- 13 Jul, 2022 1 commit
-
-
Bjorn Andersson authored
The timer node needs ranges specified to map the 1-cell children to the 2-cell address range used in /soc. This addition never made it into the patch that was posted and merged, so add it now. Fixes: 152d1faf ("arm64: dts: qcom: add SC8280XP platform") Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Johan Hovold <johan+linaro@kernel.org> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20220707160858.3178771-1-bjorn.andersson@linaro.org
-
- 08 Jul, 2022 4 commits
-
-
Johan Hovold authored
Fix up the DP PHY node which had the wrong unit address. Signed-off-by:
-
Johan Hovold authored
Fix the usb_0 HS PHY reference clock which was mistakingly replaced with the first usb_2 PHY clock. Fixes: 152d1faf ("arm64: dts: qcom: add SC8280XP platform") Signed-off-by:
-
Johan Hovold authored
The recent commit that dropped the PCIe PHY clock index failed to update the PCIe node reference. Fixes: 531c738f ("arm64: dts: qcom: sc7280: drop PCIe PHY clock index") Reported-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
This document was added without placing it at arm book. Fixes: 59228d3b ("dt-bindings: Document how Chromebooks with depthcharge boot") Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
- 07 Jul, 2022 27 commits
-
-
Johan Hovold authored
Clean up the PCIe PHY node by renaming the wrapper node and grouping the child node properties. Signed-off-by:
-
Johan Hovold authored
Clean up the PCIe PHY nodes by using a non-empty ranges property. Signed-off-by:
-
Johan Hovold authored
The QMP UFS PHY provides more than one symbol clock and would need an index to differentiate the clocks, but none of this is described by the binding currently. Drop the incorrect '#clock-cells' property for now. Signed-off-by:
-
Johan Hovold authored
The QMP UFS PHY provides more than one symbol clock and would need an index to differentiate the clocks, but none of this is described by the binding currently. Drop the incorrect '#clock-cells' property for now. Signed-off-by:
-
Johan Hovold authored
The QMP UFS PHY provides more than one symbol clock and would need an index to differentiate the clocks, but none of this is described by the binding currently. Drop the incorrect '#clock-cells' property for now. Signed-off-by:
-
Johan Hovold authored
The QMP USB PHY provides a single clock so drop the redundant clock index. Signed-off-by:
-
Johan Hovold authored
The QMP USB PHY provides a single clock so drop the redundant clock index. Signed-off-by:
-
Johan Hovold authored
The QMP USB PHY provides a single clock so drop the redundant clock index. Signed-off-by:
-
Johan Hovold authored
The QMP USB PHY provides a single clock so drop the redundant clock index. Signed-off-by:
-
Johan Hovold authored
The QMP USB PHY provides a single clock so drop the redundant clock index. Signed-off-by:
-
Johan Hovold authored
Add the missing '#clock-cells' properties to the PCIe QMP PHY nodes. Signed-off-by:
-
Johan Hovold authored
The QMP PCIe PHY provides a single clock so drop the redundant clock index. Signed-off-by:
-
Douglas Anderson authored
This reverts commit afcbe252. The commit in question caused my sc7280-herobrine-herobrine-r1 board not to boot anymore. This shouldn't be too surprising since the driver is relying on the name "cqhci". The issue seems to be that someone decided to change the names of things when the binding moved from .txt to .yaml. We should go back to the names that the bindings have historically specified. For some history, see commit d3392339 ("mmc: cqhci: Update cqhci memory ioresource name") and commit d79100c9 ("dt-bindings: mmc: sdhci-msm: Add CQE reg map"). Fixes: afcbe252 ("arm64: dts: qcom: Fix 'reg-names' for sdhci nodes") Signed-off-by:
-
Dmitry Baryshkov authored
Add the (required) vdss-supply property to the DSI PHY node. Signed-off-by:
-
Dmitry Baryshkov authored
To ease merging of bindings and dts files, the constants were replaced with numeric values. Change them back to defined constants. While we are at it, fix the indentation of these clocks properties to follow established guidelines. Signed-off-by:
-
Dmitry Baryshkov authored
Add missing DSI clock assignments to properly use DSI PHY clocks as DSI byte and pixel clock parents. Signed-off-by:
-
Robert Marko authored
Add reset to SDHCI controller so it can be reset to avoid timeout issues after software reset due to bootloader set configuration. Signed-off-by:
Robert Marko <robimarko@gmail.com> Reviewed-by:
Konrad Dybcio <konrad.dybcio@somainline.org> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Add device node for CPU-memory BWMON device (bandwidth monitoring) on SDM845 measuring bandwidth between CPU (gladiator_noc) and Last Level Cache (memnoc). Usage of this BWMON allows to remove fixed bandwidth votes from cpufreq (CPU nodes) thus achieve high memory throughput even with lower CPU frequencies. Co-developed-by:
Thara Gopinath <thara.gopinath@gmail.com> Signed-off-by:
-
Robert Marko authored
The ARM timer is usually considered not part of SoC node, just like other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning: arch/arm64/boot/dts/qcom/ipq8072-ax9000.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'} From schema: dtschema/schemas/simple-bus.yaml Signed-off-by: -
Kuogee Hsieh authored
Both vdda-1p2-supply and vdda-0p9-supply regulators are controlled by dp combo phy. Therefore remove them from dp controller. Signed-off-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
-
Abel Vesa authored
