- 05 May, 2012 1 commit
-
-
Clemens Ladisch authored
Add the PCI ID of the Asus Xonar DGX card; it's otherwise identical with the DG. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 26 Apr, 2012 1 commit
-
-
Takashi Iwai authored
It contains non-standard call. Reported-by:
Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by:
-
- 24 Apr, 2012 9 commits
-
-
Daniel Mack authored
Also be more specific about some details while at it. Signed-off-by:
Daniel Mack <zonque@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Signed-off-by: -
Andrew Morton authored
sound/usb/endpoint.c: In function 'queue_pending_output_urbs': sound/usb/endpoint.c:298: warning: 'packet' may be used uninitialized in this function Cc: Daniel Mack <zonque@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
Signed-off-by: -
Felix Homann authored
This adds controls for the effects section on the FTU devices. Some of these controls need volume quirks. They are added to mixer.c. [fixed missing break by tiwai] Signed-off-by:
Felix Homann <linuxaudio@showlabor.de> Signed-off-by:
-
Felix Homann authored
This is in preparation for more FTU controls to come. Should help keeping names a bit shorter. Signed-off-by:
-
Felix Homann authored
This adds db gain information to M-Audio Fast Track Ultra (8R) devices. Signed-off-by:
-
Felix Homann authored
Rename mixer_vol_tlv to snd_usb_mixer_vol_tlv and export it to make it reuseable in mixer_quirks.c. Signed-off-by:
-
Felix Homann authored
Merge snd_maudio_ftu_create_ctl() and snd_ebox44_create_ctl() into snd_create_std_mono_ctl(). As opposed to the ftu and ebox-44 specific functions, a TLV callback can be specified for controls created by snd_create_std_mono_ctl(). [fixed minor checkpatch.pl warnings by tiwai] Signed-off-by:
-
- 21 Apr, 2012 1 commit
-
-
Daniel Mack authored
Drop some struct members and definitions that became obsolete during the refactorization of the driver. Signed-off-by:
-
- 18 Apr, 2012 3 commits
-
-
Takashi Iwai authored
-
Ricardo Neri authored
Along with the IEC-60958 channel status word, CEA-861 Audio InfoFrames are used in HDMI and DisplayPort to describe the parameters of the audio stream. Hence, drivers for such devices may use these definitions to, for instance, fill a CEA-861 data structure and pass it to a display driver to configure an IP. Signed-off-by:
Ricardo Neri <ricardo.neri@ti.com> Signed-off-by:
-
Takashi Iwai authored
-
- 15 Apr, 2012 2 commits
-
-
Mark Hills authored
The mixer units from the firmware are corrupt, and even where they are valid they presents mono controls as L and R channels of stereo. Signed-off-by:
Mark Hills <mark@pogo.org.uk> Signed-off-by:
-
Mark Hills authored
Some interfaces reference endpoints which do not exists. To accomodate these, do not fail completely, but skip over them. This allows the Electrix Ebox-44 with earlier firmware to be detected and used for audio. Signed-off-by:
-
- 13 Apr, 2012 9 commits
-
-
Takashi Iwai authored
Many fields have been moved to struct snd_usb_endpoint. Also fix the proc output to correspond to the new structure. Signed-off-by: -
Takashi Iwai authored
ep->fill_max is a 1 bit flag, thus it has to be boolean. sound/usb/endpoint.c: In function 'snd_usb_endpoint_set_params': sound/usb/endpoint.c:785: warning: overflow in implicit constant conversion Signed-off-by: -
Takashi Iwai authored
sound/usb/endpoint.c: In function ‘deactivate_urbs’: sound/usb/endpoint.c:520:16: warning: unused variable ‘flags’ [-Wunused-variable] Signed-off-by: -
Daniel Mack authored
Document the new streaming code and some of the functions so that contributers can catch up easier. Signed-off-by:
-
Daniel Mack authored
