if another thread hwpoisoned this hugepage concurrently. So we need to check PageHWPoison instead of !PageHWPoison. If hwpoison_filter(p) returns true or a race happens, then we need to unlock_page(hpage). Signed-off-by:
Chen Yucong <slaoub@gmail.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Tested-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Anthony Iliopoulos authored
commit 9844f546 upstream. The invalidation is required in order to maintain proper semantics under CoW conditions. In scenarios where a process clones several threads, a thread operating on a core whose DTLB entry for a particular hugepage has not been invalidated, will be reading from the hugepage that belongs to the forked child process, even after hugetlb_cow(). The thread will not see the updated page as long as the stale DTLB entry remains cached, the thread attempts to write into the page, the child process exits, or the thread gets migrated to a different processor. Signed-off-by:
Anthony Iliopoulos <anthony.iliopoulos@huawei.com> Link: http://lkml.kernel.org/r/20140514092948.GA17391@server-36.huawei.corpSuggested-by:
Shay Goikhman <shay.goikhman@huawei.com> Acked-by:
Dave Hansen <dave.hansen@intel.com> Signed-off-by:
-
Corey Minyard authored
commit eb6d78ec upstream. The OBF timer in KCS was not reset in one situation when error recovery was started, resulting in an immediate timeout. Reported-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Bodo Stroesser authored
commit 48e8ac29 upstream. With recent changes it is possible for the timer handler to detect an idle interface and not start the timer, but the thread to start an operation at the same time. The thread will not start the timer in that instance, resulting in the timer not running. Instead, move all timer operations under the lock and start the timer in the thread if it detect non-idle and the timer is not already running. Moving under locks allows the last timeout to be set in both the thread and the timer. 'Timer is not running' means that the timer is not pending and smi_timeout() is not running. So we need a flag to detect this correctly. Also fix a few other timeout bugs: setting the last timeout when the interrupt has to be disabled and the timer started, and setting the last timeout in check_start_timer_thread possibly racing with the timer Signed-off-by:
-
Jiri Bohac authored
commit 98a01e77 upstream. On architectures with sizeof(int) < sizeof (long), the computation of mask inside apply_slack() can be undefined if the computed bit is > 32. E.g. with: expires = 0xffffe6f5 and slack = 25, we get: expires_limit = 0x20000000e bit = 33 mask = (1 << 33) - 1 /* undefined */ On x86, mask becomes 1 and and the slack is not applied properly. On s390, mask is -1, expires is set to 0 and the timer fires immediately. Use 1UL << bit to solve that issue. Suggested-by:
Deborah Townsend <dstownse@us.ibm.com> Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Link: http://lkml.kernel.org/r/20140418152310.GA13654@midget.suse.czSigned-off-by:
-
