- 19 Jun, 2012 36 commits
-
-
H Hartley Sweeten authored
The comedi_async 'inttrig' member is a pointer to a callback function. NULL should be used to clear it not 0. This quiets a number of sparse warnings about: Warning: Using plain integer as NULL pointer Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Meerwald authored
Signed-off-by:
Peter Meerwald <pmeerw@pmeerw.net> Acked-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Peter Meerwald authored
Signed-off-by:
-
Peter Meerwald authored
Signed-off-by:
-
Peter Meerwald authored
Signed-off-by:
-
Peter Meerwald authored
beware, does change the ABI as proximity_on_chip_ambient_infrared_supression is changed to proximity_on_chip_ambient_infrared_suppression Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
-
Peter Meerwald authored
just drop execute permission Signed-off-by:
-
Peter Meerwald authored
Signed-off-by:
-
Lars-Peter Clausen authored
Use the new triggered buffer setup helper function to allocate and register buffer and pollfunc. Also as part of the conversion drop scan_timestamp being enabled by default, since it is a left over of an earlier cleanup. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
-
Lars-Peter Clausen authored
Use the new triggered buffer setup helper function to allocate and register buffer and pollfunc. Signed-off-by:
-
Lars-Peter Clausen authored
Use the new triggered buffer setup helper function to allocate and register buffer and pollfunc. Signed-off-by:
-
Lars-Peter Clausen authored
Use the new triggered buffer setup helper function to allocate and register buffer and pollfunc. Also as part of the conversion drop scan_timestamp being enabled by default, since it is a left over of an earlier cleanup. Signed-off-by:
-
Lars-Peter Clausen authored
Use the new triggered buffer setup helper function to allocate and register buffer and pollfunc. Also as part of the conversion drop scan_timestamp being enabled by default, since it is a left over of an earlier cleanup. Signed-off-by:
-
Lars-Peter Clausen authored
Use the new triggered buffer setup helper function to allocate and register buffer and pollfunc. The previous code was not passing the temperature channel to iio_buffer_register since the temperature channel can not be used in buffered mode. With the new helper functions it is not possible to do this, instead the scan index for the temperature channel is set to -1 which will cause iio_buffer_register to ignore the channel. (Also While we are at it also assign the symbolic constant instead of the raw value to the channel address for the temperature channel). Also as part of the conversion drop scan_timestamp being enabled by default, since it is a left over of an earlier cleanup. Signed-off-by:
-
Lars-Peter Clausen authored
Use the new triggered buffer setup helper function to allocate and register buffer and pollfunc. Signed-off-by:
-
Lars-Peter Clausen authored
Use the new triggered buffer setup helper function to allocate and register buffer and pollfunc. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Lars-Peter Clausen authored
Add a helper function for executing the common tasks which are usually involved in setting up a simple software ringbuffer. It will allocate the buffer, allocate the pollfunc and register the buffer. Signed-off-by:
-
Lars-Peter Clausen authored
It is not always the case that all channels can be used in buffered mode. This patch allows channels, which can not be used in buffered mode, to set their scan index to a negative number, which will cause iio_buffer_register to ignore the channel. Signed-off-by:
-
Justin P. Mattock authored
The below patch fixes a typo found while reading through staging/slicoss Signed-off-by:
Justin P. Mattock <justinmattock@gmail.com> Signed-off-by:
-
Justin P. Mattock authored
Fixes some typos that was found while reading through staging/serqt_usb2 Signed-off-by:
-
Miguel Gómez authored
Replace pr_* calls with dev_* ones when the device structure is available. Signed-off-by:
Miguel Gómez <magomez@igalia.com> Signed-off-by:
-
Miguel Gómez authored
Add include files with function definitions to avoid sparse warnings. Signed-off-by:
-
Miguel Gómez authored
Replace meaninful printks with pr_debug and remove useless ones. Signed-off-by:
-
Miguel Gómez authored