Implicit feedback is a streaming mode that does not rely on dedicated sync endpoints but uses the information provided by record streams to clock output streams. Now that the streaming logic is decoupled from the PCM streams, this is easy to implement. Signed-off-by:
-
Daniel Mack authored
Signed-off-by:
-
Daniel Mack authored
With the previous commit that added the new streaming model, all endpoint and streaming related code is now in endpoint.c, and pcm.c only acts as a wrapper for handling the packet's payload. Signed-off-by:
-
Daniel Mack authored
This patch adds a new generic streaming logic for audio over USB. It defines a model (snd_usb_endpoint) that handles everything that is related to an USB endpoint and its streaming. There are functions to activate and deactivate an endpoint (which call usb_set_interface()), and to start and stop its URBs. It also has function pointers to be called when data was received or is about to be sent, and pointer to a sync slave (another snd_usb_endpoint) that is informed when data has been received. A snd_usb_endpoint knows about its state and implements a refcounting, so only the first user will actually start the URBs and only the last one to stop it will tear them down again. With this sort of abstraction, the actual streaming is decoupled from the pcm handling, which makes the "implicit feedback" mechanisms easy to implement. In order to split changes properly, this patch only adds the new implementation but leaves the old one around, so the the driver doesn't change its behaviour. The switch to actually use the new code is submitted separately. Signed-off-by:
-
Daniel Mack authored
This is needed for new card-wide list operations. Signed-off-by:
-
- 10 Apr, 2012 3 commits
-
-
Jesper Juhl authored
release_firmware() deals gracefully with NULL pointers, no need to check first. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Julia Lawall authored
At the point of this error-handling code, both regions and the dma have been allocated, so free it as done in previous and subsequent error-handling code. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
At the point of this error-handling code, HAVE_DSPCODEH may be undefined, so free INITCODE and PERMCODE as done elsewhere. A jump and label are introduced to avoid code duplication. Signed-off-by:
-
- 07 Apr, 2012 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/soundTakashi Iwai authored
ASoC: fixes for 3.4 A bunch of driver-specific fixes and one generic fix for the new support for platform DAPM contexts - we were picking the wrong default for the idle_bias_off setting which was meaning we weren't actually achieving any useful runtime PM on platform devices.
-
Michael Karcher authored
name pins consistently (MIC1/LINE1/HP-OUT/CD) on all controls affecting those pins. remove duplicate SET_AMP_GAIN_MUTE to 0x17/index 0 and 0x17/index 1 really select MIC1, not Mixer out for recording "Mixer out" for recording is not a "pin", adjust comment Signed-off-by:
Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by:
-
Michael Karcher authored
CX20549 (ctx5045) doesn't accept data on index 1 for output pins, as shown in the following hda-var transaction: $ hda-verb /dev/snd/hwC0D0 0x10 set_amp_gain 0xb126 nid = 0x10, verb = 0x300, param = 0xb126 value = 0x0 $ hda-verb /dev/snd/hwC0D0 0x10 get_amp_gain 0x8001 nid = 0x10, verb = 0xb00, param = 0x8001 value = 0x0 Signed-off-by:
-
Michael Karcher authored
The ID used for detection of the BenQ R55E actually identifies the Quanta TW3 ODM design, which is also used for the Gigabyte W551 laptop series. Schematics on the internet clearly indicate that the "Port C" (analog input connected to record source #4 and mixer input #4) is unconnected. Playing an audio CD through analog playback (using cdplay from cdtools) produces no sound, even with the mixer input labelled "CD" enabled, and the volume control in the CD drive set to maximum. This indicates the connection is really not present. Signed-off-by:
-
Michael Karcher authored
The "input converter" widget of the CX20459 has only one input amplifier, expose that one as "Capture Volume/Capture Switch". The actual record source selection is already exposed through the separately installed input mux. Signed-off-by:
-
Michael Karcher authored
This includes renaming "Line In" to line, also in the mixer settings. Signed-off-by:
-
Michael Karcher authored
The CX20549 has only one single input amp on it's input converter widget. Fix printing of values in the codec file in /proc/asound. Signed-off-by:
-
- 06 Apr, 2012 1 commit
-
-
Stephen Warren authored
Commit d4a2eca "ASoC: Tegra I2S: Remove dependency on pdev->id" changed the prototype of tegra_i2s_debug_add, but didn't update the dummy inline used when !CONFIG_DEBUG_FS. Fix that. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: <stable@vger.kernel.org> # 3.3
-
- 05 Apr, 2012 3 commits
-
-
Stephen Warren authored
The ASoC core currently defaults to using STANDBY rather than OFF for idle ASoC platform devices, which causes a permanent pm_runtime_get() on them. This keeps the device active unnecessarily. This can be especially problematic when the ASoC platform device and DAI device are the same device. The distinction between OFF and STANDBY is likely not relevant for ASoC platform drivers, since they aren't analog devices. So, solve this issue by hard-coding idle_bias_off = 1 for all ASoC platform devices. If this turns out to be a problem, this value could be sourced from the snd_soc_platform_driver, similarly to soc_probe_codec(). Note: Prior to this change, this caused a large (10) runtime_active count for the Tegra I2S controller even when not in use, and a leak in that value as streams were started and stopped. This change probably hides a bug. Signed-off-by:
-
Fabio Estevam authored
Check for NULL pointer before accessing it. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Fabio Estevam authored
Doing a 'cat /sys/kernel/debug/audmux/ssi7' causes the following oops to be printed by the kernel: Uhandled fault: external abort on non-linefetch (0x008) at 0xf53b003c Internal error: : 8 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.3.0-00033-gecc726e-dirty #307) PC is at audmux_read_file+0x68/0x2f4 LR is at clk_enable+0x3c/0x48 pc : [<c001b8c8>] lr : [<c00190a0>] psr: a0000013 sp : c3ad3f38 ip : c30a4000 fp : 00000003 r10: 00001000 r9 : be83fb00 r8 : c3ad3f80 r7 : c3ad3f80 r6 : 00000007 r5 : 00031010 r4 : c30a5000 r3 : f53b0000 r2 : 0000003c r1 : 380fa100 r0 : c068dda0 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: 83034000 DAC: 00000015 Process cat (pid: 1042, stack limit = 0xc3ad2270) Stack: (0xc3ad3f38 to 0xc3ad4000) 3f20: c3139180 00000000 3f40: c3bc6500 00001000 be83fb00 c3ad3f80 00001000 c3ad2000 00000000 c0095f3c 3f60: 00000003 c3bc6508 c3bc6500 be83fb00 00000000 00000000 00001000 c0096010 3f80: 00000000 00000000 b6fe2050 00000000 00001000 be83fb00 00000003 00000003 3fa0: c000eb88 c000e9e0 00001000 be83fb00 00000003 be83fb00 00001000 00000000 3fc0: 00001000 be83fb00 00000003 00000003 00000001 00000001 00000000 00000003 3fe0: 000bec8c be83fae0 0000f808 b6ea8d5c 60000010 00000003 7dff7ede 749bedf1 [<c001b8c8>] (audmux_read_file+0x68/0x2f4) from [<c0095f3c>] (vfs_read+0xb0/0x144) [<c0095f3c>] (vfs_read+0xb0/0x144) from [<c0096010>] (sys_read+0x40/0x70) [<c0096010>] (sys_read+0x40/0x70) from [<c000e9e0>] (ret_fast_syscall+0x0/0x2c) Code: e1a02186 e2822004 e3500000 e7935186 (e7937002) ---[ end trace 4d046e31309023de ]--- Fix the ssi port numbers in sysfs to fix this problem. Reported-by:
Joan Carles <joancarles@fqingenieria.es> Signed-off-by:
-