Switch from the flat PC idle states of sdm845 to OSI hierarchical idle states. The exceptions are the cheza plaftorms, which need to remain with PC idle states. So in order allow all the other platforms to switch, while cheza platforms to remain the same, replace the PC idle states with the OSI ones in the main SDM845 dtsi, and then override the inherited OSI states with PC ones, delete inherited psci cpus nodes, domain idle states and power domain properties. Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Tested-by:
Steev Klimaszewski <steev@kali.org> Acked-by:
-
David Heidelberg authored
First device specific compatible, then general one. Reviewed-by:
David Heidelberg <david@ixit.cz> Signed-off-by:
-
Anton Bambura authored
Adds initial support for the LG G7 (judyln) and LG V35 (judyp) phones. Currently supported features: - Display via simplefb (panel driver is WIP) - Keys - Micro SD card - Modem (not tested much, but initialises) - UFS (crashes during intensive workloads, may need quirks) - USB in peripheral mode Notable missing features: - Enabling WiFi causes a remoteproc crash, so it's disabled here. Needs to be debugged - ideas welcome! Signed-off-by:
Anton Bambura <jenneron@protonmail.com> Signed-off-by:
Stefan Hansson <newbie13xd@gmail.com> Tested-by:
Gregari Ivanov <llamashere@posteo.de> Signed-off-by:
-
Dmitry Baryshkov authored
Add XO clock source to the RPM clock controller. Signed-off-by:
-
Dmitry Baryshkov authored
Add missing GCC clock sources. This includes PCIe and USB PIPE and UFS symbol clocks. Signed-off-by:
-
Dmitry Baryshkov authored
The commit 82d61e19 ("arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child node") moved the '#clock-cells' properties to the child nodes. However it missed the fact that the property must have been set to <0> (as all pipe clocks use of_clk_hw_simple_get as the xlate function. Also the mentioned commit didn't add '#clock-cells' properties to second and third PCIe PHY nodes. Correct both these mistakes: - Set '#clock-cells' to <0>, - Add the property to pciephy_1 and pciephy_2 nodes. Fixes: 82d61e19 ("arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child node") Signed-off-by:
-
Dylan Van Assche authored
Enables the RGB notification LED on the SHIFT 6mq (sdm845-shift-axolotl) with the Qualcomm Light Pulse Generator bindings by Bjorn Andersson [1]. Patches are merged in for-next branch of linux-leds. Tested these changes on the SHIFT 6mq. [1] https://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds.git/commit/?h=for-next&id=a8e53db46f19f67be6a26488aafb7d10c78e33bdSigned-off-by:
Dylan Van Assche <me@dylanvanassche.be> Reviewed-by:
Alexander Martinz <amartinz@shiftphones.com> Tested-by:
Caleb Connolly <caleb@connolly.tech> Reviewed-by:
-
- 06 Jul, 2022 8 commits
-
-
Marijn Suijten authored
These config values have been extracted from CodeLinaro's most recent trinket/sm6125 tag: https://git.codelinaro.org/clo/la/kernel/msm-4.14/-/blob/LA.UM.9.11.r1-05600-NICOBAR.QSSI12.0/arch/arm64/boot/dts/qcom/trinket.dtsiSigned-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by:
-
Marijn Suijten authored
According to qcom,sm6125-pinctrl.yaml all nodes inside the tlmm must be suffixed by -state: qcom/sm6125-sony-xperia-seine-pdx201.dtb: pinctrl@500000: 'sdc2-off', 'sdc2-on' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+' The label names have been updated to match, going from sdc2_state_X to sdc2_X_state. Fixes: cff4bbaf ("arm64: dts: qcom: Add support for SM6125") Fixes: 82e17838 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II") Signed-off-by: -
Marijn Suijten authored
Both the sdc2-on and sdc2-off pinctrl nodes are used by the sdhci@4784000 node in sm6125.dtsi. Surprisingly sdc2-off is defined in sm6125, yet its sdc2-on counterpart is only defined in board-specific DT for the Sony Seine PDX201 board/device resulting in an "undefined label &sdc2_state_on" error if sm6125.dtsi were included elsewhere. This sm6125 base dtsi should not rely on externally defined labels; the properties referencing it should then also be written externally. Since the sdc2-on pin configuration is board-independent just like sdc2-off, move it from seine-pdx201.dts into sm6125.dtsi. The SDCard-detect pin (gpio98) is however board-specific, and remains as an overwrite in seine-pdx201.dts for both the on and off state. As a drive-by cleanup, reorder bias- and drive-strength properties. Fixes: cff4bbaf ("arm64: dts: qcom: Add support for SM6125") Fixes: 82e17838 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II") Signed-off-by:
-
Bjorn Andersson authored
The db820c has 4 "user LEDs", all connected to the PMI8994. The first three are connected to the three current sinks provided by the TRILED and the fourth is connected to MPP2. By utilizing the DTEST bus the MPP is fed the control signal from the fourth LPG block, providing a consistent interface to the user. Signed-off-by:
-
Bjorn Andersson authored
The pmi8994 has 4 multi-purpose-pins, add these to the definition. Signed-off-by:
-
Bjorn Andersson authored
The DB845c has 4 "user LEDs", the last one is already supported as it's just wired to a gpio. Now that the LPG binding is in place we can wire up the other 3 LEDs as well. Signed-off-by:
-
Bjorn Andersson authored
Add PWM/LPG nodes to the PMICs currently supported by the binding. Signed-off-by:
-
Robert Foss authored
Replace &rpmhpd power domain integers with their respective defines in order to improve legibility. Signed-off-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