XGIFAIL() prints a message and returns a value, but it's used only in one place. Better remove it and replace the call with the macro content. Signed-off-by:
-
Miguel Gómez authored
Define real content of dumpVGAReg() only in debug mode. Remove old condition. Signed-off-by:
-
Miguel Gómez authored
Signed-off-by:
-
Miguel Gómez authored
Remove DEBUGPRN() macro which is defined as empty. Signed-off-by:
-
Miguel Gómez authored
Signed-off-by:
-
H Hartley Sweeten authored
The 'io_bits' variable in the comedi_subdevice struct is a bitmask of the input/output configuration of the the subdevice. It should be an unsigned int to correctly represent this. Signed-off-by:
-
H Hartley Sweeten authored
The comedi_subdevice 'insn_bits' functions return the number of data elements used to perform the command. Most of the insn_bits functions return an open coded '2' to indicate this. The same value is available as 'insn->n'. Return that instead to better indicate what the return means. Signed-off-by:
-
H Hartley Sweeten authored
The comedi core does the sanity check to make sure that the data length the INSN_BITS instruction is 2. There is no need for the drivers to do this check. Remove all the sanity checks in the drivers. Signed-off-by:
-
Ian Abbott authored
Change the usbduxsigma driver to use the new attach_usb() hook in struct comedi_driver to auto-configure probed USB devices after the firmware is loaded. Move the release of the driver's static 'start_stop_sem' semaphore in usbduxsigma_attach() to occur a bit later for convenience, otherwise the new usbduxsigma_attach_common() would need to be split in two. I don't think the slight delay in releasing the semaphore matters too much; it's only used in the USB probe and disconnect functions and when attaching and detaching comedi devices. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
Change the vmv80xx driver to use the new attach_usb() hook in struct comedi_driver to auto-configure probed USB devices after the firmware is loaded. Signed-off-by:
-
Ian Abbott authored
Change the usbduxfast driver to use the new attach_usb() hook in struct comedi_driver to auto-configure probed USB devices after the firmware is loaded. Signed-off-by:
-
Ian Abbott authored
A previous set of patches by Ravishankar Karkala Mallikarjunayya replaced a load of printk() calls with dev_info(), dev_err(), etc. Unfortunately, these used the 'struct device *hw_dev' member of 'struct comedi_device') as the first parameter of these dev_...() calls, but that pointer is usually NULL, so the kernel log messages come out a bit wrong (they contain the phrase "(NULL device *)"). Use the 'struct device *class_dev' member of 'struct comedi_device' instead for these dev_...() calls. It will be non-NULL and somewhat meaningful to users. It's also consistent with those comedi drivers that already use the class_dev member in their dev_...() calls. Some of the messages included the format "comedi%d" with the minor device number used for the "%d". This is now redundant as it will be the same as the dev_name() part of the kernel log message produced by the dev_...() calls. Signed-off-by:
-
Christopher Brannon authored
A local static variable was declared as a pointer to a string constant. We're assigning to the underlying memory, so it needs to be an array instead. Signed-off-by:
Christopher Brannon <chris@the-brannons.com> Signed-off-by:
-
- 15 Jun, 2012 4 commits
-
-
H Hartley Sweeten authored
The depends on PCCARD is redundant. All of the comedi PCMCIA drivers depend on PCMCIA which can only be enabled if PCCARD is enabled. Remove the extra depends check. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
-
Lars-Peter Clausen authored
iio_scan_mask_match() returns NULL if the passed in scan mask is empty. This will happen if no channel has been selected and buffer is enabled. iio_sw_buffer_preenable() will assign NULL to indio_dev->active_scan_mask in this case. As a result iio_update_demux() will cause a NULL pointer deref, because it expects active_scan_mask to be non-NULL. Since it does not make much sense to start data capture if there is no data to capture this patch updates the code to fail gracefully in iio_scan_mask_match() instead of crashing the kernel. Signed-off-by:
-
Peter Meerwald authored
Signed-off-by:
-
Peter Meerwald authored
typos in comments, fix ring_sw module description Signed-off-by:
-
